summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2007-08-02Adjust the other two "no-x" tests and unify all three.Jim Meyering
* tests/du/no-x: Factor out du-specific bits. * tests/chmod/no-x: Use the same code. * tests/chgrp/no-x: Use the same code.
2007-08-02Adapt du's no-x test not to fail on older Linux systems.Jim Meyering
* tests/du/no-x: Accept a third variant of the diagnostic.
2007-07-31du: print size (probably incomplete) of each inaccessible directoryJim Meyering
* src/du.c (process_file): Print what we know of the size of a directory even when it is inaccessible. What we print is just the size of the directory itself, not counting any of its contents. * tests/du/inacc-dir: Test for this. * NEWS: Mention this change. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-07-31Add a test for du not counting size of inaccessible directories.Jim Meyering
* tests/du/inacc-dir: New file. Test for fts.c bug fixed yesterday. * tests/du/Makefile.am (TESTS): Add inacc-dir. * NEWS: Mention the bug fix. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-07-29Attempt to copy a regular file, even if stat says it is empty.Jim Meyering
* NEWS: Document this bug fix. * src/copy.c (copy_reg): Read from a regular file, even if it appears (stat.st_size == 0) to be empty. This reverts an optimization introduced on 2005-11-23 for coreutils-6.0. Otherwise, "cp /proc/cpuinfo /tmp" creates an empty file, on e.g., linux-2.6.20. * tests/cp/proc-zero-len: New file. Test for the above. * tests/cp/Makefile.am (TESTS): Add proc-zero-len. Reported by Dan Berrangé.
2007-07-26sort: Improve sort --random-sort test.Bob Proulx
Jim Meyering wrote: > so if your test were to run sort -R twice, and compare *those* outputs, > then it would trigger on this bug. Thanks. I don't have a system with the failure so I was working blind. Here is a rework of the patch. Bob >From 76dafb0dde4f8d685eb2b4b43fbf3c1cf9f0ff4b Mon Sep 17 00:00:00 2001 From: Bob Proulx <bob@proulx.com> Date: Thu, 26 Jul 2007 02:19:49 -0600 Subject: [PATCH] sort: Improve sort --random-sort test. * tests/misc/sort-rand: If "locale" is available pick a random non-C locale and check "sort --random-sort" behavior using it. Signed-off-by: Bob Proulx <bob@proulx.com>
2007-07-24sort: add a test to exercise the affected code.Jim Meyering
* tests/sort/Test.pm (realloc-buf): Exercise the code that changed yesterday. No other test in all of "make check" does this. * NEWS: Mention the fix.
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
2007-07-20Document and add a test for today's sort bug fix.Jim Meyering
* NEWS: Describe the bug fix. * tests/sort/Test.pm (obs-inval): Add a test for today's fix.
2007-07-19Fix a portability bug in the new ls-color test.Jim Meyering
* tests/ls/stat-free-symlinks: Don't rely on the ability of a built-in printf to interpolate '\e'. Use '\033' instead.
2007-07-19"cp -i --update older newer" no longer prompts; same for mvJim Meyering
* src/copy.c (copy_internal): Perform "update" check before the possible interactive prompt. Reported by zeno_AT_biyg_DOT_org in <http://bugzilla.redhat.com/248591> * tests/mv/update: Add tests for the above. * NEWS: Mention the bug fix.
2007-07-15ls --color: Don't stat symlinks when neither ORPHAN nor MISSING attribute ↵Jim Meyering
has a color. * src/ls.c (main): Don't set check_symlink_color when C_EXEC is colored, unless ln=target (aka color_symlink_as_referent) is set. (gobble_file): Set f->linkok = true also when !check_symlink_color. http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/10608/focus=10927 Reported by Jeremy Maitin-Shepard. * tests/strace: New file, contents extracted from... * tests/mv/atomic: ...here. Source strace. * tests/ls/stat-free-symlinks: New file. Test for the above. Use strace to ensure that in this corner case, ls does not call stat. * tests/ls/Makefile.am (TESTS): Add stat-free-symlinks. * tests/Makefile.am (EXTRA_DIST): Add strace.
2007-07-11If there's a GPL vN copyright comment, require that N == 3.Jim Meyering
* Makefile.maint (sc_GPL_version): New rule. * tests/misc/arch: Fix the sole violation.
2007-07-10Skip "arch" test if it's not built.Jim Meyering
* tests/misc/Makefile.am (built_programs): Define. (TESTS_ENVIRONMENT): Add $(built_programs), for... * tests/misc/arch: ...this: skip the test if arch is not built. * src/Makefile.am (built_programs.list): New rule. * tests/Makefile.am (built_programs): Rename from all_programs. (TESTS_ENVIRONMENT): Use built_programs, not all_programs. * tests/help-version: Likewise. * NEWS: Mention that using --enable-no-install-program=X may cause "make check" to fail. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-07-10New program: archKarel Zak
* NEWS: Mention arch. * README: Add arch to the list of programs. * AUTHORS: Add arch. * src/uname.c: Include "uname.h". (PROGRAM_NAME): Handle arch, too. (ARCH_AUTHORS): Define. (uname_long_options, arch_long_options): Renamed and new globals. (usage): Handle arch-mode as well as uname-mode. (decode_switches): New function, extracted from main, to handle arch-mode as well as uname-mode. (main): Handle both modes. * src/uname-arch.c: New program, alias for "uname -m". * src/uname-uname.c: New file, default uname mode. * src/uname.h: New file, uname modes. * src/Makefile.am (EXTRA_PROGRAMS): Add arch. (uname_SOURCES, arch_SOURCES): Define. * man/arch.x: New file. * man/Makefile.am (dist_man_MANS): Add arch.1. (arch.1): New dependency. * tests/misc/arch: New test, compare "arch" with "uname -m" * configure.ac (OPTIONAL_BIN_PROGS): Add arch. (MAN): Add arch.1. * .x-sc_require_config_h: Exempt uname-arch.c and uname-uname.c from the always-include-<config.h> rule. Signed-off-by: Karel Zak <kzak@redhat.com> Signed-off-by: Jim Meyering <jim@meyering.net>
2007-07-10Change "version 2" to "version 3" in all copyright notices.Jim Meyering
2007-07-09Fix the automatic number width formatting in seq.P@draigBrady.com
* src/seq.c: Fix the -w logic. Ignore spaces and '+' characters of input numbers when determining width. Set format correctly for input numbers in scientific notation. * tests/seq/basic: Add various number width tests. Details: <http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/10903> Signed-off-by: Pádraig Brady <Pádraig Brady P@draigBrady.com>
2007-07-04pr -F no longer suppresses the footer or the first two blank header linesPaul Eggert
Here's a patch along the lines of <http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/10849/focus=10857>. It's a bit large since it changes the test cases to match the behavior, and the test cases' file names depend on the behavior! * NEWS: pr -F no longer suppresses the footer or the first two blank lines in the header. * doc/coreutils.texi (pr invocation): Likewise. Also, a too-short page length implies -t, not -T. * src/pr.c (lines_per_header, lines_per_footer): Now constants. (init_parameters): Don't try to change them. (print_header): Use the same header and footer format regardless of wither form feeds are being used. (usage): Adjust to above change when describing too-short page length. Too-short page length impliesy -t, not -T. * tests/pr/2-S_f-t_notab: Adjust to the fact that -F now affects only formfeed handling; it does not change the header. * tests/pr/2-Sf-t_notab: Likewise. ... * tests/pr/3-5l17f-t: Remove, since it's been renamed to another file whose name has a line count 7 larger, reflecting the new line count needed for this behavior. * tests/pr/3a3l8f-t: Likewise. ... * tests/pr/w72l24f-ll: Likewise. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-06-22Add test cases for seq off-by-one problem.Pádraig Brady
2007-06-18A few more symlink-related fixes. Fix a bug triggered by cpPaul Eggert
--parents and symlinks. Close some race conditions possible when the destination replaces a newly-created file with a symlink. * NEWS: Document that 'cp --parents' no longer mishandles symlinks in file name components of source. * src/copy.c (HAVE_LCHOWN): Default to false. (lchown) [!defined HAVE_LCHOWN]: Define to chown, for convenience. * src/cp.c (lchown) [!HAVE_LCHOWN]: Likewise. * src/install.c (lchown [!HAVE_LCHOWN]: Likewise. * src/copy.c (set_owner): Use lchown instead of chown, for safety in case the file got replaced by a symlink in the meantime. * src/cp.c (re_protect): Likewise. * src/install.c (change_attributes): Likewise. * src/copy.c (copy_internal): Use ordinary C rather than an #if. * src/cp.c (lchown) [!HAVE_LCHOWN]: Define to chown, for convenience. (struct dir_attr): Cache the entire struct stat of the directory, rather than just its mode, so that we needn't stat the directory twice (which can lead to races). (re_protect): Don't use XSTAT as that's not appropriate in this context (symlinks should be followed here). Instead, use the cached stat value. (make_dir_parents_private): Save dir's entire struct stat, not just its mode. * tests/cp/cp-parents: Add test to check against bug with cp --parents and symlinks.
2007-06-15Correct cp's handling of destination symlinks in some cases.Paul Eggert
* NEWS: "cp" no longer considers a destination symlink to be the same as the referenced file when copying links or making backups. * src/copy.c (copy_reg): When following a symlink, use the followed name in later chown etc. requests, so that the created file is affected, rather than the symlink. Use O_NOFOLLOW on source when not dereferencing symlinks; this avoids a race. Preserve errno correctly when doing multiple open attempts on the destination. (copy_internal): Follow destination symlinks only when copying a regular file and only when we don't intend to remove or rename the destination first, regardless of whether following source symlinks; this is because since POSIX and tradition (e.g., FreeBSD) say we should ordinarily follow destination symlinks if the system calls would ordinarily do so. * src/copy.h (struct cp_options): Add comment that 'dereference' is only for source files. * src/cp.c (usage): Note that --derereference etc. are only for source files. (make_dir_parents_private): Follow symlinks, regardless of whether --dereference is specified, because these are destination symlinks. * tests/cp/same-file: Adjust tests to match revised behavior. Filter out perror output since it might vary from host to host. Use sed alone instead of also using echo. * doc/coreutils.texi (cp invocation): Document the behavior better when the destination is a symlink. Clarify source versus destination symlinks. Describe the new behavior for destination symlinks. 2007-06-15 Jim Meyering <jim@meyering.net> * src/copy.c: Include "canonicalize.h". (copy_reg): Use canonicalize_filename_mode to follow the symlink, so that we can always open with O_EXCL and avoid a race.
2007-06-10bug-fix: cp would fail to write through a dangling symlinkJim Meyering
* NEWS: Mention the bug fix. * src/copy.c (copy_reg): When open fails with EEXIST, the destination is lstat'able, and a symlink, call open again, but now without O_EXCL. * tests/cp/thru-dangling: New file, to test for the above fix. * tests/cp/Makefile.am (TESTS): Add thru-dangling. * THANKS: Add Michael McLagan. Bug report from Michael McLagan in <http://bugzilla.redhat.com/243588>.
2007-05-22cut: diagnose a range starting with 0 (-f 0-2) as invalid, andJim Meyering
give a better diagnostic for a field-number/offset of 0. * NEWS: Mention the fix. * src/cut.c (ADD_RANGE_PAIR): Add an explicit check for 0. Based on a patch from James Youngman. * tests/misc/cut: Add tests for the above.
2007-05-22"cut -f 2-0" now fails; before, it was equivalent to "cut -f 2-"Jim Meyering
Also, diagnose the '-' in "cut -f -" as an invalid range, rather than interpreting it as the unlimited range, "1-". * NEWS: Mention these changes. * src/cut.c (set_fields): Don't interpret an accumulator "value" of 0 as an unspecified range endpoint. Give better diagnostics. Adjust a comment so that it is true also for 64-bit size_t. * tests/cut/Test.pm: Add tests for the above.
2007-05-22stty: diagnose an invalid hex value in 35-colon commmand-line argumentJim Meyering
* NEWS: Mention this. * src/stty.c (strtoul_tcflag_t, strtoul_cc_t): New functions. (recover_mode): Use those functions (not sscanf), to parse the string robustly. * tests/stty/invalid: New file. Test for the above. * tests/stty/Makefile.am (TESTS): Add invalid. * .x-sc_prohibit_atoi_atof: Don't exempt stty.c from this check. Add tests/stty/invalid so we don't have to obfuscate the comment about sscanf therein. * Makefile.maint (sc_prohibit_atoi_atof): Mention sscanf in the diagnostic, too.
2007-05-13Remove the generated tests/*/Makefile.am files from version control.Jim Meyering
* tests/cut/Makefile.am: git-remove this generated file. * tests/head/Makefile.am: Likewise. * tests/join/Makefile.am: Likewise. * tests/pr/Makefile.am: Likewise. * tests/sort/Makefile.am: Likewise. * tests/tac/Makefile.am: Likewise. * tests/tail/Makefile.am: Likewise. * tests/test/Makefile.am: Likewise. * tests/tr/Makefile.am: Likewise. * tests/uniq/Makefile.am: Likewise. * tests/wc/Makefile.am: Likewise. * .cvsignore, .gitignore: Ignore these generated files. * src/.cvsignore, src/.gitignore: Add chcon here, ... * .cvsignore, .gitignore: ... not here.
2007-05-13Test uniq's new --zero-terminated (-z) option.Jim Meyering
* tests/uniq/Test.pm: When possible, create a "-z"-testing variant of each existing test. (2z, 3z, 4z, 5z, 20z, 122, 123): New tests from James Youngman.
2007-05-04Avoid test failure when run with an unusual umask.Jim Meyering
* tests/ls/color-dtype-dir: Set umask to 022. Suggestion from AIDA Shinra.
2007-05-04Avoid failure of root-only test when run with a restrictive umask.Jim Meyering
* tests/rm/no-give-up: Ensure that non-root can access "d/" through root-owned ".". Reported by AIDA Shinra.
2007-05-04tr -c: don't abort when translating with S2 larger than complement of S1Jim Meyering
* src/tr.c (main): Remove invalid assertion triggered by e.g., tr -c a '[b*256]'. There's nothing wrong with having Set2 larger than Set1. Reported by Guntram Blohm. * tests/tr/Test.pm (no-abort-1): Test for the above. * NEWS: Mention this bug fix. * THANKS: Add Guntram Blohm.
2007-05-03Avoid test failure when run with a permissive umask.Jim Meyering
* tests/rm/no-give-up: Set permissions of test directory properly, i.e., not depending on umask prohibiting go=w. Reported by AIDA Shinra.
2007-05-02Invoke rm via 'setuidgid ... env PATH="$PATH" ...', as in fail-eperm.Jim Meyering
* tests/rm/fail-2eperm: Patch from AIDA Shinra. Reported by Peter Dyballa. * THANKS: Add AIDA Shinra and Peter Dyballa.
2007-04-24* THANKS: Add Andreas Frische.Jim Meyering
* NEWS: Mention today's ls --color fix. * tests/ls-2/tests (sl-dangle): Add a test for today's fix.
2007-04-12split --line-bytes=N (-C N): don't create an empty file.Paul Eggert
* src/split.c (line_bytes_split): Don't create an empty line afterwards if the last buffer happens to be exactly full. * tests/misc/split-fail: Add a test case for this. * NEWS: mention this.
2007-04-07Add a test for, and document, today's fix.Jim Meyering
* NEWS: Mention today's ls --color fix. * tests/ls-2/tests (sl-target): Add a test for today's fix. * THANKS: Add Kirk Kelsey.
2007-04-02* src/ls.c (print_horizontal): Fix bug reported by Mike Frysinger:Paul Eggert
ls -x DIR would sometimes output the wrong string in place of the first entry. * NEWS: Mention the bug fix. * tests/ls/x-option: New file. * tests/ls/Makefile.am (TESTS): Add x-option.
2007-03-29* src/runcon.c (main): Don't reorder arguments. Reported byJim Meyering
Ulrich Drepper in <http://bugzilla.redhat.com/232652>. * tests/misc/runcon-no-reorder: New file. Test for the above. * tests/misc/Makefile.am (TESTS): Add runcon-no-reorder.
2007-03-29Arrange for "make check-root" to run the new root-only test.Jim Meyering
* tests/Makefile.am (t9): New target, to run tests/cp/cp-a-selinux. (all_t): Add t9. Use a directory on a loopback device mounted with -o context=... * tests/cp/cp-a-selinux: Since this test now runs mount and umount, it is a root-only one.
2007-03-29* src/runcon.c: New program.Jim Meyering
* src/Makefile.am (bin_PROGRAMS): Add runcon. (runcon_LDADD): Define. * README: Add runcon to the list of programs. * AUTHORS: Add this: runcon: Russell Coker * tests/help-version: Add runcon as an exception. * man/Makefile.am (dist_man_MANS): Add runcon.1. (runcon.1): New dependency. * po/POTFILES.in: Add src/runcon.c.
2007-03-29* tests/cp/cp-a-selinux: New file. Test for the bug reported inJim Meyering
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux. * tests/selinux: New file. * tests/Makefile.am (EXTRA_DIST): Add selinux. * tests/misc/selinux: Source the new script, rather than open coding it. Change how "cp -a" and "cp --preserve=context" work with SELinux. Now, cp -a attempts to preserve context, but failure to do so does not change cp's exit status. However "cp --preserve=context" is similar, but failure *does* cause cp to exit with nonzero status. * src/copy.h (struct cp_options) [require_preserve_context]: New member. * src/copy.c (copy_reg, copy_internal): Implement the above. * src/mv.c (cp_option_init): Initialize the new member. * src/install.c (cp_option_init): Likewise. * src/cp.c (cp_option_init): Likewise. (decode_preserve_arg): Set it or reset it. FIXME: add an on-writable-NFS-only test
2007-03-29* tests/misc/selinux [VERBOSE]: Print version info for eachJim Meyering
of the tested tools, not just ls.
2007-03-29ls: Add support for SELinux and a slightly modified -Z option.Jim Meyering
I started with the patches from Red Hat. The entries below tell how the code evolved. * src/ls.c (print_long_format, print_file_name_and_frills): When there is no security context (due to getfilecon/lgetfilecon failing with e.g. ENOTSUP), print it as "?", not "". * src/ls.c (print_file_name_and_frills): Make -Z work without -l. (length_of_file_name_and_frills): Likewise. * src/ls.c: Remove the --lcontext and --scontext options. Change the way -Z, --context work so that it no longer implies -l. Thus, -Z -l will work like -lcontext and -Z without -l will work like --scontext. Adjust tests to reflect new 'ls -l' syntax -- affects only systems with SELinux when operating on a file with no ACL. These tests assumed that everything before the first space on each line is the 10-byte mode string. But there may also be a "+" in the 11th column, just before the space. However, note that this is not new. The same thing would have happened even without the change below, when listing a file with an ACL. * tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm: * tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod: * tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm: Don't make compilation depend on USE_ACL. An SELinux security context counts as an "alternate access control method", so ls must output a "+" for each file with a security context. * src/ls.c [struct fileinfo] (have_acl): Declare unconditionally. (FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly. (gobble_file): Record whether a file has a security context, and update the condition used to determine whether to print the "+". (gobble_file): Call getfilecon/lgetfilecon also when format == long_format, so that we get the "+". * src/ls.c (gobble_file): Add a comment explaining why (with a security context option) ls doesn't exit nonzero due to e.g., getfilecon failing with errno == ENOTSUP. * src/ls.c (gobble_file): Ignore failure of getfilecon if it's due to ENOTSUP. * src/ls.c (gobble_file): Factor out three small blocks using getfilecon and lgetfilecon. Don't ignore return value from getfilecon and lgetfilecon. * src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C ternary operator). (print_scontext_format): Likewise. (print_scontext): Declare to be "bool", not int. Adjust uses. * src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX). * tests/misc/chcon: New file. * tests/misc/chcon-fail: New file. * tests/Makefile.am (check-root): Run new, root-only misc/chcon test. * tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail. * tests/misc/Makefile.am (TESTS): Add selinux. * tests/misc/selinux: New file. * tests/help-version: Skip chcon.
2007-03-24If strace malfunctions, skip the test rather than failing it.Jim Meyering
* tests/mv/atomic: Required on a mips-unknown-linux-gnu system running the aging linux-2.4.27-mipscvs-20040814.
2007-03-22* tests/mv/hard-3: Correct the preceding change: $3 -> $2.Jim Meyering
2007-03-22Improve a test script.Paul Eggert
* tests/mv/hard-3: Check for 'ls' failure, too. Generate more-useful debugging output when 'ls' fails.
2007-03-21Fix a test script not to claim an ext2 file system is of type xfs.Jim Meyering
* tests/du/slink: When using df --local and df --type=TYPE, test only the exit code. Don't bother with stdout. Prompted by a report by Thomas Schwinge of an inaccurate diagnostic.
2007-03-20Skip part of this test when "." is not a local file system.Jim Meyering
* tests/mkdir/p-3: Likewise.
2007-03-20Skip part of this test when "." is not a local file system.Jim Meyering
* tests/install/basic-1: Otherwise, it would fail on some NFS file systems.
2007-03-18Fix a generic NFS-related test failure.Jim Meyering
* tests/mkdir/p-3: When setting up an unreadable "." in an inaccessible parent, make the parent inaccessible *after* making "." unreadable. Otherwise, running "chmod a-r ." in an already- inaccessible parent would fail on NFS with "Stale NFS file handle". Signed-off-by: Jim Meyering <jim@meyering.net>
2007-03-18Fix a bug in how pr -m -s works.Jim Meyering
* NEWS: Describe how the fix affects pr. * src/pr.c (init_parameters): The --merge (-m) option does not imply --expand-tabs (-e), so don't set "untabify_input". Reported by Wis Macomson. * tests/misc/pr: New file. Test for the above fix. * tests/misc/Makefile.am (TESTS): Add pr. * THANKS: Update.
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-28 12:36:23 +0000