| Age | Commit message (Collapse) | Author |
|---|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
* tests/misc/ls-time.sh: Skip the test rather than ERROR
when `touch -m -d ...` fails (Hurd).
* tests/tail-2/follow-stdin.sh: Avoid false FAILs by ignoring
the variances in sterror output.
* tests/rm/rm-readdir-fail.sh: Likewise. Also avoid ERRORs
on systems that don't define _D_EXACT_NAMELEN.
|
|
* tests/rm/rm-readdir-fail.sh: ASAN correctly indicated
that fts was writing to freed memory. This was because
we reused a single dirent in our readdir() test wrapper.
Since fts was deallocating those dirents, we now get
a new dirent for each call to our readdir wrapper.
|
|
On BSD /bin/sh it was seen that unexported env vars passed to
returns_() would not be propagated to the wrapped command.
* cfg.mk (sc_prohibit_env_returns): Add a syntax check to disallow.
* tests/misc/csplit-io-err.sh: Rearrange to export vars in a subshell.
* tests/rm/rm-readdir-fail.sh: Likewise.
* tests/misc/nohup.sh: Export and unset vars around returns_.
* tests/misc/printenv.sh: Likewise.
Reported by Assaf Gordon
|
|
* src/rm.c (main): Ensure the full --no-preserve-root
option is specified, rather than allowing --n etc.
* tests/rm/r-root.sh: Add a test case.
* NEWS: Mention the change in behavior.
Improved by Jim Meyering.
Fixes http://bugs.gnu.org/24604
|
|
* tests/rm/rm-readdir-fail.sh: Since we use the returned dirent
from the readdir wrapper it must be the correct type and not
just cast. Therefore setup so that we only have to define a
wrapper for readdir(), which works appropriately on 32 and 64 bit.
Issue reported by Bernhard Voelker, where rm was seen to invoke
rmdir() on invalid file names.
|
|
* tests/rm/rm-readdir-fail.sh: A new test to simulate readdir()
failing immediately or after returning a few entries, and verifying
that rm does the appropriate thing.
This was initially reported at:
http://bugzilla.opensuse.org/show_bug.cgi?id=984910
where it was mentioned that readdir() may fail
when an NFS server has a poor readdir cookie implementation.
|
|
* tests/rm/rm1.sh: Also remove the group write bit which
was required on one NFS setup at least. Note u-w was
enough to deny file creation, g-w was also required to
deny file removal.
* tests/rm/cycle.sh: Likewise.
* tests/mv/perm-1.sh: Likewise.
|
|
* tests/rm/dangling-symlink.sh: The effective delay was only
1.5s. So delay before the operation, and increase the iteration
count by 1 to increase the delay to 6.3s. This failure was
noticed once on a FreeBSD 10.2 x86_64 virtual machine.
* tests/dd/stats.sh: Remove quotes on sleep argument
to ensure arguments are accumulated appropriately.
* tests/du/move-dir-while-traversing.sh: sleep before operation,
to increase the effective delay from 1.6s to 3.2s.
* tests/tail-2/flush-initial.sh: Likewise.
* tests/tail-2/pipe-f2.sh: Sleep first so that the effective delay
matches the commented value.
|
|
* tests/rm/r-root.sh: This test was seen to ERROR due to
sed input not having a terminating '\n'. Therefore just skip
with diagnostics upon failure to adjust the error output with sed.
Reported by Assaf Gordon.
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
Quote file names using the "shell-escape" or "shell-escape-always"
methods, which quote as appropriate for most shells,
and better support copy and paste of presented names.
The "always" variant is used when the file name is
embedded in an error message with surrounding spaces.
* cfg.mk (sc_error_shell_quotes): A new syntax check rule
to suggest quotef() where appropriate.
(sc_error_shell_always_quotes): Likewise for quoteaf().
* src/system.h (quotef): A new define to apply shell quoting
when needed. I.E. when shell character or ':' is present.
(quoteaf): Likewise, but always quote.
* src/*.c: Use quotef() and quoteaf() rather than quote()
where appropriate.
* tests/: Adjust accordingly.
|
|
* tests/rm/r-root.sh: Skip the test if there are gdb warnings
that will impact further stderr checks. For example some
buggy gdb versions may report "Got object file from memory
but can't read symbols: File truncated". Also fix an incorrect
stderr check from the previous change.
Reported by Bernhard Voelker.
|
|
* tests/rm/r-root.sh: Use gdb rather than timeout(1) as the
last resort protection against unlinkat() calls. The timeout
of 2s was susceptible to false positives under load, and
gdb is stronger protection in any case. We remove the
"expensive" tag on this test also since it should be robust.
Reported by Jim Meyering.
|
|
When configured with either 'symlinks' or 'shebangs' as value for
the --enable-single-binary option, tests based on `ulimit -v` are
skipped. The reason is that the multicall 'coreutils' binary requires
much more memory due to shared libraries being loaded, and the size of
the 'date' binary (~290KiB) compared to the multicall binary (~5MiB),
of course. Finally, in the case of 'shebangs', the starting shell
requires more memory, too
Instead of using hard-coded values for the memory limit, use an
adaptive approach: first determine the amount of memory for a similar,
yet more trivial invocation of the command, and then do the real test
run using that limit (plus some buffer in some cases).
* init.cfg (require_ulimit_v_): Remove function.
(get_min_ulimit_v_): Add function to determine the minimum memory limit
required for a given command in an adaptive way.
* cfg.mk (sc_prohibit_test_ulimit_without_require_): Change the name
of the above function in the syntax-check rule.
* tests/cp/link-heap.sh: Use the above function to determine the
minimum memory required to run a command simpler than in the real test
run. Use that limit plus a buffer there. While at it, change to list
of commands in the subshell to fail also if the beginning `ulimit -v`
fails.
* tests/dd/no-allocate.sh: Likewise.
* tests/misc/csplit-heap.sh: Likewise.
* tests/misc/cut-huge-range.sh: Likewise.
* tests/misc/head-c.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise - doing it separately
for each program under test.
|
|
Since non interactive shells don't generally set $SHELL,
its value is propagated through the tests and may cause issues;
for example if $SHELL implicitly adjusts $PATH when run.
Instead we set $SHELL to that determined by the posix-shell module,
and use that consistently for all test sub scripts,
including those created thorugh the `split --filter` command.
* tests/local.mk: Explicitly set $SHELL to $(PREFERABLY_POSIX_SHELL)
which defaults to $CONFIG_SHELL and thus usually /bin/sh.
* tests/envvar-check: Remove bash environment variables with
side effects, in case /bin/bash was selected for $SHELL.
* tests/misc/help-version.sh: Remove redundant initialization of $SHELL.
* tests/install/strip-program.sh: Use $SHELL for sub script.
* tests/misc/sort-compress-hang.sh: Likewise.
* tests/misc/sort-compress-proc.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise.
* tests/misc/timeout-group.sh: Likewise.
* tests/rm/fail-eperm.xpl: Remove redundant elision of bash env vars.
* tests/misc/pwd-long.sh: Likewise.
|
|
The LD_PRELOAD checks by -fsanitize=address are overly strict:
https://groups.google.com/forum/#!topic/address-sanitizer/jEvOJgkDqQk
A workaround is to first export LD_PRELOAD=libasan.so.2
The tests below are adjusted so that workaround is not discarded.
* tests/cp/no-ctx.sh: Append to $LD_PRELOAD.
* tests/df/no-mtab-status.sh: Likewise.
* tests/df/skip-duplicates.sh: Likewise.
* tests/ls/getxattr-speedup.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/cp/nfs-removal-race.sh: Likewise. Also check that
LD_PRELOAD is effective to aid future maintainability
and avoid false failure if libasan.so.2 is not preloaded.
|
|
Reap background processes so that:
- Stray processes aren't left on the system
- Files aren't held open causing deletion issues on NFS
- Partitions used to run the tests from can be unmounted
* tests/tail-2/F-vs-missing.sh: Add the `kill && wait` of the
background $pid(s) to cleanup_().
* tests/tail-2/F-vs-rename.sh: Likewise.
* tests/tail-2/f-vs-rename.sh: Likewise.
* tests/tail-2/append-only.sh: Likewise.
* tests/tail-2/assert-2.sh: Likewise.
* tests/tail-2/assert.sh: Likewise.
* tests/tail-2/flush-initial.sh: Likewise.
* tests/tail-2/inotify-hash-abuse.sh: Likewise.
* tests/tail-2/inotify-hash-abuse2.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: Likewise.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/pid.sh: Likewise.
* tests/tail-2/pipe-f2.sh: Likewise.
* tests/tail-2/retry.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/tail-n0f.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
* tests/cp/existing-perm-race.sh: Likewise.
* tests/cp/file-perm-race.sh: Likewise.
* tests/cp/parent-perm-race.sh: Likewise.
* tests/cp/sparse-to-pipe.sh: Likewise.
* tests/dd/stats.sh: Likewise.
* tests/du/move-dir-while-traversing.sh: Likewise.
* tests/misc/cat-buf.sh: Likewise.
* tests/misc/help-version.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
* tests/misc/sort-compress-proc.sh: Likewise.
* tests/misc/sort-spinlock-abuse.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/misc/timeout-group.sh: Likewise.
* tests/mv/i-3.sh: Likewise.
* tests/rm/dangling-symlink.sh: Likewise.
* tests/rm/isatty.sh: Likewise.
* cfg.mk (sc_prohibit_test_background_without_cleanup_):
A new syntax-check to ensure cleanup_() is defined
when background tasks are created in a test.
|
|
To align with all other places (and correct grammar), change all
upper-case "I.E." to "I.e.". Furthermore, ensure that "i.e." is
followed by a comma. Finally, ensure to use a double-space before
"I.e.," at the beginning of a sentence.
The following was used to change all offending uses (apart from
old ChangeLog files):
$ git grep -liF 'i.e.' \
| xargs sed -i \
-e 's/I\.E\./I.e./g' \
-e 's/\. \(I\.e\.\)/. \1/g' \
-e 's/\([Ii]\.e\.\)\( \)/\1,\2/g' \
-e 's/\([Ii]\.e\.\)$/\1,/g'
* cfg.mk (sc_prohibit_uppercase_id_est): Add new rule.
(sc_ensure_double_space_after_dot_before_id_est): Likewise.
(sc_ensure_comma_after_id_est): Likewise.
(old_NEWS_hash): Refresh hash via "make update-NEWS-hash".
* NEWS: Change use of "id est" abbreviation via the above command.
* README: Likewise.
* README-prereq: Likewise.
* doc/coreutils.texi: Likewise.
* gl/lib/rand-isaac.c: Likewise.
* gl/lib/tempname.c.diff: Likewise.
* man/stdbuf.x: Likewise.
* src/cat.c: Likewise.
* src/copy.c: Likewise.
* src/copy.h: Likewise.
* src/cp.c: Likewise.
* src/cut.c: Likewise.
* src/dd.c: Likewise.
* src/df.c: Likewise.
* src/fiemap.h: Likewise.
* src/longlong.h: Likewise.
* src/ls.c: Likewise.
* src/numfmt.c: Likewise.
* src/pr.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/split.c: Likewise.
* tests/Coreutils.pm: Likewise.
* tests/df/df-symlink.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/init.sh: Likewise.
* tests/ls/color-norm.sh: Likewise.
* tests/misc/basename.pl: Likewise.
* tests/misc/ls-misc.pl: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/shred-exact.sh: Likewise.
* tests/misc/sort.pl: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
|
|
When some program produces unexpected output, that use of
compare-vs-/dev/null will ensure that the surprising output is
printed in the test's output. With "test -s err" only, one
would have to instrument and rerun in order to see the offending
output.
* cfg.mk (sc_prohibit_and_fail_1): Exempt 'compare' from this check.
* tests/dd/misc.sh: Change "tests -s ... || fail=1" to
"compare /dev/null ... && fail=1".
* tests/misc/nice.sh: Likewise.
* tests/rm/read-only.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
Suggested by Jim Meyering in
http://lists.gnu.org/archive/html/coreutils/2015-01/msg00042.html
|
|
Many tests use `program ... && fail=1` to ensure expected
error situations are indicated. However that would mask
an unexpected exit (like a crash). Therefore explicitly
check the expected exit code.
Note where error messages are also verified, the extra
protection is not added.
* tests/init.sh (returns_): A new helper function to
check the return code of a command, and used
throughout the tests.
* cfg.mk (sc_prohibit_and_fail_1): Add a syntax check
to avoid new instances of this issue.
|
|
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
|
|
Since commit v8.22-94-g99960ee, chroot(1) skips the chroot(2) syscall
for "/" arguments (and synonyms). The problem is that it also skips
the following chdir("/") call in that case. The latter breaks existing
scripts which expect "/" to be the working directory inside the chroot.
While the first part of the change - i.e., skipping chroot("/") - is
okay for consistency with systems where it might succeed for a non-root
user, the second part might be malicious, e.g.
cd /home/user && chroot '/' bin/foo
In the "best" case, chroot(1) could not execute 'bin/foo' with ENOENT,
but in the worst case, chroot(1) would execute '/home/user/bin/foo' in
the case that exists - instead of '/bin/foo'.
Revert that second part of the patch, i.e., perform the chdir("/)
in the common case again - unless the new --skip-chdir option is
specified. Restrict this new option to the case of "/" arguments.
* src/chroot.c (SKIP_CHDIR): Add enum.
(long_opts): Add entry for the new --skip-chdir option.
(usage): Add --skip-chdir option, and while at it, move the other
to options into alphabetical order.
(main): Accept the above new option, allowing it only in the case
when NEWROOT is the old "/".
Move down the chdir() call after the if-clause to ensure it is
run in any case - unless --skip-chdir is specified.
Add a 'newroot' variable for the new root directory as it is used
in a couple of places now.
* tests/misc/chroot-fail.sh: Invert the last tests which check the
working directory of the execvp()ed program when a "/"-like
argument was passed: now expect it to be "/" - unless --skip-chdir
is given.
* doc/coreutils.texi (chroot invocation): Document the new option.
Document that chroot(1) usually calls chdir("/") unless the new
--skip-chdir option is specified. Sort options.
* NEWS (Changes in behavior): Mention the fix.
(New features): Mention the new option.
* init.cfg (nonroot_has_perm_): Add chroot's new --skip-chdir option.
* tests/cp/preserve-gid.sh (t1): Likewise.
* tests/cp/special-bits.sh: Likewise.
* tests/id/setgid.sh: Likewise.
* tests/misc/truncate-owned-by-other.sh: Likewise.
* tests/mv/sticky-to-xpart.sh: Likewise.
* tests/rm/fail-2eperm.sh: Likewise.
* tests/rm/no-give-up.sh: Likewise.
* tests/touch/now-owned-by-other.sh: Likewise.
Reported by Andreas Schwab in http://bugs.gnu.org/18062
|
|
* init.cfg (require_root_): Adjust to use chroot, and make
`require_built_ chroot` implicit when chroot used in the test.
* po/POTFILES.in: Remove reference to setuidgid tool.
* src/.gitignore: Likewise.
* src/local.mk: Likewise.
* src/setuidgid.c: Remove.
* tests/cp/preserve-gid.sh: s/setuidgid/chroot --user/.
* tests/cp/special-bits.sh: Likewise.
* tests/id/setgid.sh: Likewise.
* tests/misc/truncate-owned-by-other.sh
* tests/mv/sticky-to-xpart.sh: Likewise.
* tests/rm/fail-2eperm.sh: Likewise.
* tests/rm/no-give-up.sh: Likewise.
* tests/touch/now-owned-by-other.sh: Likewise.
* tests/misc/chroot-fail.sh: Skip if chroot not built.
|
|
* tests/chmod/c-option.sh: Use `compare /dev/null ... || fail=1`
rather than `test -s ... && fail=1`, so that the file contents
are output, thus improving diagnostics for failing tests.
* tests/cp/acl.sh: Likewise.
* tests/cp/cp-a-selinux.sh: Likewise.
* tests/cp/cp-mv-enotsup-xattr.sh: Likewise.
* tests/cp/reflink-perm.sh: Likewise.
* tests/dd/misc.sh: Likewise.
* tests/misc/env-null.sh: Likewise.
* tests/misc/env.sh: Likewise.
* tests/misc/nice.sh: Likewise.
* tests/misc/nohup.sh: Likewise.
* tests/misc/printenv.sh: Likewise.
* tests/misc/xattr.sh: Likewise.
* tests/mv/update.sh: Likewise.
* tests/rm/deep-2.sh: Likewise.
* tests/rm/read-only.sh: Likewise.
* tests/split/r-chunk.sh: Likewise.
* tests/tail-2/follow-stdin.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
* cfg.mk (sc_prohibit_test_empty:): New syntax-check.
* tests/cp/proc-zero-len.sh: Adjust to avoid false syntax-check failure.
* tests/cp/proc-zero-len.sh: Likewise.
* tests/mv/part-symlink.sh: Likewise.
* tests/tail-2/infloop-1.sh: Likewise.
|
|
On most shells `:>file || framework_failure_` will not evaluate
the framework_failure_ even if there was an error writing the file.
shells which do evaluate the failure are ksh 93u+ and bash 4.2,
while shells wich don't include bash 4.3, solaris, freebsd, dash.
Furthermore this construct is problematic on Solaris 10 sh,
which will try to optimize away a `:' command in a loop
after the first iteration, even if it is redirected.
* tests/cp/link-deref.sh: Remove the leading colon on redirections.
* tests/cp/reflink-perm.sh: Likewise.
* tests/id/zero.sh: Likewise.
* tests/install/install-C.sh: Likewise.
* tests/misc/env.sh: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/runcon-no-reorder.sh: Likewise.
* tests/mv/partition-perm.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/retry.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
* tests/touch/read-only.sh: Likewise.
+ cfg.mk (sc_prohibit_colon_redirection): A new syntax check
to avoid further instances of this creeping in.
|
|
* init.cfg (gcc_shared_): A new function refactored from tests.
(require_gcc_shared_): Adjust to call gcc_shared_() to build the
test library, and remove that library before the function returns.
* tests/cp/nfs-removal-race.sh: Call the new gcc_shared_().
* tests/df/no-mtab-status.sh: Likewise.
* tests/df/skip-duplicates.sh: Likewise.
* tests/ls/getxattr-speedup.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* tests/rm/interactive-once.sh: Ensure the expected output
matches with the output on systems without /dev/stdin (like AIX 7).
Also change some fail=1 to a more appropriate framework_failure_.
|
|
* tests/rm/r-root.sh: Add a non-root test.
* tests/local.mk (all_tests): Mention the test.
|
|
Recent commit 2da7009d changed the error diagnostic of rm(1) trying
to remove "." or "..". Enhance the corresponding test.
* tests/rm/r-4.sh: Ensure rm(1) outputs the expected error diagnostic.
|
|
Fix a recent regression introduced in commit v8.21-127-g5ee7d8f
Also related to this is the recent query about root run `rm -I`
ignoring the mode bits of a file: https://bugzilla.redhat.com/1013171
* tests/rm/interactive-once.sh: Avoid the messages and
corresponding file presence checks with write protected files
when running as root.
|
|
This regression was introduced in commit v6.7-71-g0928c24
* src/rm.c (main): Make the -I option behave like --interactive=once.
* tests/rm/interactive-once.sh: Add cases for single and multiple files.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/9308
|
|
Include the number of arguments which rm received in the "Remove all
arguments?" prompt. This is useful in the, presumably, common case
where the arguments were not provided by hand, but instead were the
result of various shell expansions. A simple, if somewhat contrived,
example (assuming rm is aliased to rm -I) could be:
rm * .o
where the prompt "Remove 120 arguments?" is more likely to make
the user catch the problem.
* src/rm.c (main): Include correctly pluralized n_files
in the output message. Also remove the now redudant "all".
* tests/rm/interactive-always.sh: Adjust to the new prompt.
* tests/rm/interactive-once.sh: Likewise.
|
|
* init.cfg (require_ulimit_v_): Renamed from require_ulimit_
as this only checks for ulimit -v support. Other uses of
ulimit -t and ulimit -n in tests shouldn't cause false failures
if not supported.
* cfg.mk (sc_prohibit_test_ulimit_without_require_): A new syntax check
to ensure that require_ulimit_v_() is used iff required.
* tests/misc/head-c.sh: Add missing call to require_ulimit_v_.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise.
* tests/split/r-chunk.sh: Remove non mandatory require_ulimit_ call.
* tests/misc/sort-merge-fdlimit.sh: Likewise.
* tests/cp/link-heap.sh: Adjust to renamed require_ulimit_v_.
* tests/dd/no-allocate.sh: Likewise.
* tests/misc/csplit-heap.sh: Likewise.
* tests/misc/cut-huge-to-eol-range.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
|
|
* tests/du/long-from-unreadable.sh: This test requires a NAME_MAX
of at least 200, so skip the test otherwise.
* tests/rm/deep-2.sh: Likewise.
Reported by C de-Avillez with ecryptfs where NAME_MAX = 143.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* tests/rm/d-2.sh: EEXIST is a valid error on some systems.
Reported by Michael Felt on AIX 6.1
|
|
These commands would evoke an invalid diagnostic:
$ mkdir d && ln -s d s && env rm -r s/
rm: cannot remove 's': Too many levels of symbolic links
remove.c was stripping trailing slashes from "s/" before passing
the name to "rm". But a trailing slash may change the semantics,
and thus should not be stripped.
* src/remove.c (rm_fts): Do not strip trailing slashes.
* tests/rm/v-slash.sh: Adapt to new expected output.
* gnulib: Update to latest, for an improved fts.c that merely
normalizes trailing slashes.
Reported by Paul Eggert in discussion of http://bugs.gnu.org/12339
|
|
* Makefile.am (SUBDIRS): Remove 'tests'.
(include): The '$(top_srcdir)/tests/local.mk' file.
(check-root): Remove this convenience target, it's no longer needed
now that the "real" check-root target once in 'tests/Makefile' will
land in the top-level makefile.
* configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'.
* tests/Makefile.am: Rename ...
* tests/local.mk: ... like this, with a lot of adjustments.
* tests/init.cfg: Move ...
* init.cfg: ... here. This is necessary, for a limitation of the
gnulib-provided 'tests/init.sh', which unconditionally look for
'init.cfg' in the $(srcdir) directory.
* tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests',
not in '$srcdir', and extend $PATH with './src', not with '../src'.
* tests/Coreutils.pm: Adjust similarly.
* tests/pr/pr-tests.pl ($pfx): Likewise.
|
|
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
|
|
* tests/rm/fail-eperm: Rename ...
* tests/rm/fail-eperm.xpl: ... like this
* tests/Makefile.am (TESTS): Adjust.
(TEST_EXTENSIONS): New, list '.xpl'.
(XPL_TEST_LOGS): New, run a perl test in tainted mode.
* tests/shell-or-perl: Simplify this script: we no longer need to
parse the shebang line and adjust the flags in the perl invocation
accordingly.
|
|
* src/remove.c (prompt): Hoist the computation of is_empty, since we'll
need it slightly earlier.
Before, this function would arrange to fail with EISDIR when processing
a directory without --recursive (-r). Adjust the condition to exempt
an empty directory when --dir has been specified.
Improve comments.
* tests/rm/d-3: New file, to ensure that rm -d -i dir works.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
* THANKS.in: Update.
Reported by Michael Price in http://bugs.gnu.org/12260
|
|
Add new option to rm (-d/--dir), which allows removal of
empty directories, while still safely disallowing removal
of non-empty ones.
This improves compatibility with Mac OS X and BSD systems,
which honor the -d option.
* src/remove.c (rm_fts): Remove empty directories when requested.
* src/remove.h (rm_options) [remove_empty_directories]: New member.
* src/rm.c (long_opts, usage, main): Update usage and option parsing.
(rm_option_init): Initialize the new member.
* src/mv.c (rm_option_init): Initialize the new member.
* tests/rm/d-1: New test case - successfully delete empty dir.
* tests/rm/d-2: New test case - refuse to delete nonempty dir.
* tests/Makefile.am (TESTS): Add them.
|
|
* tests/rm/isatty: Remove now-unneeded "# `" line.
* tests/misc/ls-time: Likewise.
* tests/misc/date-sec: Remove stray "`" in comment.
* tests/du/long-sloop: Likewise.
* tests/mv/part-symlink: Replace multi-line `...` by $(...).
* tests/mv/sticky-to-xpart: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-gid: Likewise.
* tests/cp/same-file: Likewise.
|
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Run "make update-copyright".
|
|
Before init.sh and similar, we would set test=test_name, and then
construct temporary file names using $test. Now that each
init.sh-using test is in its own directory, that practice is unwelcome.
Remove bad examples.
* tests/rm/f-1: Per above.
* tests/rm/i-1: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/ir-1: Likewise.
* tests/rm/r-1: Likewise.
|
|
Relax initial regexp to match more instances, but add a
filter to avoid some invalid conversions. Run this:
git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \
-e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \
-e ' s/\`([^'\''"]*?'\'')/'\''$1/g'
The last disjunct in the above (...) filter is to exempt
any line that contains this string: '\''
With quoting like that, converting a ` to ' is likely to cause trouble,
so we'll handle those manually. Here are three examples where
the exemption is required:
*': `link-to-dir/'\'': hard link not allowed for directory'*) ;;
printf 'creating file `%s'\''\n' $f
'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
|
|
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
|
