| Age | Commit message (Collapse) | Author |
|---|
|
* tests/tail-2/wait.sh: Restrict inotify specific test portion
to local file systems and also not with ---disable-inotify specified.
Failure noticed on NFS.
|
|
* tests/rm/rm1.sh: Also remove the group write bit which
was required on one NFS setup at least. Note u-w was
enough to deny file creation, g-w was also required to
deny file removal.
* tests/rm/cycle.sh: Likewise.
* tests/mv/perm-1.sh: Likewise.
|
|
* tests/cp/preserve-slink-time.sh: Add a delay between the
ln and the cp so that there is enough difference between
the timestamps so GPFS won't discard the update.
Reported by Assaf Gordon.
|
|
* tests/misc/shred-passes.sh: Specify an exact amount to shred,
to avoid running out of simulated random data on file systems
with a large st_blksize like GPFS for example.
Reported by Assaf Gordon.
|
|
* tests/misc/head-c.sh: Further increase the limit to 8MB over
the base test command. 5.1MB was seen as minimum extra needed
on FreeBSD 9.3 x86_64.
|
|
* tests/rm/dangling-symlink.sh: The effective delay was only
1.5s. So delay before the operation, and increase the iteration
count by 1 to increase the delay to 6.3s. This failure was
noticed once on a FreeBSD 10.2 x86_64 virtual machine.
* tests/dd/stats.sh: Remove quotes on sleep argument
to ensure arguments are accumulated appropriately.
* tests/du/move-dir-while-traversing.sh: sleep before operation,
to increase the effective delay from 1.6s to 3.2s.
* tests/tail-2/flush-initial.sh: Likewise.
* tests/tail-2/pipe-f2.sh: Sleep first so that the effective delay
matches the commented value.
|
|
* tests/rm/r-root.sh: This test was seen to ERROR due to
sed input not having a terminating '\n'. Therefore just skip
with diagnostics upon failure to adjust the error output with sed.
Reported by Assaf Gordon.
|
|
* tests/install/create-leading.sh: Ensure $PWD is quoted.
Reported by `make dist-check`.
|
|
* init.cfg (dump_mount_list_): A new function to output the
system mount list.
* tests/df/df-symlink.sh: Call dump_mount_list_ upon failure.
* tests/df/over-mount-device.sh: Likewise.
* tests/df/problematic-chars.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/df/total-verify.sh: Likewise.
* tests/df/unreadable.sh: Likewise.
|
|
* tests/df/df-symlink.sh: Only check the symmetry of
the source <-> target lookup, when the source is only mounted once,
which isn't the case if '.' is a BTRFS subvolume for example.
Reported by Assaf Gordon on a default OpenSUSE 42.1 install.
|
|
* tests/misc/date.pl: This test was dependent on perl
unconditionally calling the system localtime() as date(1) does.
However perl has its own configure checks in place to avoid buggy
localtime implementations. Therefore comment out this test
as a FIXME for now. This test was seen to fail on FreeBSD 10
where localtime() returns nonsense values instead of failing
for arguments >= 2^56.
|
|
* tests/misc/head-c.sh: Further increase the limit, to account
for the fact that head(1) needs at least 1.576MB over the base test
command on FreeBSD 10. 4MB should be enough headroom while
still providing over allocation protection.
Reported by Assaf Gordon.
|
|
* src/operand2sig.c (operand2sig): Add a detailed comment explaining
why we validate even very large shell exit status values.
* tests/misc/kill.sh: Add a test case for the ksh scheme.
Simplify the INVALID signal number determination which also avoids
a false failure on systems like FreeBSD 10 with incomplete
signal list (caused by inaccurate NSIG).
|
|
* tests/cp/fiemap-extents.sh: Support RHEL6 fallocate
which doesn't support IEC suffixes like "MiB" on numbers.
Also add some extra framework_failure_ protections.
Reported by Assaf Gordon.
|
|
commit v8.23-31-g90aa291 failed to consider this case,
where the previous rename has failed, thus causing the
following to remove the specified directory:
mv dir dir dir
* src/copy.c (copy_internal): Assume this rename attempt has
succeeded, as a previous failure will already have been handled,
and we don't want to remove the source directory in this case.
* tests/cp/duplicate-sources.sh: Consolidate this test file to...
* tests/mv/dup-source.sh: ...here. Add test cases for same
source and dest.
* tests/local.mk: Remove the consolidated test.
* NEWS: Mention the bug fix.
Reported at https://bugzilla.redhat.com/1297464
|
|
* tests/misc/wc-files0.sh: $fail is always set to 0,
so correct the test to include that part of the test case.
|
|
* src/wc.c (write_counts): Shell escape the file name
if it contains '\n' so only a single line per file is output.
* tests/misc/wc-files0.sh: Add a test case.
* NEWS: Mention the improvement.
|
|
* doc/coreutils.texi (numfmt invocation): Reference the description.
* src/numfmt.c: Parameterize '\n' references.
* tests/misc/numfmt.pl: Add tests for character and field processing.
* NEWS: Mention the new feature.
|
|
* doc/coreutils.texi (paste invocation): Reference -z description.
* src/paste.c (main): Parameterize the use of '\n'.
* tests/misc/paste.pl: Add test cases.
* NEWS: Mention the new feature.
|
|
* src/comm.c (main): Track the output delimiter length,
so that it can be adjusted to 1 for the NUL delimiter.
Also rename the global variable from "delimiter" to
"col_sep" so its use is more obvious, and to distinguish
from the recently added "delim" global variable.
* tests/misc/comm.pl: Adjust accordingly.
|
|
* doc/coreutils.texi (comm invocation): Reference option description.
* src/comm.c (main): Use readlinebuffer_delim() to support
a parameterized delimiter.
* tests/misc/comm.pl: Add test cases.
* NEWS: Mention the new feature.
|
|
* doc/coreutils.texi (tac invocation): Mention the
NUL delineation with an empty --separator.
* src/tac.c (main): Allow an empty separator when -r not specified.
* tests/misc/tac.pl: Add test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/8103
|
|
* doc/coreutils.texi (cut invocation): Reference the description.
* src/cut.c: Parameterize '\n' references.
* tests/misc/cut.pl: Add tests for character and field processing.
* NEWS: Mention the new feature.
|
|
* doc/coreutils.texi: Reference the option description.
* src/head.c: Parameterize the delimiter character.
* src/tail.c: Likewise.
* tests/misc/head.pl: Add test case.
* tests/misc/tail.pl: Likewise.
* NEWS: Mention the new feature.
|
|
* NEWS: Mention the change in behavior.
* doc/coreutils.texi (newlineFieldSeparator): A new description,
referenced from ({join,sort,uniq} invocation).
* src/system.h (field_sep): A new inline function to determine
if a character is a field separator.
* src/join.c (usage): s/whitespace/blank/ to be more accurate
wrt which characters are field separators.
(xfields): s/isblank/field_sep/.
* src/sort.c (inittables): Likewise.
* src/uniq.c (find_field): Likewise.
* tests/misc/join.pl: Adjust -z test, and add a test/example
for processing the whole record with field processing.
* tests/misc/sort.pl: Add -z test cases, including case with '\n'.
* tests/misc/uniq.pl: Add -z -f test case with \n.
|
|
At least the false positive in tail-2/follow-stdin.sh could be seen
on a 4-core i5 system with -j8. Fix similar cases. too.
* tests/tail-2/follow-stdin.sh: Empty the 'out' file in each iteration.
Otherwise, under heavy system load, 'check_tail_output' would see the
expected output from the previous round before tail would have the
chance to come up in the background.
While at it, move the creation of the 'exp' file out of the loop.
* tests/dd/stats.sh: Empty the output file of the background process
here, too.
* tests/misc/cat-buf.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
|
|
Instead of commit v8.24-132-g5171bef which only provides
control to disable this behavior (with -I), provide
the symmetrical "[-]drain" special setting.
* src/stty.c (main): Parse the [-]drain setting instead of -I,
and treat like a global option.
(usage): Adjust accordingly.
* tests/misc/stty.sh: Test "drain" with and without options.
* NEWS: Mention the new feature.
|
|
In some cases an initial drain may block indefinitely as discussed at:
http://lists.gnu.org/archive/html/coreutils/2016-01/msg00007.html
* src/stty.c (main): Use TCSANOW rather than TCSADRAIN if -I specified.
(usage): Document the new option.
* doc/coreutils.texi (stty invocation): Likewise.
* tests/misc/stty.sh: Ensure -I is supported.
* NEWS: Mention the new feature.
|
|
* src/install.c (mkancesdirs_safe_wd): Unconditionally
restore the current working directory when possibly called
multiple times (from install_file_in_dir()).
* tests/install/create-leading.sh: Add a test case.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/21497
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
Problem reported by Linda Walsh in: http://bugs.gnu.org/17505
* NEWS: Document this.
* doc/coreutils.texi (dd invocation): Use a simpler script.
Adjust output example to match new behavior.
* src/dd.c (human_size): Remove.
All uses changed to use human_readable and ...
(human_opts): ... this new constant.
(abbreviation_lacks_prefix): New function.
(print_xfer_stats): Use it. Output both --si and --human-readable
summaries, but only if they have prefixes.
* tests/dd/reblock.sh, tests/dd/stats.sh: Test new behavior.
|
|
* tests/cp/cp-mv-enotsup-xattr.sh: Exclude xattr copy verification
when libxattr is not available.
|
|
* init.cfg (get_min_ulimit_v_): Increase the determined
virtual memory limit for the command by a page size
to avoid alignment issues causing false failures for
subsequent runs.
* tests/misc/cut-huge-range.sh: Be defensive and match
the cut invocations under test, more closely with the
form used to determine the VM memory limit.
This was noticed on i686 linux at:
http://hydra.nixos.org/build/28990456
|
|
* cfg.mk (sc_prohibit_and_fail_1): Remove 'env' from
the exclusion list.
* tests/misc/env.sh: Adjust accordingly.
* tests/misc/help-version.sh: Likewise.
|
|
* tests/misc/kill.sh:
- verify kill -[lt] support multiple parameters.
- verify kill -[lt] fail with (some) invalid parameters.
- Use returns_1 ... || fail=1, rather than ... && fail=1.
|
|
We were erroneously skipping blanks in the marked comparison
_after_ the key start offset was applied.
* src/sort.c (debug_keys): Don't skip starting blanks
if already handled by begfield().
* tests/misc/sort-debug-keys.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/22155
|
|
procps, bash >= 4.4, and util-linux >= 2.23
all have the -L option to output a table.
* src/kill.c (main): Have -L synonymous with -t.
Luckily there is no signal that begins with 'L'.
* tests/misc/kill.sh: Update the test.
|
|
* tests/misc/kill.sh: Add first tests for kill.
* tests/local.mk: Reference the new test.
|
|
* NEWS: Use a standard version specification.
* doc/coreutils.texi: Fix incorrect grammar.
* src/df.c: Update a stale comment.
* src/copy.c: Fix incorrect spellings.
* src/factor.c: Likewise.
* src/ls.c: Likewise.
* src/pr.c: Likewise.
* src/relpath.c: Likewise.
* src/shred.c: Likewise.
* src/sort.c: Likewise.
* src/split.c: Likewise.
* src/stdbuf.c: Likewise.
* tests/misc/seq-precision.sh: Likewise.
|
|
* tests/init.sh (compare_): Only fall back to cmp without
the POSIX defined -s option, where this is not available.
|
|
fallocate can allocate extents beyond EOF via FALLOC_FL_KEEP_SIZE.
Where there is a gap (hole) between the extents, and EOF is within
that gap, the final hole wasn't reproduced, resulting in silent
data corruption in the copied file (size too small).
* src/copy.c (extent_copy): Ensure we don't process extents
beyond the apparent file size, since processing and allocating
those is not currently supported.
* tests/cp/fiemap-extents.sh: Renamed from tests/cp/fiemap-empty.sh
and re-enable parts checking the extents at and beyond EOF.
* tests/local.mk: Reference the renamed test.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/21790
|
|
* src/md5sum.c (digest_check): Update a matched_checksums bool upon
matched checksum, and fail (loudly unless --status is specified)
if there were no matches. Also change properly_formatted_lines
to a bool while at it since we don't need to track the plurality.
* tests/misc/md5sum.pl: Add a test case.
Suggested by Jim Meyering.
|
|
* doc/coreutils.texi (md5sum invocation): Document the new option.
* src/md5sum.c (digest_file): Return an empty digest to indicate
a missing file.
(digest_check): Don't fail or output status given an empty checksum.
(usage): Document the new option.
(main): Process and validate the new option.
* tests/misc/md5sum.pl: Add new test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/15604
|
|
* tests/ls/stat-failed.sh: Skip the test if 'd' is returned as the type,
and document where this was seen. Also flag failure to write small
temp files during the test as an error rather than a failure.
Fixes http://bugs.gnu.org/21130
|
|
discussed in:
http://lists.gnu.org/archive/html/coreutils/2015-10/msg00091.html
* src/csplit.c: (save_line_to_file): check fwrite failures, report
and exit immediately instead of deferring to 'close_output'.
* tests/misc/csplit-io-err.sh: test fwrite failure using LD_PRELOAD.
* tests/local.mk: add new test.
|
|
programs may not be built due to missing system dependencies,
or any program can be excluded at configure time with
--enable-no-install-program. So ensure we're not testing the
system versions in these cases.
* init.cfg (print_ver_): Call require_built_ first.
* tests/misc/tty-eof.pl: Skip programs not built.
* tests/Coreutils.pm (run_tests): Likewise.
* tests/misc/ls-misc.pl: Use 'env test' rather than abs path.
* tests/misc/test-diag.pl: Likewise.
* tests/local.mk: Adjust include order for dependencies.
* tests/misc/arch.sh: Remove redundant calls to require_built_.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/groups-dash.sh: Likewise.
* tests/misc/groups-version.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/cp/acl.sh: Remove problematic call to print_ver_ [gs]etfacl.
* tests/mv/acl.sh: Likewise.
* cfg.mk (sc_env_test_dependencies): A new syntax check to enforce
specifying dependencies with print_ver_ for programs
specified through the env command.
* du/bigtime.sh: Add new print_ver_ dependencies.
* du/max-depth.sh: Likewise.
* dd/ascii.sh: Likewise.
* tests/ls/capability.sh: Likewise.
* tests/ls/root-rel-symlink-color.sh: Likewise.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/readlink-fp-loop.sh: Likewise.
* tests/misc/sort-debug-keys.sh: Likewise.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/touch/no-create-missing.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
* tests/misc/printenv.sh: Tweak to avoid syntax check trigger.
* tests/misc/help-version.sh: Likewise.
* tests/misc/yes.sh: Likewise.
* tests/misc/printf-quote.sh: Use previously unused $prog.
* configure.ac (EXTRA_MANS): Add $gl_no_install_prog to the list
so that check-x-vs-1 syntax check is satisfied.
|
|
It's better to be consistent even though spacing is insignificant:
http://www.in-ulm.de/~mascheck/various/shebang/#blankrequired
|
|
A side effect of this cleanup is we no longer
depend on our own kill command being built.
* init.cfg (require_trap_signame_): A new function to verify
that the shell supports specifying traps by signal name.
(require_kill_group_): A new function to ensure the shell
supports sending a signal to a group.
* tests/du/move-dir-while-traversing.sh: Ensure trap supports
signal names.
* tests/misc/stty-invalid.sh: Likewise.
* tests/misc/stty-pairs.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
* tests/misc/stty.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise. Also simplify trap call.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/dd/stats.sh: Likewise. Also use default kill command.
* tests/misc/timeout-group.sh: Likewise.
|
|
* init.cfg (require_dirent_d_type_): Don't use df -x
to exclude XFS, since this depends on a correct mtab
which is brittle and often not correct within chroots.
* tests/d_type-check: Check also the d_type of files,
which excludes XFS appropriately. Specify all argument
and return types to avoid truncated pointers being passed,
which skipped the test due to crashes on x86_64 at least.
Simplify the C library lookup by reusing the interpreter's.
chroot issue reported at https://bugzilla.redhat.com/1263341
|
|
* src/paste.c (main): Setting the quoting style to "escape"
went against the intent of the comment about presenting
doubled backslashes to the user. Instead use "c-maybe"
which is the only mode which avoids doubled backslashes,
and provides protection against arbitrary control characters.
* tests/misc/paste.pl: Adjust accordingly.
|
