| Age | Commit message (Collapse) | Author |
|---|
|
I started with the patches from Red Hat.
The entries below tell how the code evolved.
* src/ls.c (print_long_format, print_file_name_and_frills): When
there is no security context (due to getfilecon/lgetfilecon failing
with e.g. ENOTSUP), print it as "?", not "".
* src/ls.c (print_file_name_and_frills): Make -Z work without -l.
(length_of_file_name_and_frills): Likewise.
* src/ls.c: Remove the --lcontext and --scontext options.
Change the way -Z, --context work so that it no longer implies -l.
Thus, -Z -l will work like -lcontext and -Z without -l will work
like --scontext.
Adjust tests to reflect new 'ls -l' syntax -- affects only
systems with SELinux when operating on a file with no ACL.
These tests assumed that everything before the first space on
each line is the 10-byte mode string. But there may also be a "+"
in the 11th column, just before the space. However, note that this
is not new. The same thing would have happened even without the
change below, when listing a file with an ACL.
* tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm:
* tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod:
* tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm:
Don't make compilation depend on USE_ACL. An SELinux security
context counts as an "alternate access control method", so ls
must output a "+" for each file with a security context.
* src/ls.c [struct fileinfo] (have_acl): Declare unconditionally.
(FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly.
(gobble_file): Record whether a file has a security context, and
update the condition used to determine whether to print the "+".
(gobble_file): Call getfilecon/lgetfilecon also when
format == long_format, so that we get the "+".
* src/ls.c (gobble_file): Add a comment explaining why (with a
security context option) ls doesn't exit nonzero due to e.g.,
getfilecon failing with errno == ENOTSUP.
* src/ls.c (gobble_file): Ignore failure of getfilecon if it's due
to ENOTSUP.
* src/ls.c (gobble_file): Factor out three small blocks using
getfilecon and lgetfilecon.
Don't ignore return value from getfilecon and lgetfilecon.
* src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C
ternary operator).
(print_scontext_format): Likewise.
(print_scontext): Declare to be "bool", not int. Adjust uses.
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX).
* tests/misc/chcon: New file.
* tests/misc/chcon-fail: New file.
* tests/Makefile.am (check-root): Run new, root-only misc/chcon test.
* tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail.
* tests/misc/Makefile.am (TESTS): Add selinux.
* tests/misc/selinux: New file.
* tests/help-version: Skip chcon.
|
|
* NEWS: Describe how the fix affects pr.
* src/pr.c (init_parameters): The --merge (-m) option does
not imply --expand-tabs (-e), so don't set "untabify_input".
Reported by Wis Macomson.
* tests/misc/pr: New file. Test for the above fix.
* tests/misc/Makefile.am (TESTS): Add pr.
* THANKS: Update.
|
|
|
|
* tests/misc/pwd-unreadable-parent: Also skip when $REPLACE_GETCWD.
Reported by Bob Proulx.
|
|
* tests/misc/pwd-unreadable-parent: Rather than trying to decide
whether this test has a chance of succeeding, run it only when
$(host_os) is linux-gnu. It was failing on powerpc-apple-darwin8.8.0
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Add host_os=$(host_os).
|
|
|
|
|
|
* tests/misc/df-P: New file.
* tests/misc/Makefile.am (TESTS): Add df-P.
|
|
* tests/misc/pwd-unreadable-parent: Test $REPLACE_GETCWD = 0,
rather than for __GETCWD_PREFIX in config.h (the latter is no
longer defined, ever, due to gnulib changes).
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Define REPLACE_GETCWD.
|
|
* bootstrap.conf: Remove findprog.
* doc/coreutils.texi (sort invocation): The default is to not
compress. Don't treat "" specially.
* src/sort.c: Don't include findprog.h.
(create_temp): Compress only if the user specified --compress-program.
* tests/misc/sort-compress: Adjusts tests to match new behavior.
|
|
* src/shuf.c (main): Move declaration of input_lines to
function scope, and initialize to NULL, so we can free it.
[lint]: Free all malloc'd memory.
* tests/misc/shuf: Also test shuf's -e and -i options.
|
|
|
|
an environment variable.
* doc/coreutils.texi (sort invocation): Document this.
* src/sort.c (usage): Likewise.
(COMPRESS_PROGRAM_OPTION): New const.
(long_options, create_temp, main): Support new option.
* tests/misc/sort-compress: Test it.
|
|
* tests/misc/tty-eof: Occasionally (not reproducible), this
test would fail, with one or more programs exiting nonzero, e.g.,
tty-eof: sha224sum exited with status 1 (expected 0)
Now, maybe we'll get a clue, the next time that happens.
|
|
definitely using the replacement.
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Define CONFIG_HEADER.
|
|
* NEWS: Mention the bug fix.
* tests/misc/pwd-unreadable-parent: New file.
* tests/misc/Makefile.am (TESTS): Ad pwd-unreadable-parent.
|
|
* tests/misc/sort-compress: Use $abs_top_builddir, not $top_builddir.
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Likewise.
|
|
* tests/misc/sort-compress (SORT): Use $abs_builddir, now which.
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Export top_builddir.
|
|
* tests/misc/Makefile.am: Add the test.
* tests/misc/sort-compress: New file containing the tests.
|
|
wrong one of two or more bind-mounted sibling directories.
Suggestion from Mike Stone in <http://bugs.debian.org/380552>.
|
|
* Transform all Makefile.am files so that when running "make check",
CU_TEST_NAME is set to the name of the test. This is so that when I
run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check"
on the entire package it is more convenient to map a leak or error
found in a valgrind log file back to the offending test.
Use this command:
(echo tests/Makefile.am.in; find tests -name Makefile.am) \
|xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \
-e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
|
|
reports the entire program name ("../../src/test"), rather than
just the final component.
|
|
When decoding, always allow newlines in input, with almost no
performance impact.
* src/base64.c (do_decode): Initialize decode context.
Call base64_decode one more time, after all input is processed.
(usage): When decoding, newlines are always accepted.
* tests/misc/base64: Add a bunch of tests, for the above.
* gl/lib/base64.c: Include <string.h>.
(base64_decode_ctx_init, get_4, decode_4): New functions.
(base64_decode): Efficiently handle interspersed newlines.
(base64_decode_alloc): Update signature.
* gl/lib/base64.h (struct base64_decode_context): Define.
(base64_decode_ctx_init): Add prototype.
(base64_decode, base64_decode_alloc): Update prototypes.
[doc/ChangeLog]
* coreutils.texi (base64 invocation): When decoding, newlines
are always accepted.
|
|
* tests/chown/deref: Apply lang-default.
* tests/misc/split-a: Likewise.
* tests/mv/reply-no: Likewise.
Signed-off-by: Jim Meyering <jim@meyering.net>
|
|
|
|
* src/cut.c (cut_fields): Set file-scoped global to NULL after
freeing it. This avoids a double-free (and core dump on some systems)
for this usage: "echo 1>a; echo 2>b; cut -f2- a b". Reported by
James Hunt in <http://bugzilla.redhat.com/220312>.
* NEWS: List this bug fix.
* THANKS: Mention him.
* tests/misc/cut: New file.
* tests/misc/Makefile.am (TESTS): Add cut.
|
|
* tests/misc/date-sec: Don't emit any diagnostic about sleeping.
|
|
|
|
[patch by Paul Eggert]
* tests/chmod/c-option: When double-quoting part of a word, prefer
to double-quote the whole word. This is a bit easier to read (at
least for me), and in some cases it avoids a shell bug with Tru64
4.0 sh reported by Nelson H. F. Beebe. For example, instead of
"$abs_srcdir"/../setgid-check we now write
"$abs_srcdir/../setgid-check".
* tests/cp/cp-parents: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/trap: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/unread3: Likewise.
* tests/touch/no-create-missing: Likewise.
* lib/.cvsignore: Add uinttostr.c.
|
|
sh-trap-based
clean-up code isn't run.
|
|
pwd via a shell. Instead, ensure that the absolute name of the
pwd binary consists solely of reasonable characters.
|
|
tree paths. In the cleanup trap, make sure `cd' succeeds before
`chmod'ing and `rm'ing the temporary files.
* tests/chgrp/basic: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chgrp/no-x: Likewise.
* tests/chgrp/posix-H: Likewise.
* tests/chgrp/recurse: Likewise.
* tests/chmod/c-option: Likewise.
* tests/chmod/equal-x: Likewise.
* tests/chmod/equals: Likewise.
* tests/chmod/inaccessible: Likewise.
* tests/chmod/no-x: Likewise.
* tests/chmod/octal: Likewise.
* tests/chmod/setgid: Likewise.
* tests/chmod/umask-x: Likewise.
* tests/chmod/usage: Likewise.
* tests/chown/basic: Likewise.
* tests/chown/deref: Likewise.
* tests/chown/separator: Likewise.
* tests/cp/acl: Likewise.
* tests/cp/backup-1: Likewise.
* tests/cp/backup-dir: Likewise.
* tests/cp/backup-is-src: Likewise.
* tests/cp/cp-HL: Likewise.
* tests/cp/cp-deref: Likewise.
* tests/cp/cp-i: Likewise.
* tests/cp/cp-mv-backup: Likewise.
* tests/cp/cp-parents: Likewise.
* tests/cp/deref-slink: Likewise.
* tests/cp/dir-rm-dest: Likewise.
* tests/cp/dir-slash: Likewise.
* tests/cp/dir-vs-file: Likewise.
* tests/cp/fail-perm: Likewise.
* tests/cp/into-self: Likewise.
* tests/cp/link: Likewise.
* tests/cp/link-no-deref: Likewise.
* tests/cp/link-preserve: Likewise.
* tests/cp/no-deref-link1: Likewise.
* tests/cp/no-deref-link2: Likewise.
* tests/cp/no-deref-link3: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/cp/r-vs-symlink: Likewise.
* tests/cp/same-file: Likewise.
* tests/cp/slink-2-slink: Likewise.
* tests/cp/sparse: Likewise.
* tests/cp/special-bits: Likewise.
* tests/cp/src-base-dot: Likewise.
* tests/cp/symlink-slash: Likewise.
* tests/dd/not-rewound: Likewise.
* tests/dd/skip-seek2: Likewise.
* tests/dd/unblock-sync: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/basic: Likewise.
* tests/du/deref: Likewise.
* tests/du/deref-args: Likewise.
* tests/du/exclude: Likewise.
* tests/du/fd-leak: Likewise.
* tests/du/hard-link: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/no-deref: Likewise.
* tests/du/no-x: Likewise.
* tests/du/restore-wd: Likewise.
* tests/du/slash: Likewise.
* tests/du/slink: Likewise.
* tests/du/trailing-slash: Likewise.
* tests/du/two-args: Likewise.
* tests/fmt/long-line: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/create-leading: Likewise.
* tests/install/d-slashdot: Likewise.
* tests/install/trap: Likewise.
* tests/ln/misc: Likewise.
* tests/ln/target-1: Likewise.
* tests/ls/color-dtype-dir: Likewise.
* tests/ls/dangle: Likewise.
* tests/ls/dired: Likewise.
* tests/ls/file-type: Likewise.
* tests/ls/follow-slink: Likewise.
* tests/ls/infloop: Likewise.
* tests/ls/inode: Likewise.
* tests/ls/m-option: Likewise.
* tests/ls/no-arg: Likewise.
* tests/ls/recursive: Likewise.
* tests/ls/rt-1: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/ls/stat-failed: Likewise.
* tests/ls/stat-vs-dirent: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/misc/csplit: Likewise.
* tests/misc/date-sec: Likewise.
* tests/misc/false-status: Likewise.
* tests/misc/head-c: Likewise.
* tests/misc/head-pos: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/nl: Likewise.
* tests/misc/nohup: Likewise.
* tests/misc/pathchk1: Likewise.
* tests/misc/printf: Likewise.
* tests/misc/printf-hex: Likewise.
* tests/misc/pwd-long: Likewise.
* tests/misc/shuf: Likewise.
* tests/misc/sort-rand: Likewise.
* tests/misc/split-a: Likewise.
* tests/misc/split-fail: Likewise.
* tests/misc/split-l: Likewise.
* tests/misc/stat-fmt: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/wc-files0: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-2: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/p-slashdot: Likewise.
* tests/mkdir/p-thru-slink: Likewise.
* tests/mkdir/p-v: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mkdir/t-slash: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/atomic: Likewise.
* tests/mv/backup-dir: Likewise.
* tests/mv/childproof: Likewise.
* tests/mv/diag: Likewise.
* tests/mv/dir-file: Likewise.
* tests/mv/dir2dir: Likewise.
* tests/mv/dup-source: Likewise.
* tests/mv/hard-2: Likewise.
* tests/mv/hard-3: Likewise.
* tests/mv/hard-4: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/hard-verbose: Likewise.
* tests/mv/i-2: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/i-4: Likewise.
* tests/mv/i-5: Likewise.
* tests/mv/i-link-no: Likewise.
* tests/mv/into-self-4: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/no-target-dir: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/perm-1: Likewise.
* tests/mv/reply-no: Likewise.
* tests/mv/trailing-slash: Likewise.
* tests/mv/update: Likewise.
* tests/od/od-N: Likewise.
* tests/od/x8: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/readlink/rl-1: Likewise.
* tests/rm/cycle: Likewise.
* tests/rm/dangling-symlink: Likewise.
* tests/rm/deep-1: Likewise.
* tests/rm/dir-no-w: Likewise.
* tests/rm/dir-nonrecur: Likewise.
* tests/rm/dot-rel: Likewise.
* tests/rm/empty-inacc: Likewise.
* tests/rm/f-1: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/hash: Likewise.
* tests/rm/i-1: Likewise.
* tests/rm/i-no-r: Likewise.
* tests/rm/ignorable: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/ir-1: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/r-1: Likewise.
* tests/rm/r-2: Likewise.
* tests/rm/r-3: Likewise.
* tests/rm/r-4: Likewise.
* tests/rm/readdir-bug: Likewise.
* tests/rm/rm1: Likewise.
* tests/rm/rm2: Likewise.
* tests/rm/rm3: Likewise.
* tests/rm/rm4: Likewise.
* tests/rm/rm5: Likewise.
* tests/rm/sunos-1: Likewise.
* tests/rm/unread2: Likewise.
* tests/rm/unread3: Likewise.
* tests/rmdir/fail-perm: Likewise.
* tests/rmdir/t-slash: Likewise.
* tests/shred/exact: Likewise.
* tests/shred/remove: Likewise.
* tests/sum/sysv: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/assert: Likewise.
* tests/tail-2/assert-2: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/fflush: Likewise.
* tests/tail-2/infloop-1: Likewise.
* tests/tail-2/proc-ksyms: Likewise.
* tests/tail-2/start-middle: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/tee/basic: Likewise.
* tests/tee/dash: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
|
|
would cause an infloop for piped input of 8KB or more.
* NEWS: Mention the fix.
* tests/misc/shuf: Test for the above fix.
|
|
Remove from CVS, since ./bootstrap generates them automatically.
* .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log.
Remove more-specific entries. This catches files like configure.lineno.
* man/.cvsignore: Add Makefile.in.
* src/.cvsignore: Add Makefile.in.
Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c.
For .cvsignore file under the tests directory:
Add Makefile.in. Sort entries if necessary. Remove *.I, *.E,
*.X, *.O, *-tests, build-script, mk-script if they're never
created in this directory.
* build-aux/.cvsignore: New file.
* doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf,
coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it
is, but the makefile doesn't mention it). Remove coreutils.info
as it is subsumed by coreutils.info*.
* lib/.cvsignore: Add Makefile.in, getdate.tab.h.
Remove stat.c, sysexit.h.
* m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4,
inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4,
lock.m4, printf-posix.m4, same-inode.m4, size_max.m4,
uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of
these are put in automatically by ../bootstrap, but that's a
bootstrap bug that I plan to fix shortly.
* po/.cvsignore: More ../bootstrap-related fixes, plus remove old
cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg,
cat-id-dbl.c, messages.mo, stamp-cat-id.
|
|
|
|
|
|
|
|
no output. This change was in 6.0 but inadvertently unmentioned.
* doc/coreutils.texi (df invocation): df exits nonzero if it outpus
nothing.
* src/df.c (file_systems_processed): Renamed from n_valid_args, and now
a boolean.
(show_dev): Don't set it until we actually output something.
Print the header if this is the first output.
(main): Don't print a header, as that is now show_dev's job.
* tests/misc/Makefile.am (TESTS): Add df.
* tests/misc/df: New file.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add $VG_PATH_PREFIX as a prefix to $PATH
|
|
differences in frequently-changing /proc/cpuinfo.
Reported by Nelson Beebe.
|
|
contains a list of NUL-separated file names.
* src/wc.c: Include "readtokens.h".
(usage): Describe the new option, and adjust the `Usage':
with this option, no FILE may be specified on the command line.
(main): Handle the new option.
* tests/misc/wc-files0: New tests, for the above.
* tests/misc/wc-files0-from: Likewise.
* tests/misc/Makefile.am (TESTS): Add wc-files0.
|
|
|
