| Age | Commit message (Collapse) | Author |
|---|
|
* init.cfg (require_ulimit_v_): Renamed from require_ulimit_
as this only checks for ulimit -v support. Other uses of
ulimit -t and ulimit -n in tests shouldn't cause false failures
if not supported.
* cfg.mk (sc_prohibit_test_ulimit_without_require_): A new syntax check
to ensure that require_ulimit_v_() is used iff required.
* tests/misc/head-c.sh: Add missing call to require_ulimit_v_.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise.
* tests/split/r-chunk.sh: Remove non mandatory require_ulimit_ call.
* tests/misc/sort-merge-fdlimit.sh: Likewise.
* tests/cp/link-heap.sh: Adjust to renamed require_ulimit_v_.
* tests/dd/no-allocate.sh: Likewise.
* tests/misc/csplit-heap.sh: Likewise.
* tests/misc/cut-huge-to-eol-range.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
|
|
* tests/du/long-from-unreadable.sh: This test requires a NAME_MAX
of at least 200, so skip the test otherwise.
* tests/rm/deep-2.sh: Likewise.
Reported by C de-Avillez with ecryptfs where NAME_MAX = 143.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* tests/rm/d-2.sh: EEXIST is a valid error on some systems.
Reported by Michael Felt on AIX 6.1
|
|
These commands would evoke an invalid diagnostic:
$ mkdir d && ln -s d s && env rm -r s/
rm: cannot remove 's': Too many levels of symbolic links
remove.c was stripping trailing slashes from "s/" before passing
the name to "rm". But a trailing slash may change the semantics,
and thus should not be stripped.
* src/remove.c (rm_fts): Do not strip trailing slashes.
* tests/rm/v-slash.sh: Adapt to new expected output.
* gnulib: Update to latest, for an improved fts.c that merely
normalizes trailing slashes.
Reported by Paul Eggert in discussion of http://bugs.gnu.org/12339
|
|
* Makefile.am (SUBDIRS): Remove 'tests'.
(include): The '$(top_srcdir)/tests/local.mk' file.
(check-root): Remove this convenience target, it's no longer needed
now that the "real" check-root target once in 'tests/Makefile' will
land in the top-level makefile.
* configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'.
* tests/Makefile.am: Rename ...
* tests/local.mk: ... like this, with a lot of adjustments.
* tests/init.cfg: Move ...
* init.cfg: ... here. This is necessary, for a limitation of the
gnulib-provided 'tests/init.sh', which unconditionally look for
'init.cfg' in the $(srcdir) directory.
* tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests',
not in '$srcdir', and extend $PATH with './src', not with '../src'.
* tests/Coreutils.pm: Adjust similarly.
* tests/pr/pr-tests.pl ($pfx): Likewise.
|
|
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
|
|
* tests/rm/fail-eperm: Rename ...
* tests/rm/fail-eperm.xpl: ... like this
* tests/Makefile.am (TESTS): Adjust.
(TEST_EXTENSIONS): New, list '.xpl'.
(XPL_TEST_LOGS): New, run a perl test in tainted mode.
* tests/shell-or-perl: Simplify this script: we no longer need to
parse the shebang line and adjust the flags in the perl invocation
accordingly.
|
|
* src/remove.c (prompt): Hoist the computation of is_empty, since we'll
need it slightly earlier.
Before, this function would arrange to fail with EISDIR when processing
a directory without --recursive (-r). Adjust the condition to exempt
an empty directory when --dir has been specified.
Improve comments.
* tests/rm/d-3: New file, to ensure that rm -d -i dir works.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
* THANKS.in: Update.
Reported by Michael Price in http://bugs.gnu.org/12260
|
|
Add new option to rm (-d/--dir), which allows removal of
empty directories, while still safely disallowing removal
of non-empty ones.
This improves compatibility with Mac OS X and BSD systems,
which honor the -d option.
* src/remove.c (rm_fts): Remove empty directories when requested.
* src/remove.h (rm_options) [remove_empty_directories]: New member.
* src/rm.c (long_opts, usage, main): Update usage and option parsing.
(rm_option_init): Initialize the new member.
* src/mv.c (rm_option_init): Initialize the new member.
* tests/rm/d-1: New test case - successfully delete empty dir.
* tests/rm/d-2: New test case - refuse to delete nonempty dir.
* tests/Makefile.am (TESTS): Add them.
|
|
* tests/rm/isatty: Remove now-unneeded "# `" line.
* tests/misc/ls-time: Likewise.
* tests/misc/date-sec: Remove stray "`" in comment.
* tests/du/long-sloop: Likewise.
* tests/mv/part-symlink: Replace multi-line `...` by $(...).
* tests/mv/sticky-to-xpart: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-gid: Likewise.
* tests/cp/same-file: Likewise.
|
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Run "make update-copyright".
|
|
Before init.sh and similar, we would set test=test_name, and then
construct temporary file names using $test. Now that each
init.sh-using test is in its own directory, that practice is unwelcome.
Remove bad examples.
* tests/rm/f-1: Per above.
* tests/rm/i-1: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/ir-1: Likewise.
* tests/rm/r-1: Likewise.
|
|
Relax initial regexp to match more instances, but add a
filter to avoid some invalid conversions. Run this:
git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \
-e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \
-e ' s/\`([^'\''"]*?'\'')/'\''$1/g'
The last disjunct in the above (...) filter is to exempt
any line that contains this string: '\''
With quoting like that, converting a ` to ' is likely to cause trouble,
so we'll handle those manually. Here are three examples where
the exemption is required:
*': `link-to-dir/'\'': hard link not allowed for directory'*) ;;
printf 'creating file `%s'\''\n' $f
'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
|
|
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
|
|
Run this:
git grep -l "\\\\\`[^']*'" tests \
|xargs perl -pi -e 's/\\\`(.*?'\'')/'\''$1/g
|
|
* tests/rm/many-dir-entries-vs-OOM: This test also exercises chmod.
|
|
Run "make update-copyright".
|
|
Commit 5eeaca94 added /sbin to the PATH for tests using mkfs. For other
tests, e.g. tests/cp-fiemap-perf using filefrag, we need /usr/sbin also.
Add both directories generally for the tests, "since many of us always
augment our PATH with all of the sbin paths all of the time anyway" (Bob
in http://lists.gnu.org/archive/html/coreutils/2011-11/msg00107.html).
The previous commit is hereby obsolete.
* tests/init.cfg (sanitize_path_): Add /sbin and /usr/sbin to PATH
unless already included. Needed for tests using admin tools like mkfs
and filefrag on systems where the user's environment does not have
these directories in the PATH.
* tests/init.cfg (require_mkfs_PATH_): Remove obsolete function.
* tests/cp/cp-a-selinux: Remove require_mkfs_PATH_ call.
* tests/cp/cp-mv-enotsup-xattr: Likewise.
* tests/cp/sparse-fiemap: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/rm/read-only: Likewise.
|
|
Likewise, when an empty file is expected, use "compare /dev/null out",
not "compare out /dev/null". I.e., specify the expected/desired contents
via the first file name. Prompted by a suggestion from Bruno Haible
in http://thread.gmane.org/gmane.comp.gnu.grep.bugs/4020/focus=29154
Run these commands:
git grep -l -E 'compare [^ ]+ exp' \
|xargs perl -pi -e 's/(compare) (\S+) (exp\S*)/$1 $3 $2/'
git grep -l -E 'compare [^ ]+ /dev/null' \
|xargs perl -pi -e 's/(compare) (\S+) (\/dev\/null)/$1 $3 $2/'
* tests/chgrp/no-x: As above.
* tests/chmod/no-x: Likewise.
* tests/chmod/silent: Likewise.
* tests/chmod/thru-dangling: Likewise.
* tests/chown/basic: Likewise.
* tests/chown/deref: Likewise.
* tests/chown/preserve-root: Likewise.
* tests/cp/abuse: Likewise.
* tests/cp/backup-is-src: Likewise.
* tests/cp/cp-a-selinux: Likewise.
* tests/cp/cp-mv-enotsup-xattr: Likewise.
* tests/cp/fail-perm: Likewise.
* tests/cp/into-self: Likewise.
* tests/cp/proc-zero-len: Likewise.
* tests/cp/src-base-dot: Likewise.
* tests/cp/thru-dangling: Likewise.
* tests/dd/reblock: Likewise.
* tests/dd/unblock-sync: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/basic: Likewise.
* tests/du/bigtime: Likewise.
* tests/du/deref-args: Likewise.
* tests/du/exclude: Likewise.
* tests/du/files0-from-dir: Likewise.
* tests/du/hard-link: Likewise.
* tests/du/inacc-dest: Likewise.
* tests/du/inacc-dir: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/max-depth: Likewise.
* tests/du/move-dir-while-traversing: Likewise.
* tests/du/no-deref: Likewise.
* tests/du/no-x: Likewise.
* tests/du/one-file-system: Likewise.
* tests/du/slash: Likewise.
* tests/du/trailing-slash: Likewise.
* tests/install/strip-program: Likewise.
* tests/ln/hard-backup: Likewise.
* tests/ls/block-size: Likewise.
* tests/ls/color-clear-to-eol: Likewise.
* tests/ls/color-dtype-dir: Likewise.
* tests/ls/color-norm: Likewise.
* tests/ls/dangle: Likewise.
* tests/ls/dired: Likewise.
* tests/ls/file-type: Likewise.
* tests/ls/follow-slink: Likewise.
* tests/ls/infloop: Likewise.
* tests/ls/m-option: Likewise.
* tests/ls/no-arg: Likewise.
* tests/ls/recursive: Likewise.
* tests/ls/rt-1: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/ls/stat-failed: Likewise.
* tests/ls/stat-free-symlinks: Likewise.
* tests/ls/x-option: Likewise.
* tests/misc/arch: Likewise.
* tests/misc/cat-buf: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/chcon: Likewise.
* tests/misc/csplit: Likewise.
* tests/misc/df-P: Likewise.
* tests/misc/fmt-long-line: Likewise.
* tests/misc/groups-dash: Likewise.
* tests/misc/groups-version: Likewise.
* tests/misc/head-pos: Likewise.
* tests/misc/nl: Likewise.
* tests/misc/od-N: Likewise.
* tests/misc/od-multiple-t: Likewise.
* tests/misc/od-x8: Likewise.
* tests/misc/printf: Likewise.
* tests/misc/printf-hex: Likewise.
* tests/misc/pwd-option: Likewise.
* tests/misc/readlink-fp-loop: Likewise.
* tests/misc/runcon-no-reorder: Likewise.
* tests/misc/seq-long-double: Likewise.
* tests/misc/sort-NaN-infloop: Likewise.
* tests/misc/sort-benchmark-random: Likewise.
* tests/misc/sort-debug-keys: Likewise.
* tests/misc/sort-float: Likewise.
* tests/misc/sort-merge-fdlimit: Likewise.
* tests/misc/sort-unique-segv: Likewise.
* tests/misc/stat-hyphen: Likewise.
* tests/misc/stat-slash: Likewise.
* tests/misc/stdbuf: Likewise.
* tests/misc/sum-sysv: Likewise.
* tests/misc/tac-2-nonseekable: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/tr-case-class: Likewise.
* tests/misc/truncate-fail-diag: Likewise.
* tests/misc/wc-files0: Likewise.
* tests/mkdir/selinux: Likewise.
* tests/mv/backup-dir: Likewise.
* tests/mv/backup-is-src: Likewise.
* tests/mv/diag: Likewise.
* tests/mv/dir2dir: Likewise.
* tests/mv/dup-source: Likewise.
* tests/mv/force: Likewise.
* tests/mv/hard-verbose: Likewise.
* tests/mv/i-link-no: Likewise.
* tests/mv/into-self: Likewise.
* tests/mv/into-self-2: Likewise.
* tests/mv/into-self-3: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/perm-1: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/mv/trailing-slash: Likewise.
* tests/rm/rm1: Likewise.
* tests/rm/rm2: Likewise.
* tests/rm/cycle: Likewise.
* tests/rm/dir-no-w: Likewise.
* tests/rm/dir-nonrecur: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/fail-eacces: Likewise.
* tests/rm/i-never: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/rm/rm3: Likewise.
* tests/rm/rm5: Likewise.
* tests/rm/unread2: Likewise.
* tests/rm/v-slash: Likewise.
* tests/sample-test: Likewise.
* tests/split/b-chunk: Likewise.
* tests/split/fail: Likewise.
* tests/split/l-chunk: Likewise.
* tests/split/lines: Likewise.
* tests/split/r-chunk: Likewise.
* tests/split/suffix-length: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/follow-name: Likewise.
* tests/tail-2/follow-stdin: Likewise.
* tests/tail-2/pipe-f: Likewise.
* tests/tail-2/pipe-f2: Likewise.
* tests/tail-2/start-middle: Likewise.
* tests/touch/60-seconds: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/not-owner: Likewise.
* tests/touch/relative: Likewise.
|
|
* tests/install/basic-1: Use compare, not diff.
* tests/mkdir/p-v: Likewise.
* tests/mv/part-fail: Likewise.
* tests/rm/rm1: Likewise.
* tests/rm/rm2: Likewise.
* tests/touch/not-owner: Likewise.
|
|
|
|
* tests/df/total-verify: Use require_perl_, so that this test is
skipped when perl is not available.
* tests/rm/deep-2: Likewise, and fix wording in a comment.
Reported by Bruno Haible.
|
|
* tests/init.cfg (require_mkfs_PATH_): New function to test whether mkfs
is in PATH, otherwise adding /sbin to PATH. Needed for distributions
(OpenSuSE, Solaris) in which sudo does not include /sbin in PATH.
* tests/cp/cp-a-selinux: Use require_mkfs_PATH_.
* tests/cp/cp-mv-enotsup-xattr: Likewise.
* tests/cp/sparse-fiemap: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/rm/read-only: Likewise.
|
|
Lesson: do not include details like "4 million" in a file name.
* tests/rm/many-dir-entries-vs-OOM: Renamed from ...
* tests/rm/4-million-entry-dir: ...this.
* tests/Makefile.am (TESTS): Reflect renaming.
|
|
* tests/rm/4-million-entry-dir: Create only 200,000 files, rather
than 4 million. The latter was overkill, and was too likely to
fail due to inode exhaustion. Not everyone is using btrfs yet.
Now that this test doesn't take so long, label it as merely
"expensive", rather than "very expensive". Thanks to
Bernhard Voelker for pointing out the risk of inode exhaustion.
|
|
For details, see the gnulib commit,
http://git.sv.gnu.org/cgit/gnulib.git/commit/?id=47cb657e
* tests/rm/4-million-entry-dir: New test.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
* gnulib: Update to latest to get the required fts fixes.
|
|
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
|
|
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
|
|
* tests/CuSkip.pm (skip): New file/module/function, to help
the perl test scripts "skip" a test consistently, emitting
a diagnostic both into the log file and into the outermost
stderr stream that is more likely to be seen by a human.
* tests/check.mk (TESTS_ENVIRONMENT): Add -MCuSkip.
* tests/misc/date-next-dow: Use CuSkip::skip in place of warn+exit-77.
* tests/misc/tty-eof: Likewise.
* tests/misc/uniq: Likewise.
* tests/rm/fail-eperm: Likewise.
* tests/misc/md5sum-newline: Likewise. Also, s/program_name/ME/.
* tests/misc/ls-misc (setuid_setup, main): Likewise.
* tests/misc/pwd-long: Likewise, and add -I"$abs_srcdir" -MCuSkip
to the $PERL invocation command.
Inspired by a request from Bruno Haible regarding misc/tty-eof:
http://debbugs.gnu.org/8570
|
|
Run "make update-copyright".
|
|
* cfg.mk (LINE_LEN_MAX, FILTER_LONG_LINES): New macros.
(sc_long_lines): New rule.
* HACKING: Use shorter URLs to the same material.
* doc/Makefile.am, doc/coreutils.texi, m4/boottime.m4:
* man/help2man, man/stdbuf.x, src/Makefile.am, src/cat.c, src/copy.c:
* src/cp.c, src/dd.c, src/df.c, src/du.c, src/groups.c, src/install.c:
* src/ls.c, src/md5sum.c, src/mv.c, src/od.c, src/pinky.c, src/ptx.c:
* src/readlink.c, src/remove.c, src/rmdir.c, src/setuidgid.c:
* src/sort.c, src/tail.c, src/touch.c, tests/Coreutils.pm:
* tests/cp/existing-perm-race, tests/cp/perm, tests/cp/preserve-gid:
* tests/du/2g, tests/du/long-from-unreadable, tests/init.sh:
* tests/install/basic-1, tests/ls/nameless-uid:
* tests/ls/readdir-mountpoint-inode, tests/misc/chroot-credentials:
* tests/misc/cut, tests/misc/date, tests/misc/join, tests/misc/md5sum:
* tests/misc/sha1sum, tests/misc/sha224sum, tests/misc/sort:
* tests/misc/sort-continue, tests/misc/sort-files0-from:
* tests/misc/sort-rand, tests/misc/stdbuf, tests/misc/tr:
* tests/misc/uniq, tests/mv/atomic, tests/mv/part-fail:
* tests/mv/part-symlink, tests/mv/sticky-to-xpart, tests/pr/pr-tests:
* tests/rm/fail-2eperm, tests/rm/interactive-always:
Reformat to fit within 80 columns.
* doc/Makefile.am (BAD_POSIX_PERL): New macro.
* doc/coreutils.texi: Reword slightly, to make menus and
index lines shorter.
* src/md5sum.c: Redo --help output so that it fits within 79
columns, since that's a bit more portable and all the other --help
strings fit in 79 columns.
|
|
Automatically make all of the changes like this:
-test "$VERBOSE" = yes && chgrp --version
+print_ver_ chgrp
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
|
|
|
|
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
|
|
* tests/init.cfg (retry_delay_): Describe
the backoff method used.
* tests/ls/readdir-mountpoint-inode: Add a timeout
to the stat call to eliminate the chance of hangups.
* tests/mv/i-3: Change the timeout required to pass
from 1 second to a range of .1s - 3.1s.
* tests/rm/dangling-symlink: Likewise.
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
* src/remove.c (rm_fts): Fix incorrect comparison of
device and inode numbers.
* tests/rm/one-file-system2: Add a separate test so
that it can be run as a normal user (It doesn't need to mount).
* tests/Makefile.am: Reference it.
* NEWS: Mention the fix.
Reported by Jan Larres.
|
|
While "rm ''" would properly fail, "rm F1 '' F2" would fail
to remove F1 and F2, due to the empty string argument.
This bug was introduced on 2009-07-12, via commit 4f73ecaf,
"rm: rewrite to use fts".
* gnulib: Update to latest, for fixed fts.c.
* NEWS (Bug fixes): Describe it.
* tests/rm/empty-name: Adjust for changed diagnostic.
(mk_file): Define, copied from misc/ls-misc.
(empty-name-2): New test, for today's fix.
* lib/xfts.c (xfts_open): Reflect the change in fts_open, now that
it no longer fails immediately when one argument is the empty string.
Assert that the bit flags were not the cause of failure.
* po/POTFILES.in: Remove xfts.c.
* THANKS: Update.
Reported by Ladislav Hagara.
|
|
* tests/misc/pwd-long: Fix spelling of cygwin1.dll in comment.
* tests/rm/fail-eperm: Likewise.
Reported by Eric Blake.
|
|
These tests perform no PATH search, and used to simply delete PATH from
the environment. However, that is not portable, as seen on Cygwin,
where cygwin.dll must be resolvable via PATH when starting a sub-shell.
With commit 0cc04241, we took the alternate approach of untainting the
incoming $ENV{PATH}, but that fails when it contains an other-writable
directory. Instead, now we hard code it to '/bin:/usr/bin'.
* tests/misc/pwd-long: Hard code $ENV{PATH} to a safe value.
* tests/rm/fail-eperm: Likewise.
Reported by Gilles Espinasse, Andreas Schwab, and Bauke Jan Douma.
|
|
* tests/Makefile.am (root_tests): Add rm/read-only to the list.
* tests/rm/read-only: New file.
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
* tests/misc/sort-compress: Remove non-portable over-restriction
of PATH; besides, commit 3ea177e changed sort to no longer default
to gzip.
* tests/rm/fail-eperm: Untaint, rather than clear, PATH.
* tests/misc/pwd-long: Likewise. Also skip test if long path
cannot be created.
(normalize_to_cwd_relative): Use eq rather than ==, since cygwin
perl doesn't properly handle 64-bit ino_t numerically.
|
|
* tests/rm/one-file-system (cleanup_): Unmount a/b, rather than
"$other_partition_tmpdir", to accommodate those who link /etc/mtab
to /proc/mounts. Reported by Gilles Espinasse in
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/18508
|
|
* remove.c: Don't include "unlinkdir.h"; no longer used.
Do not include <setjmp.h> or "cycle-check.h". Likewise.
Include "xfts.h".
(dir_name, dir_len): Remove definitions.
(CONSECUTIVE_READDIR_UNLINK_THRESHOLD): Likewise.
(INODE_SORT_DIR_ENTRIES_THRESHOLD, NEED_REWIND, D_TYPE): Likewise.
(struct dirstack_state, Dirstack_state): Likewise.
(g_buf, g_n_allocated): Remove declarations.
(hash_freer, hash_compare_strings, rm_malloc): Remove functions.
(rm_free, push_dir, top_dir, pop_dir, right_justify): Likewise.
(full_filename0, xfull_filename, full_filename_): Likewise.
(AD_stack_height, AD_stack_top, AD_stack_pop, AD_stack_clear): Likewise.
(obstack_init_minimal, ds_init, ds_clear, ds_free): Likewise.
(AD_pop_and_chdir, AD_ensure_initialized, AD_mark_helper): Likewise.
(AD_mark_as_unremovable, AD_mark_current_as_unremovable): Likewise.
(AD_push_initial, AD_push, AD_push, AD_is_removable): Likewise.
(write_protected_non_symlink): Change 3rd parameter from
dirstack_state "ds" to full_name.
(prompt): Adjust parameters. Now, state comes from FTS/FTSENT pair.
Those replace fd_cwd and "ds". Remove "filename". Remove pdirent_type
in favor of new "is_dir" parameter. Rename is_empty to is_empty_p.
(DO_RMDIR, DO_UNLINK): Remove definitions.
(remove_entry, fd_to_subdirp, compare_ino): Remove functions.
(dirent_count, dirent_inode_sort_may_be_useful): Likewise.
(preprocess_dir): Likewise.
(fts_skip_tree, mark_ancestor_dirs, excise, rm_fts): New functions.
(remove_cwd_entries, remove_dir, rm_1): Remove functions.
(rm): Rewrite as a simple loop calling fts_read and dispatching
each entry via rm_fts.
* src/rm.c (main): Adapt to new signature of rm().
* bootstrap.conf (gnulib_modules): Remove unlinkdir, no longer used.
* src/Makefile.am (sc_tight_scope): Also recognize an extern "enum"
declaration.
* tests/rm/empty-name: Adjust expected output to match new diagnostic.
* NEWS (Improvements): Mention it.
|
|
Transformed via this shell code:
t=$'\t'
git ls-files \
| grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \
| grep -vE 'tests/pr/|help2man' \
| xargs grep -lE "^ *$t" \
| xargs perl -MText::Tabs -ni -le \
'$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
|
|
* tests/rm/inaccessible: Factor out openat-support-detection code...
* tests/test-lib.sh (require_openat_support_): ...into this new function.
|
|
|
