summaryrefslogtreecommitdiff
path: root/tests/split
AgeCommit message (Collapse)Author
2016-01-01maint: update all copyright year number rangesPádraig Brady
Run "make update-copyright" and then... * gnulib: Update to latest with copyright year adjusted. * tests/init.sh: Sync with gnulib to pick up copyright year. * bootstrap: Likewise. * tests/sample-test: Adjust to use the single most recent year.
2015-11-04all: avoid quoting file names when possiblePádraig Brady
Quote file names using the "shell-escape" or "shell-escape-always" methods, which quote as appropriate for most shells, and better support copy and paste of presented names. The "always" variant is used when the file name is embedded in an error message with surrounding spaces. * cfg.mk (sc_error_shell_quotes): A new syntax check rule to suggest quotef() where appropriate. (sc_error_shell_always_quotes): Likewise for quoteaf(). * src/system.h (quotef): A new define to apply shell quoting when needed. I.E. when shell character or ':' is present. (quoteaf): Likewise, but always quote. * src/*.c: Use quotef() and quoteaf() rather than quote() where appropriate. * tests/: Adjust accordingly.
2015-09-22maint: use adaptive approach for `ulimit -v` based testsBernhard Voelker
When configured with either 'symlinks' or 'shebangs' as value for the --enable-single-binary option, tests based on `ulimit -v` are skipped. The reason is that the multicall 'coreutils' binary requires much more memory due to shared libraries being loaded, and the size of the 'date' binary (~290KiB) compared to the multicall binary (~5MiB), of course. Finally, in the case of 'shebangs', the starting shell requires more memory, too Instead of using hard-coded values for the memory limit, use an adaptive approach: first determine the amount of memory for a similar, yet more trivial invocation of the command, and then do the real test run using that limit (plus some buffer in some cases). * init.cfg (require_ulimit_v_): Remove function. (get_min_ulimit_v_): Add function to determine the minimum memory limit required for a given command in an adaptive way. * cfg.mk (sc_prohibit_test_ulimit_without_require_): Change the name of the above function in the syntax-check rule. * tests/cp/link-heap.sh: Use the above function to determine the minimum memory required to run a command simpler than in the real test run. Use that limit plus a buffer there. While at it, change to list of commands in the subshell to fail also if the beginning `ulimit -v` fails. * tests/dd/no-allocate.sh: Likewise. * tests/misc/csplit-heap.sh: Likewise. * tests/misc/cut-huge-range.sh: Likewise. * tests/misc/head-c.sh: Likewise. * tests/misc/printf-surprise.sh: Likewise. * tests/split/line-bytes.sh: Likewise. * tests/rm/many-dir-entries-vs-OOM.sh: Likewise - doing it separately for each program under test.
2015-05-13split: auto set suffix len for --numeric-suffixes=<N --number=NPádraig Brady
Supporting `split --numeric-suffixes=1 -n100` for example. * doc/coreutils.texi (split invocation): Mention the two use cases for the FROM parameter, and the consequences on the suffix length determination. * src/split.c (set_suffix_length): Use the --numeric-suffixes FROM parameter in the suffix width calculation, when it's less than the number of files specified in --number. * tests/split/suffix-auto-length.sh: Add test cases. Fixes http://bugs.gnu.org/20511
2015-01-20tests: use returns_ function for new split testBernhard Voelker
* tests/split/record-sep.sh: Use the recently added returns_ function to simplify the shell syntax in this test. Also remove the redirection of stdout/stderr to /dev/null as this eases analyzing errors.
2015-01-19split: new -t option to select record separatorAssaf Gordon
* src/split.c (eolchar): A new variable to hold the separator character (unibyte for now). This is reference throughout rather than hardcoding '\n'. (usage): Describe the new --separator option, and mention records along with lines so there is no ambiguity that all options treat lines and records equivalently. (main): Have -t update eolchar, or default to '\n'. * tests/split/record-sep.sh: New test case. * tests/local.mk: Reference the new test. * doc/coreutils.texi (split invocation): Document the new option. Adjust --lines, --line-bytes, --number=[lr]/... to mention they pertain to records if --separator is specified. * NEWS: Mention the new feature.
2015-01-14tests: add extra protection against unexpected exitsPádraig Brady
Many tests use `program ... && fail=1` to ensure expected error situations are indicated. However that would mask an unexpected exit (like a crash). Therefore explicitly check the expected exit code. Note where error messages are also verified, the extra protection is not added. * tests/init.sh (returns_): A new helper function to check the return code of a command, and used throughout the tests. * cfg.mk (sc_prohibit_and_fail_1): Add a syntax check to avoid new instances of this issue.
2015-01-01maint: update all copyright year number rangesPádraig Brady
Run "make update-copyright" and then... * tests/sample-test: Adjust to use the single most recent year. * tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message, so that year is updated automatically in future.
2014-12-25tests: fix error message check on some systemsPádraig Brady
http://hydra.nixos.org/build/18129583 identified (on OS X) an incorrect test assumption in the previous commit. * gl/lib/xdectoint.c (__xnumtoint): Suppress the EINVAL error message as it's redundant in this context. * tests/misc/tail.pl: Suppress _optionally_ appended strerror messages. * tests/fmt/base.pl: Likewise. * tests/pr/pr-tests.pl: Likewise. * tests/split/l-chunk.sh: Likewise.
2014-12-19diagnose too-large numbers betterPádraig Brady
Following on from commit v8.23-82-gaddae94, consistently diagnose numbers that are too large, so as to distinguish from other errors, and make the limits obvious. * gl/modules/xdectoint: A new module implementing xdecto[iu]max(), which handles the common case of parsing a bounded integer and exiting with a diagnostic on error. * gl/lib/xdectoimax.c: The signed variant. * gl/lib/xdectoint.c: The parameterized implementation. * gl/lib/xdectoint.h: The interface. * gl/lib/xdectoumax.c: The unsigned variant. * bootstrap.conf: Reference the new module. * cfg.mk (exclude_file_name_regexp--sc_require_config_h_first): Exclude the parameterized templates. * src/csplit.c: Output EOVERFLOW or ERANGE errors if appropriate. * src/fmt.c: Likewise. * src/fold.c: Likewise. * src/head.c: Likewise. * src/ls.c: Likewise. * src/nl.c: Likewise. * src/nproc.c: Likewise. * src/shred.c: Likewise. * src/shuf.c: Likewise. * src/stdbuf.c: Likewise. * src/stty.c: Likewise. * src/tail.c: Likewise. * src/truncate.c: Likewise. * src/split.c: Likewise. * src/pr.c: Likewise. * tests/pr/pr-tests.pl: Adjust to avoid matching errno diagnostic. * tests/fmt/base.pl: Likewise. * tests/split/l-chunk.sh: Likewise. * tests/misc/shred-negative.sh: Likewise. * tests/misc/tail.pl: Likewise. Also remove the redundant existing ERR_SUBST from test err-6. * tests/ls/hex-option.sh: Check HEX/OCT options. * tests/misc/shred-size.sh: Likewise. * tests/misc/stty-row-col.sh: Likewise.
2014-10-07tests: split/b-chunk.sh: avoid spurious fail on non-LinuxJim Meyering
* tests/split/b-chunk.sh: Skip each file that does not exist. Some systems lack /proc/version or /sys/kernel/profiling
2014-10-08maint: avoid syntax-check failures in previous patchPádraig Brady
* tests/misc/od-j.sh: Non standard comparison order. * tests/split/b-chunk.sh: Confusing input file name. * tests/tail-2/tail-c.sh: Redundant require ulimit.
2014-10-07wc: don't miscount /sys and similar file systemsPaul Eggert
Fix similar problems in head, od, split, tac, and tail. Reported by George Shuklin in: http://bugs.gnu.org/18621 * NEWS: Document this. * src/head.c (elseek): Move up. (elide_tail_bytes_pipe, elide_tail_lines_pipe): New arg CURRENT_POS. All uses changed. (elide_tail_bytes_file, elide_tail_lines_file): New arg ST and remove arg SIZE. All uses changed. * src/head.c (elide_tail_bytes_file): * src/od.c (skip): Avoid optimization for /sys files, where st_size is bogus and st_size == st_blksize. Don't report error at EOF when not optimizing. * src/head.c, src/od.c, src/tail.c: Include "stat-size.h". * src/split.c (input_file_size): New function. (bytes_split, lines_chunk_split, bytes_chunk_extract): New arg INITIAL_READ. All uses changed. Use it to double-check st_size. * src/tac.c (tac_seekable): New arg FILE_POS. All uses changed. (copy_to_temp): Return size of temp file. All uses changed. * src/tac.c (tac_seekable): * src/tail.c (tail_bytes): * src/wc.c (wc): Don't trust st_size; double-check by reading. * src/wc.c (wc): New arg CURRENT_POS. All uses changed. * tests/local.mk (all_tests): Add tests/misc/wc-proc.sh, tests/misc/od-j.sh, tests/tail-2/tail-c.sh. * tests/misc/head-c.sh: * tests/misc/tac-2-nonseekable.sh: * tests/split/b-chunk.sh: Add tests for problems with /proc and /sys files. * tests/misc/od-j.sh, tests/misc/wc-proc.sh, tests/tail-2/tail-c.sh: New files.
2014-07-14tests: avoid hang when files created with wrong permissionsPádraig Brady
* tests/split/b-chunk.sh: Never show the rm prompt which would hang the test suite. This was seen when split erroneously created files with no persmissions, which was triggered by this compiler bug in clang 3.4: http://llvm.org/bugs/show_bug.cgi?id=18346
2014-05-07tests: improve diagnostics when asserting empty filesPádraig Brady
* tests/chmod/c-option.sh: Use `compare /dev/null ... || fail=1` rather than `test -s ... && fail=1`, so that the file contents are output, thus improving diagnostics for failing tests. * tests/cp/acl.sh: Likewise. * tests/cp/cp-a-selinux.sh: Likewise. * tests/cp/cp-mv-enotsup-xattr.sh: Likewise. * tests/cp/reflink-perm.sh: Likewise. * tests/dd/misc.sh: Likewise. * tests/misc/env-null.sh: Likewise. * tests/misc/env.sh: Likewise. * tests/misc/nice.sh: Likewise. * tests/misc/nohup.sh: Likewise. * tests/misc/printenv.sh: Likewise. * tests/misc/xattr.sh: Likewise. * tests/mv/update.sh: Likewise. * tests/rm/deep-2.sh: Likewise. * tests/rm/read-only.sh: Likewise. * tests/split/r-chunk.sh: Likewise. * tests/tail-2/follow-stdin.sh: Likewise. * tests/tail-2/inotify-race.sh: Likewise. * tests/tail-2/wait.sh: Likewise. * tests/touch/no-dereference.sh: Likewise. * cfg.mk (sc_prohibit_test_empty:): New syntax-check. * tests/cp/proc-zero-len.sh: Adjust to avoid false syntax-check failure. * tests/cp/proc-zero-len.sh: Likewise. * tests/mv/part-symlink.sh: Likewise. * tests/tail-2/infloop-1.sh: Likewise.
2014-03-05tests: avoid the :> construct which can hide errorsPádraig Brady
On most shells `:>file || framework_failure_` will not evaluate the framework_failure_ even if there was an error writing the file. shells which do evaluate the failure are ksh 93u+ and bash 4.2, while shells wich don't include bash 4.3, solaris, freebsd, dash. Furthermore this construct is problematic on Solaris 10 sh, which will try to optimize away a `:' command in a loop after the first iteration, even if it is redirected. * tests/cp/link-deref.sh: Remove the leading colon on redirections. * tests/cp/reflink-perm.sh: Likewise. * tests/id/zero.sh: Likewise. * tests/install/install-C.sh: Likewise. * tests/misc/env.sh: Likewise. * tests/misc/md5sum-bsd.sh: Likewise. * tests/misc/runcon-no-reorder.sh: Likewise. * tests/mv/partition-perm.sh: Likewise. * tests/rm/r-root.sh: Likewise. * tests/split/l-chunk.sh: Likewise. * tests/split/line-bytes.sh: Likewise. * tests/tail-2/inotify-rotate.sh: Likewise. * tests/tail-2/retry.sh: Likewise. * tests/tail-2/symlink.sh: Likewise. * tests/tail-2/wait.sh: Likewise. * tests/touch/read-only.sh: Likewise. + cfg.mk (sc_prohibit_colon_redirection): A new syntax check to avoid further instances of this creeping in.
2014-01-02maint: update all copyright year number rangesBernhard Voelker
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2013-05-27tests: avoid spurious failure when SIZE_MAX is 2^32-1Jim Meyering
* tests/split/line-bytes.sh: Since we've limited virtual memory to 20MB, choose a smaller size, 1GiB (which is <= SIZE_MAX) rather than 1EiB, which is larger than SIZE_MAX on 32-bit systems. I confirmed that this test still fails when the split.c-modifying part of v8.21-58-gfec363c is backed out.
2013-05-23split: with --line-bytes only allocate memory as neededPádraig Brady
* src/split.c (line_bytes_split): Rewrite to only buffer when necessary. I.E. only increase the buffer when we've already lines output in a split and we encounter a line larger than the input buffer size, in which case a hold buffer will be increased in increments of the input buffer size. (lines_rr): Use the more abstract xalloc_die() just like we did in line_bytes_split(), rather than explicitly printing the "memory exhausted" message and exiting. * tests/split/line-bytes.sh: Add a new test for this function which previously had no test coverage. * tests/local.mk: Reference the new test. * NEWS: Mention the improvement. Fixes http://bugs.gnu.org/13537
2013-04-25tests: fix usage of require_ulimit_Pádraig Brady
* init.cfg (require_ulimit_v_): Renamed from require_ulimit_ as this only checks for ulimit -v support. Other uses of ulimit -t and ulimit -n in tests shouldn't cause false failures if not supported. * cfg.mk (sc_prohibit_test_ulimit_without_require_): A new syntax check to ensure that require_ulimit_v_() is used iff required. * tests/misc/head-c.sh: Add missing call to require_ulimit_v_. * tests/rm/many-dir-entries-vs-OOM.sh: Likewise. * tests/split/r-chunk.sh: Remove non mandatory require_ulimit_ call. * tests/misc/sort-merge-fdlimit.sh: Likewise. * tests/cp/link-heap.sh: Adjust to renamed require_ulimit_v_. * tests/dd/no-allocate.sh: Likewise. * tests/misc/csplit-heap.sh: Likewise. * tests/misc/cut-huge-to-eol-range.sh: Likewise. * tests/misc/printf-surprise.sh: Likewise.
2013-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2012-09-05build: don't use recursive make for tests/ subdirectoryStefano Lattarini
* Makefile.am (SUBDIRS): Remove 'tests'. (include): The '$(top_srcdir)/tests/local.mk' file. (check-root): Remove this convenience target, it's no longer needed now that the "real" check-root target once in 'tests/Makefile' will land in the top-level makefile. * configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'. * tests/Makefile.am: Rename ... * tests/local.mk: ... like this, with a lot of adjustments. * tests/init.cfg: Move ... * init.cfg: ... here. This is necessary, for a limitation of the gnulib-provided 'tests/init.sh', which unconditionally look for 'init.cfg' in the $(srcdir) directory. * tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests', not in '$srcdir', and extend $PATH with './src', not with '../src'. * tests/Coreutils.pm: Adjust similarly. * tests/pr/pr-tests.pl ($pfx): Likewise.
2012-08-30tests: add .sh and .pl suffixes to shell and perl tests, respectivelyStefano Lattarini
Not only this shrinks the size of the generated Makefile (from > 6300 lines to ~3000), but will allow further simplifications in future changes. * tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'. (PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to $(LOG_COMPILER) for the time being. (TESTS, root_tests): Adjust as described. * All tests: Rename as described.
2012-08-19tests: avoid split/filter test failure on very low-mem systemJim Meyering
* tests/split/filter: Use xz -1 when compressing, to minimize memory usage. Otherwise, xz could fail due to insufficient virtual memory on a system with very little free memory.
2012-06-22split: ensure output doesn't overwrite inputPádraig Brady
* src/split.c (create): Check if output file is the same inode as the input file. * tests/split/guard-input: New test case. * tests/Makefile.am: Reference new test case. * NEWS: Mention the fix. Improved-by: Jim Meyering Reported-by: François Pinard
2012-03-10split: support an arbitrary number of split files by defaultJérémy Compostella
* src/split.c (next_file_name): If `suffix_auto' is true and the first suffix character is 'z', generate a new file file name adding `z' to the prefix and increasing the suffix length by one. (set_suffix_length): Disable auto suffix width in various cases. * tests/split/suffix-auto-length: Test it. * doc/coreutils.texi (split invocation): Mention it. * NEWS (Improvements): Likewise.
2012-02-20split: add the --additional-suffix optionJérémy Compostella
Add the --additional-suffix option, to append an additional static suffix to output file names. * src/split.c (next_file_name): Append suffix to output file names. (main): Handle new --additional-suffix option. * NEWS (New features): Mention it. * doc/coreutils.texi (split invocation): Mention it. * tests/split/additional-suffix: New file. Test --additional-suffix. * tests/Makefile.am (TESTS): Add it. Requested by Peng Yu, in bug 6554
2012-02-18split: support optional start value for --numeric-suffixesJérémy Compostella
Allow changing the --numeric-suffixes start number from the default of 0. * src/split.c (next_file_name): Initialize the suffix index and the output filename according to start value. (main): Check that the suffix length is large enough for the numerical suffix start value. * doc/coreutils.texi (split invocation): Mention it. * NEWS (New features): Mention it. * tests/split/numeric: New file. Test --numeric-suffixes[=FROM]. * tests/Makefile.am (TESTS): Reference the new test.
2012-01-27maint: use single copyright year rangeJim Meyering
Run "make update-copyright".
2012-01-09maint: adjust quoting: emit '...', not `...' in diagnosticsJim Meyering
* src/csplit.c (parse_repeat_count, extract_regexp): As above. * src/date.c (main): Likewise. * src/ls.c (decode_switches): Likewise. * src/od.c (decode_one_format, main): Likewise. * src/pathchk.c (no_leading_hyphen): Likewise. * src/pr.c (main, getoptarg): Likewise. * src/rm.c (diagnose_leading_hyphen): Likewise. * src/sort.c (key_warnings, incompatible_options, main): Likewise. * src/stat.c (print_esc_char): Print '\x', not `\x' in diagnostic. * src/test.c (main): Likewise. * src/touch.c (main): Likewise. * src/tr.c (build_spec_list, validate, append_range): Likewise. * tests/misc/mktemp: This is an unusual case, since the affected string contains only the ` of an `...' string. So we change the long ` to a lone '. * tests/pr/pr-tests: Manual quote adapting fix-up. * tests/ln/hard-to-sym: Likewise. * tests/split/suffix-length: Likewise. * tests/mv/part-fail: Likewise. * tests/misc/chcon: Likewise. * tests/misc/stat-printf: Likewise.
2012-01-09tests: more automated quote adjustmentJim Meyering
Relax initial regexp to match more instances, but add a filter to avoid some invalid conversions. Run this: git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \ -e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \ -e ' s/\`([^'\''"]*?'\'')/'\''$1/g' The last disjunct in the above (...) filter is to exempt any line that contains this string: '\'' With quoting like that, converting a ` to ' is likely to cause trouble, so we'll handle those manually. Here are three examples where the exemption is required: *': `link-to-dir/'\'': hard link not allowed for directory'*) ;; printf 'creating file `%s'\''\n' $f 'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
2012-01-09tests: adjust \`...' quoting to '...' to adapt to latest gnulibJim Meyering
Run this: git grep -l "\\\\\`[^']*'" tests \ |xargs perl -pi -e 's/\\\`(.*?'\'')/'\''$1/g
2012-01-05split: avoid failure due to leftover 'errno' valueBruno Haible
* src/split.c (lines_chunk_split): Fix logic bug that led to unwarranted failure of "split -n l/2 /dev/zero" on NetBSD 5.1. The same would happen when splitting a growing file, where open/lseek-end gives one size, but by the time we read, there is more data available. (bytes_chunk_extract): Likewise. * NEWS (Bug fixes): Mention this. * tests/split/l-chunk: The latter case was not exercised. Add code to do that. Bug introduced with the chunk-selecting feature in v8.7-25-gbe10739. Co-authored-by: Jim Meyering <meyering@redhat.com>
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-11-22tests: use "compare exp out", not "compare out exp"Jim Meyering
Likewise, when an empty file is expected, use "compare /dev/null out", not "compare out /dev/null". I.e., specify the expected/desired contents via the first file name. Prompted by a suggestion from Bruno Haible in http://thread.gmane.org/gmane.comp.gnu.grep.bugs/4020/focus=29154 Run these commands: git grep -l -E 'compare [^ ]+ exp' \ |xargs perl -pi -e 's/(compare) (\S+) (exp\S*)/$1 $3 $2/' git grep -l -E 'compare [^ ]+ /dev/null' \ |xargs perl -pi -e 's/(compare) (\S+) (\/dev\/null)/$1 $3 $2/' * tests/chgrp/no-x: As above. * tests/chmod/no-x: Likewise. * tests/chmod/silent: Likewise. * tests/chmod/thru-dangling: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/preserve-root: Likewise. * tests/cp/abuse: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-a-selinux: Likewise. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/proc-zero-len: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/thru-dangling: Likewise. * tests/dd/reblock: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/bigtime: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/files0-from-dir: Likewise. * tests/du/hard-link: Likewise. * tests/du/inacc-dest: Likewise. * tests/du/inacc-dir: Likewise. * tests/du/long-sloop: Likewise. * tests/du/max-depth: Likewise. * tests/du/move-dir-while-traversing: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/one-file-system: Likewise. * tests/du/slash: Likewise. * tests/du/trailing-slash: Likewise. * tests/install/strip-program: Likewise. * tests/ln/hard-backup: Likewise. * tests/ls/block-size: Likewise. * tests/ls/color-clear-to-eol: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/color-norm: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-free-symlinks: Likewise. * tests/ls/x-option: Likewise. * tests/misc/arch: Likewise. * tests/misc/cat-buf: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/chcon: Likewise. * tests/misc/csplit: Likewise. * tests/misc/df-P: Likewise. * tests/misc/fmt-long-line: Likewise. * tests/misc/groups-dash: Likewise. * tests/misc/groups-version: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/nl: Likewise. * tests/misc/od-N: Likewise. * tests/misc/od-multiple-t: Likewise. * tests/misc/od-x8: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-option: Likewise. * tests/misc/readlink-fp-loop: Likewise. * tests/misc/runcon-no-reorder: Likewise. * tests/misc/seq-long-double: Likewise. * tests/misc/sort-NaN-infloop: Likewise. * tests/misc/sort-benchmark-random: Likewise. * tests/misc/sort-debug-keys: Likewise. * tests/misc/sort-float: Likewise. * tests/misc/sort-merge-fdlimit: Likewise. * tests/misc/sort-unique-segv: Likewise. * tests/misc/stat-hyphen: Likewise. * tests/misc/stat-slash: Likewise. * tests/misc/stdbuf: Likewise. * tests/misc/sum-sysv: Likewise. * tests/misc/tac-2-nonseekable: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/tr-case-class: Likewise. * tests/misc/truncate-fail-diag: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/selinux: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/force: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self: Likewise. * tests/mv/into-self-2: Likewise. * tests/mv/into-self-3: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/mv/trailing-slash: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/fail-eacces: Likewise. * tests/rm/i-never: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/isatty: Likewise. * tests/rm/one-file-system: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm5: Likewise. * tests/rm/unread2: Likewise. * tests/rm/v-slash: Likewise. * tests/sample-test: Likewise. * tests/split/b-chunk: Likewise. * tests/split/fail: Likewise. * tests/split/l-chunk: Likewise. * tests/split/lines: Likewise. * tests/split/r-chunk: Likewise. * tests/split/suffix-length: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/follow-name: Likewise. * tests/tail-2/follow-stdin: Likewise. * tests/tail-2/pipe-f: Likewise. * tests/tail-2/pipe-f2: Likewise. * tests/tail-2/start-middle: Likewise. * tests/touch/60-seconds: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/relative: Likewise.
2011-09-01tests: split/l-chunk: avoid a portability issuePádraig Brady
* tests/split/l-chunk: Don't use the `test "$var"` idiom to test that var is set to something as that's not supported by all shells. The new style matches the usage is the rest of the test in any case. Reported by Bruno Haible on AIX 6.1 and 7.1
2011-08-08tests: complete the renaming framework_failure -> framework_failure_Stefano Lattarini
These changes were mostly mechanical, made by running the following command: git grep -lw framework_failure | grep -v ChangeLog \ | xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/' and then editing init.cfg and `tests/cp/cp-a-selinux' by hand. * tests/init.cfg (framework_failure): Remove, `framework_failure_' from init.sh should be used instead in the tests. Remove now-obsolete "FIXME" comment. (is_local_dir_, require_strace_, require_membership_in_two_groups_, require_sparse_support_, skip_if_mcstransd_is_running_, mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'. * Many test scripts: Likewise.
2011-06-17tests: remove skip_test_ function; use new skip_ insteadJim Meyering
* tests/init.cfg (skip_test_): Remove function. Use skip_ in place of skip_test_ everywhere else. * cfg.mk (sc_prohibit_skip_): Remove rule. * tests/**: Use skip_, not skip_test_, everywhere.
2011-05-28tests: move tests/misc/split-* into tests/split/...Jim Meyering
* tests/split/suffix-length: Rename from tests/misc/split-a. * tests/split/b-chunk: Rename from misc/split-bchunk. * tests/split/fail: Rename from tests/misc/split-fail. * tests/split/lines: Rename from tests/misc/split-l. * tests/split/l-chunk: Rename from tests/misc/split-lchunk. * tests/split/r-chunk: Rename from tests/misc/split-rchunk. * tests/Makefile.am (TESTS): Reflect renaming.
2011-05-26split: diagnose when --filter is used with a chunk numberPádraig Brady
* src/split.c (main): Exit with a diagnostic if --filter is specified along with a specific chunk number. * test/split/filter: Ensure this combination fails.
2011-05-26split: exit when we can no longer write to a --filterPádraig Brady
* src/split.c (bytes_split): Stop reading when we can no longer write to a child process. (lines_rr): Likewise. (lines_bytes_split): No change is made here since input is bounded by the original file size. * test/split/filter: Add test cases.
2011-05-26split: return success even if a --filter exitsPádraig Brady
src/split.c (main): Don't unblock SIGPIPE before cleanup, as then any pending signals will be sent and cause the main split process to exit with a non zero status (141). * test/split/filter: Add a test for this case.
2011-05-13tests: use skip_test_, not skip_Jim Meyering
skip_test_ emits its diagnostic both to FD 9 (tty), and to FD 2 (usually the log file), whereas init.sh's skip_ emits only to FD 9. Without that, the log is slightly less useful. * tests/cp/fiemap-2: Use skip_test_, not skip_. * tests/cp/fiemap-perf: Likewise. * tests/du/bigtime: Likewise. * tests/du/files0-from-dir: Likewise. * tests/du/move-dir-while-traversing: Likewise. * tests/init.sh: Likewise. * tests/misc/sort-stale-thread-mem: Likewise. * tests/misc/stat-nanoseconds: Likewise. * tests/mv/i-3: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/split/filter: Likewise. Prompted by a report from Pádraig Brady.
2011-05-07tests: don't fail the split --filter=CMD test if xz is not availableJim Meyering
* tests/split/filter: Skip if xz is not installed.
2011-05-06tests: test split's new --filter=CMD optionJim Meyering
* tests/Makefile.am (TESTS): Add split/filter. * tests/split/filter: New file.