| Age | Commit message (Collapse) | Author |
|---|
|
Ensure I/O errors are detected (and terminate seq), preventing seq
from infloop (or running for long time with a large
range) upon write errors or ignored SIGPIPE. Examples:
seq 1 inf > /dev/full (seq_fast)
seq 1.1 0.1 inf >/dev/full (print_numbers)
* src/seq.c (io_error): A new function to diagnose appropriate
stdio errors and exit the program with failure status.
(seq_fast, print_numbers): Explicitly check for write errors
and terminate the program with diagnostic.
* tests/misc/seq-io-errors.sh: Test error detection with /dev/full.
* tests/misc/seq-epipe.sh: Test error detection with broken pipes.
* tests/local.mk: Add new tests.
* NEWS: Mention the fix.
|
|
* src/yes.c (main): For large inputs only write a single
diagnostic for write errors.
* tests/misc/yes.sh: Test when /dev/full is available.
|
|
* src/sleep.c (main): Allow ERANGE since we allow "inf" values.
* src/timeout.c (parse_duration): Likewise.
* tests/misc/sleep.sh: New file. Tests for sleep(1).
* tests/misc/timeout-parameters.sh: Add case for newly allowed
$LDBL_MAX. Also use returns_ throughout the file. Also avoid
small timeout values which might give false failures under load.
|
|
* cfg.mk (sc_prohibit_expr_unsigned): expr uses intmax_t internally
when GMP is not available, so flag any uses of unsigned limits.
* tests/misc/timeout-parameters.sh: Remove the overflow related
to UINT_MAX as it's handled by the following case. Change the
following case from 99... to $TIME_T_OFLOW to be more expressive
in what it's actually testing. Directly check that commands succeed,
rather than inspecting $? afterwards.
* tests/dd/skip-seek-past-dev.sh: Guard against large device sizes.
* tests/id/setgid.sh: Protect: Guard against large group IDs.
* tests/misc/cut-huge-range.sh: Tweak comment to avoid syntax check.
It's tempting to simplify to just skip the test if expr fails,
but SIZE_MAX > INTMAX_MAX is the common case.
|
|
* src/seq.c (isnan): Define macro.
(scan_arg): Add check if the given argument is NaN, and exit with
a proper error diagnostic in such a case.
(usage): Document it.
* tests/misc/seq.pl: Add tests.
* doc/coreutils.texi (seq invocation): Document the change.
* NEWS (Changes in behavior): Mention the change.
|
|
* src/seq.c (main): Exit with an error diagnostic when the given
step value is Zero.
(usage): Document it.
* doc/coreutils.texi (seq invocation): Likewise.
* tests/misc/seq.pl: Add tests.
* NEWS (Changes in behavior): Mention the change.
Reported by Маренков Евгений in:
http://bugs.gnu.org/23110
|
|
The problematic code computed a struct tm in one time zone, and
then printed it or converted it to a string in another. To be
portable the same time zone needs to be used for both operations.
On GNU platforms this is not an issue, but incorrect output can be
generated on System V style platforms like AIX where time zone
abbreviations are available only in the 'tzname' global variable.
Problem reported by Assaf Gordon in: http://bugs.gnu.org/23035
* NEWS: Document the bug.
* src/date.c (show_date):
* src/ls.c (long_time_expected_width, print_long_format):
* src/pr.c (init_header):
* src/stat.c (human_time): Use localtime_rz instead of localtime,
so that the time zone information is consistent for both localtime
and time-formatting functions like fprintftime and nstrftime. For
'stat' this change is mostly just a code cleanup but it also
causes stat to also print nanoseconds when printing time stamps
that are out of localtime range, as this is more consistent with
what other programs do. For programs other than 'stat' this fixes
bugs with time zone formats that use %Z.
* src/du.c, src/pr.c (localtz): New static var.
(main): Initialize it.
* src/du.c (show_date): New time zone argument, so that localtime
and fprintftime use the same time zone information. All callers
changed.
* tests/misc/time-style.sh: New file.
* tests/local.mk (all_tests): Add it.
* tests/misc/date.pl: Test alphabetic time zone abbreviations.
|
|
sort, tail, and uniq now support traditional usage like 'sort +2'
and 'tail +10' on systems conforming to POSIX 1003.1-2008 and later.
* NEWS: Document this.
* doc/coreutils.texi (Standards conformance, tail invocation)
(sort invocation, uniq invocation, touch invocation):
Document new behavior, or behavior's dependence on POSIX 1003.1-2001.
* src/sort.c (struct keyfield.traditional_used):
Rename from obsolete_used, since implementations are now allowed
to support it. All uses changed.
(main): Allow traditional usage if _POSIX2_VERSION is 200809.
* src/tail.c (parse_obsolete_option): Distinguish between
traditional usage (which POSIX 2008 and later allows) and obsolete
(which it still does not).
* src/uniq.c (strict_posix2): New function.
(main): Allow traditional usage if _POSIX2_VERSION is 200809.
* tests/misc/tail.pl: Test for new behavior.
|
|
* tests/misc/shred-passes.sh: Specify an exact amount to shred,
to avoid running out of simulated random data on file systems
with a large st_blksize like GPFS for example.
Reported by Assaf Gordon.
|
|
* tests/misc/head-c.sh: Further increase the limit to 8MB over
the base test command. 5.1MB was seen as minimum extra needed
on FreeBSD 9.3 x86_64.
|
|
* tests/misc/date.pl: This test was dependent on perl
unconditionally calling the system localtime() as date(1) does.
However perl has its own configure checks in place to avoid buggy
localtime implementations. Therefore comment out this test
as a FIXME for now. This test was seen to fail on FreeBSD 10
where localtime() returns nonsense values instead of failing
for arguments >= 2^56.
|
|
* tests/misc/head-c.sh: Further increase the limit, to account
for the fact that head(1) needs at least 1.576MB over the base test
command on FreeBSD 10. 4MB should be enough headroom while
still providing over allocation protection.
Reported by Assaf Gordon.
|
|
* src/operand2sig.c (operand2sig): Add a detailed comment explaining
why we validate even very large shell exit status values.
* tests/misc/kill.sh: Add a test case for the ksh scheme.
Simplify the INVALID signal number determination which also avoids
a false failure on systems like FreeBSD 10 with incomplete
signal list (caused by inaccurate NSIG).
|
|
* tests/misc/wc-files0.sh: $fail is always set to 0,
so correct the test to include that part of the test case.
|
|
* src/wc.c (write_counts): Shell escape the file name
if it contains '\n' so only a single line per file is output.
* tests/misc/wc-files0.sh: Add a test case.
* NEWS: Mention the improvement.
|
|
* doc/coreutils.texi (numfmt invocation): Reference the description.
* src/numfmt.c: Parameterize '\n' references.
* tests/misc/numfmt.pl: Add tests for character and field processing.
* NEWS: Mention the new feature.
|
|
* doc/coreutils.texi (paste invocation): Reference -z description.
* src/paste.c (main): Parameterize the use of '\n'.
* tests/misc/paste.pl: Add test cases.
* NEWS: Mention the new feature.
|
|
* src/comm.c (main): Track the output delimiter length,
so that it can be adjusted to 1 for the NUL delimiter.
Also rename the global variable from "delimiter" to
"col_sep" so its use is more obvious, and to distinguish
from the recently added "delim" global variable.
* tests/misc/comm.pl: Adjust accordingly.
|
|
* doc/coreutils.texi (comm invocation): Reference option description.
* src/comm.c (main): Use readlinebuffer_delim() to support
a parameterized delimiter.
* tests/misc/comm.pl: Add test cases.
* NEWS: Mention the new feature.
|
|
* doc/coreutils.texi (tac invocation): Mention the
NUL delineation with an empty --separator.
* src/tac.c (main): Allow an empty separator when -r not specified.
* tests/misc/tac.pl: Add test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/8103
|
|
* doc/coreutils.texi (cut invocation): Reference the description.
* src/cut.c: Parameterize '\n' references.
* tests/misc/cut.pl: Add tests for character and field processing.
* NEWS: Mention the new feature.
|
|
* doc/coreutils.texi: Reference the option description.
* src/head.c: Parameterize the delimiter character.
* src/tail.c: Likewise.
* tests/misc/head.pl: Add test case.
* tests/misc/tail.pl: Likewise.
* NEWS: Mention the new feature.
|
|
* NEWS: Mention the change in behavior.
* doc/coreutils.texi (newlineFieldSeparator): A new description,
referenced from ({join,sort,uniq} invocation).
* src/system.h (field_sep): A new inline function to determine
if a character is a field separator.
* src/join.c (usage): s/whitespace/blank/ to be more accurate
wrt which characters are field separators.
(xfields): s/isblank/field_sep/.
* src/sort.c (inittables): Likewise.
* src/uniq.c (find_field): Likewise.
* tests/misc/join.pl: Adjust -z test, and add a test/example
for processing the whole record with field processing.
* tests/misc/sort.pl: Add -z test cases, including case with '\n'.
* tests/misc/uniq.pl: Add -z -f test case with \n.
|
|
At least the false positive in tail-2/follow-stdin.sh could be seen
on a 4-core i5 system with -j8. Fix similar cases. too.
* tests/tail-2/follow-stdin.sh: Empty the 'out' file in each iteration.
Otherwise, under heavy system load, 'check_tail_output' would see the
expected output from the previous round before tail would have the
chance to come up in the background.
While at it, move the creation of the 'exp' file out of the loop.
* tests/dd/stats.sh: Empty the output file of the background process
here, too.
* tests/misc/cat-buf.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/tail-2/wait.sh: Likewise.
|
|
Instead of commit v8.24-132-g5171bef which only provides
control to disable this behavior (with -I), provide
the symmetrical "[-]drain" special setting.
* src/stty.c (main): Parse the [-]drain setting instead of -I,
and treat like a global option.
(usage): Adjust accordingly.
* tests/misc/stty.sh: Test "drain" with and without options.
* NEWS: Mention the new feature.
|
|
In some cases an initial drain may block indefinitely as discussed at:
http://lists.gnu.org/archive/html/coreutils/2016-01/msg00007.html
* src/stty.c (main): Use TCSANOW rather than TCSADRAIN if -I specified.
(usage): Document the new option.
* doc/coreutils.texi (stty invocation): Likewise.
* tests/misc/stty.sh: Ensure -I is supported.
* NEWS: Mention the new feature.
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
* init.cfg (get_min_ulimit_v_): Increase the determined
virtual memory limit for the command by a page size
to avoid alignment issues causing false failures for
subsequent runs.
* tests/misc/cut-huge-range.sh: Be defensive and match
the cut invocations under test, more closely with the
form used to determine the VM memory limit.
This was noticed on i686 linux at:
http://hydra.nixos.org/build/28990456
|
|
* cfg.mk (sc_prohibit_and_fail_1): Remove 'env' from
the exclusion list.
* tests/misc/env.sh: Adjust accordingly.
* tests/misc/help-version.sh: Likewise.
|
|
* tests/misc/kill.sh:
- verify kill -[lt] support multiple parameters.
- verify kill -[lt] fail with (some) invalid parameters.
- Use returns_1 ... || fail=1, rather than ... && fail=1.
|
|
We were erroneously skipping blanks in the marked comparison
_after_ the key start offset was applied.
* src/sort.c (debug_keys): Don't skip starting blanks
if already handled by begfield().
* tests/misc/sort-debug-keys.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/22155
|
|
procps, bash >= 4.4, and util-linux >= 2.23
all have the -L option to output a table.
* src/kill.c (main): Have -L synonymous with -t.
Luckily there is no signal that begins with 'L'.
* tests/misc/kill.sh: Update the test.
|
|
* tests/misc/kill.sh: Add first tests for kill.
* tests/local.mk: Reference the new test.
|
|
* NEWS: Use a standard version specification.
* doc/coreutils.texi: Fix incorrect grammar.
* src/df.c: Update a stale comment.
* src/copy.c: Fix incorrect spellings.
* src/factor.c: Likewise.
* src/ls.c: Likewise.
* src/pr.c: Likewise.
* src/relpath.c: Likewise.
* src/shred.c: Likewise.
* src/sort.c: Likewise.
* src/split.c: Likewise.
* src/stdbuf.c: Likewise.
* tests/misc/seq-precision.sh: Likewise.
|
|
* src/md5sum.c (digest_check): Update a matched_checksums bool upon
matched checksum, and fail (loudly unless --status is specified)
if there were no matches. Also change properly_formatted_lines
to a bool while at it since we don't need to track the plurality.
* tests/misc/md5sum.pl: Add a test case.
Suggested by Jim Meyering.
|
|
* doc/coreutils.texi (md5sum invocation): Document the new option.
* src/md5sum.c (digest_file): Return an empty digest to indicate
a missing file.
(digest_check): Don't fail or output status given an empty checksum.
(usage): Document the new option.
(main): Process and validate the new option.
* tests/misc/md5sum.pl: Add new test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/15604
|
|
discussed in:
http://lists.gnu.org/archive/html/coreutils/2015-10/msg00091.html
* src/csplit.c: (save_line_to_file): check fwrite failures, report
and exit immediately instead of deferring to 'close_output'.
* tests/misc/csplit-io-err.sh: test fwrite failure using LD_PRELOAD.
* tests/local.mk: add new test.
|
|
programs may not be built due to missing system dependencies,
or any program can be excluded at configure time with
--enable-no-install-program. So ensure we're not testing the
system versions in these cases.
* init.cfg (print_ver_): Call require_built_ first.
* tests/misc/tty-eof.pl: Skip programs not built.
* tests/Coreutils.pm (run_tests): Likewise.
* tests/misc/ls-misc.pl: Use 'env test' rather than abs path.
* tests/misc/test-diag.pl: Likewise.
* tests/local.mk: Adjust include order for dependencies.
* tests/misc/arch.sh: Remove redundant calls to require_built_.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/groups-dash.sh: Likewise.
* tests/misc/groups-version.sh: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/cp/acl.sh: Remove problematic call to print_ver_ [gs]etfacl.
* tests/mv/acl.sh: Likewise.
* cfg.mk (sc_env_test_dependencies): A new syntax check to enforce
specifying dependencies with print_ver_ for programs
specified through the env command.
* du/bigtime.sh: Add new print_ver_ dependencies.
* du/max-depth.sh: Likewise.
* dd/ascii.sh: Likewise.
* tests/ls/capability.sh: Likewise.
* tests/ls/root-rel-symlink-color.sh: Likewise.
* tests/misc/chroot-fail.sh: Likewise.
* tests/misc/readlink-fp-loop.sh: Likewise.
* tests/misc/sort-debug-keys.sh: Likewise.
* tests/readlink/can-e.sh: Likewise.
* tests/readlink/can-f.sh: Likewise.
* tests/readlink/can-m.sh: Likewise.
* tests/tail-2/inotify-race.sh: Likewise.
* tests/tail-2/inotify-race2.sh: Likewise.
* tests/touch/no-create-missing.sh: Likewise.
* tests/touch/no-dereference.sh: Likewise.
* tests/misc/printenv.sh: Tweak to avoid syntax check trigger.
* tests/misc/help-version.sh: Likewise.
* tests/misc/yes.sh: Likewise.
* tests/misc/printf-quote.sh: Use previously unused $prog.
* configure.ac (EXTRA_MANS): Add $gl_no_install_prog to the list
so that check-x-vs-1 syntax check is satisfied.
|
|
It's better to be consistent even though spacing is insignificant:
http://www.in-ulm.de/~mascheck/various/shebang/#blankrequired
|
|
A side effect of this cleanup is we no longer
depend on our own kill command being built.
* init.cfg (require_trap_signame_): A new function to verify
that the shell supports specifying traps by signal name.
(require_kill_group_): A new function to ensure the shell
supports sending a signal to a group.
* tests/du/move-dir-while-traversing.sh: Ensure trap supports
signal names.
* tests/misc/stty-invalid.sh: Likewise.
* tests/misc/stty-pairs.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
* tests/misc/stty.sh: Likewise.
* tests/misc/sort-compress.sh: Likewise. Also simplify trap call.
* tests/install/trap.sh: Likewise.
* tests/misc/timeout.sh: Likewise.
* tests/dd/stats.sh: Likewise. Also use default kill command.
* tests/misc/timeout-group.sh: Likewise.
|
|
* src/paste.c (main): Setting the quoting style to "escape"
went against the intent of the comment about presenting
doubled backslashes to the user. Instead use "c-maybe"
which is the only mode which avoids doubled backslashes,
and provides protection against arbitrary control characters.
* tests/misc/paste.pl: Adjust accordingly.
|
|
* src/printf.c (usage): Mention the new format.
(print_formatted): Handle the quoting by calling
out to the quotearg module with "shell-escape" mode.
* doc/coreutils.texi (printf invocation): Document %q.
* tests/misc/printf-quote.sh: New test.
* tests/local.mk: Reference new test.
* NEWS: Mention the new feature.
|
|
This is mainly noticeable when the multi-byte code
within ls.c is triggered by multi-byte quotes.
$ seq 200000 | xargs touch
$ time ls-old -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.483s
$ time ls-new -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.430s
* src/ls.c (quote_name): Avoid rescanning the output looking for
unprintable chars when we know the quoting mode already escapes them.
* tests/misc/ls-misc.pl: Add tests for all quoting modes, with and
without -q, to verify this assumption.
|
|
* doc/coreutils.texi (ls invocation): Describe the new
'shell-escape' and 'shell-escape-always' quoting options.
* src/ls.c (usage): Mention the new quoting options.
* tests/misc/ls-misc.pl: Add a test for 'shell-escape'
|
|
Quote file names using the "shell-escape" or "shell-escape-always"
methods, which quote as appropriate for most shells,
and better support copy and paste of presented names.
The "always" variant is used when the file name is
embedded in an error message with surrounding spaces.
* cfg.mk (sc_error_shell_quotes): A new syntax check rule
to suggest quotef() where appropriate.
(sc_error_shell_always_quotes): Likewise for quoteaf().
* src/system.h (quotef): A new define to apply shell quoting
when needed. I.E. when shell character or ':' is present.
(quoteaf): Likewise, but always quote.
* src/*.c: Use quotef() and quoteaf() rather than quote()
where appropriate.
* tests/: Adjust accordingly.
|
|
* src/md5sum.c: Use the same file name escaping method used
when generating and checking checksums. I.E. ensure a single line
per file by starting the line with '\' for any file name containing '\n'
and replacing those with "\\n".
* NEWS: Move the item from changes in behavior to improvements,
since this is no longer a backwards incompat change when
processing stdout status messages.
* tests/misc/md5sum.pl: Remove quotes from expected status output.
* tests/misc/sha1sum.pl: Likewise.
|
|
Related to commit v8.24-61-g6796698 this provides
more consistent quoting, as quotearg_colon() defaults
to "literal" quoting by default, while quote()
provides appropriate quoting for diagnostics by default.
* gl/modules/randread: Depend on quote module rather than quotearg.
* gl/lib/randread.c: Used quote() not quotearg_colon().
* src/: Likewise.
* src/shred.c: Likewise. Also avoid unnecessary quoting
introducing overhead when wiping names.
* cfg.mk: Relax the matching expression to allow
"qname" variables as used in shred.c to satisfy the check.
* tests/: Adjust accordingly.
|
|
* src/date.c (main): Use %:z rather than %z with --iso-8601
as the standard states to consistently use extended format.
Note either format can be parsed by date.
* tests/misc/date.pl: Adjust accordingly.
* doc/coreutils.texi (du invocation): Clarify that "iso"
time styles are only similar to ISO-8601.
(ls invocation): Likewise.
(date invocation): Adjust the comment stating
that only --rfc-3339 output can be parsed by date(1).
* NEWS: Mention the change in behavior.
Reported at http://bugs.debian.org/799479
|
|
These strings are often file names or other user specified
parameters, which can give confusing errors in
the presence of unexpected characters for example.
* cfg.mk (sc_error_quotes): A new syntax check rule.
* src/*.c: Wrap error() string arguments with quote().
* tests/: Adjust accordingly.
* NEWS: Mention the improvement.
|
|
This is especially significant when using --check
with files generated on a windows system, where the \r
characters produce corrupted and confusing error messages.
This also ensures status messages are output on a single line.
* src/md5sum.c: Use quote() for printed file names.
* tests/misc/md5sum.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
Fixes http://bugs.gnu.org/21757
|
