| Age | Commit message (Collapse) | Author |
|---|
|
Recent commit 2da7009d changed the error diagnostic of rm(1) trying
to remove "." or "..". Enhance the corresponding test.
* tests/rm/r-4.sh: Ensure rm(1) outputs the expected error diagnostic.
|
|
Fix a recent regression introduced in commit v8.21-127-g5ee7d8f
Also related to this is the recent query about root run `rm -I`
ignoring the mode bits of a file: https://bugzilla.redhat.com/1013171
* tests/rm/interactive-once.sh: Avoid the messages and
corresponding file presence checks with write protected files
when running as root.
|
|
This adds support for using a constant or "stick" parity bit.
* src/stty.c (usage): Mention the new flag.
* tests/misc/stty.sh: Adjust for the new flag.
* NEWS: Mention the improvement.
* docs/coreutils.texi (stty invocation): Mention the new flag.
|
|
* src/shred.c (dopass): Exit early to avoid redundant heap
allocation, and more importantly avoiding a file sync
when we're writting no data, as this can have side effects.
Also with --verbose, this avoids printing of "pass status"
which could be confusing as to whether data was actually written.
* tests/misc/shred-passes.sh: Ensure the status for data
passes are not written when not doing any data writes.
|
|
Since direct I/O is now enabled with commit v8.21-139-gebaf961
we must handle the case where we write an odd size at the
end of a file (with --exact), or we specify an odd --size that
is larger than 64KiB, or in the very unlikely case of a device
with an odd size. This issue was present since direct I/O
support was first added in v5.3.0, but latent since v6.0.
Theoretically this could have also been an issue after that on
systems which didn't have alignment constraints, but did have
size constraints for direct I/O.
* src/shred.c (dopass): On the first pass for a file, always
retry a write that fails with EINVAL, so we handle direct I/O
failure at either the start or end of the file. Adjust the comment
as the original case is out of date and implicitly handled
by this more general fix.
* tests/misc/shred-exact.sh: Add a test case.
* NEWS: Add a "bug fix" entry for shred since there are
two related issues now fixed.
|
|
* src/copy.c (create_hard_link): Add a bool 'dereference' parameter,
and pass AT_SYMLINK_FOLLOW as 'flags' to linkat() when dereference
is true.
(should_dereference): Add new 'bool' function to determine if a
file should be dereferenced or not.
(copy_internal): Use the above new should_dereference() and remember
its return value in a new local bool 'dereference' variable. Use that
in all three calls to create_hard_link().
* src/cp.c (main): after parsing the options, if x.dereference is
still DEFEF_UNDEFINED and the x.recursive is true, then only set
x.dereference to DEREF_NEVER iff --link was not specified.
* doc/coreutils.texi (cp invocation): Mention that cp(1) does not
follow symbolic links in the source when --link is specified.
Likewise in the description of the -R option when used together with
that option.
* tests/cp/same-file.sh: Adapt the expected results for the -fl,
the -bl and the -bfl tests.
* tests/cp/link-deref.sh: Add a new test.
* tests/local.mk (all_tests): Reference the above new test.
* NEWS (Changes in behavior): Mention the change.
This fixes http://bugs.gnu.org/15173
Co-authored-by: Bernhard Voelker <mail@bernhard-voelker.de>
|
|
* src/md5sum.c (main): Add a comment as to why we continue
to escape names that do not have '\n' but do have '\\' chars.
(print_filename): Use the predetermined boolean to decide
whether to escape or not, so that in the common case we
can output the file name directly, rather than inspecting each char.
* tests/misc/md5sum.pl: Add case to show '\\' chars cause escaping.
* tests/misc/sha1sum.pl: Likewise.
|
|
The reason for having a --quiet option is to
suppress only some subset of possible errors.
The most useful separation here is with usage/internal errors,
and errors due to file creation etc. (i.e. I/O errors).
* src/mktemp.c (main): Match the --help and info docs and
only suppress the file/dir creation error messages.
* tests/misc/mktemp.pl: Adjust accordingly.
|
|
This regression was introduced in commit v6.7-71-g0928c24
* src/rm.c (main): Make the -I option behave like --interactive=once.
* tests/rm/interactive-once.sh: Add cases for single and multiple files.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/9308
|
|
* tests/misc/id-context.sh -> tests/id/context.sh
* tests/misc/id-setgid.sh -> tests/id/setgid.sh
* tests/misc/id-uid.sh -> tests/id/uid.sh
* tests/misc/id-zero.sh -> tests/id/zero.sh
* tests/local.mk: Reference the renamed tests
|
|
* tests/misc/chroot-credentials.sh: Don't assume uid 0
has the "root" name, nor any name for that matter.
|
|
* src/id.c (usage): Remove 'name' from the synopsis,
implying that one can also specify by user ID.
(main): Like chown(1), call parse_user_spec() to implement
user name or ID lookup with appropriate precedence.
* doc/coreutils.texi (id invocation): Mention that
a user ID is supported and how '+' affects lookup order.
* tests/misc/id-groups.sh: Remove test now subsumed into...
* tests/misc/id-uid.sh: New test covering new interface.
* tests/local.mk: Rename the test.
* NEWS: Mention the new feature.
Addresses http://bugs.gnu.org/15421
|
|
* tests/misc/id-zero.sh: Don't check exit status when in -n mode.
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/6196762
|
|
* src/group-list.h (print_group_list): Add a parameter for the
delimiter of type char.
* src/group-list.c (print_group_list): Likewise, and use it instead
of a white space character to delimit the group entries.
* src/groups.c (main): Pass white space character to print_group_list().
* src/id.c (longopts): Add array element for the new long option.
(usage): Document the new option. While at it, fix the alignment
of the descriptions to match that of HELP_OPTION_DESCRIPTION.
(main): Define the bool flag opt_zero indicating the use of the
new option. In the getopt_long loop, handle it.
Output an error diagnostic in the case the --zero option has been
specified together with the default format.
In the case of -gG, pass either a NUL or a white space character to
print_group_list() - depending on the above new flag.
Likewise change the printing of the final newline character: output
a NUL instead if the --zero option has been specified.
* doc/coreutils.texi (id invocation): Document the new option.
While at it, move the @exitstatus macro down after the macro
@primaryAndSupplementaryGroups in order to be consistent with
other texinfo documents.
(groups invocation): Move @exitstatus down after the macro
@primaryAndSupplementaryGroups here, too.
* tests/misc/id-zero.sh: Add new test exercising the new option.
* tests/local.mk (all_tests): Reference it.
* NEWS (New features): Mention the new option.
Fixes http://bugs.gnu.org/9987
|
|
Run "make update-copyright".
* src/numfmt.c: Update copyright year number range. This file has
obviously been added to coreutils after and without the annual update.
* tests/misc/numfmt.pl: Likewise.
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/5584121
du(1) uses the first file object of the two test files linked to the
same inode, 'd/f' and 'd/h', whatever the system returns first.
Use 'd/f' in both the expected and the actual output.
* test/du/inodes.sh: Change the expected output as described above
when returning the --all directory entries (without -l). Also replace
the name of the hardlink 'd/h' by 'd/f' in the actual output.
|
|
* test/du/inodes.sh: In the cases where compare() fails, that function
would show the unified diff automatically. Therefore, remove the
excess "cat out".
In the cases where expecting an empty file, use compare() again
rather than the simpler "test -s" because possible error reports
will then include the file's content for the same reason as above.
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/5582213
* test/du/inodes.sh: Due to undefined order in returned directory
entries, the expected output might not match, so sort both expected
and actual output when returning --all directory entries.
Also use a simpler test for ensuring no errors are output.
|
|
This new option can be used to find directories with a huge
amount of files. The GNU find utility has the printf format
"%h" which prints the number of entries in a directory, but
this is non-cumulative and doesn't handle hard links.
* src/du.c (struct duinfo): Add new member for counting inodes.
(duinfo_init): Initialize inodes member with Zero.
(duinfo_set): Set inodes counter to 1.
(duinfo_add): Sum up the 2 given inodes counters.
(opt_inodes): Add new boolean flag to remember if the --inodes
option has been specified.
(INODES_OPTION): Add new enum value to be used ...
(long_options): ... here.
(usage): Add description of the new option.
(print_size): Pass inodes counter or size to print_only_size,
depending on the inodes mode.
(process_file): Adapt threshold handling: with --inodes, print or
elide the entries according to the struct member inodes.
(main): Add a case for accepting the new INODES_OPTION.
Print a warning diagnostic when --inodes is used together with the
option --apparent-size or -b.
Reset the output_block_size to 1 ... and thus ignoring the
options -m and -k.
* tests/du/inodes.sh: Add a new test.
* tests/local.mk (all_tests): Mention it.
* doc/coreutils.texi (du invocation): Document the new option.
* NEWS: Mention the new option.
|
|
src/copy.c (copy_internal): Use rmdir() rather than unlink()
when the source is a directory, so that empty directories
are replaced in the destination as per POSIX.
* tests/mv/part-rename.sh: Augment with various combinations.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/14763
|
|
Some newer test scripts - partially ones from me - are not executable.
It does not seem to be a problem, but for consistency and to avoid
future problems on unusual platforms or shells change the permissions
by adding the executable bit.
* cfg.mk (sc_tests_executable): Add new syntax-check rule to ensure
that all test scripts are executable.
* tests/df/df-output.sh: Change file mode from 644 to 755.
* tests/du/threshold.sh: Likewise.
* tests/factor/run.sh: Likewise.
* tests/init.sh: Likewise.
* tests/misc/csplit-suppress-matched.pl: Likewise.
* tests/misc/numfmt.pl: Likewise.
* tests/tail-2/retry.sh: Likewise.
|
|
Include the number of arguments which rm received in the "Remove all
arguments?" prompt. This is useful in the, presumably, common case
where the arguments were not provided by hand, but instead were the
result of various shell expansions. A simple, if somewhat contrived,
example (assuming rm is aliased to rm -I) could be:
rm * .o
where the prompt "Remove 120 arguments?" is more likely to make
the user catch the problem.
* src/rm.c (main): Include correctly pluralized n_files
in the output message. Also remove the now redudant "all".
* tests/rm/interactive-always.sh: Adjust to the new prompt.
* tests/rm/interactive-once.sh: Likewise.
|
|
* src/dd.c (STATUS_NONE): Simplify the enum so that
it's more general than just suppressing transfer counts.
Then test this in all locations where non fatal diagnostics
are output.
* tests/dd/misc.sh: Ensure the diagnostic about
being unable to skip past the end of input is suppressed.
* NEWS: Mention the change in behavior.
Fixes http://bugs.gnu.org/14897
|
|
main(): Process new option. Replace input_numbers_option_used()
with a local variable. Re-organize argument processing.
usage(): Describe the new option.
(write_random_numbers): A new function to generate a
permutation of the specified input range with repetition.
(write_random_lines): Likewise for stdin and --echo.
(write_permuted_numbers): New function refactored from
write_permuted_output().
(write_permuted_lines): Likewise.
* tests/misc/shuf.sh: Add tests for --repetitions option.
* doc/coreutils.texi: Mention --repetitions, add examples.
* TODO: Mention an optimization to avoid needing to
read all of the input into memory with --repetitions.
* NEWS: Mention new shuf option.
|
|
* test/misc/shuf.sh: Add tests for erroneous conditions
like multiple '-o' and '--random-source'.
|
|
* src/df.c (filter_mount_list): Initialize devlist->dev_num correctly
when unable to stat() a mount point. This will avoid possible invalid
deduplication done on the list due to use of uninitialized memory.
* tests/df/skip-duplicates.sh: Ensure this code path is exercised.
Also refactor the test to be table driven.
* NEWS: Mention the bug fix.
|
|
* tests/misc/shuf.sh: Restrict the test to the significant
case where we can't in fact read the "unreadable" file.
|
|
This is consistent with the documented interface and
avoids any ambiguity in a user thinking that stdbuf without options
might reset to a "standard" buffering setup.
* src/stdbuf.c (set_libstdbuf_options): Indicate with the return value
whether any env variables were actually set.
(main): Fail unless some env variables were set.
* tests/misc/stdbuf.sh: Ensure this constraint is enforced.
* NEWS: Mention the small change in behavior.
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/5221053
* tests/tail-2/retry.sh: Ensure the 'out' file is truncated,
as it's used to arbitrate the run order of commands.
Relying on the truncation in the background tail command
is racy because the truncation can occur after the fork
of the background shell and thus wait4lines would not wait
for output to occur in 'out', which would mean that the
'missing' file could be populated by the time tail(1)
gets to process it.
|
|
* src/od.c (PRINT_FIELDS): Declare "i" to be of type uintmax_t, so that
the numerator in the expression for "next_pad" does not overflow.
(print_named_ascii): Likewise.
(print_ascii): Likewise.
Bug introduced via commit v6.12-42-g20c0b87.
* tests/misc/od.pl: Exercise each of the three affected code paths.
* NEWS (Bug fixes): Mention it.
Reported by Rich Burridge.
|
|
* tests/misc/head-c.sh: Don't try to elide 1 exabytes, since on
32-bit systems, that number is not representable as a size_t.
This command would fail on 32-bit systems, where SIZE_MAX < 1E:
head --bytes=-E < /dev/null
Instead of "E", use $SSIZE_MAX.
For discussion, see http://bugs.gnu.org/13530
|
|
* tests/split/line-bytes.sh: Since we've limited virtual memory to
20MB, choose a smaller size, 1GiB (which is <= SIZE_MAX) rather than
1EiB, which is larger than SIZE_MAX on 32-bit systems.
I confirmed that this test still fails when the split.c-modifying
part of v8.21-58-gfec363c is backed out.
|
|
* tests/ls/block-size.sh (size_etc): The sed expression through which
we filtered the output of "ls -l ..." assumed that the user and group
name components of each line would not contain spaces. Avoid the
problem by using -og instead of -l, thus not printing either of those
fields. Adjust the sed expression accordingly.
|
|
* tests/misc/numfmt.pl: Avoid a spurious failure when
/bin/sh is dash (as can happen on Debian systems).
|
|
* src/split.c (line_bytes_split): Rewrite to only buffer
when necessary. I.E. only increase the buffer when we've
already lines output in a split and we encounter a line
larger than the input buffer size, in which case a hold
buffer will be increased in increments of the input buffer size.
(lines_rr): Use the more abstract xalloc_die() just like
we did in line_bytes_split(), rather than explicitly
printing the "memory exhausted" message and exiting.
* tests/split/line-bytes.sh: Add a new test for this
function which previously had no test coverage.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
Fixes http://bugs.gnu.org/13537
|
|
* tests/misc/cut-huge-range.sh (subtract_one): New string.
(CUT_MAX): Don't pass a too-large integer to 'expr'.
|
|
This fixes Bug#14371, reported by Killer Bassist.
* NEWS: Document this.
* src/mkdir.c (struct mkdir_options): Remove member ancestor_mode.
New member umask_value. All uses changed.
* src/mkdir.c (make_ancestor): Fix umask assumption.
* src/mkdir.c, src/mkfifo.c, src/mknod.c (main):
Leave umask alone. This requires invoking lchmod after creating
the file, which introduces a race condition, but this can't be
avoided on hosts with "POSIX" default ACLs, and there's no easy
way with network file systems to tell what kind of host the
directory is on.
* tests/local.mk (all_tests): Add tests/mkdir/p-acl.sh.
* tests/mkdir/p-acl.sh: New file.
|
|
Use a sentinel value that's checked implicitly, rather than
a bit array, to determine if an item should be output.
Benchmark results for this change are:
$ yes abcdfeg | head -n1MB > big-file
$ for c in orig sentinel; do
src/cut-$c 2>/dev/null
echo -ne "\n== $c =="
time src/cut-$c -b1,3 big-file > /dev/null
done
== orig ==
real 0m0.049s
user 0m0.044s
sys 0m0.005s
== sentinel ==
real 0m0.035s
user 0m0.032s
sys 0m0.002s
## Again with --output-delimiter ##
$ for c in orig sentinel; do
src/cut-$c 2>/dev/null
echo -ne "\n== $c =="
time src/cut-$c -b1,3 --output-delimiter=: big-file > /dev/null
done
== orig ==
real 0m0.106s
user 0m0.103s
sys 0m0.002s
== sentinel ==
real 0m0.055s
user 0m0.052s
sys 0m0.003s
eol_range_start: Removed. 'n-' is no longer treated specially,
and instead SIZE_MAX is set for the 'hi' limit, and tested implicitly.
complement_rp: Used to complement 'rp' when '--complement' is specified.
ADD_RANGE_PAIR: Macro renamed to 'add_range_pair' function.
* tests/misc/cut-huge-range.sh: Adjust to the SENTINEL value.
Also remove the overlapping range test as this is no longer
dependent on large ranges and also is already handled with
the EOL-subsumed-3 test in cut.pl.
|
|
This issue was introduced in commit v8.21-43-g3e466ad
* src/cut.c (set_fields): Process all range pairs when merging.
* tests/misc/cut-huge-range.sh: Add a test for this edge case.
Also fix an issue where we could miss reported errors due
to truncation of the 'err' file.
|
|
print_kth() is the central function of cut used to
determine if an item is to be output or not,
so simplify it by moving some logic outside.
Benchmark results for this change are:
$ yes abcdfeg | head -n1MB > big-file
$ for c in orig split; do
src/cut-$c 2>/dev/null
echo -ne "\n== $c =="
time src/cut-$c -b1,3 big-file > /dev/null
done
== orig ==
real 0m0.111s
user 0m0.108s
sys 0m0.002s
== split ==
real 0m0.088s
user 0m0.081s
sys 0m0.007s
* src/cut.c (print_kth): Refactor a branch to outside the function.
Related to http://bugs.gnu.org/13127
|
|
The current implementation of cut, uses a bit array,
an array of `struct range_pair's, and (when --output-delimiter
is specified) a hash_table. The new implementation will use
only an array of `struct range_pair's.
The old implementation is memory inefficient because:
1. When -b with a big num is specified, it allocates a lot of
memory for `printable_field'.
2. When --output-delimiter is specified, it will allocate 31 buckets.
Even if only a few ranges are specified.
Note CPU overhead is increased to determine if an item is to be printed,
as shown by:
$ yes abcdfeg | head -n1MB > big-file
$ for c in with-bitarray without-bitarray; do
src/cut-$c 2>/dev/null
echo -ne "\n== $c =="
time src/cut-$c -b1,3 big-file > /dev/null
done
== with-bitarray ==
real 0m0.084s
user 0m0.078s
sys 0m0.006s
== without-bitarray ==
real 0m0.111s
user 0m0.108s
sys 0m0.002s
Subsequent patches will reduce this overhead.
* src/cut.c (set_fields): Set and initialize RP
instead of printable_field.
* src/cut.c (is_range_start_index): Use CURRENT_RP rather than a hash.
* tests/misc/cut.pl: Check if `eol_range_start' is set correctly.
* tests/misc/cut-huge-range.sh: Rename from cut-huge-to-eol-range.sh,
and add a test to verify large amounts of mem aren't allocated.
Fixes http://bugs.gnu.org/13127
|
|
* init.cfg (require_ulimit_v_): Renamed from require_ulimit_
as this only checks for ulimit -v support. Other uses of
ulimit -t and ulimit -n in tests shouldn't cause false failures
if not supported.
* cfg.mk (sc_prohibit_test_ulimit_without_require_): A new syntax check
to ensure that require_ulimit_v_() is used iff required.
* tests/misc/head-c.sh: Add missing call to require_ulimit_v_.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise.
* tests/split/r-chunk.sh: Remove non mandatory require_ulimit_ call.
* tests/misc/sort-merge-fdlimit.sh: Likewise.
* tests/cp/link-heap.sh: Adjust to renamed require_ulimit_v_.
* tests/dd/no-allocate.sh: Likewise.
* tests/misc/csplit-heap.sh: Likewise.
* tests/misc/cut-huge-to-eol-range.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
|
|
As a side effect of the previous commit which fixes 'tail -f --retry'
to wait for a file to appear, tail would not exit when the last file
appears untailable and gives up on this file.
This can happen, for example, when the argument file name appears
as directory. Tail sets the 'ignore' flag of this file to true,
but instead of exiting the program, tail would continue the loop.
* src/tail.c (any_live_files): Change the function to return true
if any of the files is still tailable or if tail should continue to
try to check again.
(tail_forever): Change the condition to break the loop in the
"no files remaining" case, because now any_live_files() will care
about it, as mentioned above.
(parse_options): When --retry is used without any follow mode,
then reset reopen_inaccessible_files to false.
* tests/tail-2/retry.sh: Add test case.
|
|
The --retry option is indeed useful for both following modes
by name and by file descriptor. The difference is that in the
latter case, it is effective only during the initial open.
As a regression of the implementation of the inotify support,
tail -f --retry would immediately exit if the given file is
inaccessible.
* src/tail.c (usage): Change the description of the --retry option:
remove the note that this option would mainly be useful when
following by name.
(main): Change diagnosing dubios uses of --retry option:
when the --retry option is used without following, then issue
a warning that this option is ignored; when it is used together
with --follow=descriptor, then issue a warning that it is only
effective for the initial open.
Disable inotify also in the case when the initial open in tail_file()
failed (which is the actual bug fix).
* init.cfg (retry_delay_): Pass excess arguments to the test function.
* tests/tail-2/retry.sh: Add new tests.
* tests/local.mk (all_tests): Mention it.
* doc/coreutils.texi (tail invocation): Enhance the documentation
of the --retry option. Clarify the difference in tail's behavior
regarding the --retry option when combined with the following modes
name versus descriptor.
* NEWS (Bug fixes): Mention the fix.
Reported by Noel Morrison in:
http://lists.gnu.org/archive/html/coreutils/2013-04/msg00003.html
|
|
On OS X it was seen that the group ID used for new files,
are set to a that of the directory rather than the current user.
It's not currently understood when this happens, but it was confirmed
that ACLs, extended attributes and setgid bits are _not_ involved.
* init.cfg (skip_if_nondefault_group_): A new function to detect
and avoid this situation. Document with links to the discussions
for hopefully future clarification.
* tests/install/install-C-root.sh: Use the new function.
* tests/install/install-C-selinux.sh: Likewise.
* tests/install/install-C.sh: Likewise.
|
|
* src/head.c (elide_tail_bytes_pipe): Don't use calloc as that
bypasses memory overcommit due to the zeroing requirement.
Also realloc rather than malloc the pointer array to avoid
dependence on overcommit entirely.
* tests/misc/head-c.sh: Add a test case.
Fixes http://bugs.gnu.org/13530
|
|
* src/dd.c: Add new static global variable ibuf.
(alloc_ibuf, alloc_obuf): New functions factored from dd_copy().
(dd_copy): Call the new functions to allocate memory for
ibuf and obuf when necessary.
(skip): Likewise.
* tests/dd/no-allocate.sh: New test.
* tests/local.mk: Reference the test.
|
|
With --suppress-matched, the lines that match the pattern will not be
printed in the output files. I.E. the first line from the second
and subsequent splits will be suppressed.
* src/csplit.c: process_regexp(),process_line_count(): Don't output the
matched lines. Since csplit includes "up to but not including" matched
lines in each split, the first line (in the next group) is the matched
line - so just skip it.
main(): Handle new option.
usage(): Mention new option.
* doc/coreutils.texi (csplit invocation): Mention new option, examples.
* tests/misc/csplit-suppress-matched.pl: New test script.
* tests/local.mk: Reference the new test.
* NEWS: Mention new feature.
|
|
* init.cfg (require_gcc_shared_): A new function to check
that we can build shared libraries in the particular manner
we use in our tests.
* tests/cp/nfs-removal-race.sh: Use require_gcc_shared_.
Then fail rather than skip, if the actual shared lib build fails.
* tests/df/no-mtab-status.sh: Likewise.
* tests/df/skip-duplicates.sh: Likewise.
* tests/ls/getxattr-speedup.sh: Likewise.
Reported in http://bugs.gnu.org/14024
|
|
* src/tail.c (main): If -n0 or -c0 were specified without -f,
then no data would ever be output, so exit without reading input.
* tests/tail-2/tail-n0f.sh: Augment the related test with this case.
|
