summaryrefslogtreecommitdiff
path: root/tests/tail-2
AgeCommit message (Collapse)Author
2009-10-30tests: factor 350 fail=0 initializations into test-lib.shJim Meyering
Run this command to remove the factored-out "fail=0" lines. perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$') * tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts. * tests/...: nearly all bourne shell scripts Suggested by Eric Blake.
2009-10-30tests: remove the less-regular fail=0 assignments manuallyJim Meyering
* tests/tail-2/assert-2: * tests/tail-2/assert: * tests/cp/file-perm-race: * tests/misc/df: * tests/misc/truncate-dir-fail:
2009-10-22tests: add a test for the `tail -f' race condition bugGiuseppe Scrivano
If new data becomes available between the initial read and when tail registers the inotify watch descriptors, ensure that it is read before a new event happens on the file. * tests/Makefile.am (TESTS): Add tail-2/inotify-race. * tests/tail-2/inotify-race: New file.
2009-10-10tests: adjust tail-2/pid to work around FreeBSD 6.1 failureJim Meyering
* tests/tail-2/pid: Run tail -f --pid=... on an actual file, not on /dev/null, to avoid this failure on FreeBSD 6.1: tail: /dev/null: cannot change nonblocking mode: Inappropriate ioctl for device
2009-10-02tail: avoid a race where we could miss new data with --pidPádraig Brady
* src/tail.c (tail_forever, tail_forever_inotify): Close a race in tail_forever_inotify where new data written after the file check by a now dead process, but before the pid check, is not output. We use the POSIX guarantee that read() and write() are serialized wrt each other even in separate processes, to assume full file consistency after exit() and so poll for new data _after_ the writer has exited. This also allows us to not redundantly _wait_ for new data if the process is dead. * tests/tail-2/pid: Remove the now partially invalid sub second sleep check as we now don't unconditionally wait, and replace it with a check for the redundant sleep. Also clarify some of the existing comments. * NEWS: Mention the fix.
2009-09-30tests: tail-2/pid: use a 3-second timeout, not 1Jim Meyering
* tests/tail-2/pid: When using the timeout program to ensuring that tail -s.1 --pid=$PID_T_MAX does not wait forever, use a timeout longer than 1 second. A 1-second timeout could be too short on a very busy system, and result in a timeout, and hence false-positive failure. 2009-09-30 Jim Meyering <meyering@redhat.com>
2009-09-08tests: tail-2/assert: reduce risk of race conditionPádraig Brady
* tests/tail2/assert: This reverts commit be853120, 25-08-2009, "tests: tail-2/assert: avoid risk of race condition" kill -0 doesn't send a signal and so will only confirm that the background process was forked, which we know already because we have its pid.
2009-09-07tail: ignore -f for piped-stdin, as POSIX requiresJim Meyering
* src/tail.c (main): Tailing a pipe "forever" is not useful, and POSIX specifies that tail ignore the -f when there is no file argument and stdin is a FIFO or pipe. So we do that. In addition, GNU tail excludes "-" arguments from the list of files to tail forever, when the associated file descriptor is connected to a FIFO or pipe. Before this change, ":|tail -f" would hang. Reported by Ren Yang and Ulrich Drepper. * tests/tail-2/pipe-f: Test for this. * tests/tail-2/pipe-f2: Ensure tail doesn't exit early for a fifo. * tests/Makefile.am (TESTS): Add these tests. * NEWS (POSIX conformance): Mention it.
2009-09-07tests: tail-2/flush-initial should not rely on stdbufPádraig Brady
* tests/tail-2/flush-initial: stdbuf is not built on all systems. In any case it's redundant since stdout will automatically be buffered since we're redirecting to file. So just call tail without using stdbuf.
2009-09-07tests: tail-2/infloop-1: avoid rare test failure on a busy systemJim Meyering
* tests/tail-2/infloop-1: Sleep 3 seconds, not 1, but in increments of 0.1 second. Before, this test would fail ~1 time in 20 via "make -j9 check" on a quad-core system. Correct comment.
2009-09-07tail -f: handle "-"/stdin once againJim Meyering
* src/tail.c (main) [HAVE_INOTIFY]: When stdin (i.e., "-", or no args, but not /dev/stdin) is specified on the command line, don't use inotify. Reported by Bill Brelsford in <http://bugs.debian.org/545422>. * tests/tail-2/follow-stdin: New file. Test for this. * tests/Makefile.am (TESTS): Add the test. * NEWS (Bug fixes): Mention it. This bug was introduced in coreutils-7.5 via commit ae494d4b, 2009-06-02, "tail: use inotify if it is available".
2009-09-06tests: tail-2/flush-initial: correct race avoidance codeJim Meyering
* tests/tail-2/flush-initial: Wait for the file to be nonempty, not for the process. Based on a suggestion from Pádraig Brady.
2009-09-06tail: flush initial output before possibly blockingJim Meyering
* src/tail.c (main): Flush any output from tail_file, before calling tail_forever_inotify, which can block. * tests/tail-2/flush-initial: New file. Test for the bug. * tests/Makefile.am (TESTS): Add tail-2/flush-initial. * NEWS (Bug fixes): Mention it. This bug was introduced in coreutils-7.5 via commit ae494d4b, 2009-06-02, "tail: use inotify if it is available".
2009-09-05tests: test old tail -f method even on systems with inotifyPádraig Brady
* src/tail.c (main): Add an undocumented ---disable-inotify option to allow disabling inotify. * tests/tail-2/pid: Run test in both normal and "disable_inotify" modes. * tests/tail-2/tail-n0f: Likewise. * tests/tail-2/wait: Likewise. * tests/tail-2/append-only: Likewise.
2009-09-04tests: fix a tail-2/pid failure on GNU/kFreeBSDPetr Salinger
* tests/tail-2/wait: Increase the file name recheck frequency to fix a failure on systems without inotify and a file timestamp precision of 1 second (like GNU/kFreeBSD).
2009-09-04tests: fix a failure when running tail-2/wait as rootPádraig Brady
* tests/tail-2/wait: Silently skip a portion of the test when running as root, rather than failing the whole test. This regression was introduced with commit 84b5844d, 2009-09-03, "tests: simplify and fix a race in 2 tail --follow tests".
2009-09-03tests: simplify and fix a race in 2 tail --follow testsPádraig Brady
* tests/tail-2/pid: Use the timeout command to determine process longevity, rather than querying /proc/$pid/status. The latter was racy in any case when inotify is used, as then tail wakes up periodically even for unchanging files therefore causing the check for "S (sleeping)" state to fail intermittently. * tests/tail-2/wait: Likewise.
2009-08-26tests: tail-2/assert: avoid risk of race conditionJim Meyering
* tests/tail-2/assert: Avoid spurious failure due to race condition. Rather than sleeping for 1 second and crossing fingers, wait explicitly for backgrounded tail process to start. Otherwise, this test would fail under heavy load.
2009-08-16tests: tail-2/append-only: don't discard stderrJim Meyering
* tests/tail-2/append-only: Don't discard a diagnostic that may help explain why this test fails for some. Details in http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/17621/focus=17641
2009-08-12tests: improve one of the tail --pid testsPádraig Brady
* tests/tail-2/pid: Speed up the test by specifying a timeout of 100ms rather than the default 1s. Also skip the test instead of failing in the unlikely case were the pid required to be missing pid is present.
2009-07-30tail: properly parse fractional seconds when monitoring a pidPádraig Brady
* src/tail.c (tail_forever_inotify): The fractional part of the delay was 1000 times too large. * tests/tail-2/pid: Add a test to ensure the timeout happens for this case.
2009-07-30tests: test for just-fixed tail --pid bugJim Meyering
* tests/tail-2/pid: Ensure tail exits successfully when PID dies.
2009-07-04tests: refactor code to use require_proc_pid_status_Giuseppe Scrivano
* tests/tail-2/tail-n0f: Read the process status using the test-lib.sh require_proc_pid_status_ function.
2009-07-03tests: tail-2/wait: rename internal file nameJim Meyering
* tests/tail-2/wait: Rename file from not_accessible to unreadable, since all the test cares about is readability.
2009-07-03tests: tail-2/wait: don't fail when run as rootGiuseppe Scrivano
* tests/tail-2/wait: Ensure that the unreadable file really is not readable before trying to run "tail -f" on it.
2009-06-23maint: update all Copyright year lists to include 2009Jim Meyering
2009-06-23tests: tail-2/pid: include more info upon failureJim Meyering
* tests/tail-2/pid: Print unexpected $state upon failing.
2009-06-15tail: use inotify if it is availableGiuseppe Scrivano
* NEWS: Document the new feature. * m4/jm-macros.m4: Check if inotify is present. * src/tail.c (tail_forever_inotify): New function. (main): Use the inotify-based function, if possible. * tests/Makefile.am: Add new tests for tail. * tests/test-lib.sh (require_proc_pid_status_, get_process_status_): New functions. * tests/tail-2/pid: New file. * tests/tail-2/wait: New file. * tests/tail-2/tail-n0f: Refactor code into the test-lib.sh require_proc_pid_status_ function.
2009-01-19tests: tail-2/infloop-1 is racyJim Meyering
* tests/tail-2/infloop-1: Add a comment to that effect.
2008-09-10tests: use "Exit $fail", not (exit $fail); exit $failJim Meyering
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63 * tests/**: Convert all uses: This restrictive change converted the vast majority: git grep -l '^(exit \$fail); exit \$fail$' \ | xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/' And this did the rest, plus a few undesirable ones, so I manually backed out the changes to ChangeLog-* and build-aux/check.mk: git grep -l -E '\(exit [^)]+\); exit ' \ | xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-04-27tests: move another file (expensive) into test-lib.shJim Meyering
* tests/expensive: Remove file. Move contents into ... * tests/test-lib.sh (expensive_): ...here. New function. * tests/du/fd-leak: Update caller to use the new function. * tests/mv/leak-fd: Likewise. * tests/rm/hash: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/Makefile.am (EXTRA_DIST): Remove its name.
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-03-28Require that "(exit $fail); exit $fail" be last line of each test.Jim Meyering
* maint.mk (sc_require_test_exit_idiom): New rule to enforce policy. * tests/cp/acl: Adhere to the new policy. * tests/cp/preserve-gid: Likewise. * tests/dd/misc: * tests/install/create-leading: * tests/ln/sf-1: * tests/ls/symlink-slash: * tests/misc/help-version: * tests/misc/ls-time: * tests/misc/nice: * tests/misc/shred-remove: * tests/misc/stty: * tests/misc/stty-row-col: * tests/mkdir/p-1: * tests/mkdir/p-2: * tests/mkdir/p-3: * tests/mkdir/p-v: * tests/mkdir/special-1: * tests/mkdir/writable-under-readonly: * tests/mv/acl: * tests/mv/backup-is-src: * tests/mv/diag: * tests/mv/dir-file: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/i-2: * tests/mv/i-4: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/partition-perm: * tests/mv/to-symlink: * tests/rmdir/ignore: * tests/tail-2/assert: * tests/tail-2/assert-2: * tests/touch/dangling-symlink: * tests/touch/dir-1: * tests/touch/empty-file: * tests/touch/fifo: * tests/touch/no-rights: Likewise. Signed-off-by: Jim Meyering <meyering@redhat.com>
2008-02-09tests: Remove priv-check. Use new require_root_ function instead.Jim Meyering
* tests/priv-check: Remove file. * tests/Makefile.am (EXTRA_DIST): Remove priv-check. * tests/test-lib.sh (require_root_): New function. Use this function rather than sourcing the priv-check file. * tests/sample-test: Use require_root_ rather than priv-check. * tests/chown/basic: Likewise. * tests/cp/cp-a-selinux: Likewise. * tests/cp/preserve-gid: Likewise. * tests/cp/special-bits: Likewise. * tests/ls/nameless-uid: Likewise. * tests/misc/chcon: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/no-give-up: Likewise. * tests/rm/one-file-system: Likewise. * tests/tail-2/append-only: Likewise. * tests/touch/now-owned-by-other: Likewise. * tests/rm/fail-eperm: Use skip_if_root_ rather than priv-check. * Makefile.maint (sc_root_tests): Reflect this change: search for the new function name.
2008-02-09tests: call skip_test_ in place of echo+exit 77Jim Meyering
* tests/mv/no-target-dir: Likewise. * tests/other-fs-tmpdir: Likewise. * tests/rm/empty-name: Likewise. * tests/rm/fail-eperm: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/isatty: Likewise. * tests/rm/unreadable: Likewise. * tests/setgid-check: Likewise. * tests/sparse-file: Likewise. * tests/strace: Likewise. * tests/tail-2/append-only: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/tail-n0f: Likewise. * tests/touch/dangling-symlink: Likewise. * tests/touch/fifo: Likewise. * tests/touch/not-owner: Likewise. * tests/mv/i-3: Likewise. * tests/umask-check: Likewise. * tests/mv/acl: Likewise. * tests/cp/acl: Likewise. * tests/chgrp/deref: Likewise. * tests/chmod/setgid: Likewise. * tests/cp/existing-perm-race: Likewise. * tests/cp/file-perm-race: Likewise. * tests/cp/parent-perm-race: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/long-from-unreadable: Likewise. * tests/du/long-sloop: Likewise. * tests/du/slink: Likewise. * tests/ls/nameless-uid: Likewise. * tests/ls/stat-dtype: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/md5sum-newline: Likewise. * tests/misc/nice: Likewise. * tests/misc/od-x8: Likewise. * tests/misc/pwd-unreadable-parent: Likewise. * tests/misc/selinux: Likewise. * tests/misc/stty-row-col: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/arch: Likewise, and source $srcdir/../test-lib.sh *before* the use of skip_test_.
2008-02-09tests: move the very-expensive file into test-lib.shJim Meyering
* tests/very-expensive: Remove file. * tests/test-lib.sh (very_expensive_): New function. * tests/Makefile.am (EXTRA_DIST): Remove very-expensive. * tests/cp/perm: Call the new function, rather than sourcing the file. * tests/tail-2/assert: Likewise. * tests/tail-2/assert-2: Likewise. * tests/du/2g: Likewise.
2007-10-14Pull all TESTS_ENVIRONMENT settings "up" into tests/check.mk.Jim Meyering
* tests/Makefile.am.in (TESTS_ENVIRONMENT): Remove definition. * tests/chgrp/Makefile.am: Likewise. * tests/chmod/Makefile.am: Likewise. * tests/chown/Makefile.am: Likewise. * tests/cp/Makefile.am: Likewise. * tests/dd/Makefile.am: Likewise. * tests/du/Makefile.am: Likewise. * tests/install/Makefile.am: Likewise. * tests/ln/Makefile.am: Likewise. * tests/ls/Makefile.am: Likewise. * tests/misc/Makefile.am: Likewise. * tests/mkdir/Makefile.am: Likewise. * tests/mv/Makefile.am: Likewise. * tests/readlink/Makefile.am: Likewise. * tests/rm/Makefile.am: Likewise. * tests/rmdir/Makefile.am: Likewise. * tests/tail-2/Makefile.am: Likewise. * tests/touch/Makefile.am: Likewise. * tests/check.mk (TESTS_ENVIRONMENT) [EXEEXT, EGREP, MAKE, PERL]: [CONFIG_HEADER, build_programs, host_os, host_triplet, PATH]: [REPLACE_GETCWD, CU_TEST_NAME]: Add definitions here. * tests/misc/pwd-long: Use $abs_top_builddir/src, not $BUILD_SRC_DIR. * tests/dd/skip-seek: Don't use $ENV{PROG}. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Likewise. * tests/mv/i-1: Likewise.
2007-09-15Enable some previously omitted test scripts. Add a test cross-check.Jim Meyering
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Reenable this test. Adjust for new rm. * tests/mkdir/Makefile.am: Add writable-under-readonly. * tests/mkdir/writable-under-readonly: Add some comments. This test is always skipped, for now. * tests/Makefile.am (ta): Hook up the new root-only script. * tests/tail-2/infloop-1: Make this test pass. * tests/tail-2/Makefile.am (TESTS): Add infloop-1. * tests/tail-2/fflush: Remove unused file. * tests/check.mk (vc_executable_is_in_TESTS): More portable. * tests/check.mk (check): Depend on the above. * build-aux/check.mk: Remove comment mentioning AUTHORS file.
2007-09-15Factor out definitions in TESTS_ENVIRONMENT of srcdir, top_srcdir, etc.Jim Meyering
tests/check.mk (top_srcdir): Define. tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir), $(abs_top_srcdir), and $(abs_top_builddir), since they're defined via the included tests/check.mk.
2007-09-15Adapt tests/tail-2/ to use test-lib.sh.Jim Meyering
2007-08-25Remove all .cvsignore files from version control.Jim Meyering
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
2007-07-10Change "version 2" to "version 3" in all copyright notices.Jim Meyering
2007-01-13Put CU_TEST_NAME in the environment for each test run by "make check".Jim Meyering
* Transform all Makefile.am files so that when running "make check", CU_TEST_NAME is set to the name of the test. This is so that when I run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check" on the entire package it is more convenient to map a leak or error found in a valgrind log file back to the offending test. Use this command: (echo tests/Makefile.am.in; find tests -name Makefile.am) \ |xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \ -e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
2006-11-19* tests/tail-2/assert-2: Mark as a very-expensive test, because IJim Meyering
find the 7-second sleep annoyingly long. Besides, this test is probably far too specific and timing sensitive ever to trigger again. * tests/tail-2/assert: Likewise.
2006-11-16* tests/tail-2/append-only: If chattr +a fails, exit 77 (to tellJim Meyering
automake we're skipping this test), and give a diagnostic to tell the user the same thing. Reported by Mike Grayson.
2006-10-22* tests/sample-test: Quote variables containing absolute buildJim Meyering
tree paths. In the cleanup trap, make sure `cd' succeeds before `chmod'ing and `rm'ing the temporary files. * tests/chgrp/basic: Likewise. * tests/chgrp/deref: Likewise. * tests/chgrp/no-x: Likewise. * tests/chgrp/posix-H: Likewise. * tests/chgrp/recurse: Likewise. * tests/chmod/c-option: Likewise. * tests/chmod/equal-x: Likewise. * tests/chmod/equals: Likewise. * tests/chmod/inaccessible: Likewise. * tests/chmod/no-x: Likewise. * tests/chmod/octal: Likewise. * tests/chmod/setgid: Likewise. * tests/chmod/umask-x: Likewise. * tests/chmod/usage: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/separator: Likewise. * tests/cp/acl: Likewise. * tests/cp/backup-1: Likewise. * tests/cp/backup-dir: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-HL: Likewise. * tests/cp/cp-deref: Likewise. * tests/cp/cp-i: Likewise. * tests/cp/cp-mv-backup: Likewise. * tests/cp/cp-parents: Likewise. * tests/cp/deref-slink: Likewise. * tests/cp/dir-rm-dest: Likewise. * tests/cp/dir-slash: Likewise. * tests/cp/dir-vs-file: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/link: Likewise. * tests/cp/link-no-deref: Likewise. * tests/cp/link-preserve: Likewise. * tests/cp/no-deref-link1: Likewise. * tests/cp/no-deref-link2: Likewise. * tests/cp/no-deref-link3: Likewise. * tests/cp/perm: Likewise. * tests/cp/preserve-2: Likewise. * tests/cp/r-vs-symlink: Likewise. * tests/cp/same-file: Likewise. * tests/cp/slink-2-slink: Likewise. * tests/cp/sparse: Likewise. * tests/cp/special-bits: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/symlink-slash: Likewise. * tests/dd/not-rewound: Likewise. * tests/dd/skip-seek2: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/deref: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/fd-leak: Likewise. * tests/du/hard-link: Likewise. * tests/du/inaccessible-cwd: Likewise. * tests/du/long-from-unreadable: Likewise. * tests/du/long-sloop: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/restore-wd: Likewise. * tests/du/slash: Likewise. * tests/du/slink: Likewise. * tests/du/trailing-slash: Likewise. * tests/du/two-args: Likewise. * tests/fmt/long-line: Likewise. * tests/install/basic-1: Likewise. * tests/install/create-leading: Likewise. * tests/install/d-slashdot: Likewise. * tests/install/trap: Likewise. * tests/ln/misc: Likewise. * tests/ln/target-1: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/inode: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-vs-dirent: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/close-stdout: Likewise. * tests/misc/csplit: Likewise. * tests/misc/date-sec: Likewise. * tests/misc/false-status: Likewise. * tests/misc/head-c: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/mknod: Likewise. * tests/misc/nl: Likewise. * tests/misc/nohup: Likewise. * tests/misc/pathchk1: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-long: Likewise. * tests/misc/shuf: Likewise. * tests/misc/sort-rand: Likewise. * tests/misc/split-a: Likewise. * tests/misc/split-fail: Likewise. * tests/misc/split-l: Likewise. * tests/misc/stat-fmt: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/concurrent-1: Likewise. * tests/mkdir/p-1: Likewise. * tests/mkdir/p-2: Likewise. * tests/mkdir/p-3: Likewise. * tests/mkdir/p-slashdot: Likewise. * tests/mkdir/p-thru-slink: Likewise. * tests/mkdir/p-v: Likewise. * tests/mkdir/parents: Likewise. * tests/mkdir/perm: Likewise. * tests/mkdir/t-slash: Likewise. * tests/mv/acl: Likewise. * tests/mv/atomic: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/childproof: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir-file: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/hard-2: Likewise. * tests/mv/hard-3: Likewise. * tests/mv/hard-4: Likewise. * tests/mv/hard-link-1: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-2: Likewise. * tests/mv/i-3: Likewise. * tests/mv/i-4: Likewise. * tests/mv/i-5: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self-4: Likewise. * tests/mv/leak-fd: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/no-target-dir: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/part-hardlink: Likewise. * tests/mv/part-rename: Likewise. * tests/mv/part-symlink: Likewise. * tests/mv/partition-perm: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/reply-no: Likewise. * tests/mv/trailing-slash: Likewise. * tests/mv/update: Likewise. * tests/od/od-N: Likewise. * tests/od/x8: Likewise. * tests/readlink/can-e: Likewise. * tests/readlink/can-f: Likewise. * tests/readlink/can-m: Likewise. * tests/readlink/rl-1: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dangling-symlink: Likewise. * tests/rm/deep-1: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/dot-rel: Likewise. * tests/rm/empty-inacc: Likewise. * tests/rm/f-1: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/hash: Likewise. * tests/rm/i-1: Likewise. * tests/rm/i-no-r: Likewise. * tests/rm/ignorable: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/ir-1: Likewise. * tests/rm/isatty: Likewise. * tests/rm/no-give-up: Likewise. * tests/rm/r-1: Likewise. * tests/rm/r-2: Likewise. * tests/rm/r-3: Likewise. * tests/rm/r-4: Likewise. * tests/rm/readdir-bug: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm4: Likewise. * tests/rm/rm5: Likewise. * tests/rm/sunos-1: Likewise. * tests/rm/unread2: Likewise. * tests/rm/unread3: Likewise. * tests/rmdir/fail-perm: Likewise. * tests/rmdir/t-slash: Likewise. * tests/shred/exact: Likewise. * tests/shred/remove: Likewise. * tests/sum/sysv: Likewise. * tests/tail-2/append-only: Likewise. * tests/tail-2/assert: Likewise. * tests/tail-2/assert-2: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/fflush: Likewise. * tests/tail-2/infloop-1: Likewise. * tests/tail-2/proc-ksyms: Likewise. * tests/tail-2/start-middle: Likewise. * tests/tail-2/tail-n0f: Likewise. * tests/tee/basic: Likewise. * tests/tee/dash: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/no-create-missing: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/obsolescent: Likewise. * tests/touch/read-only: Likewise. * tests/touch/relative: Likewise.
2006-09-24* tests/tail-2/proc-ksyms: Require that /proc/ksyms be readableJim Meyering
as well as existing.
2006-08-22* aclocal.m4, config.hin, configure:Paul Eggert
Remove from CVS, since ./bootstrap generates them automatically. * .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log. Remove more-specific entries. This catches files like configure.lineno. * man/.cvsignore: Add Makefile.in. * src/.cvsignore: Add Makefile.in. Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c. For .cvsignore file under the tests directory: Add Makefile.in. Sort entries if necessary. Remove *.I, *.E, *.X, *.O, *-tests, build-script, mk-script if they're never created in this directory. * build-aux/.cvsignore: New file. * doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf, coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it is, but the makefile doesn't mention it). Remove coreutils.info as it is subsumed by coreutils.info*. * lib/.cvsignore: Add Makefile.in, getdate.tab.h. Remove stat.c, sysexit.h. * m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4, inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4, lock.m4, printf-posix.m4, same-inode.m4, size_max.m4, uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of these are put in automatically by ../bootstrap, but that's a bootstrap bug that I plan to fix shortly. * po/.cvsignore: More ../bootstrap-related fixes, plus remove old cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg, cat-id-dbl.c, messages.mo, stamp-cat-id.
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-28 14:51:42 +0000