| Age | Commit message (Collapse) | Author |
|---|
|
* tests/mkdir/perm: Now that this test is no longer always skipped,
make it work independently of ls: use stat, not ls, to get perm string.
* test-lib.sh (rwx_to_mode_): Use stat, not ls to get perm string
This test was run only when RUN_VERY_EXPENSIVE_TESTS=yes was set.
|
|
* tests/test-lib.sh: Redirect also to descriptor 9.
Better one-line why-skip diagnostics.
* tests/check.mk (TESTS_ENVIRONMENT): Redirect 9 to stderr.
* tests/misc/pwd-unreadable-parent: Remove redundant "skipping..." diag.
|
|
* tests/misc/sort: On Fedora 8 at least, sort -k1b,1
mishandles blanks in multibyte locales, so add test.
|
|
Running "mkdir dir; cp -rl dir dir" would create dir/dir/dir/...
rather than diagnosing the "copy-into-self" failure.
The easy fix would have been to revert this part of the change
[3ece0355 2008-11-09 cp: use far less memory in some cases]
that introduced the bug:
- remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
+ if (!x->hard_link)
+ remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
However, that would have induced the failure of the new cp/link-heap
test, due to the added memory pressure of recording 10k dev/ino pairs.
And besides, I liked that improvement and wanted to keep it.
Now that it's obvious recording the just-created-directory dev/ino
needn't depend on the setting of hard_link, I realized it is necessary
to record the pair only for the first directory created for each
source command-line argument.
I made that change, then noticed the new test, cp -rl a d d, would pass
when run once, yet output the into-self diagnostic twice. Also note
the side effect: it creates d/a and d/d. However, running that same
command a second time, now with the modified directory, would fail.
That turned out to be due to the fact that although the first into-self
failure was detected in copy_dir, that function would continue copying
other entries regardless -- and that would make it fail (eventually)
with the unwanted recursion.
* src/copy.c (copy_internal): This function needed an indicator of
whether, for a give command line argument, it had already created its
first directory. If so, no more need to record dev/ino pairs. If this
is the first, then do record its pair. Hence, the new parameter.
(copy_dir, copy): Update callers.
(copy_dir): Upon any into-self failure, break out of the loop.
* tests/cp/into-self: Test for the above.
Reported by Mikael Magnusson.
|
|
* tests/misc/stty-row-col: Don't hang when run in background
at least on Solaris 10 and OpenBSD.
|
|
* src/sort.c: When no specific number of chars to skip
is specified for the end field, always skip the whole field.
Also never include leading spaces from next field.
* tests/misc/sort: Add 2 new tests for these cases.
* NEWS: Mention this bug fix.
* THANKS: Add bug reporter.
Reported by Davide Canova.
|
|
* tests/dd/skip-seek-past-file: Just check for
the non system specific part of the error strings.
This was causing an erroneous failure on NetBSD 1.6 at least.
|
|
* tests/ls/color-clear-to-eol: Use \33, not \e for ascii ESC.
This test failed when using the built-in printf of /bin/sh from
NetBSD 1.6.
|
|
Revert "tests: skip newly-modified tests unconditionally..."
This reverts commit 773a88d33f68e50a2919c8a8310c646a7e5fabc2.
* tests/misc/stty: Don't skip.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Likewise.
|
|
* tests/install/install-C: Use setgid-check.
|
|
* tests/misc/stty-invalid: Skip.
* tests/misc/stty: Likewise.
* tests/mv/i-3: Likewise.
|
|
Running "make check &" would hang due to SIGTTOU and SIGTTIN signals.
* tests/misc/stty: Ignore SIGTTOU.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Ignore SIGTTIN.
|
|
* HACKING: Add copyright notice.
* tests/test-lib.sh: Likewise.
|
|
* copy.c (copy_reg): Reduce SELinux context diagnostics for 'cp -a'.
(copy_internal): Likewise
* copy.h (cp_options): Add boolean reduce_diagnostics.
* cp.c (usage): Say that --archive (-a) behaves like -dR --preserve=all.
(cp_option_init): Initialize added reduce_diagnostics.
(main): Add reduce_diagnostics for the -a option, and preserve SELinux
context, if possible.
* mv.c (cp_options_init): Initialize new cp_options booleans.
* install.c (cp_option_init): Likewise.
* NEWS: Mention those behaviour changes.
* doc/coreutils.texi: Document --preserve=context, document that
diagnostics are not shown for failures of non-mandatory attributes
(just SELinux at the moment).
* tests/cp/cp-a-selinux: Check not only failures, but succesful use
of preserving SELinux context in cp.
|
|
* NEWS: Add 2009 to copyright.
* README: Likewise.
* README-hacking: Likewise.
* TODO: Likewise.
* doc/Makefile.am: Likewise.
* m4/prereq.m4: Likewise.
* src/nl.c: Likewise.
* src/seq.c: Likewise.
* tests/cp/cp-i: Likewise.
* tests/install/install-C: Likewise.
* tests/install/install-C-root: Likewise.
* tests/install/install-C-selinux: Likewise.
* tests/misc/seq: Likewise.
* tests/mv/mv-n: Likewise.
|
|
* src/install.c (have_same_content): New function to compare files
content.
(extra_mode): New function checking for non-permission bits in mode.
(need_copy): New function to check if copy is necessary.
(main): Handle new option --compare (-C).
(copy_file): Skip file copying if not necessary.
(usage): Show new option --compare (-C) in --help.
* tests/install/install-C: Basic tests for install --compare (-C).
* tests/install/install-C-root: Tests requiring root privileges.
* tests/install/install-C-selinux: Tests requiring SELinux.
* tests/Makefile.am: Add new tests for install --compare (-C).
* doc/coreutils.texi: Document new install option --compare (-C).
* NEWS: Mention the change.
|
|
Issue reported by Samuel Hapák.
<http://lists.gnu.org/archive/html/bug-coreutils/2009-02/msg00139.html>
* src/seq.c: Account for '.' added to "last" number.
* tests/misc/seq: Add corresponding test.
* NEWS: Mention the fix.
|
|
This change addresses a relatively unusual case: ls --color, with
a highlighted name being printed initially in the last row of a
terminal emulator (possibly followed by other lines of output) such
that it is wrapped onto the following line, as the terminal emulator
scrolls the output. That would cause the entire following line to
be highlighted, even if the name happened to use only one position.
The least-invasive patch would have made colorized output larger for
all uses. The approach taken below is more invasive, but limits the
increase in overhead to only those lines that are expected to wrap.
* src/ls.c (enum indicator_no): Add C_CLR_TO_EOL.
(indicator_name): Add "cl".
(color_indicator): Add default escape codes for "cl".
(print_long_format): Propagate width to print_name_with_quoting.
(print_name_with_quoting): Print new C_CLR_TO_EOL string if needed.
Return the width of what we're printing.
(print_file_name_and_frills): Propagate width.
(print_type_indicator): Return bool (aka width).
(print_many_per_line): Pass column position to print_* function.
(print_current_files): Likewise.
(print_horizontal): Likewise.
(print_with_commas): Likewise.
* src/dircolors.c (slack_codes): Add "CLRTOEOL".
(ls_codes): Add "cl".
* tests/ls/color-clear-to-eol: New file. Test for this fix.
* tests/Makefile.am (TESTS): Add ls/color-clear-to-eol.
* THANKS: Update.
Reported by Alexander V. Lukyanov. See thread for details:
http://thread.gmane.org/gmane.linux.kernel/740021/focus=14824
Thanks to Jan Engelhardt for helping me reproduce the problem.
Demonstrate with this in an 80-column xterm:
seq 200 # to start in the "bottom" row
touch zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.foo
env LS_COLORS='*.foo=0;31;42' ls -og --color=always
Before the fix, you'd see something like this:
(where the file name is printed in red on a green background,
and each "=" denotes a space on a green background)
...
-rw-r--r-- 1 0 Feb 5 11:31 zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz\
zzzzzzzzzzzzzz.foo===================================================
After the patch, the trailing green spaces are gone:
-rw-r--r-- 1 0 Feb 5 11:31 zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz\
zzzzzzzzzzzzzz.foo
|
|
|
|
* tests/test-lib.sh (require_controlling_input_terminal_):
Check stdout, not stdin.
|
|
* tests/dd/skip-seek-past-file: I had previously commented that
on some systems lseek(> max file size) may succeed, but left
the possibility of failure in that case, so that I could determine
specific systems to put in the comments for both failure modes.
|
|
* src/dd.c: Add 2009 to list of copyright years.
* tests/dd/seek-skip-past-file: Likewise.
* tests/dd/seek-skip-past-dev: Likewise.
* m4/xattr.m4: Likewise.
* src/copy.h: Likewise.
|
|
This patch was originally written by Andreas Grünbacher, nowadays
available at
http://www.suse.de/~agruen/coreutils/5.91/coreutils-xattr.diff
* bootstrap.conf: Add gnulib module verror.
* po/POTFILES.in: Add lib/verror.c.
* m4/xattr.m4: Check for libattr availability, new configure option
--disable-xattr.
* m4/prereq.m4: Require gl_FUNC_XATTR.
* src/Makefile.am: Link cp, mv and ginstall with libattr.
* src/copy.h: Add preserve_xattr and require_preserve_xattr to
cp_options.
* src/copy.c (copy_attr_error): New function to handle errors during
xattr copying.
(copy_attr_quote): New function to quote file name in error messages
printed by libattr.
(copy_attr_free): Empty function requested by libattr to free quoted
string.
(copy_attr_by_fd): New fd-oriented function to copy xattr.
(copy_attr_by_name): New name-oriented function to copy xattr.
(copy_reg, copy_internal): Call copy_extended_attributes function.
* src/cp.c (usage): Mention new --preserve=xattr option.
(decode_preserve_arg): Handle new --preserve=xattr option.
* src/mv.c: Always attempt to preserve xattr.
* src/install.c: Never attempt to preserve xattr.
* tests/misc/xattr: New test for xattr support in cp, mv and install.
* tests/Makefile.am: Add the new test to list.
* doc/coreutils.texi: Mention xattr support, new --preserve=xattr
option.
* NEWS: Mention the change.
|
|
* tests/misc/shred-passes: Set the $fail variable correctly.
The issue was noticed by Jim Meyering.
|
|
* tests/Makefile.am: add new test
* tests/misc/shred-passes: Verify the operations shred
does by default to overwrite and remove a zero length file.
|
|
Following are the before and after operations for seekable files,
for the various erroneous offsets handled by this patch:
skip beyond end of file
before: immediately exit(0);
after : immediately printf("cannot skip to specified offset"); exit(0);
skip > max file size
before: read whole file and exit(0);
after : immediately printf("cannot skip: Invalid argument"); exit(1);
seek > max file size
before: immediately printf("truncate error: EFBIG"); exit(1);
after : immediately printf("truncate error: EFBIG"); exit(1);
skip > OFF_T_MAX
before: read whole device/file and exit(0);
after : immediately printf("cannot skip:"); exit(1);
seek > OFF_T_MAX
before: immediately printf("truncate error: offset too large"); exit(1);
after : immediately printf("truncate error: offset too large"); exit(1);
skip > device size
before: read whole device and exit(0);
after : immediately printf("cannot skip: Invalid argument"); exit(1);
seek > device size
before: read whole device and printf("write error: ENOSPC"); exit(1);
after : immediately printf("cannot seek: Invalid argument"); exit(1);
* NEWS: Summarize this change in behavior.
* src/dd.c (skip): Add error checking for large seek/skip offsets on
seekable files, rather than deferring to using read() to advance offset.
(dd_copy): Print a warning if skip past EOF, as per FIXME comment.
* test/Makefile.am: Add 2 new tests.
* tests/dd/seek-skip-past-file: Add tests for first 3 cases above.
* tests/dd/seek-skip-past-dev: Add root only test for last case above.
|
|
* tests/tail-2/infloop-1: Add a comment to that effect.
|
|
* src/cp.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* src/mv.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* doc/coreutils.texi: Document new cp/mv option -n.
* tests/cp/cp-i: Add tests for -f, -i and -n options.
* tests/mv/mv-n: New test for mv -n.
* tests/Makefile.am: Add test mv/mv-n to the list.
* NEWS: Mention the change.
|
|
* tests/Coreutils.pm: Add function to make limits available
* tests/test-lib.sh: ditto
* tests/misc/join: Check for both SIZE_OFLOW and UINTMAX_OFLOW
rather than using arbitrary 2^128
* tests/misc/sort: ditto
* tests/misc/uniq: ditto
* tests/misc/printf: Check for both INT_OFLOW and INT_UFLOW
rather than using arbitrary -2^31
* tests/misc/seq-long-double: Check for INTMAX_OFLOW
rather than using arbitrary 2^63
* tests/misc/split-fail: Check --lines --bytes and --line-bytes
options limits on all platforms. Note getlimits obviates the
need to use expr to check if 32 bit integers are supported,
which I think was invalid anyway as expr now supports bignum?
* tests/misc/test: Check for UINTMAX_OFLOW rather than
using arbitrary 2^64 and 2^128. Check for INTMAX_UFLOW
rather than using arbitrary -2^64
* tests/misc/timeout-parameters: Check for UINT_OFLOW
rather than using arbitrary 2^32
* tests/misc/truncate-overflow: Don't depend on truncate
to determine if we're on a 32 or 64 bit platform and
instead use the various OFF_T limits
* tests/misc/sort-merge: Check for UINTMAX_OFLOW
rather than using arbitrary 2^64+1
* tests/misc/unexpand: ditto
|
|
* tests/misc/ls-misc: Factor out uses of "\e[0m".
|
|
* doc/coreutils.texi: Likewise.
* tests/sample-test: Likewise.
|
|
* tests/chmod/silent: New file, to test all three programs.
* tests/Makefile.am (TESTS): Add chmod/silent.
* NEWS (Bug fixes): Mention this.
The bug was introduced in 96a5d2ce6a53d96cb667af78f13e56fadcdb91e6.
|
|
* src/cp.c (reply_args, reply_vals): Remove globals.
[REPLY_OPTION]: Remove enum.
(long_opts) ["reply"]: Remove initializer.
(main): Remove case stmt.
* src/mv.c: Likewise.
Don't include "argmatch.h". No longer used.
* NEWS (Changes in behavior): Mention this.
* tests/Makefile.am (TESTS): Remove mv/reply-no.
* tests/mv/reply-no: Remove file.
* tests/mv/i-link-no: Update, now that --reply= is gone.
|
|
* tests/dd/reblock: Change the IPC mechanism to the dd process
under test, from pipes to fifos. Also change the delay
between data writes to 0.2s for both tests.
This should increase the chance that the dd process
will read the data chunks separately.
|
|
* tests/df/total-verify: Skip the test if df fails.
|
|
* tests/Makefile.am (TESTS): Move cp/link-heap nearer the start of the
list, so that its termination doesn't delay a parallel "make check".
|
|
* tests/cp/link-heap: Raise virtual memory limit from 10,000
to 14,000, to avoid failure on Debian/unstable (libc6 2.7-16).
|
|
* tests/dd/reblock: Sleep longer to avoid a race condition.
Reported by Bob Proulx.
|
|
* tests/dd/reblock: New file. Test for the required functionality.
Based on an example and discussion from this thread:
http://lists.gnu.org/archive/html/bug-coreutils/2008-11/msg00153.html
* tests/Makefile.am (TESTS): Add dd/reblock.
|
|
cp --link was "remembering" many name,dev,inode triples unnecessarily.
cp was doing the same, even without --link, for every directory in the
source hierarchy, while it can do its job with entries merely for the
command-line arguments. Prompted by a report from Patrick Shoenfeld.
Details <http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/15081>.
* src/copy.c (copy_internal): Refrain from remembering
name,dev,inode for most files, when invoked via cp --link.
Record an infloop-avoidance triple for each directory specified
on the command line, not for each directory in the source tree.
Don't record a dir-triple when x->hard_link is set.
* NEWS (Buf fixes): Mention it.
* tests/cp/link-heap: New file. Test for cp's lowered memory usage.
* tests/Makefile.am (TESTS): Add link-heap.
|
|
* tests/cp/link-preserve: Add a case and comments.
|
|
* tests/ls/no-cap: Remove debugging "tee".
|
|
* tests/misc/printf-surprise: Disable MALLOC_PERTURB_, so that "make
check" no longer provokes a segfault from printf(1). Before, that
would be detected as a known problem and cause the test to be skipped.
Adjust the test so that a segfault once again results in test failure.
|
|
* tests/df/total: Remove file.
* tests/Makefile.am (TESTS): Remove df/total.
It is subsumed by df/total-verify.
|
|
|
|
* tests/df/total-verify: Skip upon _df_ failure, not tee failure.
Reported by Ondřej Vašík. Details in
<http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/15028>.
|
|
* src/ls.c (print_color_indicator): Colorize hard linked files.
* src/dircolors.c: Add color for hard link.
* src/dircolors.hin: Add color for hard link.
* tests/ls/hardlink: Test for ls - colorize hard linked files.
* tests/Makefile.am (TESTS): Add ls/hardlink.
* NEWS: Mention the change.
|
|
* tests/ls/stat-failed: Let stderr be recorded, to ease debugging.
|
|
* tests/misc/seq-long-double: New file. Test for today's bug fix.
* tests/check.mk (TESTS_ENVIRONMENT): Export CC definition.
* tests/Makefile.am (TESTS): Add misc/seq-long-double.
* NEWS (Bug fixes): Mention it.
|
|
* src/seq.c (validate_format): Remove. Migrate its checks into...
(long_double_format): Report an error and exit if an error is found,
instead of returning NULL. All callers changed.
Use a more-consistent format for diagnostics.
* tests/misc/seq: Adjust to the more-consistent format for diagnostics.
|
