summaryrefslogtreecommitdiff
path: root/tests/rm
AgeCommit message (Collapse)Author
2011-11-22tests: use compare, not "diff", in a few stray testsJim Meyering
* tests/install/basic-1: Use compare, not diff. * tests/mkdir/p-v: Likewise. * tests/mv/part-fail: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/touch/not-owner: Likewise.
2011-10-30tests: doc: fix stale comment in new rm/many-dir-entries-vs-OOMJim Meyering
2011-10-09tests: skip rather than failing when perl is not availableJim Meyering
* tests/df/total-verify: Use require_perl_, so that this test is skipped when perl is not available. * tests/rm/deep-2: Likewise, and fix wording in a comment. Reported by Bruno Haible.
2011-09-07tests: adjust PATH to include /sbin for mkfs-using testsBernhard Voelker
* tests/init.cfg (require_mkfs_PATH_): New function to test whether mkfs is in PATH, otherwise adding /sbin to PATH. Needed for distributions (OpenSuSE, Solaris) in which sudo does not include /sbin in PATH. * tests/cp/cp-a-selinux: Use require_mkfs_PATH_. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/sparse-fiemap: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/rm/read-only: Likewise.
2011-08-24maint: rename a testJim Meyering
Lesson: do not include details like "4 million" in a file name. * tests/rm/many-dir-entries-vs-OOM: Renamed from ... * tests/rm/4-million-entry-dir: ...this. * tests/Makefile.am (TESTS): Reflect renaming.
2011-08-24tests: adjust the new, very expensive rm test to be less expensiveJim Meyering
* tests/rm/4-million-entry-dir: Create only 200,000 files, rather than 4 million. The latter was overkill, and was too likely to fail due to inode exhaustion. Not everyone is using btrfs yet. Now that this test doesn't take so long, label it as merely "expensive", rather than "very expensive". Thanks to Bernhard Voelker for pointing out the risk of inode exhaustion.
2011-08-19rm, du, chmod, chown, chgrp: use much less memory for large directoriesJim Meyering
For details, see the gnulib commit, http://git.sv.gnu.org/cgit/gnulib.git/commit/?id=47cb657e * tests/rm/4-million-entry-dir: New test. * tests/Makefile.am (TESTS): Add it. * NEWS (Bug fixes): Mention it. * gnulib: Update to latest to get the required fts fixes.
2011-08-08tests: complete the renaming framework_failure -> framework_failure_Stefano Lattarini
These changes were mostly mechanical, made by running the following command: git grep -lw framework_failure | grep -v ChangeLog \ | xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/' and then editing init.cfg and `tests/cp/cp-a-selinux' by hand. * tests/init.cfg (framework_failure): Remove, `framework_failure_' from init.sh should be used instead in the tests. Remove now-obsolete "FIXME" comment. (is_local_dir_, require_strace_, require_membership_in_two_groups_, require_sparse_support_, skip_if_mcstransd_is_running_, mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'. * Many test scripts: Likewise.
2011-06-17tests: remove skip_test_ function; use new skip_ insteadJim Meyering
* tests/init.cfg (skip_test_): Remove function. Use skip_ in place of skip_test_ everywhere else. * cfg.mk (sc_prohibit_skip_): Remove rule. * tests/**: Use skip_, not skip_test_, everywhere.
2011-04-28tests: write skip explanation from perl scripts also to outer stderrJim Meyering
* tests/CuSkip.pm (skip): New file/module/function, to help the perl test scripts "skip" a test consistently, emitting a diagnostic both into the log file and into the outermost stderr stream that is more likely to be seen by a human. * tests/check.mk (TESTS_ENVIRONMENT): Add -MCuSkip. * tests/misc/date-next-dow: Use CuSkip::skip in place of warn+exit-77. * tests/misc/tty-eof: Likewise. * tests/misc/uniq: Likewise. * tests/rm/fail-eperm: Likewise. * tests/misc/md5sum-newline: Likewise. Also, s/program_name/ME/. * tests/misc/ls-misc (setuid_setup, main): Likewise. * tests/misc/pwd-long: Likewise, and add -I"$abs_srcdir" -MCuSkip to the $PERL invocation command. Inspired by a request from Bruno Haible regarding misc/tty-eof: http://debbugs.gnu.org/8570
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-12-28coreutils: keep lines within 80-column limitsPaul Eggert
* cfg.mk (LINE_LEN_MAX, FILTER_LONG_LINES): New macros. (sc_long_lines): New rule. * HACKING: Use shorter URLs to the same material. * doc/Makefile.am, doc/coreutils.texi, m4/boottime.m4: * man/help2man, man/stdbuf.x, src/Makefile.am, src/cat.c, src/copy.c: * src/cp.c, src/dd.c, src/df.c, src/du.c, src/groups.c, src/install.c: * src/ls.c, src/md5sum.c, src/mv.c, src/od.c, src/pinky.c, src/ptx.c: * src/readlink.c, src/remove.c, src/rmdir.c, src/setuidgid.c: * src/sort.c, src/tail.c, src/touch.c, tests/Coreutils.pm: * tests/cp/existing-perm-race, tests/cp/perm, tests/cp/preserve-gid: * tests/du/2g, tests/du/long-from-unreadable, tests/init.sh: * tests/install/basic-1, tests/ls/nameless-uid: * tests/ls/readdir-mountpoint-inode, tests/misc/chroot-credentials: * tests/misc/cut, tests/misc/date, tests/misc/join, tests/misc/md5sum: * tests/misc/sha1sum, tests/misc/sha224sum, tests/misc/sort: * tests/misc/sort-continue, tests/misc/sort-files0-from: * tests/misc/sort-rand, tests/misc/stdbuf, tests/misc/tr: * tests/misc/uniq, tests/mv/atomic, tests/mv/part-fail: * tests/mv/part-symlink, tests/mv/sticky-to-xpart, tests/pr/pr-tests: * tests/rm/fail-2eperm, tests/rm/interactive-always: Reformat to fit within 80 columns. * doc/Makefile.am (BAD_POSIX_PERL): New macro. * doc/coreutils.texi: Reword slightly, to make menus and index lines shorter. * src/md5sum.c: Redo --help output so that it fits within 79 columns, since that's a bit more portable and all the other --help strings fit in 79 columns.
2010-11-17tests: substitute the single-program $VERBOSE/--version usesJim Meyering
Automatically make all of the changes like this: -test "$VERBOSE" = yes && chgrp --version +print_ver_ chgrp git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \ 's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
2010-11-17tests: convert 'if test "$VERBOSE" = yes; then' to test ... &&Jim Meyering
2010-11-17tests: convert first batch of tests from test-lib.sh to init.shJim Meyering
Initially, I did this, git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script' but that line would have been much longer than the maximum permitted by coreutils' commit hook, and wasn't readable besides, so here's a more readable version: lhs=$(printf '%s\\n' \ 'if test "$VERBOSE" = yes; then' \ ' set -x' \ ' touch --version' \ 'fi' \ '' \ '. $srcdir/test-lib.sh' \ | sed 's/\$/\\\$/g;s/touch/(\\w+)/') rhs=$(printf '%s\\n' \ '. "${srcdir=.}/init.sh"; path_prepend_ ../src' \ 'test "$VERBOSE" = yes && FIXME --version' \ | sed 's/\$/\\\$/g;s/FIXME/\$1/') git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
2010-09-07tests: make various timeouts more robustPádraig Brady
* tests/init.cfg (retry_delay_): Describe the backoff method used. * tests/ls/readdir-mountpoint-inode: Add a timeout to the stat call to eliminate the chance of hangups. * tests/mv/i-3: Change the timeout required to pass from 1 second to a range of .1s - 3.1s. * tests/rm/dangling-symlink: Likewise.
2010-01-01maint: update all FSF copyright year lists to include 2010Jim Meyering
Use this command: git ls-files | grep -v COPYING \ | xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \ build-aux/update-copyright
2009-12-19rm: fix --one-file-system regression due to fts conversionPádraig Brady
* src/remove.c (rm_fts): Fix incorrect comparison of device and inode numbers. * tests/rm/one-file-system2: Add a separate test so that it can be run as a normal user (It doesn't need to mount). * tests/Makefile.am: Reference it. * NEWS: Mention the fix. Reported by Jan Larres.
2009-12-01rm: fix empty-name bug introduced with conversion to use ftsJim Meyering
While "rm ''" would properly fail, "rm F1 '' F2" would fail to remove F1 and F2, due to the empty string argument. This bug was introduced on 2009-07-12, via commit 4f73ecaf, "rm: rewrite to use fts". * gnulib: Update to latest, for fixed fts.c. * NEWS (Bug fixes): Describe it. * tests/rm/empty-name: Adjust for changed diagnostic. (mk_file): Define, copied from misc/ls-misc. (empty-name-2): New test, for today's fix. * lib/xfts.c (xfts_open): Reflect the change in fts_open, now that it no longer fails immediately when one argument is the empty string. Assert that the bit flags were not the cause of failure. * po/POTFILES.in: Remove xfts.c. * THANKS: Update. Reported by Ladislav Hagara.
2009-11-20maint: correct comments in test scriptsJim Meyering
* tests/misc/pwd-long: Fix spelling of cygwin1.dll in comment. * tests/rm/fail-eperm: Likewise. Reported by Eric Blake.
2009-11-19tests: avoid spurious failures due to insecure directory in PATHJim Meyering
These tests perform no PATH search, and used to simply delete PATH from the environment. However, that is not portable, as seen on Cygwin, where cygwin.dll must be resolvable via PATH when starting a sub-shell. With commit 0cc04241, we took the alternate approach of untainting the incoming $ENV{PATH}, but that fails when it contains an other-writable directory. Instead, now we hard code it to '/bin:/usr/bin'. * tests/misc/pwd-long: Hard code $ENV{PATH} to a safe value. * tests/rm/fail-eperm: Likewise. Reported by Gilles Espinasse, Andreas Schwab, and Bauke Jan Douma.
2009-11-03tests: rm: add test for today's change in behaviorJim Meyering
* tests/Makefile.am (root_tests): Add rm/read-only to the list. * tests/rm/read-only: New file.
2009-10-30tests: factor 350 fail=0 initializations into test-lib.shJim Meyering
Run this command to remove the factored-out "fail=0" lines. perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$') * tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts. * tests/...: nearly all bourne shell scripts Suggested by Eric Blake.
2009-10-27tests: fix PATH problems on cygwinEric Blake
* tests/misc/sort-compress: Remove non-portable over-restriction of PATH; besides, commit 3ea177e changed sort to no longer default to gzip. * tests/rm/fail-eperm: Untaint, rather than clear, PATH. * tests/misc/pwd-long: Likewise. Also skip test if long path cannot be created. (normalize_to_cwd_relative): Use eq rather than ==, since cygwin perl doesn't properly handle 64-bit ino_t numerically.
2009-10-26tests: rm/one-file-system: work around umount failureJim Meyering
* tests/rm/one-file-system (cleanup_): Unmount a/b, rather than "$other_partition_tmpdir", to accommodate those who link /etc/mtab to /proc/mounts. Reported by Gilles Espinasse in http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/18508
2009-09-11rm: rewrite to use ftsJim Meyering
* remove.c: Don't include "unlinkdir.h"; no longer used. Do not include <setjmp.h> or "cycle-check.h". Likewise. Include "xfts.h". (dir_name, dir_len): Remove definitions. (CONSECUTIVE_READDIR_UNLINK_THRESHOLD): Likewise. (INODE_SORT_DIR_ENTRIES_THRESHOLD, NEED_REWIND, D_TYPE): Likewise. (struct dirstack_state, Dirstack_state): Likewise. (g_buf, g_n_allocated): Remove declarations. (hash_freer, hash_compare_strings, rm_malloc): Remove functions. (rm_free, push_dir, top_dir, pop_dir, right_justify): Likewise. (full_filename0, xfull_filename, full_filename_): Likewise. (AD_stack_height, AD_stack_top, AD_stack_pop, AD_stack_clear): Likewise. (obstack_init_minimal, ds_init, ds_clear, ds_free): Likewise. (AD_pop_and_chdir, AD_ensure_initialized, AD_mark_helper): Likewise. (AD_mark_as_unremovable, AD_mark_current_as_unremovable): Likewise. (AD_push_initial, AD_push, AD_push, AD_is_removable): Likewise. (write_protected_non_symlink): Change 3rd parameter from dirstack_state "ds" to full_name. (prompt): Adjust parameters. Now, state comes from FTS/FTSENT pair. Those replace fd_cwd and "ds". Remove "filename". Remove pdirent_type in favor of new "is_dir" parameter. Rename is_empty to is_empty_p. (DO_RMDIR, DO_UNLINK): Remove definitions. (remove_entry, fd_to_subdirp, compare_ino): Remove functions. (dirent_count, dirent_inode_sort_may_be_useful): Likewise. (preprocess_dir): Likewise. (fts_skip_tree, mark_ancestor_dirs, excise, rm_fts): New functions. (remove_cwd_entries, remove_dir, rm_1): Remove functions. (rm): Rewrite as a simple loop calling fts_read and dispatching each entry via rm_fts. * src/rm.c (main): Adapt to new signature of rm(). * bootstrap.conf (gnulib_modules): Remove unlinkdir, no longer used. * src/Makefile.am (sc_tight_scope): Also recognize an extern "enum" declaration. * tests/rm/empty-name: Adjust expected output to match new diagnostic. * NEWS (Improvements): Mention it.
2009-08-25global: convert indentation-TABs to spacesJim Meyering
Transformed via this shell code: t=$'\t' git ls-files \ | grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \ | grep -vE 'tests/pr/|help2man' \ | xargs grep -lE "^ *$t" \ | xargs perl -MText::Tabs -ni -le \ '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
2009-07-30tests: new function: require_openat_support_Jim Meyering
* tests/rm/inaccessible: Factor out openat-support-detection code... * tests/test-lib.sh (require_openat_support_): ...into this new function.
2009-06-23maint: update all Copyright year lists to include 2009Jim Meyering
2009-05-05tests: rm/one-file-system: umount more reliablyJim Meyering
* tests/rm/one-file-system: Run umount via trap, so it runs also upon irregular termination.
2009-03-26tests: mark the rm/ext3-perf test as "very" expensiveJim Meyering
* tests/rm/ext3-perf: Relegate this test to the very_expensive category, since it is failing too often for me, when run in parallel (-j4) with other disk-hammering tests. This test fails when it takes too long, so the fact that it fails under pressure is an inconvenience more than a real problem.
2009-03-06tests: fix just-introduced typo in rm/ext3-perfJim Meyering
* tests/rm/ext3-perf: Fix typo in commit 2b1e6636bea, 2009-02-27 "tests: rm/ext3-perf: relax this test".
2009-03-02tests: rm/ext3-perf: relax this testJim Meyering
* tests/rm/ext3-perf: If set-up takes too long, use the set-up time as the removal time limit. Otherwise, a parallel "make check" would usually fail when run with RUN_VERY_EXPENSIVE_TESTS=yes.
2008-10-01tests: use our new timeout programJim Meyering
* tests/rm/ext3-perf: Also, record set-up duration and FS type.
2008-09-27rm -r: avoid O(n^2) performance for a directory with very many entriesJim Meyering
This enhancement works around a problem that is specific to at least ext3 and ext4 file systems. With them, it would take hours to remove a two-million-entry directory. RAM-backed file systems (tmpfs) are not affected, since there is no seek penalty. * remove.c (rm_malloc, rm_free, compare_ino): New functions. (dirent_count, preprocess_dir): New function. [struct readdir_data]: New struct. (remove_cwd_entries): Call preprocess_dir. * tests/rm/ext3-perf: New file. Test for the performance fix. * NEWS: mention the new feature
2008-09-10tests: use "Exit $fail", not (exit $fail); exit $failJim Meyering
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63 * tests/**: Convert all uses: This restrictive change converted the vast majority: git grep -l '^(exit \$fail); exit \$fail$' \ | xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/' And this did the rest, plus a few undesirable ones, so I manually backed out the changes to ChangeLog-* and build-aux/check.mk: git grep -l -E '\(exit [^)]+\); exit ' \ | xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
2008-06-13skip (don't fail) root-only tests for common set-up failuresJim Meyering
Address 2 of 4 failures reported by Jarod Wilson in http://bugzilla.redhat.com/442352. More details here: http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13803 * tests/cp/cp-a-selinux: Skip the test if "mkfs -t ext2" fails. * tests/rm/fail-2eperm: Skip the test if "rm" is not accessible.
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-05-27prefer abs_srcdir over abs_top_srcdir, ...Jim Meyering
so that e.g., tests/* may refer to absolute names without hard-coding the name of the containing directory (tests/, here). * tests/check.mk (TESTS_ENVIRONMENT): Define abs_srcdir. * tests/pr/pr-tests: Use $abs_srcdir/pr not $abs_top_srcdir/tests/pr. * tests/chmod/c-option: Use $abs_srcdir, not $abs_top_srcdir/tests. * tests/cp/cp-parents: Likewise. * tests/mkdir/parents: Likewise. * tests/mkdir/perm: Likewise. * tests/mv/acl: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/hard-link-1: Likewise. * tests/mv/into-self-2: Likewise. * tests/mv/leak-fd: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/part-hardlink: Likewise. * tests/mv/part-rename: Likewise. * tests/mv/part-symlink: Likewise. * tests/mv/partition-perm: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/mv/to-symlink: Likewise. * tests/rm/one-file-system: Likewise. * tests/sample-test: Likewise.
2008-05-17tests: remove ugly /bin/sh wrapper around each perl-based test scriptJim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Save and restore TMPDIR around envvar-check, so that the few scripts that require $TMPDIR don't fail. This is also good to let a user's default TMPDIR setting be used e.g., in the search for an 'other-partition'. FIXME: this is pretty ugly. maybe undo it and find a better way. (TESTS_ENVIRONMENT): Invoke perl scripts with $(PERL), and use -T if the script requires that. Otherwise, use $(SHELL). * tests/misc/md5sum-newline: Create a file whose name contains a newline in Perl (resort to using "system", since open refuses). Fix old brokenness exposed by this change: * tests/du/files0-from: Correct test not to rely on stdin being attached to a non-tty. * tests/misc/sort (3g, 3h, 3i): Likewise: add explicit empty input file. Avoid warnings about using qw()-around-commas. * tests/rm/fail-eperm: Now that this test is run from a temporary subdirectory, adjust the full name of the "rm" program we're going to run. Change #!/bin/sh to #!/usr/bin/perl, and factor out the few lines of boilerplate code to invoke perl. Do not "require 5.00x"; a configure-time Perl test handles that * tests/dd/skip-seek: * tests/misc/base64: * tests/misc/basename: * tests/misc/cut: * tests/misc/date: * tests/misc/dircolors: * tests/misc/dirname: * tests/misc/expand: * tests/misc/expr: * tests/misc/factor: * tests/misc/fmt: * tests/misc/fold: * tests/misc/head: * tests/misc/head-elide-tail: * tests/misc/join: * tests/misc/ls-misc: * tests/misc/md5sum: * tests/misc/md5sum-newline: * tests/misc/mktemp: * tests/misc/od: * tests/misc/paste: * tests/misc/pr: * tests/misc/printf-cov: * tests/misc/seq: * tests/misc/sha1sum: * tests/misc/sha1sum-vec: * tests/misc/sha224sum: * tests/misc/sha256sum: * tests/misc/sha384sum: * tests/misc/sha512sum: * tests/misc/sort-merge: * tests/misc/stat-printf: * tests/misc/sum: * tests/misc/tac: * tests/misc/tail: * tests/misc/test: * tests/misc/test-diag: * tests/misc/tr: * tests/misc/tsort: * tests/misc/tty-eof: * tests/misc/unexpand: * tests/misc/uniq: * tests/misc/wc: * tests/misc/wc-files0-from: * tests/misc/xstrtol: * tests/mv/i-1: * tests/pr/pr-tests: * tests/rm/empty-name: * tests/rm/fail-eperm: * tests/rm/unreadable:
2008-05-06tests: hoist the sourcing of "lang-default"Jim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ... ... rather than in each of 100+ test scripts. * tests/chgrp/basic: * tests/chgrp/no-x: * tests/chmod/c-option: * tests/chmod/no-x: * tests/chmod/setgid: * tests/chmod/thru-dangling: * tests/chmod/umask-x: * tests/chmod/usage: * tests/chown/basic: * tests/chown/deref: * tests/chown/preserve-root: * tests/cp/abuse: * tests/cp/acl: * tests/cp/backup-is-src: * tests/cp/cp-a-selinux: * tests/cp/cp-i: * tests/cp/cp-mv-backup: * tests/cp/deref-slink: * tests/cp/fail-perm: * tests/cp/into-self: * tests/cp/link-preserve: * tests/cp/preserve-gid: * tests/cp/same-file: * tests/cp/slink-2-slink: * tests/cp/special-f: * tests/cp/symlink-slash: * tests/cp/thru-dangling: * tests/du/basic: * tests/du/hard-link: * tests/du/inacc-dest: * tests/du/long-sloop: * tests/du/no-x: * tests/install/basic-1: * tests/ln/hard-backup: * tests/ln/sf-1: * tests/ls/file-type: * tests/ls/infloop: * tests/ls/nameless-uid: * tests/ls/rt-1: * tests/ls/stat-failed: * tests/ls/symlink-slash: * tests/ls/x-option: * tests/misc/chcon: * tests/misc/chcon-fail: * tests/misc/csplit: * tests/misc/df-P: * tests/misc/groups-dash: * tests/misc/groups-version: * tests/misc/nohup: * tests/misc/printf-surprise: * tests/misc/runcon-no-reorder: * tests/misc/selinux: * tests/misc/split-a: * tests/misc/split-fail: * tests/misc/tac-continue: * tests/misc/wc-files0: * tests/mkdir/p-v: * tests/mkdir/selinux: * tests/mv/acl: * tests/mv/backup-dir: * tests/mv/backup-is-src: * tests/mv/childproof: * tests/mv/diag: * tests/mv/dir2dir: * tests/mv/dup-source: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/hard-verbose: * tests/mv/i-2: * tests/mv/i-3: * tests/mv/i-4: * tests/mv/i-5: * tests/mv/i-link-no: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/mv-special-1: * tests/mv/part-fail: * tests/mv/part-symlink: * tests/mv/partition-perm: * tests/mv/perm-1: * tests/mv/reply-no: * tests/mv/sticky-to-xpart: * tests/mv/update: * tests/rm/cycle: * tests/rm/dir-no-w: * tests/rm/dir-nonrecur: * tests/rm/fail-2eperm: * tests/rm/fail-eacces: * tests/rm/inaccessible: * tests/rm/interactive-always: * tests/rm/interactive-once: * tests/rm/isatty: * tests/rm/one-file-system: * tests/rm/r-1: * tests/rm/r-2: * tests/rm/rm1: * tests/rm/rm2: * tests/rm/rm3: * tests/rm/rm4: * tests/rm/rm5: * tests/rm/unread2: * tests/rm/v-slash: * tests/touch/fail-diag: * tests/touch/not-owner:
2008-05-06fix typo in comments: s/ouput/output/Jim Meyering
adjust spelling in that same comment: s/localisation/localization/
2008-04-27tests: move another file (expensive) into test-lib.shJim Meyering
* tests/expensive: Remove file. Move contents into ... * tests/test-lib.sh (expensive_): ...here. New function. * tests/du/fd-leak: Update caller to use the new function. * tests/mv/leak-fd: Likewise. * tests/rm/hash: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/Makefile.am (EXTRA_DIST): Remove its name.
2008-04-21tests: skip (don't fail) rm/one-file-system when mount --bind failsJim Meyering
* tests/rm/one-file-system: Reported by Allen Hewes.
2008-04-21tests: adjust perl -I to use $top_srcdir/tests, not $srcdir/..Jim Meyering
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-03-31"rm -r DIR" would mistakenly prompt about very long namesJim Meyering
* src/remove.c (write_protected_non_symlink): Return 0(-1) when euidaccess_stat pronounces a writable(not-writable) file, not -1(0). * tests/rm/deep-2: New file. Test for the above-fixed bug. * tests/rm/Makefile.am (TESTS): Add deep-2. Discovered while reviewing this change: http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13071
2008-02-25Fix test failure where rm would appear to succeed incorrectly.Bob Proulx
* tests/rm/fail-eperm: Ignore files that were opportunistically chosen to test permission failures but disappear before we can finish the test.
2008-02-11* tests/rm/inaccessible: Source test-lib.sh *before* using skip_test_.Jim Meyering
Reported by Peter Fales. Signed-off-by: Jim Meyering <meyering@redhat.com>
2008-02-09tests: rm/fail-eperm: require-non-root in perl, not shJim Meyering
Since it creates no temporaries and since it requires non-root, do the require-non-root bit in perl, rather than using test-lib.sh.
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-18 22:34:00 +0000