summaryrefslogtreecommitdiff
path: root/tests/rm
AgeCommit message (Collapse)Author
2016-01-19tests: avoid false failure due to remove() ignoring u-w on NFSPádraig Brady
* tests/rm/rm1.sh: Also remove the group write bit which was required on one NFS setup at least. Note u-w was enough to deny file creation, g-w was also required to deny file removal. * tests/rm/cycle.sh: Likewise. * tests/mv/perm-1.sh: Likewise.
2016-01-18tests: adjust delays to avoid false positivesPádraig Brady
* tests/rm/dangling-symlink.sh: The effective delay was only 1.5s. So delay before the operation, and increase the iteration count by 1 to increase the delay to 6.3s. This failure was noticed once on a FreeBSD 10.2 x86_64 virtual machine. * tests/dd/stats.sh: Remove quotes on sleep argument to ensure arguments are accumulated appropriately. * tests/du/move-dir-while-traversing.sh: sleep before operation, to increase the effective delay from 1.6s to 3.2s. * tests/tail-2/flush-initial.sh: Likewise. * tests/tail-2/pipe-f2.sh: Sleep first so that the effective delay matches the commented value.
2016-01-18test: skip test rather than fail with Solaris 10 sedPádraig Brady
* tests/rm/r-root.sh: This test was seen to ERROR due to sed input not having a terminating '\n'. Therefore just skip with diagnostics upon failure to adjust the error output with sed. Reported by Assaf Gordon.
2016-01-01maint: update all copyright year number rangesPádraig Brady
Run "make update-copyright" and then... * gnulib: Update to latest with copyright year adjusted. * tests/init.sh: Sync with gnulib to pick up copyright year. * bootstrap: Likewise. * tests/sample-test: Adjust to use the single most recent year.
2015-11-04all: avoid quoting file names when possiblePádraig Brady
Quote file names using the "shell-escape" or "shell-escape-always" methods, which quote as appropriate for most shells, and better support copy and paste of presented names. The "always" variant is used when the file name is embedded in an error message with surrounding spaces. * cfg.mk (sc_error_shell_quotes): A new syntax check rule to suggest quotef() where appropriate. (sc_error_shell_always_quotes): Likewise for quoteaf(). * src/system.h (quotef): A new define to apply shell quoting when needed. I.E. when shell character or ':' is present. (quoteaf): Likewise, but always quote. * src/*.c: Use quotef() and quoteaf() rather than quote() where appropriate. * tests/: Adjust accordingly.
2015-10-15tests: avoid false failure in rm/r-root.sh with gdb warningsPádraig Brady
* tests/rm/r-root.sh: Skip the test if there are gdb warnings that will impact further stderr checks. For example some buggy gdb versions may report "Got object file from memory but can't read symbols: File truncated". Also fix an incorrect stderr check from the previous change. Reported by Bernhard Voelker.
2015-10-15tests: avoid false failure in rm/r-root.sh under loadPádraig Brady
* tests/rm/r-root.sh: Use gdb rather than timeout(1) as the last resort protection against unlinkat() calls. The timeout of 2s was susceptible to false positives under load, and gdb is stronger protection in any case. We remove the "expensive" tag on this test also since it should be robust. Reported by Jim Meyering.
2015-09-22maint: use adaptive approach for `ulimit -v` based testsBernhard Voelker
When configured with either 'symlinks' or 'shebangs' as value for the --enable-single-binary option, tests based on `ulimit -v` are skipped. The reason is that the multicall 'coreutils' binary requires much more memory due to shared libraries being loaded, and the size of the 'date' binary (~290KiB) compared to the multicall binary (~5MiB), of course. Finally, in the case of 'shebangs', the starting shell requires more memory, too Instead of using hard-coded values for the memory limit, use an adaptive approach: first determine the amount of memory for a similar, yet more trivial invocation of the command, and then do the real test run using that limit (plus some buffer in some cases). * init.cfg (require_ulimit_v_): Remove function. (get_min_ulimit_v_): Add function to determine the minimum memory limit required for a given command in an adaptive way. * cfg.mk (sc_prohibit_test_ulimit_without_require_): Change the name of the above function in the syntax-check rule. * tests/cp/link-heap.sh: Use the above function to determine the minimum memory required to run a command simpler than in the real test run. Use that limit plus a buffer there. While at it, change to list of commands in the subshell to fail also if the beginning `ulimit -v` fails. * tests/dd/no-allocate.sh: Likewise. * tests/misc/csplit-heap.sh: Likewise. * tests/misc/cut-huge-range.sh: Likewise. * tests/misc/head-c.sh: Likewise. * tests/misc/printf-surprise.sh: Likewise. * tests/split/line-bytes.sh: Likewise. * tests/rm/many-dir-entries-vs-OOM.sh: Likewise - doing it separately for each program under test.
2015-07-03tests: avoid side effects of $SHELL environment variablePádraig Brady
Since non interactive shells don't generally set $SHELL, its value is propagated through the tests and may cause issues; for example if $SHELL implicitly adjusts $PATH when run. Instead we set $SHELL to that determined by the posix-shell module, and use that consistently for all test sub scripts, including those created thorugh the `split --filter` command. * tests/local.mk: Explicitly set $SHELL to $(PREFERABLY_POSIX_SHELL) which defaults to $CONFIG_SHELL and thus usually /bin/sh. * tests/envvar-check: Remove bash environment variables with side effects, in case /bin/bash was selected for $SHELL. * tests/misc/help-version.sh: Remove redundant initialization of $SHELL. * tests/install/strip-program.sh: Use $SHELL for sub script. * tests/misc/sort-compress-hang.sh: Likewise. * tests/misc/sort-compress-proc.sh: Likewise. * tests/misc/sort-compress.sh: Likewise. * tests/misc/timeout-group.sh: Likewise. * tests/rm/fail-eperm.xpl: Remove redundant elision of bash env vars. * tests/misc/pwd-long.sh: Likewise.
2015-06-25tests: avoid false failures with LD_PRELOAD=libasan.so.2Pádraig Brady
The LD_PRELOAD checks by -fsanitize=address are overly strict: https://groups.google.com/forum/#!topic/address-sanitizer/jEvOJgkDqQk A workaround is to first export LD_PRELOAD=libasan.so.2 The tests below are adjusted so that workaround is not discarded. * tests/cp/no-ctx.sh: Append to $LD_PRELOAD. * tests/df/no-mtab-status.sh: Likewise. * tests/df/skip-duplicates.sh: Likewise. * tests/ls/getxattr-speedup.sh: Likewise. * tests/rm/r-root.sh: Likewise. * tests/cp/nfs-removal-race.sh: Likewise. Also check that LD_PRELOAD is effective to aid future maintainability and avoid false failure if libasan.so.2 is not preloaded.
2015-05-11tests: cleanup background processes upon interruptionPádraig Brady
Reap background processes so that: - Stray processes aren't left on the system - Files aren't held open causing deletion issues on NFS - Partitions used to run the tests from can be unmounted * tests/tail-2/F-vs-missing.sh: Add the `kill && wait` of the background $pid(s) to cleanup_(). * tests/tail-2/F-vs-rename.sh: Likewise. * tests/tail-2/f-vs-rename.sh: Likewise. * tests/tail-2/append-only.sh: Likewise. * tests/tail-2/assert-2.sh: Likewise. * tests/tail-2/assert.sh: Likewise. * tests/tail-2/flush-initial.sh: Likewise. * tests/tail-2/inotify-hash-abuse.sh: Likewise. * tests/tail-2/inotify-hash-abuse2.sh: Likewise. * tests/tail-2/inotify-race.sh: Likewise. * tests/tail-2/inotify-rotate-resources.sh: Likewise. * tests/tail-2/inotify-rotate.sh: Likewise. * tests/tail-2/pid.sh: Likewise. * tests/tail-2/pipe-f2.sh: Likewise. * tests/tail-2/retry.sh: Likewise. * tests/tail-2/symlink.sh: Likewise. * tests/tail-2/tail-n0f.sh: Likewise. * tests/tail-2/wait.sh: Likewise. * tests/cp/existing-perm-race.sh: Likewise. * tests/cp/file-perm-race.sh: Likewise. * tests/cp/parent-perm-race.sh: Likewise. * tests/cp/sparse-to-pipe.sh: Likewise. * tests/dd/stats.sh: Likewise. * tests/du/move-dir-while-traversing.sh: Likewise. * tests/misc/cat-buf.sh: Likewise. * tests/misc/help-version.sh: Likewise. * tests/misc/printf-surprise.sh: Likewise. * tests/misc/sort-compress-proc.sh: Likewise. * tests/misc/sort-spinlock-abuse.sh: Likewise. * tests/misc/stdbuf.sh: Likewise. * tests/misc/tac-continue.sh: Likewise. * tests/misc/timeout-group.sh: Likewise. * tests/mv/i-3.sh: Likewise. * tests/rm/dangling-symlink.sh: Likewise. * tests/rm/isatty.sh: Likewise. * cfg.mk (sc_prohibit_test_background_without_cleanup_): A new syntax-check to ensure cleanup_() is defined when background tasks are created in a test.
2015-01-31doc,maint: fix use of "i.e." in documentation and commentsBernhard Voelker
To align with all other places (and correct grammar), change all upper-case "I.E." to "I.e.". Furthermore, ensure that "i.e." is followed by a comma. Finally, ensure to use a double-space before "I.e.," at the beginning of a sentence. The following was used to change all offending uses (apart from old ChangeLog files): $ git grep -liF 'i.e.' \ | xargs sed -i \ -e 's/I\.E\./I.e./g' \ -e 's/\. \(I\.e\.\)/. \1/g' \ -e 's/\([Ii]\.e\.\)\( \)/\1,\2/g' \ -e 's/\([Ii]\.e\.\)$/\1,/g' * cfg.mk (sc_prohibit_uppercase_id_est): Add new rule. (sc_ensure_double_space_after_dot_before_id_est): Likewise. (sc_ensure_comma_after_id_est): Likewise. (old_NEWS_hash): Refresh hash via "make update-NEWS-hash". * NEWS: Change use of "id est" abbreviation via the above command. * README: Likewise. * README-prereq: Likewise. * doc/coreutils.texi: Likewise. * gl/lib/rand-isaac.c: Likewise. * gl/lib/tempname.c.diff: Likewise. * man/stdbuf.x: Likewise. * src/cat.c: Likewise. * src/copy.c: Likewise. * src/copy.h: Likewise. * src/cp.c: Likewise. * src/cut.c: Likewise. * src/dd.c: Likewise. * src/df.c: Likewise. * src/fiemap.h: Likewise. * src/longlong.h: Likewise. * src/ls.c: Likewise. * src/numfmt.c: Likewise. * src/pr.c: Likewise. * src/shred.c: Likewise. * src/shuf.c: Likewise. * src/split.c: Likewise. * tests/Coreutils.pm: Likewise. * tests/df/df-symlink.sh: Likewise. * tests/df/skip-rootfs.sh: Likewise. * tests/init.sh: Likewise. * tests/ls/color-norm.sh: Likewise. * tests/misc/basename.pl: Likewise. * tests/misc/ls-misc.pl: Likewise. * tests/misc/md5sum-bsd.sh: Likewise. * tests/misc/shred-exact.sh: Likewise. * tests/misc/sort.pl: Likewise. * tests/misc/stdbuf.sh: Likewise. * tests/misc/tac-continue.sh: Likewise. * tests/rm/r-root.sh: Likewise. * tests/tail-2/symlink.sh: Likewise.
2015-01-14tests: use compare-vs-/dev/null instead of 'test -s'Bernhard Voelker
When some program produces unexpected output, that use of compare-vs-/dev/null will ensure that the surprising output is printed in the test's output. With "test -s err" only, one would have to instrument and rerun in order to see the offending output. * cfg.mk (sc_prohibit_and_fail_1): Exempt 'compare' from this check. * tests/dd/misc.sh: Change "tests -s ... || fail=1" to "compare /dev/null ... && fail=1". * tests/misc/nice.sh: Likewise. * tests/rm/read-only.sh: Likewise. * tests/tail-2/inotify-race.sh: Likewise. * tests/touch/no-dereference.sh: Likewise. Suggested by Jim Meyering in http://lists.gnu.org/archive/html/coreutils/2015-01/msg00042.html
2015-01-14tests: add extra protection against unexpected exitsPádraig Brady
Many tests use `program ... && fail=1` to ensure expected error situations are indicated. However that would mask an unexpected exit (like a crash). Therefore explicitly check the expected exit code. Note where error messages are also verified, the extra protection is not added. * tests/init.sh (returns_): A new helper function to check the return code of a command, and used throughout the tests. * cfg.mk (sc_prohibit_and_fail_1): Add a syntax check to avoid new instances of this issue.
2015-01-01maint: update all copyright year number rangesPádraig Brady
Run "make update-copyright" and then... * tests/sample-test: Adjust to use the single most recent year. * tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message, so that year is updated automatically in future.
2014-08-01chroot: perform chdir("/") again unless new --skip-chdir is specifiedBernhard Voelker
Since commit v8.22-94-g99960ee, chroot(1) skips the chroot(2) syscall for "/" arguments (and synonyms). The problem is that it also skips the following chdir("/") call in that case. The latter breaks existing scripts which expect "/" to be the working directory inside the chroot. While the first part of the change - i.e., skipping chroot("/") - is okay for consistency with systems where it might succeed for a non-root user, the second part might be malicious, e.g. cd /home/user && chroot '/' bin/foo In the "best" case, chroot(1) could not execute 'bin/foo' with ENOENT, but in the worst case, chroot(1) would execute '/home/user/bin/foo' in the case that exists - instead of '/bin/foo'. Revert that second part of the patch, i.e., perform the chdir("/) in the common case again - unless the new --skip-chdir option is specified. Restrict this new option to the case of "/" arguments. * src/chroot.c (SKIP_CHDIR): Add enum. (long_opts): Add entry for the new --skip-chdir option. (usage): Add --skip-chdir option, and while at it, move the other to options into alphabetical order. (main): Accept the above new option, allowing it only in the case when NEWROOT is the old "/". Move down the chdir() call after the if-clause to ensure it is run in any case - unless --skip-chdir is specified. Add a 'newroot' variable for the new root directory as it is used in a couple of places now. * tests/misc/chroot-fail.sh: Invert the last tests which check the working directory of the execvp()ed program when a "/"-like argument was passed: now expect it to be "/" - unless --skip-chdir is given. * doc/coreutils.texi (chroot invocation): Document the new option. Document that chroot(1) usually calls chdir("/") unless the new --skip-chdir option is specified. Sort options. * NEWS (Changes in behavior): Mention the fix. (New features): Mention the new option. * init.cfg (nonroot_has_perm_): Add chroot's new --skip-chdir option. * tests/cp/preserve-gid.sh (t1): Likewise. * tests/cp/special-bits.sh: Likewise. * tests/id/setgid.sh: Likewise. * tests/misc/truncate-owned-by-other.sh: Likewise. * tests/mv/sticky-to-xpart.sh: Likewise. * tests/rm/fail-2eperm.sh: Likewise. * tests/rm/no-give-up.sh: Likewise. * tests/touch/now-owned-by-other.sh: Likewise. Reported by Andreas Schwab in http://bugs.gnu.org/18062
2014-05-21tests: use chroot --user rather than internal setuidgid toolPádraig Brady
* init.cfg (require_root_): Adjust to use chroot, and make `require_built_ chroot` implicit when chroot used in the test. * po/POTFILES.in: Remove reference to setuidgid tool. * src/.gitignore: Likewise. * src/local.mk: Likewise. * src/setuidgid.c: Remove. * tests/cp/preserve-gid.sh: s/setuidgid/chroot --user/. * tests/cp/special-bits.sh: Likewise. * tests/id/setgid.sh: Likewise. * tests/misc/truncate-owned-by-other.sh * tests/mv/sticky-to-xpart.sh: Likewise. * tests/rm/fail-2eperm.sh: Likewise. * tests/rm/no-give-up.sh: Likewise. * tests/touch/now-owned-by-other.sh: Likewise. * tests/misc/chroot-fail.sh: Skip if chroot not built.
2014-05-07tests: improve diagnostics when asserting empty filesPádraig Brady
* tests/chmod/c-option.sh: Use `compare /dev/null ... || fail=1` rather than `test -s ... && fail=1`, so that the file contents are output, thus improving diagnostics for failing tests. * tests/cp/acl.sh: Likewise. * tests/cp/cp-a-selinux.sh: Likewise. * tests/cp/cp-mv-enotsup-xattr.sh: Likewise. * tests/cp/reflink-perm.sh: Likewise. * tests/dd/misc.sh: Likewise. * tests/misc/env-null.sh: Likewise. * tests/misc/env.sh: Likewise. * tests/misc/nice.sh: Likewise. * tests/misc/nohup.sh: Likewise. * tests/misc/printenv.sh: Likewise. * tests/misc/xattr.sh: Likewise. * tests/mv/update.sh: Likewise. * tests/rm/deep-2.sh: Likewise. * tests/rm/read-only.sh: Likewise. * tests/split/r-chunk.sh: Likewise. * tests/tail-2/follow-stdin.sh: Likewise. * tests/tail-2/inotify-race.sh: Likewise. * tests/tail-2/wait.sh: Likewise. * tests/touch/no-dereference.sh: Likewise. * cfg.mk (sc_prohibit_test_empty:): New syntax-check. * tests/cp/proc-zero-len.sh: Adjust to avoid false syntax-check failure. * tests/cp/proc-zero-len.sh: Likewise. * tests/mv/part-symlink.sh: Likewise. * tests/tail-2/infloop-1.sh: Likewise.
2014-03-05tests: avoid the :> construct which can hide errorsPádraig Brady
On most shells `:>file || framework_failure_` will not evaluate the framework_failure_ even if there was an error writing the file. shells which do evaluate the failure are ksh 93u+ and bash 4.2, while shells wich don't include bash 4.3, solaris, freebsd, dash. Furthermore this construct is problematic on Solaris 10 sh, which will try to optimize away a `:' command in a loop after the first iteration, even if it is redirected. * tests/cp/link-deref.sh: Remove the leading colon on redirections. * tests/cp/reflink-perm.sh: Likewise. * tests/id/zero.sh: Likewise. * tests/install/install-C.sh: Likewise. * tests/misc/env.sh: Likewise. * tests/misc/md5sum-bsd.sh: Likewise. * tests/misc/runcon-no-reorder.sh: Likewise. * tests/mv/partition-perm.sh: Likewise. * tests/rm/r-root.sh: Likewise. * tests/split/l-chunk.sh: Likewise. * tests/split/line-bytes.sh: Likewise. * tests/tail-2/inotify-rotate.sh: Likewise. * tests/tail-2/retry.sh: Likewise. * tests/tail-2/symlink.sh: Likewise. * tests/tail-2/wait.sh: Likewise. * tests/touch/read-only.sh: Likewise. + cfg.mk (sc_prohibit_colon_redirection): A new syntax check to avoid further instances of this creeping in.
2014-01-13maint: tests: refactor gcc commands for building shared libPádraig Brady
* init.cfg (gcc_shared_): A new function refactored from tests. (require_gcc_shared_): Adjust to call gcc_shared_() to build the test library, and remove that library before the function returns. * tests/cp/nfs-removal-race.sh: Call the new gcc_shared_(). * tests/df/no-mtab-status.sh: Likewise. * tests/df/skip-duplicates.sh: Likewise. * tests/ls/getxattr-speedup.sh: Likewise. * tests/rm/r-root.sh: Likewise.
2014-01-02maint: update all copyright year number rangesBernhard Voelker
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2013-12-09tests: fix false failure on systems without /dev/stdinPádraig Brady
* tests/rm/interactive-once.sh: Ensure the expected output matches with the output on systems without /dev/stdin (like AIX 7). Also change some fail=1 to a more appropriate framework_failure_.
2013-11-29tests: add a test for rm -r "/"Bernhard Voelker
* tests/rm/r-root.sh: Add a non-root test. * tests/local.mk (all_tests): Mention the test.
2013-11-22tests: enhance rm test regarding "." and ".."Bernhard Voelker
Recent commit 2da7009d changed the error diagnostic of rm(1) trying to remove "." or "..". Enhance the corresponding test. * tests/rm/r-4.sh: Ensure rm(1) outputs the expected error diagnostic.
2013-11-18tests: fix false rm -I test failure when run as rootPádraig Brady
Fix a recent regression introduced in commit v8.21-127-g5ee7d8f Also related to this is the recent query about root run `rm -I` ignoring the mode bits of a file: https://bugzilla.redhat.com/1013171 * tests/rm/interactive-once.sh: Avoid the messages and corresponding file presence checks with write protected files when running as root.
2013-09-26rm: with -I, prompt before deleting a write protected fileSergio Durigan Junior
This regression was introduced in commit v6.7-71-g0928c24 * src/rm.c (main): Make the -I option behave like --interactive=once. * tests/rm/interactive-once.sh: Add cases for single and multiple files. * NEWS: Mention the bug fix. Fixes http://bugs.gnu.org/9308
2013-07-19rm: output number of arguments at the interactive promptRasmus Villemoes
Include the number of arguments which rm received in the "Remove all arguments?" prompt. This is useful in the, presumably, common case where the arguments were not provided by hand, but instead were the result of various shell expansions. A simple, if somewhat contrived, example (assuming rm is aliased to rm -I) could be: rm * .o where the prompt "Remove 120 arguments?" is more likely to make the user catch the problem. * src/rm.c (main): Include correctly pluralized n_files in the output message. Also remove the now redudant "all". * tests/rm/interactive-always.sh: Adjust to the new prompt. * tests/rm/interactive-once.sh: Likewise.
2013-04-25tests: fix usage of require_ulimit_Pádraig Brady
* init.cfg (require_ulimit_v_): Renamed from require_ulimit_ as this only checks for ulimit -v support. Other uses of ulimit -t and ulimit -n in tests shouldn't cause false failures if not supported. * cfg.mk (sc_prohibit_test_ulimit_without_require_): A new syntax check to ensure that require_ulimit_v_() is used iff required. * tests/misc/head-c.sh: Add missing call to require_ulimit_v_. * tests/rm/many-dir-entries-vs-OOM.sh: Likewise. * tests/split/r-chunk.sh: Remove non mandatory require_ulimit_ call. * tests/misc/sort-merge-fdlimit.sh: Likewise. * tests/cp/link-heap.sh: Adjust to renamed require_ulimit_v_. * tests/dd/no-allocate.sh: Likewise. * tests/misc/csplit-heap.sh: Likewise. * tests/misc/cut-huge-to-eol-range.sh: Likewise. * tests/misc/printf-surprise.sh: Likewise.
2013-02-20tests: avoid false failures on file systems with smaller NAME_MAXPádraig Brady
* tests/du/long-from-unreadable.sh: This test requires a NAME_MAX of at least 200, so skip the test otherwise. * tests/rm/deep-2.sh: Likewise. Reported by C de-Avillez with ecryptfs where NAME_MAX = 143.
2013-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2012-11-24tests: accept EEXIST from rm -dPádraig Brady
* tests/rm/d-2.sh: EEXIST is a valid error on some systems. Reported by Michael Felt on AIX 6.1
2012-09-05rm: avoid bogus diagnostic for a slash-decorated symlink-to-dirJim Meyering
These commands would evoke an invalid diagnostic: $ mkdir d && ln -s d s && env rm -r s/ rm: cannot remove 's': Too many levels of symbolic links remove.c was stripping trailing slashes from "s/" before passing the name to "rm". But a trailing slash may change the semantics, and thus should not be stripped. * src/remove.c (rm_fts): Do not strip trailing slashes. * tests/rm/v-slash.sh: Adapt to new expected output. * gnulib: Update to latest, for an improved fts.c that merely normalizes trailing slashes. Reported by Paul Eggert in discussion of http://bugs.gnu.org/12339
2012-09-05build: don't use recursive make for tests/ subdirectoryStefano Lattarini
* Makefile.am (SUBDIRS): Remove 'tests'. (include): The '$(top_srcdir)/tests/local.mk' file. (check-root): Remove this convenience target, it's no longer needed now that the "real" check-root target once in 'tests/Makefile' will land in the top-level makefile. * configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'. * tests/Makefile.am: Rename ... * tests/local.mk: ... like this, with a lot of adjustments. * tests/init.cfg: Move ... * init.cfg: ... here. This is necessary, for a limitation of the gnulib-provided 'tests/init.sh', which unconditionally look for 'init.cfg' in the $(srcdir) directory. * tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests', not in '$srcdir', and extend $PATH with './src', not with '../src'. * tests/Coreutils.pm: Adjust similarly. * tests/pr/pr-tests.pl ($pfx): Likewise.
2012-08-30tests: add .sh and .pl suffixes to shell and perl tests, respectivelyStefano Lattarini
Not only this shrinks the size of the generated Makefile (from > 6300 lines to ~3000), but will allow further simplifications in future changes. * tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'. (PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to $(LOG_COMPILER) for the time being. (TESTS, root_tests): Adjust as described. * All tests: Rename as described.
2012-08-30tests: avoid use of '-T' in shebang line to enable perl taint modeStefano Lattarini
* tests/rm/fail-eperm: Rename ... * tests/rm/fail-eperm.xpl: ... like this * tests/Makefile.am (TESTS): Adjust. (TEST_EXTENSIONS): New, list '.xpl'. (XPL_TEST_LOGS): New, run a perl test in tainted mode. * tests/shell-or-perl: Simplify this script: we no longer need to parse the shebang line and adjust the flags in the perl invocation accordingly.
2012-08-23rm: fix the new --dir (-d) option to work with -iRob Day
* src/remove.c (prompt): Hoist the computation of is_empty, since we'll need it slightly earlier. Before, this function would arrange to fail with EISDIR when processing a directory without --recursive (-r). Adjust the condition to exempt an empty directory when --dir has been specified. Improve comments. * tests/rm/d-3: New file, to ensure that rm -d -i dir works. * tests/Makefile.am (TESTS): Add it. * NEWS (Bug fixes): Mention it. * THANKS.in: Update. Reported by Michael Price in http://bugs.gnu.org/12260
2012-08-14rm: new option --dir (-d) to remove empty directoriesKrzysztof Goj
Add new option to rm (-d/--dir), which allows removal of empty directories, while still safely disallowing removal of non-empty ones. This improves compatibility with Mac OS X and BSD systems, which honor the -d option. * src/remove.c (rm_fts): Remove empty directories when requested. * src/remove.h (rm_options) [remove_empty_directories]: New member. * src/rm.c (long_opts, usage, main): Update usage and option parsing. (rm_option_init): Initialize the new member. * src/mv.c (rm_option_init): Initialize the new member. * tests/rm/d-1: New test case - successfully delete empty dir. * tests/rm/d-2: New test case - refuse to delete nonempty dir. * tests/Makefile.am (TESTS): Add them.
2012-04-04tests: remove nearly all remaining backticksJim Meyering
* tests/rm/isatty: Remove now-unneeded "# `" line. * tests/misc/ls-time: Likewise. * tests/misc/date-sec: Remove stray "`" in comment. * tests/du/long-sloop: Likewise. * tests/mv/part-symlink: Replace multi-line `...` by $(...). * tests/mv/sticky-to-xpart: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/ls/nameless-uid: Likewise. * tests/cp/perm: Likewise. * tests/cp/preserve-gid: Likewise. * tests/cp/same-file: Likewise.
2012-04-04tests: convert nearly all `...` expressions to $(...)Jim Meyering
Exempt init.sh because it runs before we're assured to have a shell that groks $(...). Exempt *.mk because "$" would have to be doubled, and besides, any `...` expression in a .mk file is almost certainly evaluated before init.sh is run. Finally, also exempt the perl-based tests, because perl's `...` cannot be converted to $(...). Do that by running this command: git grep -l '`.*`' tests \ | grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \ | xargs perl -pi -e 's/`(.*?)`/\$($1)/g' One minor fix-up change was required after that, due to how quoting differs: diff --git a/tests/chmod/equals b/tests/chmod/equals - expected_perms=$(eval 'echo \$expected_'$dest) + expected_perms=$(eval 'echo $expected_'$dest) Another was to make these required quoting adjustments: diff --git a/tests/misc/stty b/tests/misc/stty ... - rev=$(eval echo "\\\$REV_$opt") + rev=$(eval echo "\$REV_$opt") ... - rev1=$(eval echo "\\\$REV_$opt1") - rev2=$(eval echo "\\\$REV_$opt2") + rev1=$(eval echo "\$REV_$opt1") + rev2=$(eval echo "\$REV_$opt2") Also, transform two files that were needlessly excluded above: (both use perl, but are mostly bourne shell) perl -pi -e 's/`(.*?)`/\$($1)/g' \ tests/du/long-from-unreadable tests/init.cfg
2012-01-27maint: use single copyright year rangeJim Meyering
Run "make update-copyright".
2012-01-23tests: remove crufty test=test_name code from old testsJim Meyering
Before init.sh and similar, we would set test=test_name, and then construct temporary file names using $test. Now that each init.sh-using test is in its own directory, that practice is unwelcome. Remove bad examples. * tests/rm/f-1: Per above. * tests/rm/i-1: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/ir-1: Likewise. * tests/rm/r-1: Likewise.
2012-01-09tests: more automated quote adjustmentJim Meyering
Relax initial regexp to match more instances, but add a filter to avoid some invalid conversions. Run this: git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \ -e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \ -e ' s/\`([^'\''"]*?'\'')/'\''$1/g' The last disjunct in the above (...) filter is to exempt any line that contains this string: '\'' With quoting like that, converting a ` to ' is likely to cause trouble, so we'll handle those manually. Here are three examples where the exemption is required: *': `link-to-dir/'\'': hard link not allowed for directory'*) ;; printf 'creating file `%s'\''\n' $f 'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
2012-01-09tests: change `...' to '...' on lines not matching /[=\$]/Jim Meyering
Exempt lines with '$' or '=', since those are prone to improper conversion. Run this: git grep -l "\`[^']*'" tests \ |xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
2012-01-09tests: adjust \`...' quoting to '...' to adapt to latest gnulibJim Meyering
Run this: git grep -l "\\\\\`[^']*'" tests \ |xargs perl -pi -e 's/\\\`(.*?'\'')/'\''$1/g
2012-01-01tests: also print chmod's --versionJim Meyering
* tests/rm/many-dir-entries-vs-OOM: This test also exercises chmod.
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-12-01tests: adjust PATH to generally include /sbin and /usr/sbinBernhard Voelker
Commit 5eeaca94 added /sbin to the PATH for tests using mkfs. For other tests, e.g. tests/cp-fiemap-perf using filefrag, we need /usr/sbin also. Add both directories generally for the tests, "since many of us always augment our PATH with all of the sbin paths all of the time anyway" (Bob in http://lists.gnu.org/archive/html/coreutils/2011-11/msg00107.html). The previous commit is hereby obsolete. * tests/init.cfg (sanitize_path_): Add /sbin and /usr/sbin to PATH unless already included. Needed for tests using admin tools like mkfs and filefrag on systems where the user's environment does not have these directories in the PATH. * tests/init.cfg (require_mkfs_PATH_): Remove obsolete function. * tests/cp/cp-a-selinux: Remove require_mkfs_PATH_ call. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/sparse-fiemap: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/rm/read-only: Likewise.
2011-11-22tests: use "compare exp out", not "compare out exp"Jim Meyering
Likewise, when an empty file is expected, use "compare /dev/null out", not "compare out /dev/null". I.e., specify the expected/desired contents via the first file name. Prompted by a suggestion from Bruno Haible in http://thread.gmane.org/gmane.comp.gnu.grep.bugs/4020/focus=29154 Run these commands: git grep -l -E 'compare [^ ]+ exp' \ |xargs perl -pi -e 's/(compare) (\S+) (exp\S*)/$1 $3 $2/' git grep -l -E 'compare [^ ]+ /dev/null' \ |xargs perl -pi -e 's/(compare) (\S+) (\/dev\/null)/$1 $3 $2/' * tests/chgrp/no-x: As above. * tests/chmod/no-x: Likewise. * tests/chmod/silent: Likewise. * tests/chmod/thru-dangling: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/preserve-root: Likewise. * tests/cp/abuse: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-a-selinux: Likewise. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/proc-zero-len: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/thru-dangling: Likewise. * tests/dd/reblock: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/bigtime: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/files0-from-dir: Likewise. * tests/du/hard-link: Likewise. * tests/du/inacc-dest: Likewise. * tests/du/inacc-dir: Likewise. * tests/du/long-sloop: Likewise. * tests/du/max-depth: Likewise. * tests/du/move-dir-while-traversing: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/one-file-system: Likewise. * tests/du/slash: Likewise. * tests/du/trailing-slash: Likewise. * tests/install/strip-program: Likewise. * tests/ln/hard-backup: Likewise. * tests/ls/block-size: Likewise. * tests/ls/color-clear-to-eol: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/color-norm: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-free-symlinks: Likewise. * tests/ls/x-option: Likewise. * tests/misc/arch: Likewise. * tests/misc/cat-buf: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/chcon: Likewise. * tests/misc/csplit: Likewise. * tests/misc/df-P: Likewise. * tests/misc/fmt-long-line: Likewise. * tests/misc/groups-dash: Likewise. * tests/misc/groups-version: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/nl: Likewise. * tests/misc/od-N: Likewise. * tests/misc/od-multiple-t: Likewise. * tests/misc/od-x8: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-option: Likewise. * tests/misc/readlink-fp-loop: Likewise. * tests/misc/runcon-no-reorder: Likewise. * tests/misc/seq-long-double: Likewise. * tests/misc/sort-NaN-infloop: Likewise. * tests/misc/sort-benchmark-random: Likewise. * tests/misc/sort-debug-keys: Likewise. * tests/misc/sort-float: Likewise. * tests/misc/sort-merge-fdlimit: Likewise. * tests/misc/sort-unique-segv: Likewise. * tests/misc/stat-hyphen: Likewise. * tests/misc/stat-slash: Likewise. * tests/misc/stdbuf: Likewise. * tests/misc/sum-sysv: Likewise. * tests/misc/tac-2-nonseekable: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/tr-case-class: Likewise. * tests/misc/truncate-fail-diag: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/selinux: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/force: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self: Likewise. * tests/mv/into-self-2: Likewise. * tests/mv/into-self-3: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/mv/trailing-slash: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/fail-eacces: Likewise. * tests/rm/i-never: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/isatty: Likewise. * tests/rm/one-file-system: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm5: Likewise. * tests/rm/unread2: Likewise. * tests/rm/v-slash: Likewise. * tests/sample-test: Likewise. * tests/split/b-chunk: Likewise. * tests/split/fail: Likewise. * tests/split/l-chunk: Likewise. * tests/split/lines: Likewise. * tests/split/r-chunk: Likewise. * tests/split/suffix-length: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/follow-name: Likewise. * tests/tail-2/follow-stdin: Likewise. * tests/tail-2/pipe-f: Likewise. * tests/tail-2/pipe-f2: Likewise. * tests/tail-2/start-middle: Likewise. * tests/touch/60-seconds: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/relative: Likewise.
2011-11-22tests: use compare, not "diff", in a few stray testsJim Meyering
* tests/install/basic-1: Use compare, not diff. * tests/mkdir/p-v: Likewise. * tests/mv/part-fail: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/touch/not-owner: Likewise.
2011-10-30tests: doc: fix stale comment in new rm/many-dir-entries-vs-OOMJim Meyering