Age | Commit message (Collapse) | Author |
|
* src/split.c (main): Exit with a diagnostic if --filter
is specified along with a specific chunk number.
* test/split/filter: Ensure this combination fails.
|
|
* src/split.c (bytes_split): Stop reading when we
can no longer write to a child process.
(lines_rr): Likewise.
(lines_bytes_split): No change is made here since
input is bounded by the original file size.
* test/split/filter: Add test cases.
|
|
src/split.c (main): Don't unblock SIGPIPE before cleanup,
as then any pending signals will be sent and cause
the main split process to exit with a non zero status (141).
* test/split/filter: Add a test for this case.
|
|
* src/split.c (lines_bytes_chunk): Handle the edge case
where the file is truncated as we read.
* tests/misc/split-lchunk: Cleanup; no functional change.
|
|
* src/chmod.c (describe_change): Pass in the original mode,
and output this in the messages.
* tests/chmod/c-option: Adjust as per the new message.
* THANKS.in: Remove the now auto-generated name.
* NEWS: Mention the change in behavior.
Signed-off-by: Pádraig Brady <P@draigBrady.com>
|
|
* tests/ls/stat-free-color: Also check for stat64 and lstat64 syscalls.
This fixes a test failure reported by Stefano Lattarini.
|
|
* src/split.c (lines_chunk_split): Ensure that data is only
written to stdout when k specified. Also ensure that
extra files are not created when there is more data available
than reported in the file size.
* tests/misc/split-lchunk: Verify that split -n l/k/n doesn't
generate any files, and that -n l/n always generates n files.
* NEWS: Mention the fix.
|
|
* tests/misc/tac-continue: Fix typo in usually-skipped test:
s/mkfifo_or_skip/mkfifo_or_skip_/ (i.e., append "_").
This test is usually skipped, because I'm probably the only
one to set the FULL_PARTITION_TMPDIR envvar, and recently the
one I'd been using ceased to exist, so this test was skipped
even for me. Good argument for making this a root-only test
and creating a full partition just for this test case.
|
|
* src/printf.c (STRTOX): Don't access memory after a
string containing a single quote character.
* tests/misc/printf: Add tests for various combinations
of single quote characters combined with a numeric format.
* THANKS.in: Add bug reporter.
* NEWS: Mention the fix.
Reported-by: Paul Marinescu <paul.marinescu@imperial.ac.uk>
|
|
* tests/cp/existing-perm-race: s/mkfifo/mkfifo_or_skip_/
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/special-f: Likewise.
* tests/dd/reblock: Likewise.
* tests/ls/file-type: Likewise.
* tests/misc/cat-buf: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/printf-surprise: Likewise.
* tests/misc/selinux: Likewise.
* tests/misc/sort-spinlock-abuse: Likewise.
* tests/misc/stdbuf: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/init.cfg: Improve the error message when skipping.
|
|
* gl/lib/randperm.c (randperm_new): When the number of items
to return H, is much smaller than the total number of items N,
use a hash to represent the sparse permutations of the set N.
This is currently enabled for N > 128K and N/H > 32.
* tests/misc/shuf: Ensure shuf can quickly return 2 numbers
from a large range.
* gl/modules/randperm: Depend on hash.
* NEWS: Mention the change.
|
|
* tests/du/bigtime (future_time): Split long line.
|
|
* cfg.mk (sc_prohibit_skip_): New rule.
* tests/init.cfg (skip_test_): Add a comment.
|
|
skip_test_ emits its diagnostic both to FD 9 (tty), and to
FD 2 (usually the log file), whereas init.sh's skip_ emits
only to FD 9. Without that, the log is slightly less useful.
* tests/cp/fiemap-2: Use skip_test_, not skip_.
* tests/cp/fiemap-perf: Likewise.
* tests/du/bigtime: Likewise.
* tests/du/files0-from-dir: Likewise.
* tests/du/move-dir-while-traversing: Likewise.
* tests/init.sh: Likewise.
* tests/misc/sort-stale-thread-mem: Likewise.
* tests/misc/stat-nanoseconds: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/split/filter: Likewise.
Prompted by a report from Pádraig Brady.
|
|
Even on a system with d_type support, the default use of --color
makes ls stat every file in order to be able to honor settings like
EXEC, STICKY, ORPHAN, SETUID, etc., because those settings require
information that is not provided by dirent.d_type. However, if
for a potentially large performance gain, you are willing to disable
those settings, you can now make ls --color give type-related coloring
and perform no stat calls at all (other than the unavoidable call-per-
command-line argument). Before this change, even with all of those
attributes disabled, ls --color would still stat every directory.
Now, we're down to the minimum of one stat call per command-line arg.
* src/ls.c (gobble_file): With --color, don't stat a
non-command-line-specified directory when no directory-coloring
attribute is enabled.
* tests/init.cfg (require_dirent_d_type_): New function.
* tests/d_type-check: New script, mostly from Pádraig Brady.
* tests/Makefile.am (EXTRA_DIST): Add it.
* tests/ls/stat-free-color: New test.
* tests/Makefile.am (TESTS): Add it.
* doc/coreutils.texi (General output formatting): Describe how
to use dircolors to make ls --color refrain from calling stat
on a d_type-enabled file system.
Prompted by a query from Josef Bacik.
|
|
* tests/split/filter: Skip if xz is not installed.
|
|
* tests/Makefile.am (TESTS): Add split/filter.
* tests/split/filter: New file.
|
|
* src/sort.c (key_warn): `sort -k2,1n --debug` would output
warnings about being both "zero width" and "spanning multiple fields".
Suppress the latter one.
* tests/misc/sort-debug-warn: Add a couple of test cases.
|
|
Without this, most perl-based tests would fail in "make distcheck".
* tests/Makefile.am (EXTRA_DIST): Add CuSkip.pm
|
|
* tests/Makefile.am (TESTS): Remove misc/pwd-unreadable-parent.
This test was misleading and useless (was always skipped).
Inspired by a report from Bruno Haible: http://debbugs.gnu.org/8570
* tests/misc/pwd-unreadable-parent: Remove file.
|
|
* tests/CuSkip.pm (skip): New file/module/function, to help
the perl test scripts "skip" a test consistently, emitting
a diagnostic both into the log file and into the outermost
stderr stream that is more likely to be seen by a human.
* tests/check.mk (TESTS_ENVIRONMENT): Add -MCuSkip.
* tests/misc/date-next-dow: Use CuSkip::skip in place of warn+exit-77.
* tests/misc/tty-eof: Likewise.
* tests/misc/uniq: Likewise.
* tests/rm/fail-eperm: Likewise.
* tests/misc/md5sum-newline: Likewise. Also, s/program_name/ME/.
* tests/misc/ls-misc (setuid_setup, main): Likewise.
* tests/misc/pwd-long: Likewise, and add -I"$abs_srcdir" -MCuSkip
to the $PERL invocation command.
Inspired by a request from Bruno Haible regarding misc/tty-eof:
http://debbugs.gnu.org/8570
|
|
* src/tail.c (tail_forever_inotify): Just as without inotify,
tail --follow=name now terminates when the last tailed-by-name file
is unlinked or moved aside. This bug was introduced on 2009-06-15
via commit ae494d4b, "tail: use inotify if it is available".
Reported by Tim Underwood in
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/22286
* NEWS (Bug fixes): Mention this.
* tests/tail-2/follow-name: Test for this.
* tests/Makefile.am (TESTS): Add it.
|
|
Otherwise, this would fail (albeit rarely) on a "make -j24 check" run.
* tests/tail-2/pipe-f2: Increase timeout from 1 second to 10,
to avoid false positive failure.
|
|
* tests/cp/sparse-fiemap: Parenthesize ternary expression used
as an argument to awk's printf. Otherwise, gawk 3.0.1 and the
one from debian stable's original-awk would get a syntax error.
Reported by Dennis Clarke.
Copyright note: tiny change
|
|
* tests/cp/sparse-fiemap: When this test was run as root on an ext3
file system, (ext3 had known problems), it would trickily create and
mount a loopback ext4 file system and use that instead. However, due
to a bug in 2.6.39-rc1..rc3, this loopback test (when run in another
loopback FS) exposed a bug with 1k-blocksize ext4 whereby non-NUL
data would be read from a hole. For details, see this:
http://thread.gmane.org/gmane.comp.file-systems.ext4/24495
|
|
* tests/cp/sparse-fiemap: Fail right away with details, when cmp fails.
When extent maps are found to differ, display them and merely warn.
|
|
* src/copy.c (extent_copy): Do not treat "unwritten extents" specially.
Otherwise, with a release-candidate 2.6.39-rc3 kernel, XFS or ext4,
when using gold as your linker, and if you forget to run "make check",
you could end up installing files full of zeros instead of the expected
binaries. For a lot of discussion, see
http://thread.gmane.org/gmane.comp.file-systems.xfs.general/37895
* tests/cp/fiemap-empty: Disable this test.
|
|
* tests/cp/sparse-fiemap: Remove spurious BEGIN {...} block.
|
|
* tests/filefrag-extent-compare: Don't check the length of the
last extent, as this was seen to vary on XFS, where it leaves
trailing blocks allocated for performance reasons.
* tests/cp/fiemap-empty: Though not seen as an issue in practise,
try to avoid possible issues with the allocator in file systems,
by requesting to allocate a power of 2.
|
|
|
|
* tests/ls/color-norm: s/to to/to/
* gl/lib/mbsalign.h (mbs_align_t): s/or or/or/
* src/extent-scan.c (extent_scan_read): s/the the/the/
* src/libstdbuf.c: s/the the/the/
* tests/misc/stdbuf: s/on on/on/
* ChangeLog-2005: s/for\n\tfor /for\n\t/
|
|
Running the new fiemap-empty test uses 600MB of disk space via
fallocate, and in so doing caused failure in unrelated tests that
were running in parallel on a small file system. Rather than
simply running fallocate (which allocates the space, inducing
disk full when it fails), skip the test if there is less than
800MB of free space, as computed via stat and awk.
* tests/init.cfg (require_file_system_bytes_free_): New function.
* tests/cp/fiemap-empty: Use it.
|
|
* tests/misc/help-version: Sleep only ~30s, not 10m.
The latter was a problem when somehow that sleep process would
hang around and thereby prevent (for up to 10m) a normal unmount
of the temporary partition in which I'd run the tests.
|
|
* tests/cp/preserve-gid: Simply chmod a+rx instead.
That is safer, in case the nameless UID actually has an account,
and might take advantage of root running a program in a directory
under its control
|
|
* tests/cp/preserve-gid: Remove useless use of "env".
|
|
* tests/mv/sticky-to-xpart: Skip rather than failing this test
when run as root and the binaries are not accessible by "nobody".
|
|
* tests/cp/fiemap-empty: Correct typo in comment. Add "FIXME".
|
|
* src/copy.c (extent_copy): Treat an allocated but empty extent
much like a hole. I.E. don't read data we know is going to be NUL.
Also we convert the empty extent to a hole only when SPARSE_ALWAYS
so that the source and dest have the same allocation. This will
be improved soon, when we use fallocate() to do the allocation.
* tests/cp/fiemap-empty: A new test for efficiency and correctness
of copying empty extents.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the change in behavior.
|
|
This bug was introduced in commit ca9e212c, 2009-09-24,
"cp, mv: use linkat to guarantee semantics", which
inadvertently disabled the creation of hardlinks to symlinks.
However rather than implementing the intention of that commit
and relying on gnulib linkat emulation, we'll revert to the
previous emulation as that maintains ownership and timestamps.
* src/copy.c (copy_internal): Use our existing hardlink to
symlink emulation when link() might dereference the symlink.
Also ensure that we copy the timestamps of the original symlink
when we use the emulation.
* tests/cp/link-symlink: Add a test to ensure timestamps copied.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
Reported by Ruediger Meier
|
|
* tests/tail-2/inotify-rotate: Wait 50% longer for grep to succeed.
Without this change, this test would fail consistently when using
"make -j25 check" with F15 in a virtio- and spinning-rust-backed
virtual machine.
|
|
* src/extent-scan.h (struct extent_scan): Add the fm_flags member to
pass to the fiemap scan.
* src/extent-scan.c (extent_need_sync): A new function used to
detect Linux kernels before 2.6.38.
(extent_scan_init): Add FIEMAP_FLAG_SYNC when needed.
* tests/cp/sparse-fiemap: Adjust comment.
* NEWS: Mention the change in behavior.
Indirectly suggested by Mike Frysinger
|
|
* tests/init.cfg (require_selinux_): Skip the test also when
/proc/filesystems does not list selinuxfs.
Add comments.
* cfg.mk (exclude_file_name_regexp--sc_file_system): Exempt
tests/init.cfg, with its use of /proc/filesystems.
Based on the patch by Mathieu Bridon in http://debbugs.gnu.org/8359.
More discussion in http://bugzilla.redhat.com/573111
|
|
* tests/misc/test: Exercise the new operator.
* NEWS (Changes in behavior): Mention it.
|
|
* tests/cp/preserve-gid: Ensure that every process under test uses
the cp binary we've just built. Before this fix, with a restrictive
umask or build-dir permissions, the UID-changing tests would end up
using whatever cp happened to be available through $PATH
Analysis by arbogast.cedric@gmail.com in http://debbugs.gnu.org/8292.
|
|
* tests/filefrag-extent-compare: Merge adjacent extents in
each list before processing, so we correctly account for
split extents in either list.
* tests/cp/sparse-fiemap: Remove the explicit syncing,
which was only changing the way extents were arranged,
and thus working around the extent comparison issue
that was seen on ext4 loop back.
|
|
* gnulib: Update to latest, to address http://debbugs.gnu.org/8230.
When built on Solaris 9 and run on Solaris 10, touch would segfault.
Reported by Ben Walton.
* bootstrap: Update from gnulib.
* tests/init.sh: Likewise.
* NEWS (Bug fixes): Mention this.
|
|
* tests/dd/nocache: Don't assume stdin is a pipe
|
|
* src/dd.c (FFS_MASK): A new macro (Find First Set) refactored
from the following enum as it's now used twice.
(usage): Mention the new 'nocache' flag.
(cache_round): A new function to help ignore requests
to drop cache, that are less than page_size.
(invalidate_cache): A new function to call posix_fadvise()
with the appropriate offset and length. Note we don't
use fdadvise() so we can detect errors when count=0.
(dd_copy): Call invalidate_cache() for the portions read.
(iwrite): Likewise for the portions written.
(main): Call invalidate_cache for page_size slop or
for full file when count=0.
* cfg.mk (sc_dd_O_FLAGS): Adjust to pass.
* doc/coreutils.texi (dd invocation): Describe the 'nocache' flag,
and give some examples of how it can be used.
* tests/dd/nocache: A new test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the new feature.
|
|
* src/du.c (main): Fail on AI_ERR_READ error, rather than merely
diagnosing and continuing. Based on a patch by Stefan Vargyas.
Also move the handling of AI_ERR_EOF into the case stmt.
Do not report ferror/fclose(stdin) failure when we've
already diagnosed e.g., failure to read the DIR, above.
Bug introduced by 2008-11-24 commit 031e2fb5, "du: read and
process --files0-from= input a name at a time,".
* src/wc.c: Handle read failure as with du: do not exit
immediately, but rather go on to print any total and to clean-up.
As above, move the handling of AI_ERR_EOF into the case stmt.
* tests/du/files0-from-dir: New file, to test both du and wc.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
|
|
* tests/cp/sparse-fiemap: Move the PERL check to the top,
since we don't test anything without it. In the loop,
don't use skip_test_ as it exits the test completely.
|