| Age | Commit message (Collapse) | Author |
|---|
|
* tests/require-perl: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove it from this list.
* tests/init.cfg (require_perl_): New function.
* tests/misc/pwd-long: Use the new function, not the file.
* tests/ls/nameless-uid: Likewise.
* tests/misc/sum-sysv: Likewise.
|
|
* tests/misc/cut: Repeat each test using a multibyte locale,
if the configure-time test found such a locale.
Adjust the tests so that they also accept a slightly
different diagnostic that is specific to the MB-patched cut.
|
|
Without this change, we'd get use-of-uninit value warnings
and harder-to-diagnose failure down the road.
* tests/misc/pwd-long (normalize_to_cwd_relative): Diagnose stat
failure. This failed on AIX 6.1 and 7.1. Reported by Bruno Haible.
|
|
* tests/misc/printf-surprise: Also accept a strerror-style string
after the usual 'printf: write error:' diagnostic prefix.
Otherwise, this test would fail on HP-UX 11.
Reported by Bruno Haible.
|
|
* tests/misc/printf: Avoid false positive failure on MacOS X 10.5
due to a slightly differing diagnostic. Reported by Bruno Haible.
|
|
* tests/misc/printf: This results in more concise diagnostics.
|
|
Thanks to an improvement in gnulib's parse-datetime module,
commands like this now succeed (output manually indented):
$ ./date -u -d 2004-02-29T16:21:42.33+07:00 +%FT%T.%N%z
2004-02-29T09:21:42.330000000+0000
* tests/misc/date: Add a test to exercise the new-in-gnulib
parsing of ISO8601-with-"T" dates.
* NEWS (New features): Mention it.
* gnulib: Update, to pull in this parse-datetime improvement.
|
|
* src/join (g_names): New global (was main's "names").
(main): Update all uses of "names".
(line_no[2]): New globals.
(get_line): Increment after reading each line.
(check_order): Print the standard "file name:line_no: " prefix
as well as the offending line when reporting disorder.
Here is a sample old/new comparison:
-join: file 1 is not in sorted order
+join: in:4: is not sorted: contents-of-line-4
* tests/misc/join: Change the two affected tests to expect
the new diagnostic.
Add new tests for more coverage: mismatch in file 2,
two diagnostics, zero-length out-of-order line.
* NEWS (Improvements): Mention it.
Suggested by David Gast in http://debbugs.gnu.org/9236
|
|
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
|
|
* src/timeout.c (settimeout): A new function to convert
from a floating point duration and call alarm() or
timer_settime() if that's available.
(parse_duration): Return a double rather than unsigned int.
(usage): Mention floating point is supported.
(main): Pass the double to settimeout() rather than
calling alarm() directly with the parsed int.
(cleanup): Likewise.
* doc/coreutils.texi (timeout invocation): Say floating point timeouts
now supported, and mention the caveat with resolution.
* bootstrap.conf: Include the timer-time gnulib module.
* tests/misc/timeout-parameters: Add a test with nanoseconds.
* NEWS: Mention the improvement.
|
|
The following dropped the space from the first field
printf "1234567 \t1\n" | unexpand -a
Note POSIX says that spaces should not precede tabs.
Also a single trailing space should not be converted
if the next field starts with non blank characters.
So we enforce those rules too, with this change.
* src/unexpand.c (unexpand): Implement as per POSIX rules.
* tests/misc/unexpand: Add tests, and adjust existing
tests as per POSIX rules.
* NEWS: Mention the fix.
Reported by Hallvard B Furuseth
|
|
* tests/misc/timeout: Check that 'timeout' is not confused when
starting off with a child.
|
|
Treat fractions as a request to round up to the next representable
value, and treat out-of-range values as maximal ones. This is
consistent with how "sleep" works. And this way, "timeout
999999999999999999d FOO" and "timeout 4.5 foo" are more likely to
do what the user wants.
* src/timeout.c: Include c-strtod.h and xstrtod.h, not xstrtol.h.
(apply_time_suffix): Change it to the way sleep.c's time_suffix
does things. Maybe this function (identical in both programs,
other than its name) should be moved to a library?
(parse_duration): Return a maximal value on overflow. Return
unsigned int, not unsigned long. Allow fractions, which round
up to the next integer value.
* tests/misc/timeout-parameters: Adjust tests to match new behavior.
Add a very large number.
|
|
* src/timeout.c (cleanup): Send signals directly to the child
in case it has started its own process group (like a cascaded
timeout command would for example).
* test/misc/timeout-group: Add a test case.
* NEWS: Mention the fix.
|
|
Or more accurately, commands not started from the shell prompt,
that are interactive, or need to receive Ctrl-C etc. from the terminal.
* doc/coreutils.texi (timeout invocation): Document --foreground.
* src/timeout.c (main): Set the foreground flag and don't create
a separate group.
(cleanup): Only send a signal directly to the monitored command
when the foreground flag is set.
(usage): Describe --foreground.
* tests/misc/timeout-group: Add a new test.
* tests/Makefile.am: Reference new test.
NEWS: Mention the new option.
Reported by Shay Shimony
Analysis by Alan Curry
Fix suggested by Paul Eggert
|
|
* tests/misc/md5sum: Exercise new --strict option.
|
|
* tests/misc/sort-spinlock-abuse: Fix typo:
s/"very expensive" are/"very expensive" tests are/
|
|
Ensure that English diagnostics are emitted even when using
French sorting rules.
* tests/misc/sort-debug-keys: Unset LC_ALL and set LC_COLLATE,
LC_CTYPE and LC_NUMERIC to the fr_FR.UTF-8 locale, while setting
LC_MESSAGES=C. Reported by Stefano Lattarini.
|
|
* tests/misc/sort-spinlock-abuse: Classify as "very expensive" to
avoid unwarranted failure once and for all.
|
|
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
|
|
* tests/misc/sort-spinlock-abuse: This test would frequently fail
when run on a system under heavy load. Increase duration and limit.
|
|
* tests/split/suffix-length: Rename from tests/misc/split-a.
* tests/split/b-chunk: Rename from misc/split-bchunk.
* tests/split/fail: Rename from tests/misc/split-fail.
* tests/split/lines: Rename from tests/misc/split-l.
* tests/split/l-chunk: Rename from tests/misc/split-lchunk.
* tests/split/r-chunk: Rename from tests/misc/split-rchunk.
* tests/Makefile.am (TESTS): Reflect renaming.
|
|
* src/split.c (lines_bytes_chunk): Handle the edge case
where the file is truncated as we read.
* tests/misc/split-lchunk: Cleanup; no functional change.
|
|
* src/split.c (lines_chunk_split): Ensure that data is only
written to stdout when k specified. Also ensure that
extra files are not created when there is more data available
than reported in the file size.
* tests/misc/split-lchunk: Verify that split -n l/k/n doesn't
generate any files, and that -n l/n always generates n files.
* NEWS: Mention the fix.
|
|
* tests/misc/tac-continue: Fix typo in usually-skipped test:
s/mkfifo_or_skip/mkfifo_or_skip_/ (i.e., append "_").
This test is usually skipped, because I'm probably the only
one to set the FULL_PARTITION_TMPDIR envvar, and recently the
one I'd been using ceased to exist, so this test was skipped
even for me. Good argument for making this a root-only test
and creating a full partition just for this test case.
|
|
* src/printf.c (STRTOX): Don't access memory after a
string containing a single quote character.
* tests/misc/printf: Add tests for various combinations
of single quote characters combined with a numeric format.
* THANKS.in: Add bug reporter.
* NEWS: Mention the fix.
Reported-by: Paul Marinescu <paul.marinescu@imperial.ac.uk>
|
|
* tests/cp/existing-perm-race: s/mkfifo/mkfifo_or_skip_/
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/special-f: Likewise.
* tests/dd/reblock: Likewise.
* tests/ls/file-type: Likewise.
* tests/misc/cat-buf: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/printf-surprise: Likewise.
* tests/misc/selinux: Likewise.
* tests/misc/sort-spinlock-abuse: Likewise.
* tests/misc/stdbuf: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/init.cfg: Improve the error message when skipping.
|
|
* gl/lib/randperm.c (randperm_new): When the number of items
to return H, is much smaller than the total number of items N,
use a hash to represent the sparse permutations of the set N.
This is currently enabled for N > 128K and N/H > 32.
* tests/misc/shuf: Ensure shuf can quickly return 2 numbers
from a large range.
* gl/modules/randperm: Depend on hash.
* NEWS: Mention the change.
|
|
skip_test_ emits its diagnostic both to FD 9 (tty), and to
FD 2 (usually the log file), whereas init.sh's skip_ emits
only to FD 9. Without that, the log is slightly less useful.
* tests/cp/fiemap-2: Use skip_test_, not skip_.
* tests/cp/fiemap-perf: Likewise.
* tests/du/bigtime: Likewise.
* tests/du/files0-from-dir: Likewise.
* tests/du/move-dir-while-traversing: Likewise.
* tests/init.sh: Likewise.
* tests/misc/sort-stale-thread-mem: Likewise.
* tests/misc/stat-nanoseconds: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/split/filter: Likewise.
Prompted by a report from Pádraig Brady.
|
|
* src/sort.c (key_warn): `sort -k2,1n --debug` would output
warnings about being both "zero width" and "spanning multiple fields".
Suppress the latter one.
* tests/misc/sort-debug-warn: Add a couple of test cases.
|
|
* tests/Makefile.am (TESTS): Remove misc/pwd-unreadable-parent.
This test was misleading and useless (was always skipped).
Inspired by a report from Bruno Haible: http://debbugs.gnu.org/8570
* tests/misc/pwd-unreadable-parent: Remove file.
|
|
* tests/CuSkip.pm (skip): New file/module/function, to help
the perl test scripts "skip" a test consistently, emitting
a diagnostic both into the log file and into the outermost
stderr stream that is more likely to be seen by a human.
* tests/check.mk (TESTS_ENVIRONMENT): Add -MCuSkip.
* tests/misc/date-next-dow: Use CuSkip::skip in place of warn+exit-77.
* tests/misc/tty-eof: Likewise.
* tests/misc/uniq: Likewise.
* tests/rm/fail-eperm: Likewise.
* tests/misc/md5sum-newline: Likewise. Also, s/program_name/ME/.
* tests/misc/ls-misc (setuid_setup, main): Likewise.
* tests/misc/pwd-long: Likewise, and add -I"$abs_srcdir" -MCuSkip
to the $PERL invocation command.
Inspired by a request from Bruno Haible regarding misc/tty-eof:
http://debbugs.gnu.org/8570
|
|
* tests/ls/color-norm: s/to to/to/
* gl/lib/mbsalign.h (mbs_align_t): s/or or/or/
* src/extent-scan.c (extent_scan_read): s/the the/the/
* src/libstdbuf.c: s/the the/the/
* tests/misc/stdbuf: s/on on/on/
* ChangeLog-2005: s/for\n\tfor /for\n\t/
|
|
* tests/misc/help-version: Sleep only ~30s, not 10m.
The latter was a problem when somehow that sleep process would
hang around and thereby prevent (for up to 10m) a normal unmount
of the temporary partition in which I'd run the tests.
|
|
* tests/misc/test: Exercise the new operator.
* NEWS (Changes in behavior): Mention it.
|
|
* src/cut.c (set_fields): When computing the maximum range endpoint,
take into consideration the start of any unbounded range, like "999-".
* NEWS (Bug fixes): Mention it.
* tests/misc/cut (big-unbounded-b,c,f): Add tests.
Reported by Paul Marinescu in http://debbugs.gnu.org/7993
The bug was introduced on 2004-12-04 via commit 7380cf79.
|
|
This case was overlooked in commit bdde34f9, 2010-08-05,
"sort: tune and refactor --debug code, and fix minor underlining bug"
* src/sort.c (debug_key): Don't adjust the key end when
it's before the key start.
* tests/misc/sort-debug-keys: Add a test case.
|
|
This allows one to use join as a field extractor like:
join -a1 -o 1.3,1.1 - /dev/null
* src/join.c (join): Don't flag unpairable lines when
one of the files is empty.
* tests/misc/join: Add a new test for empty input, and adjust
a previous test that was only checking against empty input.
* doc/coreutils.texi (join invocation): Document the change.
* NEWS: Likewise.
|
|
* src/join.c: Skip the header even if one of the files is empty.
* tests/misc/join: Add a test case.
* NEWS: Mention the fix
|
|
Lines with a different number of fields than the first line,
will be truncated or padded.
* src/join.c (prfields): A new function refactored from prjoin(),
to output all but the join field.
(prjoin): Don't swap line1 and line2 when line1 is blank
so that the padding is applied to the right place.
(main): Handle the -o 'auto' option.
* tests/misc/join: Add 6 new cases to test the auto format.
* NEWS: Mention the change in behavior.
Suggestion from Assaf Gordon
|
|
* tests/misc/uniq-perf: New file.
* tests/Makefile.am (TESTS): Add it.
|
|
Run "make update-copyright".
|
|
* src/split.c (set_suffix_length): Only auto-calculate
the suffix length when the number of files is specified.
* tests/misc/split-a: Add a case to trigger the bug,
and exercise the suffix length auto-calculation.
* NEWS: Mention the fix.
Reported by Dmitry V. Levin and Sergey Vlasov at
https://bugzilla.altlinux.org/show_bug.cgi?id=24841
|
|
* cfg.mk (LINE_LEN_MAX, FILTER_LONG_LINES): New macros.
(sc_long_lines): New rule.
* HACKING: Use shorter URLs to the same material.
* doc/Makefile.am, doc/coreutils.texi, m4/boottime.m4:
* man/help2man, man/stdbuf.x, src/Makefile.am, src/cat.c, src/copy.c:
* src/cp.c, src/dd.c, src/df.c, src/du.c, src/groups.c, src/install.c:
* src/ls.c, src/md5sum.c, src/mv.c, src/od.c, src/pinky.c, src/ptx.c:
* src/readlink.c, src/remove.c, src/rmdir.c, src/setuidgid.c:
* src/sort.c, src/tail.c, src/touch.c, tests/Coreutils.pm:
* tests/cp/existing-perm-race, tests/cp/perm, tests/cp/preserve-gid:
* tests/du/2g, tests/du/long-from-unreadable, tests/init.sh:
* tests/install/basic-1, tests/ls/nameless-uid:
* tests/ls/readdir-mountpoint-inode, tests/misc/chroot-credentials:
* tests/misc/cut, tests/misc/date, tests/misc/join, tests/misc/md5sum:
* tests/misc/sha1sum, tests/misc/sha224sum, tests/misc/sort:
* tests/misc/sort-continue, tests/misc/sort-files0-from:
* tests/misc/sort-rand, tests/misc/stdbuf, tests/misc/tr:
* tests/misc/uniq, tests/mv/atomic, tests/mv/part-fail:
* tests/mv/part-symlink, tests/mv/sticky-to-xpart, tests/pr/pr-tests:
* tests/rm/fail-2eperm, tests/rm/interactive-always:
Reformat to fit within 80 columns.
* doc/Makefile.am (BAD_POSIX_PERL): New macro.
* doc/coreutils.texi: Reword slightly, to make menus and
index lines shorter.
* src/md5sum.c: Redo --help output so that it fits within 79
columns, since that's a bit more portable and all the other --help
strings fit in 79 columns.
|
|
* src/sort.c (main): If --parallel isn't specified,
restrict the number of threads to 8 by default.
If the --parallel option is specified, then
allow any number of threads to be set, independent
of the number of processors on the system.
* doc/coreutils.texi (sort invocation): Document the changes
to determining the number of threads to use.
Mention the memory overhead when using multiple threads.
* tests/misc/sort-spinlock-abuse: Allow single core
systems that support pthreads.
* tests/misc/sort-stale-thread-mem: Likewise.
* tests/misc/sort-unique-segv: Likewise.
* NEWS: Mention the change in behaviour.
|
|
* NEWS: Document this.
* src/sort.c (UNCOMPRESSED, UNREAPED, REAPED): New constants.
(struct tempnode): New member 'state', to hold these constants.
The pid member is now undefined if state == UNCOMPRESSED.
(struct sortfile): Replace member 'pid' with member 'temp'.
(uintptr): Remove.
(proctab_hasher, proctab_comparator, register_proc, delete_proc):
Proctab entries are now struct tempnode *, not pid_t, to handle
the case where multiple tempnode objects correspond to the same
pid. This avoids a race condition that can cause a hang.
(register_proc): Arg is now struct tempnode *, not pid_t. All
callers changed.
(delete_proc): Set tempnode state to REAPED.
(create_temp_file): No need to set pid member here; it's now
done when the pid is known.
(maybe_create_temp, create_temp): Remove PPID arg. Return struct
tempnode *, not char *. All callers changed.
(maybe_create_temp): Set node state to UNCOMPRESSED or UNREAPED.
No need to set node->pid to 0.
(open_temp): Replace NAME and PID args with a single TEMP arg.
All callers changed. Wait only for unreaped children.
(zaptemp): Wait for decompressor to finish before removing its
temporary-file input. This avoids .nfsXXXX hassles with NFS
and fixes a race (leading to a hang) regardless of NFS.
(open_input_files): Adjust to new way of dealing with temp files
and their subprocesses.
* tests/Makefile.am (TESTS): Add misc/sort-compress-hang.
* tests/misc/sort-compress-hang: New file.
|
|
* NEWS: Document this.
* src/sort.c (avoid_trashing_input): The previous fix to this
function didn't fix all the problems with this code. Replace it
with something simpler: just copy the input file. This doesn't
change the number of files, so return void instead of the updated
file count. Caller changed.
* tests/misc/sort-merge-fdlimit: Test for the bug.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Default TMPDIR to /tmp,
rather than to the working directory; this is more common in
practice, which makes the tests more real-worldish; and it is
often faster. Also, it avoids some problems with NFS cleanups.
* tests/misc/sort-compress: Remove unnecessary code setting TMPDIR.
* tests/misc/sort-compress-proc: Likewise. Do the final sleep
only if TMPDIR is relative, which should be rarely given the
change to TESTS_ENVIRONMENT.
|
|
* src/sort.c (uintptr): New type.
(enum procstate, struct procnode, update_proc): Remove.
(proctab_hasher, proctab_comparator, register_proc, wait_proc):
(reap_some): The proctab is now simply a hash of process-IDs
rather than of pointers to objects with reference counts and
states; this is smaller and faster and easier to understand.
(nprocs): Now pid_t, not size_t, since one cannot have more than
PID_MAX children.
(reap): If the argument is -1, wait; if 0 (a new value), do not.
Delete pid from proctab as needed. Ignore children that are not
in proctab, as they are from the program that exec'ed us and are
irrelevant to our success or failure.
(delete_proc, reap_all): New functions.
(open_temp): Register the child.
(sort): Clean up all children afterwards; without this patch,
'sort' sometimes missed failures in children due to race conditions.
* tests/Makefile.am (TESTS): Add misc/sort-compress-proc.
* tests/misc/sort-compress-proc: New file, to test for the
bugs fixed above.
|
|
* tests/misc/sort-stale-thread-mem: Fix typo in comment.
|
