| Age | Commit message (Collapse) | Author |
|---|
|
* tests/misc/sort: Remove one of the generated tests.
363 remain in this file alone.
|
|
* src/sort.c (avoid_trashing_input): Fix an off-by-one error and
guard the use of memmove.
* NEWS (Bug fixes): Mention it.
* tests/misc/sort: Add tests to exercise the offending code.
* THANKS: Update.
Reported by Otavio Salvador in http://bugs.debian.org/525048.
|
|
Remove the optimization that avoided up to 50% of cp's read syscalls.
Do not assume that a short read on a regular file indicates EOF.
When reading from a file in /proc on linux [at least 2.6.9 - 2.6.29]
into a 4k-byte buffer or larger, a short read does not
always indicate EOF. For example, "cp /proc/slabinfo /tmp"
copies only 4068 of the total 7493 bytes. This optimization
(25719a33154f0c62ea9881f0c79ae312dd4cec7a, Improve performance a bit
by optimizing away; 2005-11-24) appears to have been worth less than
a 2% speed-up (and usually much less), so the impact of removing it
is negligible.
* src/copy.c (copy_reg): Don't exit the loop early.
* tests/cp/proc-short-read: New test, lightly based on a suggestion
from Mike Frysinger, to exercise this fix.
* tests/Makefile.am (TESTS): Add cp/proc-short-read.
* NEWS (Improve robustness): Mention this change.
|
|
With newer perl (e.g., Fedora 10's 4:5.10.0-68.fc10), tests/CuTmpdir.pm
stopped removing its temporary directories, with diagnostics like this:
cannot remove path when cwd is /c/coreutils/tests/misc/seq.tmp-e2up \
for /c/coreutils/tests/misc/seq.tmp-e2up: at \
/usr/lib/perl5/5.10.0/File/Temp.pm line 902
Chdir out of the target directory before that code runs:
* tests/CuTmpdir.pm (END): chdir '..'.
(chmod_tree): Remove explicit "chdir $dir".
|
|
* tests/install/install-C: Use 2755 (set-gid), not 1755 (sticky),
to test install -C with non-permission mode bits set. At least on
FreeBSD with a UFS file system, a non-root user may not set the
sticky bit on a non-directory.
|
|
* tests/misc/ls-misc (make_j_d): Rename latter $e to $env
|
|
Steven Parkes reported that `id -G $USER` went into an infinite loop
on Darwin systems for users in more than 10 groups:
http://bugs.gentoo.org/show_bug.cgi?id=264007
* gl/lib/mgetgroups.c (mgetgroups): Work around buggy getgrouplist
implementations that don't update the required size correctly,
by doubling the result buffer and retrying. Also return the
parameter updated by getgrouplist rather than its return value,
as the documentation doesn't actually state the number of groups
stored is returned by getgrouplist.
* tests/misc/id-groups: Add test to exercise this logic
* tests/Makefile.am: Reference new test
* NEWS: Mention the fix
* THANKS: Update
|
|
* README-prereq: s_linux_GNU/Linux_ or s_linux_Linux kernel_
* README-valgrind: ditto
* src/chown-core.c: ditto
* src/dd.c: ditto
* src/df.c: ditto
* src/ls.c: ditto
* src/mv.c: ditto
* src/pwd.c: ditto
* src/remove.c: ditto
* src/shred.c: ditto
* src/stat.c: ditto
* src/su.c: ditto
* src/system.h: ditto
* src/timeout.c: ditto
* src/truncate.c: ditto
|
|
Reported by Samuel Thibault and Stéphane Raimbault, as the glibc fr_FR
locale has recently changed to use the official but variable width
abbreviated month names. Other glibc locales also have variable widths.
http://sourceware.org/ml/libc-locales/2008-q1/msg00035.html
http://sourceware.org/bugzilla/show_bug.cgi?id=9859
* NEWS: Mention the fix
* gl/lib/mbsalign.c: A new module to align and truncate a
string in a specified number of screen cells, while handling
multi-byte characters appropriately.
* gl/lib/mbsalign.h: Ditto
* gl/modules/mbsalign: Ditto
* bootstrap.conf: Reference the new module
* src/ls.c (abmon_init): New function, precompute the abbreviated
months aligned left in a minimum width column <= 5 screen cells.
(align_nstrftime): New function, replace the first %b in the
format specification to strftime with the precomputed month string.
Note using the cached month strings speeds up `ls -lU` by around 17%
on glibc-2.7-2 on linux at least. Also if we implement this function
using heap storage rather than automatic storage, and use snprintf
instead of strcpy, ls will slow down by 2% and 1% respectively
(i.e. a net gain of 14% rather than 17%).
* tests/ls/abmon-align: A new test to test ls alignment for
various formats and locales
* tests/Makefile.am: Reference the new test
|
|
* tests/mv/i-3: Skip if /dev/stdin is unreadable.
Reported by Sergei Steshenko.
|
|
* gnulib-tests/Makefile.am (AUTOMAKE_OPTIONS): Don't define here.
* tests/Makefile.am (AUTOMAKE_OPTIONS): Likewise.
* configure.ac (AM_INIT_AUTOMAKE): Instead, add color-tests and
parallel-tests here.
|
|
* build-aux/check.mk: Remove, not needed any more.
* tests/Makefile.am (AUTOMAKE_OPTIONS): Add parallel-tests and
color-tests.
* tests/check.mk: Do not include build-aux/check.mk any more.
(SUFFIXES, TEST_LOGS): Remove.
(TESTS_ENVIRONMENT): Use $$f rather than $$tst in $PERL invocation.
* gnulib-tests/Makefile.am: Do not include build-aux/check.mk.
(AUTOMAKE_OPTIONS): New macro, add parallel-test and color-tests.
(TEST_LOGS): Remove.
|
|
* tests/sample-test: Don't recommend using lang-default here.
It is now run for each test automatically, via TESTS_ENVIRONMENT.
* tests/dd/reblock: Don't source lang-default here.
* tests/misc/truncate-fail-diag: Likewise.
|
|
* tests/other-fs-tmpdir (CANDIDATE_TMP_DIRS): Remove 2nd /usr/tmp.
|
|
* tests/other-fs-tmpdir (CANDIDATE_TMP_DIRS): Add /dev/shm to the list.
Don't use a line of asterisks as the first line of the "why skipped"
diagnostic, now that that line is printed on 'make check's stderr.
|
|
* tests/install/install-C-root: Skip this test if in set-gid directory.
Reported by Sven Joachim and C de-Avillez.
|
|
* tests/test-lib.sh (skip_if_setgid_): New function.
* tests/setgid-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove setgid-check.
* tests/chmod/c-option: Use the new function rather than sourcing
the separate file.
* tests/cp/cp-parents: Likewise.
* tests/install/install-C: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
|
|
* tests/rm/ext3-perf: Relegate this test to the very_expensive
category, since it is failing too often for me, when run in
parallel (-j4) with other disk-hammering tests. This test fails
when it takes too long, so the fact that it fails under pressure
is an inconvenience more than a real problem.
|
|
* src/pwd.c (longopts): New variable.
(logical_getcwd): New function.
(main): Use it.
(usage): Document new options.
* doc/coreutils.texi (pwd invocation): Likewise.
* NEWS: Likewise.
* TODO (pwd): Mark it done.
* tests/misc/pwd-option: New file.
* tests/Makefile.am (TESTS): Add test.
* THANKS: Update.
Reported by Paul D. Smith, in savannah bug 24949.
|
|
* tests/CuTmpdir.pm (chmod_tree): Do not warn if $dir is undefined.
|
|
* tests/misc/ls-misc: Add names with ~ and ~.1~ suffixes.
|
|
* src/ls.c (print_color_indicator): Don't color hard links if disabled
(when there is an empty hl= in the LS_COLORS environment variable).
* tests/ls/hardlink: Add test case for disabled hard link highlighting.
* NEWS: Mention the change.
|
|
* tests/mkdir/selinux: Accept yet another diagnostic.
Reported by Matthew Woehlke.
|
|
* tests/df/total-verify: Don't use perl's -f option.
Reported by Matthew Woehlke.
|
|
* tests/misc/sort-continue: Don't run cat inside fd-limited shell.
If sort fails to run in an fd-limited shell, skip the test.
|
|
* tests/Makefile.am (TESTS): Add sort-merge-fdlimit.
* tests/misc/sort-merge-fdlimit: New file.
* doc/coreutils.texi (sort invocation): Document that we now silently
lower nmerge if necessary.
Patch by Paul Eggert, Nima Nikzad, Max Chang, Alexander Nguyen,
Sahil Amoli, and Nick Graham.
|
|
This is an alternative to my 9 March patch labeled "Silently lower
nmerge; don't (sometimes incorrectly) range-check"
<http://lists.gnu.org/archive/html/bug-coreutils/2009-03/msg00070.html>.
It differs by not using 'dup' to probe for extra file descriptors;
instead, it simply calls 'open' (and 'pipe') to open files and pipes,
until one of these calls fails due to file descriptor exhaustion; it
then backs off by 1, does a merge with the files that it has opened,
and then retries with the (now-smaller) number of files.
This patch requires quite a few more changes to the source code than
the earlier patch, but it is in some sense "better" because it doesn't
need to call "dup" ahead of time in order to decide whether "open" or
"pipe" will fail. Also, it's more robust in the case where "open" or
"pipe" fails with errno==EMFILE because some system-wide limit is
exhausted.
* src/sort.c (create_temp_file): New arg SURVIVE_FD_EXHAUSTION.
(stream_open): New function, containing guts of xfopen.
(xfopen): Use it.
(pipe_fork): Set errno on failure.
(maybe_create_temp): New function, containing guts of create_temp.
(create_temp): Use it.
(open_temp): Distinguish failures due to file descriptor exhaustion
from other failures, and on fd exhaustion return a notice to caller
rather than dying. Don't test execlp's return value; when it returns,
it *always* returns -1.
(open_input_files): New function.
(mergefps): New arg FPS. It's now the caller's responsibility to open
the input and output files. All callers changed.
(mergefiles): New function.
(avoid_trashing_input, merge): Handle the case where a single merge
can't merge as much as we wanted due to file descriptor exhaustion, by
merging as much as we can and then retrying.
* tests/Makefile.am (TESTS): Add misc/sort-continue.
* tests/misc/sort-continue: New file.
* THANKS: Add Glen Lenker and Matt Pham who coauthored this patch.
|
|
* tests/sort-time/Makefile: Remove long-unused file.
|
|
* tests/misc/groups-version: groups is now independent of id.
|
|
* tests/misc/groups-dash: Skip if groups is not being installed.
Suggested by Mike Frysinger.
Also fail if groups exits with nonzero status.
|
|
* copy.c (copy_attr_by_fd): Reduce xattr diagnostics for 'cp -a'.
(copy_attr_by_name): Likewise.
* cp.c (main): Preserve xattrs with -a option, when possible.
* doc/coreutils.texi: Document that xattrs are preserved with
cp -a, with no added diagnostics.
* NEWS: Mention the change.
* tests/misc/xattr: Add tests for 'cp --preserve=all' and 'cp -a'.
|
|
Introduced by commit 790892db, 2006-06-08 "Ensure that cat works ...".
* NEWS: Mention the bugfix.
* src/cat.c (cat): Fix the typo which stopped the writing
of processed data before a blocking read() is done.
* tests/misc/cat-buf: Add to ensure processed data is not buffered.
* tests/Makefile.am: Reference the new test.
|
|
* tests/misc/comm (ooo-prefix): Add a test for today's fix.
* NEWS (Bug fixes): Mention it.
|
|
* tests/misc/ls-misc (version-sort): New test.
(mk_file): New function.
Reported by Josh Triplett in <http://bugs.debian.org/517558>.
Details in http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/16902
* NEWS (Bug fixes): Mention it.
|
|
* src/pr.c (print_header): Honor chars_per_margin also for the header.
Inspired by a patch from C de-Avillez.
This change also adjusts two other %*s directives to be %*.*s instead,
(for the padding on either side of "file_text") to correct a bug that
could make pr print one space of padding instead of none.
* NEWS (Bug fixes): Mention it.
* tests/pr/o3Jml24f-lm-lo: Adjust for new expected output.
* tests/pr/o3a3Sl24f-tn: Likewise.
* tests/pr/o3a3Snl24f-tn: Likewise.
* tests/pr/o3a3l24f-tn: Likewise.
* tests/pr/o3b3Sl24f-tn: Likewise.
* tests/pr/o3b3Snl24f-tn: Likewise.
* tests/pr/o3b3l24f-tn: Likewise.
* tests/pr/o3mSl24f-bl-tn: Likewise.
* tests/pr/o3mSnl24fbltn: Likewise.
* tests/pr/o3ml24f-bl-tn: Likewise.
|
|
* tests/rm/ext3-perf: Fix typo in commit 2b1e6636bea,
2009-02-27 "tests: rm/ext3-perf: relax this test".
|
|
* tests/rm/ext3-perf: If set-up takes too long, use the set-up time
as the removal time limit. Otherwise, a parallel "make check" would
usually fail when run with RUN_VERY_EXPENSIVE_TESTS=yes.
|
|
* tests/setgid-check: The change in ls (use ".", not "+") caused
this check always to report the working directory as set-gid.
Now, use stat, not ls.
|
|
* tests/mkdir/perm: Now that this test is no longer always skipped,
make it work independently of ls: use stat, not ls, to get perm string.
* test-lib.sh (rwx_to_mode_): Use stat, not ls to get perm string
This test was run only when RUN_VERY_EXPENSIVE_TESTS=yes was set.
|
|
* tests/test-lib.sh: Redirect also to descriptor 9.
Better one-line why-skip diagnostics.
* tests/check.mk (TESTS_ENVIRONMENT): Redirect 9 to stderr.
* tests/misc/pwd-unreadable-parent: Remove redundant "skipping..." diag.
|
|
* tests/misc/sort: On Fedora 8 at least, sort -k1b,1
mishandles blanks in multibyte locales, so add test.
|
|
Running "mkdir dir; cp -rl dir dir" would create dir/dir/dir/...
rather than diagnosing the "copy-into-self" failure.
The easy fix would have been to revert this part of the change
[3ece0355 2008-11-09 cp: use far less memory in some cases]
that introduced the bug:
- remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
+ if (!x->hard_link)
+ remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
However, that would have induced the failure of the new cp/link-heap
test, due to the added memory pressure of recording 10k dev/ino pairs.
And besides, I liked that improvement and wanted to keep it.
Now that it's obvious recording the just-created-directory dev/ino
needn't depend on the setting of hard_link, I realized it is necessary
to record the pair only for the first directory created for each
source command-line argument.
I made that change, then noticed the new test, cp -rl a d d, would pass
when run once, yet output the into-self diagnostic twice. Also note
the side effect: it creates d/a and d/d. However, running that same
command a second time, now with the modified directory, would fail.
That turned out to be due to the fact that although the first into-self
failure was detected in copy_dir, that function would continue copying
other entries regardless -- and that would make it fail (eventually)
with the unwanted recursion.
* src/copy.c (copy_internal): This function needed an indicator of
whether, for a give command line argument, it had already created its
first directory. If so, no more need to record dev/ino pairs. If this
is the first, then do record its pair. Hence, the new parameter.
(copy_dir, copy): Update callers.
(copy_dir): Upon any into-self failure, break out of the loop.
* tests/cp/into-self: Test for the above.
Reported by Mikael Magnusson.
|
|
* tests/misc/stty-row-col: Don't hang when run in background
at least on Solaris 10 and OpenBSD.
|
|
* src/sort.c: When no specific number of chars to skip
is specified for the end field, always skip the whole field.
Also never include leading spaces from next field.
* tests/misc/sort: Add 2 new tests for these cases.
* NEWS: Mention this bug fix.
* THANKS: Add bug reporter.
Reported by Davide Canova.
|
|
* tests/dd/skip-seek-past-file: Just check for
the non system specific part of the error strings.
This was causing an erroneous failure on NetBSD 1.6 at least.
|
|
* tests/ls/color-clear-to-eol: Use \33, not \e for ascii ESC.
This test failed when using the built-in printf of /bin/sh from
NetBSD 1.6.
|
|
Revert "tests: skip newly-modified tests unconditionally..."
This reverts commit 773a88d33f68e50a2919c8a8310c646a7e5fabc2.
* tests/misc/stty: Don't skip.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Likewise.
|
|
* tests/install/install-C: Use setgid-check.
|
|
* tests/misc/stty-invalid: Skip.
* tests/misc/stty: Likewise.
* tests/mv/i-3: Likewise.
|
|
Running "make check &" would hang due to SIGTTOU and SIGTTIN signals.
* tests/misc/stty: Ignore SIGTTOU.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Ignore SIGTTIN.
|
