Age | Commit message (Collapse) | Author |
|
E.g.,
-test "$VERBOSE" = yes && { env -- pwd --version; readlink --version; }
+print_ver_ pwd readlink
-test "$VERBOSE" = yes && { stdbuf --version; mv --version; }
+print_ver_ stdbuf mv
Use this command:
git grep -l 'VERBOSE.*--version'|xargs perl -ni \
-e '/^test "\$VERBOSE" = yes && { .*--version/ or print,next;' \
-e 's/env -- //g;' \
-e 's/test "\$VERBOSE" = yes && { /print_ver_ /;' \
-e ' s/(\w+) --version;/$1/g; s/ *}$//; print'
|
|
E.g.,
-test "$VERBOSE" = yes && env -- pwd --version
+print_ver_ pwd
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && env -- (\w+) --version/print_ver_ $1/'
|
|
Automatically make all of the changes like this:
-test "$VERBOSE" = yes && chgrp --version
+print_ver_ chgrp
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
|
|
* tests/init.cfg (print_ver_): New function.
|
|
* tests/test-lib.sh: Remove file. No longer used.
* tests/Makefile.am (EXTRA_DIST): Remove it here, too.
* tests/sample-test: Correct a comment.
|
|
RHS='. "\${srcdir=.}/init.sh"; path_prepend_ ../src'
git grep -l test-lib.sh \
| xargs perl -pi -e 's,^\. \$srcdir/test-lib\.sh$,'"$RHS",
|
|
|
|
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
|
|
|
|
* src/split.c (main): Error if -[bC] value > OFF_T_MAX
* tests/misc/split-fail: Adjust for the new lower limits
|
|
* doc/coreutils.texi (csplit invocation): Say that %d and %i are
aliases for %u.
* src/csplit.c (FLAG_THOUSANDS, FLAG_ALTERNATIVE): New constants.
(get_format_flags): Now take char const * and int * and return
size_t. It now stores info about the flags instead of merely
scanning them. Also, it handles '0' correctly. Drop support for
the undocumented '+' and ' ' flags since the value is unsigned.
Add support for the (undocumented) "'" flag. All uses changed.
(get_format_width, get_format_prec): Remove.
(check_format_conv_type): Renamed from get_format_conv_type, with
a different signature. It now converts the format to one that is
compatible with unsigned int, and checks flags. All uses changed.
(max_out): Have snprintf compute the number of bytes needed rather
than attempting to do it ourselves (which doesn't work portably
with outlandish formats such as %4294967296d).
(check_format_conv_type, main): Check for overflow in size
calculations. Don't assume size_t fits in unsigned int.
* tests/misc/csplit: Check for proper handling of flags, with
%0#6.3x. Coreutils 8.6 mishandles this somewhat-weird example.
|
|
* src/csplit.c (free_buffer): Also free the line offsets buffers
(remove_line): Also free the containing structure
* tests/misc/csplit-heap: A new test to trigger with leaks of
this magnitude.
* tests/Makefile.am: Reference the new test
* NEWS: Mention the fix
Reported by David Hofstee
|
|
* tests/misc/csplit-1000: Fix comments and --version invocation.
|
|
Without this fix, seq 1000 | csplit - /./ '{*}' would write
the NUL-terminated file name, xx1000, into a buffer of size 6.
* src/csplit.c (main): Use properly sized file name buffer.
* NEWS (Bug fixes): Mention it.
* tests/misc/csplit-1000: New test to trigger the bug.
* tests/Makefile.am (TESTS): Add misc/csplit-1000.
|
|
* tests/mv/i-3: Adjust so that the symlink is resolved
before redirecting to the background command, as otherwise
the stdin descriptor passed to the command will fail the
isatty() or ttyname() test.
|
|
* tests/init.cfg (retry_delay_): Adjust awk script to print a single
floating point value, rather than many.
|
|
because dash-0.5.6-2.fc14.x86_64 would also be disqualified.
This reverts part of yesterday's commit 6c058b2d, "tests: avoid
failure due to bug in FreeBSD 8.1's /bin/sh". Note that the offending
aspect of those shells is not officially a bug, since "local" is not
specified by POSIX. However, it is very unintuitive that prepending
"local" to an existing, standards-compliant assignment would evoke
such a fundamental change in semantics.
* tests/init.sh: Remove snippet requiring sane "local" support.
Upstream dash bug report:
http://thread.gmane.org/gmane.comp.shells.dash/419
|
|
* src/stat.c (digits, printf_flags): New static vars.
(make_format): New function.
(out_string, out_int, out_uint, out_uint_o, out_uint_x):
(out_minus_zero): Use it to avoid undefined behavior when invoking
printf.
(print_it): Check for invalid conversion specifications such as
%..X and %1-X, which would otherwise rely on undefined behavior
when invoking printf.
* tests/misc/stat-nanoseconds: Check that the "I" printf flag
doesn't mess up in the C locale, as it formerly did on non-GNU
hosts.
|
|
* tests/init.sh: Arrange not to accept FreeBSD 8.1's /bin/sh, since
it fails this test: /bin/sh -c 'f(){ local s=$IFS; test -n "$s"; }; f'
* tests/init.cfg (sanitize_path_): Stop-gap measure to work around
a bug in FreeBSD 8.1's /bin/sh. We'll un-do this change once all
300+ tests use init.sh.
|
|
* NEWS: Document this.
* doc/coreutils.texi (stat invocation): Likewise.
* gl/lib/fstimeprec.c, gl/lib/fstimeprec.h, gl/modules/fstimeprec:
* gl/modules/fstimeprec-tests, gl/tests/test-fstimeprec.c:
New files.
* bootstrap.conf (gnulib_modules): Add fstimeprec.
* src/stat.c: Include fstimeprec.h. Don't include xstrtol.h.
(decimal_point, decimal_point_len): New static vars.
(main): Initialize them.
(epoch_sec, out_ns): Remove.
(out_int, out_uint): Now returns whatever printf returned.
(out_minus_zero, out_epoch_secs): New functions.
(print_stat): Use out_epoch_sec instead of out_ns and epoch_sec.
(print_stat, print_it, usage): Remove the %:X-style formats.
* tests/misc/stat-nanoseconds: Set TZ=UTC0 to avoid problems
with weird time zones. Use a time stamp near the Epoch so that we
don't have to worry about leap seconds. Redo test cases to match
new behavior.
* tests/touch/60-seconds: Change %Y.%:Y to %.9Y, to adjust to
new behavior.
|
|
This reverts part of the recent commit 9069af45,
"stat: print timestamps to full resolution", which made %X, %Y, %Z
print floating point numbers. We prefer to retain portability of
%X, %Y and %Z uses, while still providing access to full-resolution
time stamps via modified format strings. Also make the new
%W consistent.
* src/stat.c: Include "xstrtol.h".
(print_it): Accept a new %...:[XYZ] format directive,
e.g., %:X, to print the nanoseconds portion of the corresponding time.
For example, %3.3:Y prints the zero-padded, truncated, milliseconds
part of the time of last modification.
(print_it): Update print_func signature to match.
(neg_to_zero): New helper function.
(epoch_time): Remove function; replace with...
(epoch_sec): New function; use timetostr.
(out_ns): New function. Use "09" only when no other modifier
is specified.
(print_statfs): Change type of "m" to unsigned int,
now that it must accommodate values larger than 255.
(print_stat): Likewise.
Map :X to a code of 'X' + 256. Likewise for Y, Z and W.
(usage): Update.
* tests/touch/60-seconds: Use %Y.%:Y in place of %Y.
* tests/misc/stat-nanoseconds: New file.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Changes in behavior): Mention this.
With improvements by Pádraig Brady.
Thanks to Andreas Schwab for raising the issue.
|
|
* tests/ls/stat-free-symlinks: strace currently outputs an
informational message about arch difference to stdout.
Therefore we need to strip that before comparison.
|
|
* doc/coreutils.texi (cp invocation): Change the description slightly
so as users might not immediately discount using this option.
Mention that --reflink is overridden by the other linking options and
--attributes-only, and give an example where this might be useful.
* src/copy.c (copy_internal): Bypass the reflink if
--attributes-only is specifed.
* tests/cp/reflink-perm: Ensure both --reflink modes are
overridden by --attributes-only.
* NEWS: Mention the change in behavior.
Reported by Jim Meyering.
|
|
* tests/misc/ls-time: Mention that this test also fails on btrfs,
at least until http://bugzilla.redhat.com/591068 is addressed.
|
|
* src/du.c (show_date): Fix call to fputs with a buffer that
contains some uninitialized data.
* tests/Makefile.am (TESTS): Add du/big-timestamp.
* tests/du/bigtime: New file, which checks for the bug.
|
|
* tests/misc/md5sum: Test for new diagnostics.
|
|
And remove the now-superfluous totals from the other two warnings,
so the plurals will also work in other languages than English.
* src/md5sum.c (digest_check): Change as above.
* tests/misc/md5sum (check-quiet2): Adjust accordingly.
|
|
* tests/misc/sort-float: On systems with DBL_MIN < LDBL_MIN,
this test would fail because the expected output was not sorted.
Detect that case, and if needed, reverse those two values.
|
|
* tests/misc/ls-misc (push_ls_colors): Don't assume LS_COLORS
is set. This part of the fix is by Jim Meyering.
(sl-dangle2, sl-dangle3, sl-dangle4, sl-dangle5): Don't assume
that newly-created files will have time stamps in the past. They
might not, due to clock skew, if the file systems are remote.
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/21322/focus=21346
|
|
* src/tail.c (tail_forever_inotify): Handle the case where
tail --follow=name with inotify, is not able to add a watch on
a specified directory. This may happen due to inotify resource
limits or if the directory is currently missing or inaccessible.
In all these cases, revert to polling which will try to reopen
the file later. Note inotify returns ENOSPC when it runs out
of resources, and instead we report a particular error message,
lest users think one of their file systems is full.
(main): Document another caveat with using inotify, where we
currently don't recheck directories recreated after the
initial watch is setup.
* tests/tail-2/F-vs-rename: Fix the endless loop triggered by
the above issue.
* tests/tail-2/inotify-hash-abuse: Likewise.
* tests/tail-2/wait: Don't fail in the resource exhaustion case.
* tests/tail-2/F-vs-missing: A new test for this failure mode
which was until now just triggered on older buggy linux kernels
which returned ENOSPC constantly from inotify_add_watch().
* NEWS: Mention the fix.
|
|
The bug was introduced with commit 23f6d41f, 19-02-2003.
* src/split.c (bytes_split, lines_split, line_bytes_split):
Correctly check the return from full_read().
* tests/misc/split-fail: Ensure split fails when
it can't read its input.
* NEWS: Mention the fix.
|
|
* tests/misc/stat-birthtime: This recently added test
fits the pattern of requiring a delay to pass, so get
it to use retry_delay_()
|
|
This touches all new tests added since commit b062bbd9, when
init.cfg was added. Older tests still exist that could use
conversion, but we can address those later.
* tests/sample-test: Restore hint for --version output.
* tests/misc/stat-birthtime: Include --version if verbose.
* tests/misc/tr-case-class: Likewise.
* tests/misc/stat-mount: Likewise.
* tests/misc/sort-unique: Likewise.
* tests/misc/sort-benchmark-random: Likewise.
Suggested by Jim Meyering.
|
|
* src/stat.c (epoch_time): New function.
(print_stat): Use it for %[WXYZ].
* NEWS: Document this.
* tests/touch/60-seconds: Adjust test to match.
* tests/misc/stat-birthtime: Likewise.
|
|
* src/stat.c (print_stat): New %w and %W formats.
(do_stat): Include %w in default format.
(usage): Document new specifiers.
* doc/coreutils.texi (stat invocation): Likewise.
* NEWS: Likewise.
|
|
* tests/sample-test: Recommend modern idiom.
|
|
This valid translation spec aborted:
LC_ALL=en_US.iso-8859-1 tr '[:upper:]- ' '[:lower:]_'
This invalid translation spec aborted:
LC_ALL=en_US.iso-8859-1 tr '[:upper:] ' '[:lower:]'
This was caused by commit 6efd1046, 05-01-2008,
"Avoid tr case-conversion failure in some locales"
This misaligned conversion spec was allowed:
LC_ALL=C tr 'A-Y[:lower:]' 'a-z[:upper:]'
This was caused by commit af5d0c36, 21-10-2007,
"tr: do not reject an unmatched [:lower:] or [:upper:] in SET1"
This misaligned spec was allowed by extending the class:
LC_ALL=C tr '[:upper:] ' '[:lower:]'
* src/tr.c (validate_case_classes): A new function to check
alignment of case conversion classes. Also it adjusts the
length of the sets so that locales with different numbers of
upper and lower case characters, don't cause issues.
(string2_extend): Disallow extending the case conversion
class as in the above example. That is locale dependent
and most likely not what the user wants.
(validate): Do the simple test for "restricted" char classes
earlier, so we don't redundantly do more expensive validation.
(main): Remove the case class validation, and simplify.
* tests/misc/tr-case-class: A new test to test the various
alignment and locale issues, associated with case conversion.
* tests/misc/tr: Move case conversion tests to new tr-case-class.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fixes.
|
|
* tests/misc/sort-debug-keys: Don't depend on
printf supporting \xhh format, which isn't supported
by dash for example. Also change from double quoted
strings to single quoted, when we don't need any
variable interpolation.
|
|
* tests/misc/stat-mount: Don't try to correlate the
mount points output by df and stat, as they're similar,
but sometimes different in the presence of bind mounts.
* doc/coretuils.texi (stat invocation): Clarify the
bind mount difference between stat and df.
|
|
* tests/init.sh: Update from gnulib.
|
|
* gnulib: Update to latest.
* src/copy.c (copy_reg): Use fdutimens instead of gl_futimens.
* src/touch.c (touch): Adjust parameter order.
* tests/init.sh: Resync from upstream.
|
|
* tests/misc/env: Check that the shell can support
the operation, before filtering through `env`.
Note dash 0.5.5 is unaffected by this issue.
|
|
* tests/init.cfg (retry_delay_): Describe
the backoff method used.
* tests/ls/readdir-mountpoint-inode: Add a timeout
to the stat call to eliminate the chance of hangups.
* tests/mv/i-3: Change the timeout required to pass
from 1 second to a range of .1s - 3.1s.
* tests/rm/dangling-symlink: Likewise.
|
|
All tests currently pass on NFS on Linux kernel 2.6.22 at least,
but some fail on 2.6.9, so we exclude those here.
* tests/init.cfg (is_local_dir_): A new function
returning if the specified directory is on a local file system.
(require_local_dir_): A new function to skip tests
if the current directory is not on a local file system.
* tests/cp/existing-perm-race: Skip if non local.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/du/basic: Use refactored function.
* tests/install/basic-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
* tests/du/slink: Likewise. Remove redundant test
for NFS file system.
* tests/misc/join: s/local/locale/.
|
|
* src/tac.c (main): Reading a line longer than 16KiB would cause
tac to realloc its primary buffer. Then, just before exit, tac
would mistakenly free the original (now free'd) buffer.
This bug was introduced by commit be6c13e7, "maint: always free a
buffer, to avoid even semblance of a leak".
* NEWS (Bug fixes): Mention it.
* tests/misc/tac (double-free): New test, to exercise this.
Reported by Salvo Tomaselli in <http://bugs.debian.org/594666>.
|
|
* src/find-mount-point.c: A new file refactoring
find_mount_point() out from df.c
* src/find-mount-point.h: Likewise.
* src/df.c: Use the new find-mount-point module.
* src/stat.c (print_stat): Handle the new %m format.
(find_bind_mount): A new function to
return the bind mount for a file if any.
(out_mount_mount): Print the bind mount for a file, or else
the standard mount point given by the find-mount-point module.
(usage): Document the %m format directive.
* src/Makefile.am: Reference the refactored find-mount-point.c
* po/POTFILES.in: Add find_mount_point.c to the translation list
* doc/coreutils.texi (stat invocation): Document %m,
and how it may differ from the mount point that df outputs.
* test/misc/stat-mount: A new test to correlate mount points
output from df and stat.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the new feature
* THANKS: Add the author
Signed-off-by: Pádraig Brady <P@draigBrady.com>
|
|
|
|
* tests/ls/readdir-mountpoint-inode: Check to see if skip_test_ is
called in a helper function via $() instead of mistakenly failing.
* THANKS: Update.
|
|
* NEWS: Document this.
* src/sort.c (getmonth): Omit LEN arg, as MONTH is now null-terminated.
(compare_random): Don't null-terminate keys, as caller now does that.
(compare_version): Remove.
(debug_key): Null-terminate string for getmonth.
(keycompare): Support combining -R with any of -d, -f, -i, -V.
Also, support combining -V with any of -d, -i.
(check_ordering_compatibility): Allow newly-supported combinations.
* tests/misc/sort (02q, 02r, 02s): New tests, for new combinations.
(incompat2): Now test -nR, since -fR are now compatible.
|
|
Formerly, the 'compare' function and some of its subroutines had a
debugging flag, which caused them to output underlines. This
change refactors the code so that debugging output is
more-separated from the actual sorting. In the process, the
change fixes a minor error in the debugging output. The change
shortens the source code and executable size a tad, and improves
CPU performance by 2.4% on my platform with a simple benchmark (C
locale, line sorting, no debug).
* src/sort.c (long_double, strtold): Move back to prelude, since
they're now used by multiple functions again.
(unit_order): Move to file scope, since it's now used by two functions.
(find_unit_order, human_numcompare, numcompare, general_numcompare):
Remove endptr parameter. All callers changed.
(human_numcompare): Args are now const pointers.
(getmonth): Endptr is now non-const.
(key_numeric): Move up, since it's needed earlier.
(debug_key): Take a line and a key as argument, instead of having
the caller figure out where the field is.
(debug_line): New function.
(keycompare, compare): Omit debug parameter; debug output now done
elsewhere. All callers changed.
(write_line): Renamed from write_bytes; all callers changed.
Use debug_line (not 'compare') to output debug info.
Use a slightly faster check for whether output file is stdout.
(check): Don't do debugging output; it's not that useful here,
and it confuses the code.
(main): Check for incompatibility between -c and --debug.
Use standard diagnostic for incompatible options.
* tests/misc/sort-debug-keys: Fix test case: "--Mi-1" is not
a number, so its first character should not be underlined when
debugging a numeric sort.
|