summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2010-11-17tests: substitute the single-program $VERBOSE/--version usesJim Meyering
Automatically make all of the changes like this: -test "$VERBOSE" = yes && chgrp --version +print_ver_ chgrp git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \ 's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
2010-11-17tests: factor out VERBOSE-only --version-printing codeJim Meyering
* tests/init.cfg (print_ver_): New function.
2010-11-17tests: remove test-lib.sh; now all tests use gnulib's init.shJim Meyering
* tests/test-lib.sh: Remove file. No longer used. * tests/Makefile.am (EXTRA_DIST): Remove it here, too. * tests/sample-test: Correct a comment.
2010-11-17tests: convert remaining uses of test-lib.sh to init.shJim Meyering
RHS='. "\${srcdir=.}/init.sh"; path_prepend_ ../src' git grep -l test-lib.sh \ | xargs perl -pi -e 's,^\. \$srcdir/test-lib\.sh$,'"$RHS",
2010-11-17tests: convert 'if test "$VERBOSE" = yes; then' to test ... &&Jim Meyering
2010-11-17tests: convert first batch of tests from test-lib.sh to init.shJim Meyering
Initially, I did this, git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script' but that line would have been much longer than the maximum permitted by coreutils' commit hook, and wasn't readable besides, so here's a more readable version: lhs=$(printf '%s\\n' \ 'if test "$VERBOSE" = yes; then' \ ' set -x' \ ' touch --version' \ 'fi' \ '' \ '. $srcdir/test-lib.sh' \ | sed 's/\$/\\\$/g;s/touch/(\\w+)/') rhs=$(printf '%s\\n' \ '. "${srcdir=.}/init.sh"; path_prepend_ ../src' \ 'test "$VERBOSE" = yes && FIXME --version' \ | sed 's/\$/\\\$/g;s/FIXME/\$1/') git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
2010-11-17tests: move a comment so automated conversion worksJim Meyering
2010-11-16split: fail immediately if impossible to create a large filePádraig Brady
* src/split.c (main): Error if -[bC] value > OFF_T_MAX * tests/misc/split-fail: Adjust for the new lower limits
2010-11-11csplit: do not rely on undefined behavior in printf formatsPaul Eggert
* doc/coreutils.texi (csplit invocation): Say that %d and %i are aliases for %u. * src/csplit.c (FLAG_THOUSANDS, FLAG_ALTERNATIVE): New constants. (get_format_flags): Now take char const * and int * and return size_t. It now stores info about the flags instead of merely scanning them. Also, it handles '0' correctly. Drop support for the undocumented '+' and ' ' flags since the value is unsigned. Add support for the (undocumented) "'" flag. All uses changed. (get_format_width, get_format_prec): Remove. (check_format_conv_type): Renamed from get_format_conv_type, with a different signature. It now converts the format to one that is compatible with unsigned int, and checks flags. All uses changed. (max_out): Have snprintf compute the number of bytes needed rather than attempting to do it ourselves (which doesn't work portably with outlandish formats such as %4294967296d). (check_format_conv_type, main): Check for overflow in size calculations. Don't assume size_t fits in unsigned int. * tests/misc/csplit: Check for proper handling of flags, with %0#6.3x. Coreutils 8.6 mishandles this somewhat-weird example.
2010-11-11csplit: fix a memory leak per input bufferPádraig Brady
* src/csplit.c (free_buffer): Also free the line offsets buffers (remove_line): Also free the containing structure * tests/misc/csplit-heap: A new test to trigger with leaks of this magnitude. * tests/Makefile.am: Reference the new test * NEWS: Mention the fix Reported by David Hofstee
2010-11-10tests: fix comments and --version invocation in new testJim Meyering
* tests/misc/csplit-1000: Fix comments and --version invocation.
2010-11-10csplit: avoid buffer overrun when writing more than 999 filesJim Meyering
Without this fix, seq 1000 | csplit - /./ '{*}' would write the NUL-terminated file name, xx1000, into a buffer of size 6. * src/csplit.c (main): Use properly sized file name buffer. * NEWS (Bug fixes): Mention it. * tests/misc/csplit-1000: New test to trigger the bug. * tests/Makefile.am (TESTS): Add misc/csplit-1000.
2010-11-09tests: avoid portability problem with dash vs. symlinked ttysPádraig Brady
* tests/mv/i-3: Adjust so that the symlink is resolved before redirecting to the background command, as otherwise the stdin descriptor passed to the command will fail the isatty() or ttyname() test.
2010-11-08tests: avoid portability problem with dash vs. local v=$splittable_valPádraig Brady
* tests/init.cfg (retry_delay_): Adjust awk script to print a single floating point value, rather than many.
2010-11-07tests: don't disqualify FreeBSD 8.1's /bin/sh just yet,Jim Meyering
because dash-0.5.6-2.fc14.x86_64 would also be disqualified. This reverts part of yesterday's commit 6c058b2d, "tests: avoid failure due to bug in FreeBSD 8.1's /bin/sh". Note that the offending aspect of those shells is not officially a bug, since "local" is not specified by POSIX. However, it is very unintuitive that prepending "local" to an existing, standards-compliant assignment would evoke such a fundamental change in semantics. * tests/init.sh: Remove snippet requiring sane "local" support. Upstream dash bug report: http://thread.gmane.org/gmane.comp.shells.dash/419
2010-11-06stat: do not rely on undefined behavior in printf formatsPaul Eggert
* src/stat.c (digits, printf_flags): New static vars. (make_format): New function. (out_string, out_int, out_uint, out_uint_o, out_uint_x): (out_minus_zero): Use it to avoid undefined behavior when invoking printf. (print_it): Check for invalid conversion specifications such as %..X and %1-X, which would otherwise rely on undefined behavior when invoking printf. * tests/misc/stat-nanoseconds: Check that the "I" printf flag doesn't mess up in the C locale, as it formerly did on non-GNU hosts.
2010-11-06tests: avoid failure due to bug in FreeBSD 8.1's /bin/shJim Meyering
* tests/init.sh: Arrange not to accept FreeBSD 8.1's /bin/sh, since it fails this test: /bin/sh -c 'f(){ local s=$IFS; test -n "$s"; }; f' * tests/init.cfg (sanitize_path_): Stop-gap measure to work around a bug in FreeBSD 8.1's /bin/sh. We'll un-do this change once all 300+ tests use init.sh.
2010-11-06stat: use e.g. %.3X instead of %X.%3:X for sub-second precisionPaul Eggert
* NEWS: Document this. * doc/coreutils.texi (stat invocation): Likewise. * gl/lib/fstimeprec.c, gl/lib/fstimeprec.h, gl/modules/fstimeprec: * gl/modules/fstimeprec-tests, gl/tests/test-fstimeprec.c: New files. * bootstrap.conf (gnulib_modules): Add fstimeprec. * src/stat.c: Include fstimeprec.h. Don't include xstrtol.h. (decimal_point, decimal_point_len): New static vars. (main): Initialize them. (epoch_sec, out_ns): Remove. (out_int, out_uint): Now returns whatever printf returned. (out_minus_zero, out_epoch_secs): New functions. (print_stat): Use out_epoch_sec instead of out_ns and epoch_sec. (print_stat, print_it, usage): Remove the %:X-style formats. * tests/misc/stat-nanoseconds: Set TZ=UTC0 to avoid problems with weird time zones. Use a time stamp near the Epoch so that we don't have to worry about leap seconds. Redo test cases to match new behavior. * tests/touch/60-seconds: Change %Y.%:Y to %.9Y, to adjust to new behavior.
2010-11-03stat: revert %X-%Y-%Z change; use e.g., %:X to print fractional secondsJim Meyering
This reverts part of the recent commit 9069af45, "stat: print timestamps to full resolution", which made %X, %Y, %Z print floating point numbers. We prefer to retain portability of %X, %Y and %Z uses, while still providing access to full-resolution time stamps via modified format strings. Also make the new %W consistent. * src/stat.c: Include "xstrtol.h". (print_it): Accept a new %...:[XYZ] format directive, e.g., %:X, to print the nanoseconds portion of the corresponding time. For example, %3.3:Y prints the zero-padded, truncated, milliseconds part of the time of last modification. (print_it): Update print_func signature to match. (neg_to_zero): New helper function. (epoch_time): Remove function; replace with... (epoch_sec): New function; use timetostr. (out_ns): New function. Use "09" only when no other modifier is specified. (print_statfs): Change type of "m" to unsigned int, now that it must accommodate values larger than 255. (print_stat): Likewise. Map :X to a code of 'X' + 256. Likewise for Y, Z and W. (usage): Update. * tests/touch/60-seconds: Use %Y.%:Y in place of %Y. * tests/misc/stat-nanoseconds: New file. * tests/Makefile.am (TESTS): Add it. * NEWS (Changes in behavior): Mention this. With improvements by Pádraig Brady. Thanks to Andreas Schwab for raising the issue.
2010-11-01tests: fix a false positive for 32 bit on 64 bit hostsNix
* tests/ls/stat-free-symlinks: strace currently outputs an informational message about arch difference to stdout. Therefore we need to strip that before comparison.
2010-10-27cp: make --attributes-only override --reflink completelyPádraig Brady
* doc/coreutils.texi (cp invocation): Change the description slightly so as users might not immediately discount using this option. Mention that --reflink is overridden by the other linking options and --attributes-only, and give an example where this might be useful. * src/copy.c (copy_internal): Bypass the reflink if --attributes-only is specifed. * tests/cp/reflink-perm: Ensure both --reflink modes are overridden by --attributes-only. * NEWS: Mention the change in behavior. Reported by Jim Meyering.
2010-10-26tests: mention that btrfs also causes failure of misc/ls-timeJim Meyering
* tests/misc/ls-time: Mention that this test also fails on btrfs, at least until http://bugzilla.redhat.com/591068 is addressed.
2010-10-23du: don't print junk when diagnosing out-of-range time stampsPaul Eggert
* src/du.c (show_date): Fix call to fputs with a buffer that contains some uninitialized data. * tests/Makefile.am (TESTS): Add du/big-timestamp. * tests/du/bigtime: New file, which checks for the bug.
2010-10-19tests: trigger and test for md5sum's new diagnosticsJim Meyering
* tests/misc/md5sum: Test for new diagnostics.
2010-10-19md5sum: print a summary warning for improperly formatted linesBenno Schulenberg
And remove the now-superfluous totals from the other two warnings, so the plurals will also work in other languages than English. * src/md5sum.c (digest_check): Change as above. * tests/misc/md5sum (check-quiet2): Adjust accordingly.
2010-10-17tests: sort-float: avoid spurious test failure on ppc/ppc64Jim Meyering
* tests/misc/sort-float: On systems with DBL_MIN < LDBL_MIN, this test would fail because the expected output was not sorted. Detect that case, and if needed, reverse those two values.
2010-10-14tests: work around portability and clock-skew problemsPaul Eggert
* tests/misc/ls-misc (push_ls_colors): Don't assume LS_COLORS is set. This part of the fix is by Jim Meyering. (sl-dangle2, sl-dangle3, sl-dangle4, sl-dangle5): Don't assume that newly-created files will have time stamps in the past. They might not, due to clock skew, if the file systems are remote. http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/21322/focus=21346
2010-10-12tail: fix checking of currently unavailable directoriesPádraig Brady
* src/tail.c (tail_forever_inotify): Handle the case where tail --follow=name with inotify, is not able to add a watch on a specified directory. This may happen due to inotify resource limits or if the directory is currently missing or inaccessible. In all these cases, revert to polling which will try to reopen the file later. Note inotify returns ENOSPC when it runs out of resources, and instead we report a particular error message, lest users think one of their file systems is full. (main): Document another caveat with using inotify, where we currently don't recheck directories recreated after the initial watch is setup. * tests/tail-2/F-vs-rename: Fix the endless loop triggered by the above issue. * tests/tail-2/inotify-hash-abuse: Likewise. * tests/tail-2/wait: Don't fail in the resource exhaustion case. * tests/tail-2/F-vs-missing: A new test for this failure mode which was until now just triggered on older buggy linux kernels which returned ENOSPC constantly from inotify_add_watch(). * NEWS: Mention the fix.
2010-10-07split: fix reporting of read errorsPádraig Brady
The bug was introduced with commit 23f6d41f, 19-02-2003. * src/split.c (bytes_split, lines_split, line_bytes_split): Correctly check the return from full_read(). * tests/misc/split-fail: Ensure split fails when it can't read its input. * NEWS: Mention the fix.
2010-10-04tests: refactor the stat-birthtime test to use retry_delay_Pádraig Brady
* tests/misc/stat-birthtime: This recently added test fits the pattern of requiring a delay to pass, so get it to use retry_delay_()
2010-10-01tests: output --version of program under testEric Blake
This touches all new tests added since commit b062bbd9, when init.cfg was added. Older tests still exist that could use conversion, but we can address those later. * tests/sample-test: Restore hint for --version output. * tests/misc/stat-birthtime: Include --version if verbose. * tests/misc/tr-case-class: Likewise. * tests/misc/stat-mount: Likewise. * tests/misc/sort-unique: Likewise. * tests/misc/sort-benchmark-random: Likewise. Suggested by Jim Meyering.
2010-10-01stat: print timestamps to full resolutionEric Blake
* src/stat.c (epoch_time): New function. (print_stat): Use it for %[WXYZ]. * NEWS: Document this. * tests/touch/60-seconds: Adjust test to match. * tests/misc/stat-birthtime: Likewise.
2010-10-01stat: support printing birthtimeEric Blake
* src/stat.c (print_stat): New %w and %W formats. (do_stat): Include %w in default format. (usage): Document new specifiers. * doc/coreutils.texi (stat invocation): Likewise. * NEWS: Likewise.
2010-10-01maint: update sample test templateEric Blake
* tests/sample-test: Recommend modern idiom.
2010-09-29tr: fix various issues with case conversionPádraig Brady
This valid translation spec aborted: LC_ALL=en_US.iso-8859-1 tr '[:upper:]- ' '[:lower:]_' This invalid translation spec aborted: LC_ALL=en_US.iso-8859-1 tr '[:upper:] ' '[:lower:]' This was caused by commit 6efd1046, 05-01-2008, "Avoid tr case-conversion failure in some locales" This misaligned conversion spec was allowed: LC_ALL=C tr 'A-Y[:lower:]' 'a-z[:upper:]' This was caused by commit af5d0c36, 21-10-2007, "tr: do not reject an unmatched [:lower:] or [:upper:] in SET1" This misaligned spec was allowed by extending the class: LC_ALL=C tr '[:upper:] ' '[:lower:]' * src/tr.c (validate_case_classes): A new function to check alignment of case conversion classes. Also it adjusts the length of the sets so that locales with different numbers of upper and lower case characters, don't cause issues. (string2_extend): Disallow extending the case conversion class as in the above example. That is locale dependent and most likely not what the user wants. (validate): Do the simple test for "restricted" char classes earlier, so we don't redundantly do more expensive validation. (main): Remove the case class validation, and simplify. * tests/misc/tr-case-class: A new test to test the various alignment and locale issues, associated with case conversion. * tests/misc/tr: Move case conversion tests to new tr-case-class. * tests/Makefile.am: Reference the new test. * NEWS: Mention the fixes.
2010-09-20tests: fix a printf portability issuePádraig Brady
* tests/misc/sort-debug-keys: Don't depend on printf supporting \xhh format, which isn't supported by dash for example. Also change from double quoted strings to single quoted, when we don't need any variable interpolation.
2010-09-20tests: fix an erroneous stat failure with bind mountsPádraig Brady
* tests/misc/stat-mount: Don't try to correlate the mount points output by df and stat, as they're similar, but sometimes different in the presence of bind mounts. * doc/coretuils.texi (stat invocation): Clarify the bind mount difference between stat and df.
2010-09-18tests: sync tests/init.sh from gnulibJim Meyering
* tests/init.sh: Update from gnulib.
2010-09-17maint: update to latest gnulibEric Blake
* gnulib: Update to latest. * src/copy.c (copy_reg): Use fdutimens instead of gl_futimens. * src/touch.c (touch): Adjust parameter order. * tests/init.sh: Resync from upstream.
2010-09-07tests: work around a failure with dash 0.5.4Pádraig Brady
* tests/misc/env: Check that the shell can support the operation, before filtering through `env`. Note dash 0.5.5 is unaffected by this issue.
2010-09-07tests: make various timeouts more robustPádraig Brady
* tests/init.cfg (retry_delay_): Describe the backoff method used. * tests/ls/readdir-mountpoint-inode: Add a timeout to the stat call to eliminate the chance of hangups. * tests/mv/i-3: Change the timeout required to pass from 1 second to a range of .1s - 3.1s. * tests/rm/dangling-symlink: Likewise.
2010-09-07tests: exclude some tests when running on NFSPádraig Brady
All tests currently pass on NFS on Linux kernel 2.6.22 at least, but some fail on 2.6.9, so we exclude those here. * tests/init.cfg (is_local_dir_): A new function returning if the specified directory is on a local file system. (require_local_dir_): A new function to skip tests if the current directory is not on a local file system. * tests/cp/existing-perm-race: Skip if non local. * tests/cp/file-perm-race: Likewise. * tests/cp/parent-perm: Likewise. * tests/cp/parent-perm-race: Likewise. * tests/cp/preserve-2: Likewise. * tests/mv/part-symlink: Likewise. * tests/du/basic: Use refactored function. * tests/install/basic-1: Likewise. * tests/mkdir/p-3: Likewise. * tests/dd/skip-seek-past-dev: Likewise. * tests/du/slink: Likewise. Remove redundant test for NFS file system. * tests/misc/join: s/local/locale/.
2010-08-28tac: avoid double freeJim Meyering
* src/tac.c (main): Reading a line longer than 16KiB would cause tac to realloc its primary buffer. Then, just before exit, tac would mistakenly free the original (now free'd) buffer. This bug was introduced by commit be6c13e7, "maint: always free a buffer, to avoid even semblance of a leak". * NEWS (Bug fixes): Mention it. * tests/misc/tac (double-free): New test, to exercise this. Reported by Salvo Tomaselli in <http://bugs.debian.org/594666>.
2010-08-27stat: add %m to output the mount point for a fileAaron Burgemeister
* src/find-mount-point.c: A new file refactoring find_mount_point() out from df.c * src/find-mount-point.h: Likewise. * src/df.c: Use the new find-mount-point module. * src/stat.c (print_stat): Handle the new %m format. (find_bind_mount): A new function to return the bind mount for a file if any. (out_mount_mount): Print the bind mount for a file, or else the standard mount point given by the find-mount-point module. (usage): Document the %m format directive. * src/Makefile.am: Reference the refactored find-mount-point.c * po/POTFILES.in: Add find_mount_point.c to the translation list * doc/coreutils.texi (stat invocation): Document %m, and how it may differ from the mount point that df outputs. * test/misc/stat-mount: A new test to correlate mount points output from df and stat. * tests/Makefile.am: Reference the new test. * NEWS: Mention the new feature * THANKS: Add the author Signed-off-by: Pádraig Brady <P@draigBrady.com>
2010-08-13* tests/misc/sort (use-nl): Fix comment to match the test case.Paul Eggert
2010-08-09ls: fix a test failure that should have been skippedDan Hipschman
* tests/ls/readdir-mountpoint-inode: Check to see if skip_test_ is called in a helper function via $() instead of mistakenly failing. * THANKS: Update.
2010-08-06sort: support all combinations of -d, -f, -i, -R, and -VPaul Eggert
* NEWS: Document this. * src/sort.c (getmonth): Omit LEN arg, as MONTH is now null-terminated. (compare_random): Don't null-terminate keys, as caller now does that. (compare_version): Remove. (debug_key): Null-terminate string for getmonth. (keycompare): Support combining -R with any of -d, -f, -i, -V. Also, support combining -V with any of -d, -i. (check_ordering_compatibility): Allow newly-supported combinations. * tests/misc/sort (02q, 02r, 02s): New tests, for new combinations. (incompat2): Now test -nR, since -fR are now compatible.
2010-08-05sort: tune and refactor --debug code, and fix minor underlining bugPaul Eggert
Formerly, the 'compare' function and some of its subroutines had a debugging flag, which caused them to output underlines. This change refactors the code so that debugging output is more-separated from the actual sorting. In the process, the change fixes a minor error in the debugging output. The change shortens the source code and executable size a tad, and improves CPU performance by 2.4% on my platform with a simple benchmark (C locale, line sorting, no debug). * src/sort.c (long_double, strtold): Move back to prelude, since they're now used by multiple functions again. (unit_order): Move to file scope, since it's now used by two functions. (find_unit_order, human_numcompare, numcompare, general_numcompare): Remove endptr parameter. All callers changed. (human_numcompare): Args are now const pointers. (getmonth): Endptr is now non-const. (key_numeric): Move up, since it's needed earlier. (debug_key): Take a line and a key as argument, instead of having the caller figure out where the field is. (debug_line): New function. (keycompare, compare): Omit debug parameter; debug output now done elsewhere. All callers changed. (write_line): Renamed from write_bytes; all callers changed. Use debug_line (not 'compare') to output debug info. Use a slightly faster check for whether output file is stdout. (check): Don't do debugging output; it's not that useful here, and it confuses the code. (main): Check for incompatibility between -c and --debug. Use standard diagnostic for incompatible options. * tests/misc/sort-debug-keys: Fix test case: "--Mi-1" is not a number, so its first character should not be underlined when debugging a numeric sort.
2010-08-03init.sh: work around trap limitation of some shellsPaul Eggert
* tests/init.sh (setup_): Move exit trap outside of shell function. This patch is imported from gnulib.
2010-08-03sort: fix bug in --debug when \0 is followed by \tPaul Eggert
* src/sort.c (debug_width): New function, which does not stop counting tabs at \0, and also invokes mbsnwidth. Stamp out strnlen! (count_tabs): Remove. (debug_key): Use debug_width instead of mbsnwidth and count_tabs. * tests/misc/sort-debug-keys: Check that \0 and \t intermix.