| Age | Commit message (Collapse) | Author |
|---|
|
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
|
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Run "make update-copyright".
|
|
Run "make update-copyright".
|
|
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
|
|
Run "make update-copyright".
|
|
Automatically make all of the changes like this:
-test "$VERBOSE" = yes && chgrp --version
+print_ver_ chgrp
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
|
|
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
Transformed via this shell code:
t=$'\t'
git ls-files \
| grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \
| grep -vE 'tests/pr/|help2man' \
| xargs grep -lE "^ *$t" \
| xargs perl -MText::Tabs -ni -le \
'$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
|
|
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
* maint.mk (sc_require_test_exit_idiom): New rule to enforce policy.
* tests/cp/acl: Adhere to the new policy.
* tests/cp/preserve-gid: Likewise.
* tests/dd/misc:
* tests/install/create-leading:
* tests/ln/sf-1:
* tests/ls/symlink-slash:
* tests/misc/help-version:
* tests/misc/ls-time:
* tests/misc/nice:
* tests/misc/shred-remove:
* tests/misc/stty:
* tests/misc/stty-row-col:
* tests/mkdir/p-1:
* tests/mkdir/p-2:
* tests/mkdir/p-3:
* tests/mkdir/p-v:
* tests/mkdir/special-1:
* tests/mkdir/writable-under-readonly:
* tests/mv/acl:
* tests/mv/backup-is-src:
* tests/mv/diag:
* tests/mv/dir-file:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/i-2:
* tests/mv/i-4:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/partition-perm:
* tests/mv/to-symlink:
* tests/rmdir/ignore:
* tests/tail-2/assert:
* tests/tail-2/assert-2:
* tests/touch/dangling-symlink:
* tests/touch/dir-1:
* tests/touch/empty-file:
* tests/touch/fifo:
* tests/touch/no-rights: Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
* tests/mv/no-target-dir: Likewise.
* tests/other-fs-tmpdir: Likewise.
* tests/rm/empty-name: Likewise.
* tests/rm/fail-eperm: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/unreadable: Likewise.
* tests/setgid-check: Likewise.
* tests/sparse-file: Likewise.
* tests/strace: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/touch/dangling-symlink: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/not-owner: Likewise.
* tests/mv/i-3: Likewise.
* tests/umask-check: Likewise.
* tests/mv/acl: Likewise.
* tests/cp/acl: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chmod/setgid: Likewise.
* tests/cp/existing-perm-race: Likewise.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/slink: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/md5sum-newline: Likewise.
* tests/misc/nice: Likewise.
* tests/misc/od-x8: Likewise.
* tests/misc/pwd-unreadable-parent: Likewise.
* tests/misc/selinux: Likewise.
* tests/misc/stty-row-col: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/arch: Likewise, and source $srcdir/../test-lib.sh *before*
the use of skip_test_.
|
|
* build-aux/check.mk: New file, from The Vaucanson Group.
* .x-sc_GPL_version: New file, to allow "version 2 or later"
in build-aux/check.mk.
* Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version.
* tests/check.mk: New file.
* tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh.
Begin factoring "sample-test" out of test scripts.
* tests/test-lib.sh: New file, to be sourced by all tests that
were previously derived from the "sample-test" template.
* tests/mkdtemp: New file.
* tests/touch/dir-1: Use test-lib.sh.
* tests/touch/empty-file: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/no-rights: Likewise. Also, don't sleep.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
* tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk,
to get the parallel-"make check" bits.
Move a slow test into tests/misc.
* tests/check.mk: Wrapper.
* tests/ls/time-1: Move this file to tests/misc/ls-time.
* tests/misc/ls-time: New file. From tests/ls/time-1.
* tests/ls/Makefile.am (TESTS): Remove time-1.
* tests/misc/Makefile.am (TESTS): Add ls-time.
|
|
|
|
|
|
|
|
than failing on some very recent (at least 2.3.99) versions of
the Linux kernel. Suggestion from Ulrich Drepper.
|
|
|
|
|
