| Age | Commit message (Collapse) | Author |
|---|
|
* src/stat.c (do_stat): Interpret a command line argument of "-"
to mean "standard input", like many other tools do.
(do_statfs): Fail upon any attempt to use "-".
* NEWS (Changes in behavior): Mention it.
* tests/misc/stat-hyphen: New test, to exercise the above.
* tests/Makefile.am (TESTS): Add misc/stat-hyphen.
|
|
* tests/misc/sort-continue: Change first line to standard #!/bin/sh,
not #!/bin/bash (though it doesn't matter, since each is invoked
via $(SHELL) dir/test-name.
|
|
* src/copy.c (copy_reg): Temporarily set u+rw on the destination file
to allow GNU/Linux to set xattrs.
* tests/misc/xattr: Test that change.
* NEWS (Bug fixes): Mention it.
Reported by Ernest N. Mamikonyan.
|
|
* tests/misc/cat-buf: Increase the delay between writes
to decrease the chance that dd will read both at once.
Since the test is inherently racy, print a warning via
skip_test_ rather than failing outright.
Reported by Jim Meyering.
|
|
* tests/misc/cat-buf: Don't suppress dd's stderr.
Remove useless quotes.
|
|
* tests/misc/ls-misc: Set umask to 022. A umask setting permitting
world-write access, e.g., umask o+w, would cause this test to fail.
Report by Mathias Brodala and analysis by Tom Fitzhenry in
<http://bugs.debian.org/544965>.
|
|
* tests/misc/xattr: Add quotes.
* tests/mv/acl: Likewise.
* tests/mv/backup-is-src: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
|
|
* src/dd.c (maybe_close_stdout): Always flush stderr; regression
introduced in commit 381e69ea.
* tests/misc/close-stdout (p): Use consistent style.
* tests/dd/stderr: New test, borrowing from misc/close-stdout.
* tests/Makefile.am (TESTS): Run it.
* NEWS: Mention this.
|
|
Transformed via this shell code:
t=$'\t'
git ls-files \
| grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \
| grep -vE 'tests/pr/|help2man' \
| xargs grep -lE "^ *$t" \
| xargs perl -MText::Tabs -ni -le \
'$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
|
|
* tests/misc/stdbuf: Avoid spurious failure when the directory name
from which we'd set LD_PRELOAD contains unsafe characters.
|
|
* tests/misc/stdbuf: Use skip_test_ only after it's defined.
Reported by Berhnard Voelker.
(sc_check-AUTHORS): Rename rule from check-AUTHORS.
|
|
* tests/misc/stdbuf: Skip this test when stdbuf is not built.
Reported by Eric Blake.
|
|
* tests/misc/ls-misc (multi-arg-U1): New test.
|
|
* src/sort.c: Store the si_present state per key rather than globally
* tests/misc/sort: Add a check that would have previously failed.
Also add a test to demonstrate that invalid IEC/SI mixtures are not
always noticed when they're not significant to the sort.
|
|
* src/stdbuf.c (main): Fix the array bounds check in the assert
* tests/misc/stdbuf: Add a test for all standard streams
|
|
|
|
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add stdbuf command to list.
* configure.ac: Only enable on ELF systems with GCC.
* cfg.mk (sc_system_h_headers): Use VC_LIST_EXCEPT rather than
VC_LIST, so we can add an exception, if needed.
* .x-sc_system_h_headers: New file. Exempt libstdbuf.c.
* Makefile.am (syntax_check_exceptions): Add .x-sc_system_h_headers.
* doc/coreutils.texi (stdbuf invocation): Add stdbuf info.
* man/.gitignore: Ignore generated manpage.
* src/.gitignore: Ignore stdbuf and libstdbuf.so binaries.
* man/Makefile.am (stdbuf.1): Add dependency.
* man/stdbuf.x: New file with example usage.
* po/POTFILES.in: Reference new command and shared library sources.
* src/Makefile.am (build_if_possible__progs): Add stdbuf and libstdbuf,
(pkglib_PROGRAMS): Reference optional shared lib,
(libstdbuf_so_LDADD): Ensure we don't link with non PIC libcoreutils.a.
(libstdbuf_so_LDFLAGS): Add -shared GCC option,
(libstdbuf_so_CFLAGS): Add -fPIC GCC option.
(check-README): Exclude libstbuf.
(check-AUTHORS): ditto.
(sc_tight_scope): Exclude functions starting with __.
* src/libstdbuf.c: The LD_PRELOAD shared library to control buffering.
* src/stdbuf.c: New file to setup env variables before execing command.
* tests/Makefile.am: Reference new test file.
* tests/misc/help-version: Set expected exit codes.
* tests/misc/invalid-opt: ditto.
* tests/misc/stdbuf: Add 9 tests.
|
|
* NEWS: Mention the fix
* THANKS: Add Cliff Miller
* src/sort.c (keycompare): Ensure lima >= texta
* tests/misc/sort: Add 3 corresponding tests
Signed-off-by: Pádraig Brady <P@draigBrady.com>
|
|
* NEWS: Document the new option
* doc/coreutils.texi (sort invocation): ditto
* src/sort.c (main): handle the new --human-numeric-sort option (-h).
(human_numcompare): A new function to compare SI and IEC suffixes
before falling back to the standard --numeric comparison.
(find_unit_order): A new helper function to find the order
of magnitude of a number string as determined by its suffix.
(check_mixed_SI_IEC): A new helper function to exit with error
if both SI and IEC suffixes are presented.
* tests/misc/sort: Add 8 tests to test the new functionality.
* THANKS: Update
|
|
* tests/misc/date-next-dow: In the strftime call use %Y-%m-%d
rather than the newer %F equivalent which is not available
on Solaris 8 for example.
|
|
* tests/misc/date-next-dow: New file.
* tests/Makefile.am (TESTS): Add misc/date-next-dow.
* gnulib: Update submodule to latest, for getdate.y that
handles "next Monday" properly when run on a Monday.
|
|
* tests/misc/sort: Remove one of the generated tests.
363 remain in this file alone.
|
|
* src/sort.c (avoid_trashing_input): Fix an off-by-one error and
guard the use of memmove.
* NEWS (Bug fixes): Mention it.
* tests/misc/sort: Add tests to exercise the offending code.
* THANKS: Update.
Reported by Otavio Salvador in http://bugs.debian.org/525048.
|
|
* tests/misc/ls-misc (make_j_d): Rename latter $e to $env
|
|
Steven Parkes reported that `id -G $USER` went into an infinite loop
on Darwin systems for users in more than 10 groups:
http://bugs.gentoo.org/show_bug.cgi?id=264007
* gl/lib/mgetgroups.c (mgetgroups): Work around buggy getgrouplist
implementations that don't update the required size correctly,
by doubling the result buffer and retrying. Also return the
parameter updated by getgrouplist rather than its return value,
as the documentation doesn't actually state the number of groups
stored is returned by getgrouplist.
* tests/misc/id-groups: Add test to exercise this logic
* tests/Makefile.am: Reference new test
* NEWS: Mention the fix
* THANKS: Update
|
|
* tests/sample-test: Don't recommend using lang-default here.
It is now run for each test automatically, via TESTS_ENVIRONMENT.
* tests/dd/reblock: Don't source lang-default here.
* tests/misc/truncate-fail-diag: Likewise.
|
|
* src/pwd.c (longopts): New variable.
(logical_getcwd): New function.
(main): Use it.
(usage): Document new options.
* doc/coreutils.texi (pwd invocation): Likewise.
* NEWS: Likewise.
* TODO (pwd): Mark it done.
* tests/misc/pwd-option: New file.
* tests/Makefile.am (TESTS): Add test.
* THANKS: Update.
Reported by Paul D. Smith, in savannah bug 24949.
|
|
* tests/misc/ls-misc: Add names with ~ and ~.1~ suffixes.
|
|
* tests/misc/sort-continue: Don't run cat inside fd-limited shell.
If sort fails to run in an fd-limited shell, skip the test.
|
|
* tests/Makefile.am (TESTS): Add sort-merge-fdlimit.
* tests/misc/sort-merge-fdlimit: New file.
* doc/coreutils.texi (sort invocation): Document that we now silently
lower nmerge if necessary.
Patch by Paul Eggert, Nima Nikzad, Max Chang, Alexander Nguyen,
Sahil Amoli, and Nick Graham.
|
|
This is an alternative to my 9 March patch labeled "Silently lower
nmerge; don't (sometimes incorrectly) range-check"
<http://lists.gnu.org/archive/html/bug-coreutils/2009-03/msg00070.html>.
It differs by not using 'dup' to probe for extra file descriptors;
instead, it simply calls 'open' (and 'pipe') to open files and pipes,
until one of these calls fails due to file descriptor exhaustion; it
then backs off by 1, does a merge with the files that it has opened,
and then retries with the (now-smaller) number of files.
This patch requires quite a few more changes to the source code than
the earlier patch, but it is in some sense "better" because it doesn't
need to call "dup" ahead of time in order to decide whether "open" or
"pipe" will fail. Also, it's more robust in the case where "open" or
"pipe" fails with errno==EMFILE because some system-wide limit is
exhausted.
* src/sort.c (create_temp_file): New arg SURVIVE_FD_EXHAUSTION.
(stream_open): New function, containing guts of xfopen.
(xfopen): Use it.
(pipe_fork): Set errno on failure.
(maybe_create_temp): New function, containing guts of create_temp.
(create_temp): Use it.
(open_temp): Distinguish failures due to file descriptor exhaustion
from other failures, and on fd exhaustion return a notice to caller
rather than dying. Don't test execlp's return value; when it returns,
it *always* returns -1.
(open_input_files): New function.
(mergefps): New arg FPS. It's now the caller's responsibility to open
the input and output files. All callers changed.
(mergefiles): New function.
(avoid_trashing_input, merge): Handle the case where a single merge
can't merge as much as we wanted due to file descriptor exhaustion, by
merging as much as we can and then retrying.
* tests/Makefile.am (TESTS): Add misc/sort-continue.
* tests/misc/sort-continue: New file.
* THANKS: Add Glen Lenker and Matt Pham who coauthored this patch.
|
|
* tests/misc/groups-version: groups is now independent of id.
|
|
* tests/misc/groups-dash: Skip if groups is not being installed.
Suggested by Mike Frysinger.
Also fail if groups exits with nonzero status.
|
|
* copy.c (copy_attr_by_fd): Reduce xattr diagnostics for 'cp -a'.
(copy_attr_by_name): Likewise.
* cp.c (main): Preserve xattrs with -a option, when possible.
* doc/coreutils.texi: Document that xattrs are preserved with
cp -a, with no added diagnostics.
* NEWS: Mention the change.
* tests/misc/xattr: Add tests for 'cp --preserve=all' and 'cp -a'.
|
|
Introduced by commit 790892db, 2006-06-08 "Ensure that cat works ...".
* NEWS: Mention the bugfix.
* src/cat.c (cat): Fix the typo which stopped the writing
of processed data before a blocking read() is done.
* tests/misc/cat-buf: Add to ensure processed data is not buffered.
* tests/Makefile.am: Reference the new test.
|
|
* tests/misc/comm (ooo-prefix): Add a test for today's fix.
* NEWS (Bug fixes): Mention it.
|
|
* tests/misc/ls-misc (version-sort): New test.
(mk_file): New function.
Reported by Josh Triplett in <http://bugs.debian.org/517558>.
Details in http://thread.gmane.org/gmane.comp.lib.gnulib.bugs/16902
* NEWS (Bug fixes): Mention it.
|
|
* tests/test-lib.sh: Redirect also to descriptor 9.
Better one-line why-skip diagnostics.
* tests/check.mk (TESTS_ENVIRONMENT): Redirect 9 to stderr.
* tests/misc/pwd-unreadable-parent: Remove redundant "skipping..." diag.
|
|
* tests/misc/sort: On Fedora 8 at least, sort -k1b,1
mishandles blanks in multibyte locales, so add test.
|
|
* tests/misc/stty-row-col: Don't hang when run in background
at least on Solaris 10 and OpenBSD.
|
|
* src/sort.c: When no specific number of chars to skip
is specified for the end field, always skip the whole field.
Also never include leading spaces from next field.
* tests/misc/sort: Add 2 new tests for these cases.
* NEWS: Mention this bug fix.
* THANKS: Add bug reporter.
Reported by Davide Canova.
|
|
Revert "tests: skip newly-modified tests unconditionally..."
This reverts commit 773a88d33f68e50a2919c8a8310c646a7e5fabc2.
* tests/misc/stty: Don't skip.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Likewise.
|
|
* tests/misc/stty-invalid: Skip.
* tests/misc/stty: Likewise.
* tests/mv/i-3: Likewise.
|
|
Running "make check &" would hang due to SIGTTOU and SIGTTIN signals.
* tests/misc/stty: Ignore SIGTTOU.
* tests/misc/stty-invalid: Likewise.
* tests/mv/i-3: Ignore SIGTTIN.
|
|
* NEWS: Add 2009 to copyright.
* README: Likewise.
* README-hacking: Likewise.
* TODO: Likewise.
* doc/Makefile.am: Likewise.
* m4/prereq.m4: Likewise.
* src/nl.c: Likewise.
* src/seq.c: Likewise.
* tests/cp/cp-i: Likewise.
* tests/install/install-C: Likewise.
* tests/install/install-C-root: Likewise.
* tests/install/install-C-selinux: Likewise.
* tests/misc/seq: Likewise.
* tests/mv/mv-n: Likewise.
|
|
Issue reported by Samuel Hapák.
<http://lists.gnu.org/archive/html/bug-coreutils/2009-02/msg00139.html>
* src/seq.c: Account for '.' added to "last" number.
* tests/misc/seq: Add corresponding test.
* NEWS: Mention the fix.
|
|
This patch was originally written by Andreas Grünbacher, nowadays
available at
http://www.suse.de/~agruen/coreutils/5.91/coreutils-xattr.diff
* bootstrap.conf: Add gnulib module verror.
* po/POTFILES.in: Add lib/verror.c.
* m4/xattr.m4: Check for libattr availability, new configure option
--disable-xattr.
* m4/prereq.m4: Require gl_FUNC_XATTR.
* src/Makefile.am: Link cp, mv and ginstall with libattr.
* src/copy.h: Add preserve_xattr and require_preserve_xattr to
cp_options.
* src/copy.c (copy_attr_error): New function to handle errors during
xattr copying.
(copy_attr_quote): New function to quote file name in error messages
printed by libattr.
(copy_attr_free): Empty function requested by libattr to free quoted
string.
(copy_attr_by_fd): New fd-oriented function to copy xattr.
(copy_attr_by_name): New name-oriented function to copy xattr.
(copy_reg, copy_internal): Call copy_extended_attributes function.
* src/cp.c (usage): Mention new --preserve=xattr option.
(decode_preserve_arg): Handle new --preserve=xattr option.
* src/mv.c: Always attempt to preserve xattr.
* src/install.c: Never attempt to preserve xattr.
* tests/misc/xattr: New test for xattr support in cp, mv and install.
* tests/Makefile.am: Add the new test to list.
* doc/coreutils.texi: Mention xattr support, new --preserve=xattr
option.
* NEWS: Mention the change.
|
|
* tests/misc/shred-passes: Set the $fail variable correctly.
The issue was noticed by Jim Meyering.
|
|
* tests/Makefile.am: add new test
* tests/misc/shred-passes: Verify the operations shred
does by default to overwrite and remove a zero length file.
|
|
* tests/Coreutils.pm: Add function to make limits available
* tests/test-lib.sh: ditto
* tests/misc/join: Check for both SIZE_OFLOW and UINTMAX_OFLOW
rather than using arbitrary 2^128
* tests/misc/sort: ditto
* tests/misc/uniq: ditto
* tests/misc/printf: Check for both INT_OFLOW and INT_UFLOW
rather than using arbitrary -2^31
* tests/misc/seq-long-double: Check for INTMAX_OFLOW
rather than using arbitrary 2^63
* tests/misc/split-fail: Check --lines --bytes and --line-bytes
options limits on all platforms. Note getlimits obviates the
need to use expr to check if 32 bit integers are supported,
which I think was invalid anyway as expr now supports bignum?
* tests/misc/test: Check for UINTMAX_OFLOW rather than
using arbitrary 2^64 and 2^128. Check for INTMAX_UFLOW
rather than using arbitrary -2^64
* tests/misc/timeout-parameters: Check for UINT_OFLOW
rather than using arbitrary 2^32
* tests/misc/truncate-overflow: Don't depend on truncate
to determine if we're on a 32 or 64 bit platform and
instead use the various OFF_T limits
* tests/misc/sort-merge: Check for UINTMAX_OFLOW
rather than using arbitrary 2^64+1
* tests/misc/unexpand: ditto
|
