summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2012-01-09tests: adjust \`...' quoting to '...' to adapt to latest gnulibJim Meyering
Run this: git grep -l "\\\\\`[^']*'" tests \ |xargs perl -pi -e 's/\\\`(.*?'\'')/'\''$1/g
2012-01-07maint: update quoting of "Try `prog --help'" to "Try 'prog --help'"Jim Meyering
Automatically adjust both the source (now in only one place) and all tests that expect the resulting output via this: git grep -l 'Try.*--help' src/system.h tests \ | xargs perl -pi -e 's/Try \\?`(\S+ --help)/Try '\''$1/'
2012-01-06tests: adjust quoting in expected output to match new gnulib policyJim Meyering
* tests/misc/xstrtol: Use '...' to match new quoting in most places. However, leave `9x' to match the sole comparison against output from the quote function, which still uses `...'. * tests/misc/sort-merge: Likewise, though here I had to leave `...'-quoted output to match output from four tests. * tests/pr/pr-tests: Convert a single `...' to '...'. * gnulib: Update submodule to latest.
2012-01-05tests: avoid stty icanon issues on some platformsPádraig Brady
* tests/misc/stty: Exclude 'icanon' for the list to check, as it's problematic on ppc*|sparc* platforms.
2012-01-05tests: avoid ulimit issue on bash 3.2 on OS XPádraig Brady
* tests/misc/sort-continue: Perform the glob before the ulimit, as it was seen to make the glob fail on bash 3.2 on Mac OS X 10.6.8 at least.
2012-01-05tests: avoid a false positive due to overflow on Linux/HPPAPádraig Brady
* tests/misc/timeout-parameters: Verify that the timer doesn't fire immediately in the problematic range, and avoid overflow checks in that case. * man/timeout.x: Mention the possible bug. Reported by Bruno Haible
2012-01-05tests: adjust setfacl usage to accommodate Solaris 10Jim Meyering
* cfg.mk (sc_prohibit_short_facl_mode_spec): New rule. * tests/cp/acl: Extend setfacl mode spec to have length 3. * tests/ls/slink-acl: Likewise. * tests/mv/acl: Likewise. Report and analysis by Bruno Haible.
2012-01-05split: avoid failure due to leftover 'errno' valueBruno Haible
* src/split.c (lines_chunk_split): Fix logic bug that led to unwarranted failure of "split -n l/2 /dev/zero" on NetBSD 5.1. The same would happen when splitting a growing file, where open/lseek-end gives one size, but by the time we read, there is more data available. (bytes_chunk_extract): Likewise. * NEWS (Bug fixes): Mention this. * tests/split/l-chunk: The latter case was not exercised. Add code to do that. Bug introduced with the chunk-selecting feature in v8.7-25-gbe10739. Co-authored-by: Jim Meyering <meyering@redhat.com>
2012-01-03tests: adjust realpath test to avoid "make distcheck" failureJim Meyering
* tests/misc/realpath: Quote lhs of test ... = ..., so that when $PWD contains a space (like it does via "make distcheck"), the test does not fail
2012-01-03realpath: a new program to print the resolved pathPádraig Brady
This program is compatible with other realpath(1) implementations, and also incorporates relpath like support, through the --relative options. The relpath support was suggested by Peng Yu, who also provided an initial implemenation of that functionality. * AUTHORS: Add my name. * NEWS: Mention the new command. * README: Likewise. * doc/coreutils.texi (realpath invocation): Add realpath info. * man/Makefile.am (realpath.1): Add dependency. * man/realpath.x: New template. * man/.gitignore: Ignore generated man page. * po/POTFILES.in: Add src/realpath.c. * src/.gitignore: Exclude realpath. * src/Makefile.am (EXTRA_PROGRAMS): Add realpath. * src/realpath.c: New file. * scripts/git-hooks/commit-msg: Add realpath to the list of prefixes. * tests/Makefile.am (TESTS): Add misc/realpath. * tests/misc/realpath: New file.
2012-01-01tests: also print chmod's --versionJim Meyering
* tests/rm/many-dir-entries-vs-OOM: This test also exercises chmod.
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2012-01-01tests: change copyright year from 2011 to 2012 in sample-testJim Meyering
This file is special. We don't want to use a range, but merely the current year number. * tests/sample-test: s/2011/2012/
2011-12-31tests: fix a missing-dependency problemJim Meyering
* tests/check.mk (.built-programs): Depend on src/Makefile.am, so that when we add a program, this file is updated, and the new program is tested via misc/help-version. Spotted by Pádraig Brady.
2011-12-28tests: also unset _STDBUF_E, _STDBUF_I and _STDBUF_OJim Meyering
* tests/envvar-check (vars): Add these to the list of envvars we ignore: _STDBUF_E, _STDBUF_I, _STDBUF_O, used by libstdbuf.
2011-12-14du: -x should not count files in other file systemsPaul Eggert
This fixes Bug#10293, which I guess was introduced in commit 95c948b06a dated 2003-10-02. * NEWS: Document fix. * src/du.c (process_file): Don't count files in different file systems if -x is given. * tests/du/one-file-system: Test for this bug.
2011-12-12ls: give a more useful diagnostic for a bogus --time-style argJim Meyering
* src/ls.c (decode_switches): Replace our use of XARGMATCH with open-coded version so that we can give a better diagnostic. * tests/ls/time-style-diag: New file. * tests/Makefile.am (TESTS): Add it. Reported by Dan Jacobson in http://bugs.gnu.org/10253 with suggestions from Eric Blake and Paul Eggert.
2011-12-01tests: adjust PATH to generally include /sbin and /usr/sbinBernhard Voelker
Commit 5eeaca94 added /sbin to the PATH for tests using mkfs. For other tests, e.g. tests/cp-fiemap-perf using filefrag, we need /usr/sbin also. Add both directories generally for the tests, "since many of us always augment our PATH with all of the sbin paths all of the time anyway" (Bob in http://lists.gnu.org/archive/html/coreutils/2011-11/msg00107.html). The previous commit is hereby obsolete. * tests/init.cfg (sanitize_path_): Add /sbin and /usr/sbin to PATH unless already included. Needed for tests using admin tools like mkfs and filefrag on systems where the user's environment does not have these directories in the PATH. * tests/init.cfg (require_mkfs_PATH_): Remove obsolete function. * tests/cp/cp-a-selinux: Remove require_mkfs_PATH_ call. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/sparse-fiemap: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/rm/read-only: Likewise.
2011-11-29build: update gnulib for syntax-check improvementEric Blake
Commit 5b3e538 proved useful enough to migrate to gnulib after enhancing it to be more generic, which in turn pointed out that commit a2c811db missed an offender. * gnulib: Update to latest. * cfg.mk (sc_prohibit_reversed_compare_failure): Delete, now that gnulib provides it. * tests/ls/dangle: Fix last offender.
2011-11-23build: update gnulib and tests/init.shJim Meyering
* gnulib: Update. * tests/init.sh: Update from gnulib.
2011-11-22tests: use "compare exp out", not "compare out exp"Jim Meyering
Likewise, when an empty file is expected, use "compare /dev/null out", not "compare out /dev/null". I.e., specify the expected/desired contents via the first file name. Prompted by a suggestion from Bruno Haible in http://thread.gmane.org/gmane.comp.gnu.grep.bugs/4020/focus=29154 Run these commands: git grep -l -E 'compare [^ ]+ exp' \ |xargs perl -pi -e 's/(compare) (\S+) (exp\S*)/$1 $3 $2/' git grep -l -E 'compare [^ ]+ /dev/null' \ |xargs perl -pi -e 's/(compare) (\S+) (\/dev\/null)/$1 $3 $2/' * tests/chgrp/no-x: As above. * tests/chmod/no-x: Likewise. * tests/chmod/silent: Likewise. * tests/chmod/thru-dangling: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/preserve-root: Likewise. * tests/cp/abuse: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-a-selinux: Likewise. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/proc-zero-len: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/thru-dangling: Likewise. * tests/dd/reblock: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/bigtime: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/files0-from-dir: Likewise. * tests/du/hard-link: Likewise. * tests/du/inacc-dest: Likewise. * tests/du/inacc-dir: Likewise. * tests/du/long-sloop: Likewise. * tests/du/max-depth: Likewise. * tests/du/move-dir-while-traversing: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/one-file-system: Likewise. * tests/du/slash: Likewise. * tests/du/trailing-slash: Likewise. * tests/install/strip-program: Likewise. * tests/ln/hard-backup: Likewise. * tests/ls/block-size: Likewise. * tests/ls/color-clear-to-eol: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/color-norm: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-free-symlinks: Likewise. * tests/ls/x-option: Likewise. * tests/misc/arch: Likewise. * tests/misc/cat-buf: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/chcon: Likewise. * tests/misc/csplit: Likewise. * tests/misc/df-P: Likewise. * tests/misc/fmt-long-line: Likewise. * tests/misc/groups-dash: Likewise. * tests/misc/groups-version: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/nl: Likewise. * tests/misc/od-N: Likewise. * tests/misc/od-multiple-t: Likewise. * tests/misc/od-x8: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-option: Likewise. * tests/misc/readlink-fp-loop: Likewise. * tests/misc/runcon-no-reorder: Likewise. * tests/misc/seq-long-double: Likewise. * tests/misc/sort-NaN-infloop: Likewise. * tests/misc/sort-benchmark-random: Likewise. * tests/misc/sort-debug-keys: Likewise. * tests/misc/sort-float: Likewise. * tests/misc/sort-merge-fdlimit: Likewise. * tests/misc/sort-unique-segv: Likewise. * tests/misc/stat-hyphen: Likewise. * tests/misc/stat-slash: Likewise. * tests/misc/stdbuf: Likewise. * tests/misc/sum-sysv: Likewise. * tests/misc/tac-2-nonseekable: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/tr-case-class: Likewise. * tests/misc/truncate-fail-diag: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/selinux: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/force: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self: Likewise. * tests/mv/into-self-2: Likewise. * tests/mv/into-self-3: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/mv/trailing-slash: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/fail-eacces: Likewise. * tests/rm/i-never: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/isatty: Likewise. * tests/rm/one-file-system: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm5: Likewise. * tests/rm/unread2: Likewise. * tests/rm/v-slash: Likewise. * tests/sample-test: Likewise. * tests/split/b-chunk: Likewise. * tests/split/fail: Likewise. * tests/split/l-chunk: Likewise. * tests/split/lines: Likewise. * tests/split/r-chunk: Likewise. * tests/split/suffix-length: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/follow-name: Likewise. * tests/tail-2/follow-stdin: Likewise. * tests/tail-2/pipe-f: Likewise. * tests/tail-2/pipe-f2: Likewise. * tests/tail-2/start-middle: Likewise. * tests/touch/60-seconds: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/relative: Likewise.
2011-11-22tests: use compare, not "diff", in a few stray testsJim Meyering
* tests/install/basic-1: Use compare, not diff. * tests/mkdir/p-v: Likewise. * tests/mv/part-fail: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/touch/not-owner: Likewise.
2011-11-14id: fail when getuid, getgid, etc. fail, e.g., on GNU/HurdLudovic Courtès
POSIX-conforming getuid, geteuid, etc. functions cannot fail, but on GNU/Hurd systems and some others, they may. * src/id.c (main) [__GNU__]: Detect and diagnose any such failure. * tests/id/gnu-zero-uids: New file. * tests/Makefile.am (TESTS): Add it to the list. * tests/init.cfg (require_gnu_): New function.
2011-11-13tests: avoid rare fp failure in du/move-dir-while-traversingNix
* tests/du/move-dir-while-traversing: Boost the mkdir iteration count yet again.
2011-11-12* tests/misc/sort-continue: Port to Fedora 15.Paul Eggert
Redirect with the shell command, not in a separate 'exec'. Without this patch, Fedora 15 x86-64 /bin/sh (i.e., Bash 4.2.10) complained about running out of file descriptors in the shell.
2011-11-12* tests/ls/block-size: Make it executable.Paul Eggert
2011-11-11ls: -k no longer affects -l's file sizesPaul Eggert
This fixes an incompatibility with POSIX 2008 and with BSD. Problem reported by Abdallah Clark (Bug#9939) via Alan Curry (Bug#10016). * NEWS: Document this. * doc/coreutils.texi (General output formatting): Document the new -k behavior, and --kibibytes. * src/ls.c (file_human_output_opts): New static var. (long_options, usage): Add --kibibytes. (decode_switches, gobble_file, print_long_format): Implement the new -k behavior. * tests/ls/block-size: New file. * tests/Makefile.am (TESTS): Add it.
2011-11-03tests: avoid signal issues in timeout-groupPádraig Brady
These issues were seen on an OpenSuse 10.3 system (kernel 2.6.22.5 x86_64, glibc 2.6.1-18, bash updated to 4.2), and also on a 64 bit SLES system with a 2.6.16 kernel. Both systems had 2 CPUs. There were two issues seen. 1. Occasionally the timeout.cmd shell script would block SIGINT until the sleep command exited. 2. Much less frequently the signal handler in the timeout command itself was ignored, causing SIGALRM to kill the process. * tests/misc/timeout-group: Detect the above two cases, and skip rather than fail. Note only issue 2. causes a failure unless skipped, but we skip for case 1. also, for diagnostic purposes.
2011-11-03tests: fix a race in timeout-groupPádraig Brady
This could cause a false failure, or even an infinite loop in rare circumstances. * tests/misc/timeout-group: Increase the timeouts passed to the timeout command, so that they're effectively not used. Instead the command termination is triggered by the kill commands when everything is in the correct state. Reported by Bernhard Voelker.
2011-10-30tests: doc: fix stale comment in new rm/many-dir-entries-vs-OOMJim Meyering
2011-10-29tests: don't make tail's pipe-f2 test take the full 10 secondsJim Meyering
* tests/tail-2/pipe-f2: Don't always wait 10 seconds. Before, this test would always wait 10 seconds. Now, it stops early when it detects that tail -f has written output. BTW, the race condition that prompted changing the timeout from 1 second to 10 was that tail -f could be killed by the timeout before producing any output.
2011-10-19maint: tac: prefer "failed to" diagnostic over "cannot"Jim Meyering
* src/tac.c: Change wording in diagnostic: "failed to open" seems clearer than "cannot open".
2011-10-17tac: don't misbehave with multiple non-seekable inputsJim Meyering
* src/tac.c (copy_to_temp): Do not reuse the template buffer. Instead, scribble only on a freshly-xstrdup'd copy each time. Free that buffer both here, upon failure, and ... (tac_nonseekable): ...free the buffer in caller, upon success. * tests/misc/tac-2-nonseekable: New file. * tests/Makefile.am (TESTS): Add it. * NEWS (Bug fixes): Mention it. Reported by Ambrose Feinstein in http://debbugs.gnu.org/9762.
2011-10-17maint: speed up make check (vc_exe_in_TESTS)Pádraig Brady
* tests/check.mk (vc_exe_in_TESTS): The main change is to not start a sed process for each file under tests/, which was taking around 2.5s on a 2.1GHz i3-2310M. Also adjust the rule to no longer use temporary files.
2011-10-12tests: avoid a false failure on systems without inotifyPádraig Brady
* tests/tail-2/follow-name: Exclude the inotify warning from the comparison. Reported by Bruno Haible.
2011-10-09tests: skip rather than failing when perl is not availableJim Meyering
* tests/df/total-verify: Use require_perl_, so that this test is skipped when perl is not available. * tests/rm/deep-2: Likewise, and fix wording in a comment. Reported by Bruno Haible.
2011-10-08tests: avoid tail-2/F-vs-missing failure on NFSJim Meyering
* tests/tail-2/F-vs-missing: This test would fail about 80% of the time on linux/powerpc when run in an NFS-mounted directory. Reported by Bruno Haible in http://thread.gmane.org/gmane.comp.gnu.coreutils.general/1726/focus=1727
2011-10-08tests: avoid ls/slink-acl test failure on Solaris 10Jim Meyering
* tests/ls/slink-acl: Use setfacl's "-m user::r" option rather than less-portable "-m m::r". The latter did not work with Solaris 10's version of setfacl. Reported by Bruno Haible in http://thread.gmane.org/gmane.comp.gnu.coreutils.general/1726/focus=1737
2011-10-08tests: avoid false-positive failures on linux/sparc64Jim Meyering
* tests/init.cfg (require_strace_): Detect a version of strace that fails on linux/sparc64 for 64-bit executables. Report and most of the suggested fix from Bruno Haible: http://thread.gmane.org/gmane.comp.gnu.coreutils.general/1726/focus=1728
2011-10-05tests: add a test to exercise today's ls-lL-vs-ACL bugJim Meyering
* tests/ls/slink-acl: New file. * tests/Makefile.am (TESTS): Add it. * tests/init.cfg (require_setfacl_): New function. * gnulib: Update to latest, for file-has-acl changes. * NEWS (Bug fixes): Mention it. See http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/28538. This ":>k; setfacl -m m::r k; ln -s k s; ls -Log s" should print e.g., -rw-r-----+ 1 0 Oct 5 19:22 s With the ls from coreutils-8.13, it would print this (with "." or nothing in place of the "+"): -rw-r-----. 1 0 Oct 5 19:22 s
2011-10-01ls: fix output of dangling symlinks colored as targetPádraig Brady
This is related to commit b7f2b51c, 2010-01-01, "ls: fix color of broken symlinks colored as target" which didn't handle the --dereference case. The simplest way to reproduce the resultant erroneous "argetm" is as follows: $ ln -s /no-such dangle $ env LS_COLORS=ln=target ls --dereference --color ls: cannot access dangle: No such file or directory argetmdangle This is also an issue with the `tree` utility, reported here: http://bugs.debian.org/586765 * src/ls.c (print_color_indicator): Move the handling of 'ln=target' in $LS_COLORS (color_symlink_as_referent == true) to a higher scope, to handle all cases where type == C_LINK. * tests/misc/ls-misc: Add a test case for the specific issue, and 2 further test cases to verify other code paths in this area. Reported by Jason Glassey.
2011-09-27sort: avoid a NaN-induced infloopJim Meyering
These commands would fail to terminate: yes -- -nan | head -156903 | sort -g > /dev/null echo nan > F; sort -m -g F F That can happen with any strtold implementation that includes uninitialized data in its return value. The problem arises in the mergefps function when bubble-sorting the two or more lines, each from one of the input streams being merged: compare(a,b) returns 64, yet compare(b,a) also returns a positive value. With a broken comparison function like that, the bubble sort never terminates. Why do the long-double bit strings corresponding to two identical "nan" strings not compare equal? Because some parts of the result are uninitialized and thus depend on the state of the stack. For more details, see http://bugs.gnu.org/9612. * src/sort.c (nan_compare): New function. (general_numcompare): Use it rather than bare memcmp. Reported by Aaron Denney in http://bugs.debian.org/642557. * NEWS (Bug fixes): Mention it. * tests/misc/sort-NaN-infloop: New file. * tests/Makefile.am (TESTS): Add it.
2011-09-24tests: mention new check-expensive/check-very-expensive in test logsBernhard Voelker
* tests/init.cfg: (very_expensive_): Mention toplevel make target, check-very-expensive. (expensive_): Likewise for check-expensive.
2011-09-19tests: init.sh: support any non-GNU diffBruno Haible
* tests/init.sh (compare): If "diff -c" is supported but "diff -u" is not, use "diff -c". Useful on AIX 6.1, HP-UX 11.31, OSF/1 5.1, Solaris 8.
2011-09-19tests: cp-parents: don't let a failing chmod go unnoticedJim Meyering
* tests/cp/cp-parents: If somehow a chmod set-up command failed, subsequent tests would fail in a harder-to-diagnose manner.
2011-09-16md5sum: handle BSD reversed format checksumsPádraig Brady
* src/md5sum.c (split_3): Detect and handle BSD reversed format checksums. * tests/misc/md5sum-bsd: Add a new test. * tests/Makefile.am: Reference new test. * NEWS: Mention the improvement Suggested by Rimas Kudelis.
2011-09-08doc: fix typo in test script commentJim Meyering
* tests/d_type-check: Fix typo in comment.
2011-09-07tests: adjust PATH to include /sbin for mkfs-using testsBernhard Voelker
* tests/init.cfg (require_mkfs_PATH_): New function to test whether mkfs is in PATH, otherwise adding /sbin to PATH. Needed for distributions (OpenSuSE, Solaris) in which sudo does not include /sbin in PATH. * tests/cp/cp-a-selinux: Use require_mkfs_PATH_. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/sparse-fiemap: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/rm/read-only: Likewise.
2011-09-02tests: init.sh: work also with any non-GNU diff that supports -uBruno Haible
* tests/init.sh: Relax check for diff -u support. Rather than checking for GNU diff via --version, simply check for support for -u itself. Useful at least on OpenBSD 4.9.
2011-09-02tests: remove require-perl script; use function insteadJim Meyering
* tests/require-perl: Remove file. * tests/Makefile.am (EXTRA_DIST): Remove it from this list. * tests/init.cfg (require_perl_): New function. * tests/misc/pwd-long: Use the new function, not the file. * tests/ls/nameless-uid: Likewise. * tests/misc/sum-sysv: Likewise.
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-29 12:03:13 +0000