| Age | Commit message (Collapse) | Author |
|---|
|
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
|
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Run "make update-copyright".
|
|
Run "make update-copyright".
|
|
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
|
|
Run "make update-copyright".
|
|
Automatically make all of the changes like this:
-test "$VERBOSE" = yes && chgrp --version
+print_ver_ chgrp
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
|
|
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
|
|
|
|
|
|
tree paths. In the cleanup trap, make sure `cd' succeeds before
`chmod'ing and `rm'ing the temporary files.
* tests/chgrp/basic: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chgrp/no-x: Likewise.
* tests/chgrp/posix-H: Likewise.
* tests/chgrp/recurse: Likewise.
* tests/chmod/c-option: Likewise.
* tests/chmod/equal-x: Likewise.
* tests/chmod/equals: Likewise.
* tests/chmod/inaccessible: Likewise.
* tests/chmod/no-x: Likewise.
* tests/chmod/octal: Likewise.
* tests/chmod/setgid: Likewise.
* tests/chmod/umask-x: Likewise.
* tests/chmod/usage: Likewise.
* tests/chown/basic: Likewise.
* tests/chown/deref: Likewise.
* tests/chown/separator: Likewise.
* tests/cp/acl: Likewise.
* tests/cp/backup-1: Likewise.
* tests/cp/backup-dir: Likewise.
* tests/cp/backup-is-src: Likewise.
* tests/cp/cp-HL: Likewise.
* tests/cp/cp-deref: Likewise.
* tests/cp/cp-i: Likewise.
* tests/cp/cp-mv-backup: Likewise.
* tests/cp/cp-parents: Likewise.
* tests/cp/deref-slink: Likewise.
* tests/cp/dir-rm-dest: Likewise.
* tests/cp/dir-slash: Likewise.
* tests/cp/dir-vs-file: Likewise.
* tests/cp/fail-perm: Likewise.
* tests/cp/into-self: Likewise.
* tests/cp/link: Likewise.
* tests/cp/link-no-deref: Likewise.
* tests/cp/link-preserve: Likewise.
* tests/cp/no-deref-link1: Likewise.
* tests/cp/no-deref-link2: Likewise.
* tests/cp/no-deref-link3: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/cp/r-vs-symlink: Likewise.
* tests/cp/same-file: Likewise.
* tests/cp/slink-2-slink: Likewise.
* tests/cp/sparse: Likewise.
* tests/cp/special-bits: Likewise.
* tests/cp/src-base-dot: Likewise.
* tests/cp/symlink-slash: Likewise.
* tests/dd/not-rewound: Likewise.
* tests/dd/skip-seek2: Likewise.
* tests/dd/unblock-sync: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/basic: Likewise.
* tests/du/deref: Likewise.
* tests/du/deref-args: Likewise.
* tests/du/exclude: Likewise.
* tests/du/fd-leak: Likewise.
* tests/du/hard-link: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/no-deref: Likewise.
* tests/du/no-x: Likewise.
* tests/du/restore-wd: Likewise.
* tests/du/slash: Likewise.
* tests/du/slink: Likewise.
* tests/du/trailing-slash: Likewise.
* tests/du/two-args: Likewise.
* tests/fmt/long-line: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/create-leading: Likewise.
* tests/install/d-slashdot: Likewise.
* tests/install/trap: Likewise.
* tests/ln/misc: Likewise.
* tests/ln/target-1: Likewise.
* tests/ls/color-dtype-dir: Likewise.
* tests/ls/dangle: Likewise.
* tests/ls/dired: Likewise.
* tests/ls/file-type: Likewise.
* tests/ls/follow-slink: Likewise.
* tests/ls/infloop: Likewise.
* tests/ls/inode: Likewise.
* tests/ls/m-option: Likewise.
* tests/ls/no-arg: Likewise.
* tests/ls/recursive: Likewise.
* tests/ls/rt-1: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/ls/stat-failed: Likewise.
* tests/ls/stat-vs-dirent: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/misc/csplit: Likewise.
* tests/misc/date-sec: Likewise.
* tests/misc/false-status: Likewise.
* tests/misc/head-c: Likewise.
* tests/misc/head-pos: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/nl: Likewise.
* tests/misc/nohup: Likewise.
* tests/misc/pathchk1: Likewise.
* tests/misc/printf: Likewise.
* tests/misc/printf-hex: Likewise.
* tests/misc/pwd-long: Likewise.
* tests/misc/shuf: Likewise.
* tests/misc/sort-rand: Likewise.
* tests/misc/split-a: Likewise.
* tests/misc/split-fail: Likewise.
* tests/misc/split-l: Likewise.
* tests/misc/stat-fmt: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/wc-files0: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-2: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/p-slashdot: Likewise.
* tests/mkdir/p-thru-slink: Likewise.
* tests/mkdir/p-v: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mkdir/t-slash: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/atomic: Likewise.
* tests/mv/backup-dir: Likewise.
* tests/mv/childproof: Likewise.
* tests/mv/diag: Likewise.
* tests/mv/dir-file: Likewise.
* tests/mv/dir2dir: Likewise.
* tests/mv/dup-source: Likewise.
* tests/mv/hard-2: Likewise.
* tests/mv/hard-3: Likewise.
* tests/mv/hard-4: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/hard-verbose: Likewise.
* tests/mv/i-2: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/i-4: Likewise.
* tests/mv/i-5: Likewise.
* tests/mv/i-link-no: Likewise.
* tests/mv/into-self-4: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/no-target-dir: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/perm-1: Likewise.
* tests/mv/reply-no: Likewise.
* tests/mv/trailing-slash: Likewise.
* tests/mv/update: Likewise.
* tests/od/od-N: Likewise.
* tests/od/x8: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/readlink/rl-1: Likewise.
* tests/rm/cycle: Likewise.
* tests/rm/dangling-symlink: Likewise.
* tests/rm/deep-1: Likewise.
* tests/rm/dir-no-w: Likewise.
* tests/rm/dir-nonrecur: Likewise.
* tests/rm/dot-rel: Likewise.
* tests/rm/empty-inacc: Likewise.
* tests/rm/f-1: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/hash: Likewise.
* tests/rm/i-1: Likewise.
* tests/rm/i-no-r: Likewise.
* tests/rm/ignorable: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/ir-1: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/r-1: Likewise.
* tests/rm/r-2: Likewise.
* tests/rm/r-3: Likewise.
* tests/rm/r-4: Likewise.
* tests/rm/readdir-bug: Likewise.
* tests/rm/rm1: Likewise.
* tests/rm/rm2: Likewise.
* tests/rm/rm3: Likewise.
* tests/rm/rm4: Likewise.
* tests/rm/rm5: Likewise.
* tests/rm/sunos-1: Likewise.
* tests/rm/unread2: Likewise.
* tests/rm/unread3: Likewise.
* tests/rmdir/fail-perm: Likewise.
* tests/rmdir/t-slash: Likewise.
* tests/shred/exact: Likewise.
* tests/shred/remove: Likewise.
* tests/sum/sysv: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/assert: Likewise.
* tests/tail-2/assert-2: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/fflush: Likewise.
* tests/tail-2/infloop-1: Likewise.
* tests/tail-2/proc-ksyms: Likewise.
* tests/tail-2/start-middle: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/tee/basic: Likewise.
* tests/tee/dash: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
|
|
|
|
|
