| Age | Commit message (Collapse) | Author |
|---|
|
file_t is now mapped to unlabeled_t as per:
http://danwalsh.livejournal.com/68189.html
Therefore use the latter to ensure we match correctly.
This is needed on >= Fedora 21 for example,
while it also works on earlier releases.
|
|
We may run into a race condition if we treat hard links to the same file
as distinct files. If we do 'mv a b' and 'mv b a' in parallel, both a
and b can disappear from the file system. The reason is that in this
case the unlink on src is called and the system calls can end up being
run in the order where unlink(a) and unlink(b) are the last two system
calls. Therefore exit with an error code so that we avoid the potential
data loss.
* src/copy.c (same_file_ok): Don't set unlink_src that was used by mv,
and return false for two hardlinks to a file in move_mode.
*src/copy.c (copy_internal): No longer honor the unlink_src option,
used only by mv.
NEWS: Mention the change in behavior.
* tests/cp/same-file.sh: Augment to cover the `cp -a hlsl1 sl1` case.
* tests/mv/hard-verbose.sh: Remove no longer needed test.
* tests/local.mk: Remove the reference to hard-verbose.sh.
* tests/mv/hard-4.sh: Adjust so we fail in this case.
* tests/mv/i-4.sh: Likewise.
* tests/mv/symlink-onto-hardlink-to-self.sh: Likewise.
|
|
* tests/tail-2/F-vs-missing.sh: Comment with the correct total delay.
* tests/tail-2/F-vs-rename.shi: Likewise.
* tests/tail-2/flush-initial.sh: Likewise.
* tests/tail-2/inotify-hash-abuse.sh: Likewise.
* tests/tail-2/pipe-f2.sh: Likewise.
* tests/misc/chroot-fail.sh: Initialize can_chroot_root in all cases.
|
|
* tests/tail-2/inotify-rotate.sh: Use retry_delay_
to employ an exponential backoff with a total delay of
up to 25.5s. The 15s delay was seen to trigger a false
failure in http://hydra.nixos.org/build/16546517
Also remove the .1s sleep in each of the 50 iterations
to reduce the running time of the test and thus the
expensive_ tag on this test was removed.
Also ensure that we use the standard exit procedure
upon failure to avoid any erroneous diagnostics due
to persistent files on NFS.
|
|
* tests/du/move-dir-while-traversing.sh: Catch failure of retry_delay_
when waiting for the watcher to get ready.
|
|
* tests/d_type-check: The hardcoded name doesn't hold true for all
Linux/glibc platforms, let alone Linux/non-glibc.
Use ctypes.util.find_library() instead to search for the library.
|
|
At least the MHz number in /proc/cpuinfo may change, thus leading to
a false positive failure when comparing the expected against the
actual output file. Use an invariant file instead: /proc/version.
* tests/misc/head-c.sh: s/cpuinfo/version/
|
|
* cp/proc-zero-len.sh: Search the 'err' file
for the error to ignore, not stdin.
|
|
* src/chroot.c (is_root): Adjust to compare canonicalized paths
rather than inodes, to handle (return false in) the case where
we have a tree that is constructed by first bind mounting "/"
(thus having the same inode).
(main): Unconditionally call chroot() because it's safer
and of minimal performance benefit to avoid in this case.
This will cause inconsistency with some platforms
not allowing `chroot / true` for non root users.
* tests/misc/chroot-fail.sh: Adjust appropriately.
* NEWS: Mention the bug fixes.
Fixes http://bugs.gnu.org/18736
|
|
Previously cp would not detect runs of NULs that were
smaller than the buffer size used for I/O (currently 128KiB).
* src/copy.c (copy_reg): Use an independent hole_size, set to
st_blksize, to increase the chances of detecting a representable hole,
in a run of NULs read from the input.
(create_hole): A new function refactored from sparse_copy() and
extent_copy() so we have a single place to handle holes.
(sparse_copy): Adjust to loop over the larger input buffer
in chunks of the passed hole size. Also adjust to only call
lseek once per hole, rather than at least once per input buffer.
* tests/cp/sparse.sh: Add test cases for various sparse chunk sizes.
* NEWS: Mention the improvement.
|
|
* tests/split/b-chunk.sh: Skip each file that does not exist.
Some systems lack /proc/version or /sys/kernel/profiling
|
|
* tests/misc/od-j.sh: Non standard comparison order.
* tests/split/b-chunk.sh: Confusing input file name.
* tests/tail-2/tail-c.sh: Redundant require ulimit.
|
|
Fix similar problems in head, od, split, tac, and tail.
Reported by George Shuklin in: http://bugs.gnu.org/18621
* NEWS: Document this.
* src/head.c (elseek): Move up.
(elide_tail_bytes_pipe, elide_tail_lines_pipe): New arg
CURRENT_POS. All uses changed.
(elide_tail_bytes_file, elide_tail_lines_file):
New arg ST and remove arg SIZE. All uses changed.
* src/head.c (elide_tail_bytes_file):
* src/od.c (skip): Avoid optimization for /sys files, where
st_size is bogus and st_size == st_blksize.
Don't report error at EOF when not optimizing.
* src/head.c, src/od.c, src/tail.c: Include "stat-size.h".
* src/split.c (input_file_size): New function.
(bytes_split, lines_chunk_split, bytes_chunk_extract): New arg
INITIAL_READ. All uses changed. Use it to double-check st_size.
* src/tac.c (tac_seekable): New arg FILE_POS. All uses changed.
(copy_to_temp): Return size of temp file. All uses changed.
* src/tac.c (tac_seekable):
* src/tail.c (tail_bytes):
* src/wc.c (wc):
Don't trust st_size; double-check by reading.
* src/wc.c (wc): New arg CURRENT_POS. All uses changed.
* tests/local.mk (all_tests): Add tests/misc/wc-proc.sh,
tests/misc/od-j.sh, tests/tail-2/tail-c.sh.
* tests/misc/head-c.sh:
* tests/misc/tac-2-nonseekable.sh:
* tests/split/b-chunk.sh:
Add tests for problems with /proc and /sys files.
* tests/misc/od-j.sh, tests/misc/wc-proc.sh, tests/tail-2/tail-c.sh:
New files.
|
|
* src/dd.c: Report the transfer progress every second when the
new status=progress level is used. Adjust the handling and
description of the status= option so that they're treated as
mutually exclusive levels, rather than flags with implicit precedence.
* doc/coreutils.texi (dd invocation): Document the new progress
status level. Reference the new level in the description of SIGUSR1.
* tests/dd/stats.sh: Add new test for status=progress.
* tests/dd/misc.sh: Change so status=none only takes precedence
if it's the last level specified.
* NEWS: Mention the feature.
|
|
* src/dd.c (ifd_reopen): A new wrapper to ensure we
don't exit upon receiving a SIGUSR1 in a blocking open()
on a fifo for example.
(iftruncate): Likewise for ftruncate().
(iread): Process signals also after a short read.
(install_signal_handlers): Install SIGINFO/SIGUSR1 handler
even if set to SIG_IGN, as this is what the parent can easily
set from a shell script that can send SIGUSR1 without the
possiblity of inadvertently killing the dd process.
* doc/coreutils.texi (dd invocation): Improve the example to
show robust usage wrt signal races and short reads.
* tests/dd/stats.sh: A new test for various signal races.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
|
|
Problem reported by Göran Uddeborg in: http://bugs.gnu.org/18540
* tests/misc/sort.pl: New test 23.
|
|
Following on from commit v5.92-729-g130dd06, also avoid
the erroneous directory hardlink warning with -H.
* src/copy.c (copy_internal): Also handle the -H case
for command line arguments.
* tests/cp/duplicate-sources.sh: Augment the test case.
* NEWS: Augment the news entry.
|
|
* src/copy.c (copy_internal): Handle the case where we have the
same destination directory as already encountered, which can only
be due to the corresponding source directory being specified multiple
times.
* tests/cp/duplicate-sources.sh: Add a test for the new multiply
specified directory case, and the existing multiply specified file case.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
|
|
On XFS, when creating the ~2G test file 'big' in a for-loop by
appending 20M each time, the file ends up using ~4G - visible in
'st_blocks'. The unused space would be reclaimed later.
This feature is called "speculative preallocation" which aims at
avoiding fragmentation.
According to the XFS FAQ [1], there are two particular aspects of
XFS speculative preallocation that are triggering this:
1. "Applications that repeatedly trigger preallocation and reclaim
cycles [after file close] can cause fragmentation.
Therefore, this pattern is detected and causes the preallocation
to persist beyond the lifecycle of the file descriptor."
2. "Preallocation sizes grow as files grow larger."
[1] http://xfs.org/index.php/XFS_FAQ
Avoid one of the above by only doing a single close (reclaim cycle).
* tests/du/2g.sh: Similar to the fix for a dd test (see commit
v8.22-65-g7c03fe2), avoid speculative preallocation by creating
the 'big' file in one go instead of appending to it in the loop.
Remove debugging statements as the output with 'set -x' is
sufficient nowadays.
|
|
Problem reported by Vincent Lefevre in: http://bugs.gnu.org/18449
* src/cat.c (main): Allow copying an empty file to itself.
* tests/misc/cat-self.sh: New test.
* tests/local.mk (all_tests): Add it.
|
|
Reported by Andreas Schwab in: http://bugs.gnu.org/18057
* tests/tail-2/inotify-race.sh (break_src):
Use abs_top_srcdir, not abs_top_builddir.
|
|
Since commit v8.22-94-g99960ee, chroot(1) skips the chroot(2) syscall
for "/" arguments (and synonyms). The problem is that it also skips
the following chdir("/") call in that case. The latter breaks existing
scripts which expect "/" to be the working directory inside the chroot.
While the first part of the change - i.e., skipping chroot("/") - is
okay for consistency with systems where it might succeed for a non-root
user, the second part might be malicious, e.g.
cd /home/user && chroot '/' bin/foo
In the "best" case, chroot(1) could not execute 'bin/foo' with ENOENT,
but in the worst case, chroot(1) would execute '/home/user/bin/foo' in
the case that exists - instead of '/bin/foo'.
Revert that second part of the patch, i.e., perform the chdir("/)
in the common case again - unless the new --skip-chdir option is
specified. Restrict this new option to the case of "/" arguments.
* src/chroot.c (SKIP_CHDIR): Add enum.
(long_opts): Add entry for the new --skip-chdir option.
(usage): Add --skip-chdir option, and while at it, move the other
to options into alphabetical order.
(main): Accept the above new option, allowing it only in the case
when NEWROOT is the old "/".
Move down the chdir() call after the if-clause to ensure it is
run in any case - unless --skip-chdir is specified.
Add a 'newroot' variable for the new root directory as it is used
in a couple of places now.
* tests/misc/chroot-fail.sh: Invert the last tests which check the
working directory of the execvp()ed program when a "/"-like
argument was passed: now expect it to be "/" - unless --skip-chdir
is given.
* doc/coreutils.texi (chroot invocation): Document the new option.
Document that chroot(1) usually calls chdir("/") unless the new
--skip-chdir option is specified. Sort options.
* NEWS (Changes in behavior): Mention the fix.
(New features): Mention the new option.
* init.cfg (nonroot_has_perm_): Add chroot's new --skip-chdir option.
* tests/cp/preserve-gid.sh (t1): Likewise.
* tests/cp/special-bits.sh: Likewise.
* tests/id/setgid.sh: Likewise.
* tests/misc/truncate-owned-by-other.sh: Likewise.
* tests/mv/sticky-to-xpart.sh: Likewise.
* tests/rm/fail-2eperm.sh: Likewise.
* tests/rm/no-give-up.sh: Likewise.
* tests/touch/now-owned-by-other.sh: Likewise.
Reported by Andreas Schwab in http://bugs.gnu.org/18062
|
|
* tests/misc/env.sh: Skip if we can't execute the generated shebang,
which would be the case if there are spaces in the directory hierarchy.
This is triggered by `make distcheck`
|
|
With libselinux-2.2.1-6.fc20.x86_64, kernel-3.12.6-300.fc20.x86_64
`cp --preserve=context src dst` was seen to succeed when src and
dst where on the same fixed context file system, as lsetfilecon()
returned success in this case when the context wasn't being changed.
* tests/cp/cp-a-selinux.sh: Copy from a different file system to
most likely have a different context that will test context
setting logic correctly.
|
|
* tests/misc/od-endian.sh: '\n' is not generally supported
in the replacement, so use the more portable "\\$NL".
|
|
* tests/dd/ascii.sh: Quote so that '\\' is passed
to printf rather than a single '\', as that's not portable.
bash, dash, zsh and external solaris printf were seen to support
printf '\%03o' 1 2
while ksh, freebsh shell and external GNU printf need the more portable
printf '\\%03o' 1 2
Note we don't use env here to call the coreutils printf implementation,
as there are many printf calls, so relying on portable shell
implementations will be faster.
|
|
* tests/split/b-chunk.sh: Never show the rm prompt which would
hang the test suite. This was seen when split erroneously
created files with no persmissions, which was triggered by
this compiler bug in clang 3.4:
http://llvm.org/bugs/show_bug.cgi?id=18346
|
|
Add the --enable-single-binary option to the configure file.
When enabled, this option builds a single binary file containing
the selected tools. Which tool gets executed depends on the value
of argv[0] which can be set implicitly through symlinks to the
single program.
This setup reduces significantly the size of a complete coreutils
install, since code from lib/libcoreutils.a is not duplicated in
every one of the more than 100 binaries. Runtime overhead is
increased due to more dynamic libraries being loaded, and extra
initialization being performed for all utils. Also initially
a larger binary is loaded from storage, though this is usually
alleviated due to caching and lazy mmaping of unused blocks,
and in fact the single binary should have better caching
characteristics.
Comparing the size of the individual versus single binary on x86_64:
$ cd src
$ size coreutils
$ size -t $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
text data bss dec hex filename
1097416 5388 88432 1191236 122d44 src/coreutils
4901010 124964 163768 5189742 4f306e (TOTALS)
Storage requirements are reduced similarly:
$ cd src
$ du -h coreutils
$ du -ch $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
1.2M coreutils
5.3M total
When installing, the makefile will create either symlinks or
shebangs based on the --enable-single-binary setting, for
each configured tool. In this way, all the tools are still
callable individually, but they are all implemented by the same
"coreutils" binary installed on the same directory.
* .gitignore: Add new generated files.
* Makefile.am: New rules to generate build-aux/gen-single-binary.sh
and install symlinks.
* NEWS: Mention the new feature.
* README: Add "coreutils" to the list of utils.
* bootstrap.conf: Regenerate src/single-binary.mk
* build-aux/gen-lists-of-programs.sh: New --list-progs option.
* build-aux/gen-single-binary.sh: Regenerate
* configure.ac: New --enable-single-binary option and other variables.
Disallow --enable-single-binary=symlinks with --program-prefix et. al.
* man/coreutils.x: Manpage hook.
* man/local.mk: Add manpage hook and fix dependencies.
* src/coreutils.c: Multicall implementation.
* src/local.mk: New rules for the single binary option.
* tests/local.mk: Add $single_binary_progs to support
require_built_() from init.cfg
* tests/misc/env.sh: Avoid the use of symlink to echo.
* tests/misc/help-version.sh: Add exception for coreutils.
* tests/install/basic-1.sh: Really avoid using ginstall strip
functionality if there is an issue with the independent strip command.
* src/kill.c: Changes to call exit() in main.
* src/readlink.c: Likewise.
* src/shuf.c: Likewise.
* src/timeout.c: Likewise.
* src/truncate.c: Likewise.
|
|
Avoid complicated and error-prone parsing of df's output via
sed(1), cut(1), etc., and instead use df's more modern --output
option.
* src/ioblksize.h (in a comment): Simplify the extraction of the
device name of the mounted file system from df's output.
* tests/dd/skip-seek-past-dev.sh: Likewise.
* tests/du/2g.sh: Likewise for the 'avail' column here.
Also avoid the deprecated use of "tail -NUM".
* tests/misc/stat-mount.sh: While at it, remove the determination
of the mount point of "." via df(1) plus sed(1) as it is unused
since commit v8.5-159-gf57cb37 anyway. Instead, improve this test
by verifying that the output of "stat -c%m ." at least starts with
a slash '/'.
|
|
Revert commit v8.22-131-g3e89d5b as even though POSIX
states that the default mode should be -L,
common practice for stand-alone pwd implementations
is to default to -P.
* src/pwd.c (usage): Retain mention of the default mode of operation.
Suggested by Bob Proulx
|
|
* tests/ls/readdir-mountpoint-inode.sh: Quote appropriately
to process mount points with spaces in the path.
Previously items like these would usually be skipped,
though if the path also contained a '-' for example,
that would stat stdin, thus producing a wrong inode
and a false failure.
Fixes http://bugs.gnu.org/17863
|
|
* tests/df/no-mtab-status.sh: Skip if getmntent() not available.
* tests/df/skip-duplicates.sh: Likewise.
Fixes http://bugs.gnu.org/17863
|
|
This works for any program that might also be a shell built-in.
It is more concise. In addition, it makes output more reproducible:
some diagnostics include argv[0], which will now be just the program
name, rather than the full absolute name of the executable.
* tests/misc/sort-compress.sh: Use env kill, rather than absolute name.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/touch/no-dereference.sh: Do the same for two uses of "test".
* tests/touch/no-create-missing.sh: Likewise.
|
|
* tests/misc/pwd-option.sh (base): Initialize with -P,
now that -L is the default, to accommodate an initial
working directory with a symlink component.
* tests/misc/readlink-fp-loop.sh: Use $(env pwd -P) to get the
absolute working directory. Using "env" ensures we do not invoke
any shell built-in, and PATH ensures we invoke the one from coreutils.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
|
|
The security_context_t type was always an artificial separation
from a standard char* string, and various libselinux using code
assumed both were synonymous. In addition, prior to libselinux 2.3
function declarations were incorrect wrt constness of this type.
Here we replace security_context_t with char*, and also
provide a wrapper function to cater for the const issue on
older libselinux.
* src/system.h (se_const): A new function to avoid and identify
the const issue on older libselinux.
* src/copy.c: s/security_context_t/char */.
* src/cp.c: Likewise.
* src/id.c: Likewise.
* src/install.c: Likewise.
* src/ls.c: Likewise.
* src/mkdir.c: Likewise.
* src/mkfifo.c: Likewise.
* src/mknod.c: Likewise.
* src/runcon.c: Likewise.
* src/selinux.c: Likewise.
* tests/cp/no-ctx.sh: Likewise.
* src/chcon.c: Likesize.
|
|
* src/pwd.c (main): Adjust default mode to be "logical"
and independent of the POSIXLY_CORRECT env var.
(usage): Mention the default mode of operation.
* doc/coreutils.texi (pwd invocation): Adjust accordingly.
* tests/misc/pwd-option.sh: Likewise.
* NEWS: Mention the change in behavior.
|
|
* HACKING: GID is more useful in tests than group name, so rename
input param from NON_ROOT_GROUP to NON_ROOT_GID to make it obvious
that only a group ID is now acceptable, thus allowing GID lookups
to be avoided throughout the tests.
* init.cfg (require_root_): Likewise.
* tests/misc/truncate-owned-by-other.sh: Avoid looking up the GID.
* tests/touch/now-owned-by-other.sh: Likewise.
* tests/misc/chroot-credentials.sh: Likewise. Also fix an instance
of comparison against NON_ROOT_GROUP which would have given a false
failure if a non numeric value was passed in.
* tests/id/setgid.sh: Use previously looked up gid as a more
accurate base for the subsequent adjustment, and move
the uid lookup within chroot, rather than having the overhead
of a separate `id` invocation.
|
|
* src/id.c (print_full_info): When no user is specified,
output the effective group for the _process_, rather than
the default group from the system database, which may be different.
* tests/id/setgid.sh: Add a case for `id` as well as `id -G`.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/7320
Reported at http://bugzilla.redhat.com/1016163
|
|
* src/df.c (last_device_for_mount): A new function to identify
the last device mounted for a mount point.
(get_disk): Use the above to discard mount entries for a device,
where a later mount entry uses a different device name than
that of the user specified device.
* tests/df/over-mount-device.sh: A new root test.
* tests/local.mk: Reference the new test.
* NEWS: Reword for all these related recent fixes.
Discussed at: http://bugs.gnu.org/16539#69
|
|
A system provided mount entry may be unavailable due to TOCTOU race,
or if another device has been over-mounted at that position, or due to
access permissions. In all these cases output "-" placeholder values
rather than either producing an error, or in the over-mount case
outputting values for the wrong device.
* src/df.c (device_list): A new global list now updated by
filter_mount_list().
(filter_mount_list): Adjust to take a parameter as to whether
update the global mount list, or only the mount <-> device ID mapping.
(get_dev): Use the device ID mapping to ensure we're not outputting
stats for the wrong device. Also output placeholder values when we
can't access a system specified mount point.
(get_all_entries): Set the DEVICE_ONLY param for filter_mount_list().
(devname_for_dev): A new function to search the mount <-> dev mapping.
* test/df/skip-duplicates.sh: Adjust accordingly.
* NEWS: Mention the bug fixes.
Discussed at: http://bugs.gnu.org/16539
|
|
* src/du.c (process_file): Treat cycles due to bind mounts
like cycles due to following symlinks.
* tests/du/bind-mount-dir-cycle.sh: Adjust accordingly.
* NEWS: Mention the change in behavior.
Reported at http://bugzilla.redhat.com/836557
|
|
* src/df.c (filter_mount_list): Recent commit v8.22-108-g25a2c94
failed to copy file system type along with the updated device name.
Therefore simply replace the existing mount entry with the
current one with all the latest device details. Note the name,
even if not shorter in this entry, will be replaced with a shorter
name in a subsequent mount entry.
* tests/df/skip-duplicates.sh: Add a test case.
|
|
* src/seq.c (main): Avoid seq_fast() with a start or end of -0.
* tests/misc/seq.pl: Add test cases.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/17800
|
|
* tests/install/d-slashdot.sh: 'ginstall' is the binary name
in the build directory, not 'install'.
|
|
* src/install.c (install_file_in_file_parents): Factor out the
creation of any parent directories into ...
(mkancesdirs_safe_wd): ... this new function.
(install_file_in_dir): Add the parameter 'mkdir_and_install', and
call the above new function if it evaluates to true.
(main): During parsing of the -t option, move the check whether
the target_directory exists down after the option parsing loop,
and do not complain about stat(optarg,...) failing if -D was given.
Pass 'mkdir_and_install' to install_file_in_dir().
* doc/coreutils.texi (install invocation): Remove the (false)
restriction that -D would be ignored together with -t. Instead,
clarify install's new bahavior.
Fix the node's reference in the top-level @direntry for consistency.
* src/install/basic-1.sh: Add tests for the now-allowed combination
of the -D and -t options.
* NEWS: Mention the improvement.
|
|
* gnulib: Update to latest.
* tests/init.sh: Update from gnulib.
|
|
* src/true.c (main): Add a comment about the possibility
of true returning EXIT_FAILURE due to write failure.
* tests/misc/false-status.sh: Fix so we're testing
the tool and not the shell builtin. Add a case for true(1).
* tests/misc/help-version.sh: Skip /dev/full test
for true as well as false since the exit status is tested separately.
Also remove the iterations for different LC_MESSAGES, as this was only
applied for false(1). Translations are not honored in the test dir
and so would need separate handling in any case.
|
|
commits v8.20-98-g51ce0bf and v8.20-99-gd302aed changed cut(1)
to process each line independently and thus promptly output
each line without buffering. As part of those changes we removed
the special handling of --delimiter=$'\n' --fields=... which
could be used to select arbitrary (ranges of) lines, so as to
simplify and optimize the implementation while also matching the
behavior of different cut(1) implementations.
However that GNU behavior was in place for a long time, and
could be useful in certain cases like making a separated list like
`seq 10 | cut -f1- -d$'\n' --output-delimiter=,` although other tools
like head(1) and paste(1) are more suited to this operation.
This patch reinstates that functionality but restricts the
"line behind" buffering behavior to only the -d$'\n' case.
We also fix the following related edge case to be more consistent:
before> printf "\n" | cut -s -d$'\n' -f1- | wc -l
2
before> printf "\n" | cut -d$'\n' -f1- | wc -l
1
after > printf "\n" | cut -s -d$'\n' -f1- | wc -l
1
after > printf "\n" | cut -d$'\n' -f1- | wc -l
1
* src/cut.c (cut_fields): Adjust as discussed above.
* tests/misc/cut.pl: Likewise.
* NEWS: Mention the change in behavior both for v8.21
and this effective revert.
* cfg.mk (old_NEWS_hash): Adjust for originally omitted v8.21 entry.
* src/paste.c: s/delimeter/delimiter/ comment typo fix.
|
|
The device name reported for a particular mount entry
may no longer be valid if the mount point was subsequently
mounted on a different device. Therefore honor the order
of the mount list returned by the system and use the last
reported device name.
* src/df.c (filter_mount_list): When discarding the current
mount entry, ensure that a new device name is not also discarded.
* tests/df/skip-duplicates.sh: Add a test case. Also fix
a false failure in the edge case of a system with only a
single file system.
* NEWS: Mention the fix.
|
|
* init.cfg (require_root_): Adjust to use chroot, and make
`require_built_ chroot` implicit when chroot used in the test.
* po/POTFILES.in: Remove reference to setuidgid tool.
* src/.gitignore: Likewise.
* src/local.mk: Likewise.
* src/setuidgid.c: Remove.
* tests/cp/preserve-gid.sh: s/setuidgid/chroot --user/.
* tests/cp/special-bits.sh: Likewise.
* tests/id/setgid.sh: Likewise.
* tests/misc/truncate-owned-by-other.sh
* tests/mv/sticky-to-xpart.sh: Likewise.
* tests/rm/fail-2eperm.sh: Likewise.
* tests/rm/no-give-up.sh: Likewise.
* tests/touch/now-owned-by-other.sh: Likewise.
* tests/misc/chroot-fail.sh: Skip if chroot not built.
|
