Age | Commit message (Collapse) | Author |
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Relax initial regexp to match more instances, but add a
filter to avoid some invalid conversions. Run this:
git grep -l "\`[^']*'" tests | xargs perl -pi -e '$q=q"'\''";' \
-e '$q="$q\\$q$q"; /(= ?\`|\`expr|\`echo|\Q$q\E)/ and next;' \
-e ' s/\`([^'\''"]*?'\'')/'\''$1/g'
The last disjunct in the above (...) filter is to exempt
any line that contains this string: '\''
With quoting like that, converting a ` to ' is likely to cause trouble,
so we'll handle those manually. Here are three examples where
the exemption is required:
*': `link-to-dir/'\'': hard link not allowed for directory'*) ;;
printf 'creating file `%s'\''\n' $f
'mv: inter-device move failed: `%s'\'' to `%s'\'';'\
|
|
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
|
|
Run "make update-copyright".
|
|
* tests/misc/timeout: Check that 'timeout' is not confused when
starting off with a child.
|
|
Run "make update-copyright".
|
|
Automatically make all of the changes like this:
-test "$VERBOSE" = yes && chgrp --version
+print_ver_ chgrp
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
|
|
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
|
|
Based on a report from Kim Hansen who wanted to
send a KILL signal to the monitored command
when `timeout` itself received a termination signal.
Rather than changing such a signal into a KILL,
we provide the more general mechanism of sending
the KILL after the specified grace period.
* src/timeout.c (cleanup): If a non zero kill delay
is specified, (re)set the alarm to that delay, after
which a KILL signal will be sent to the process group.
(usage): Mention the new option. Separate the description
of DURATION since it's now specified in 2 places.
Clarify that the duration is an integer.
(parse_duration): A new function refactored from main(),
since this logic is now called for two parameters.
(main): Parse the -k option.
* doc/coreutils.texi (timeout invocation): Describe the
new --kill-after option and use @display rather than
@table to show the duration suffixes. Clarify that
a duration of 0 disables the associated timeout.
* tests/misc/timeout-parameters: Check invalid --kill-after.
* tests/misc/timeout: Check a valid --kill-after works.
* NEWS: Mention the new feature.
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/277485
* tests/misc/timeout: Set all expected timeouts to 1s and all
unexpected timeouts to 10s. In this way, tests normally proceed
quickly but may delay up to 10s before reporting failures.
* tests/ls/infloop: Likewise.
* tests/tail-2/pid: Likewise.
* tests/tail-2/pipe-f: Likewise.
* tests/tail-2/wait: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
* tests/misc/timeout: Remove an erroneous comment
introduced through copy and paste.
|
|
* src/timeout.c (main): Reset the SIGCHLD handler to the default
as otherwise wait() could return -1 and set errno to ECHILD.
This condition was ignored until commit 0b1dcf33, on 31-08-2009,
"timeout: defensive handling of all wait() errors"
but subsequently timeout would run the command correctly
but then fail with an error message.
* tests/misc/timeout: In a subshell set the CHLD handler to
SIG_IGN to ensure the timeout command resets it to SIG_DFL.
* NEWS: Mention the fix.
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
* tests/misc/timeout-parameters: Validate exact exit status.
* tests/misc/stdbuf: Likewise.
* tests/misc/timeout: Likewise. Use require_built_.
* tests/misc/arch: Likewise.
|
|
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
Change exit values from ETIMEDOUT and ECANCELED,
the values of which are system dependent, to
124 and 125 respectively.
* src/timeout.c (EXIT_TIMEDOUT, EXIT_CANCELED): Define.
(usage, main): Adjust.
* coreutils.texi (timeout invocation): Update.
* tests/misc/timeout: Adjust.
|
|
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add timeout command to list.
* src/timeout.c: New file.
* src/kill.c (operand2sig): Move function to its own file,
now that timeout.c will also use it.
* src/operand2sig.c (operand2sig): New file, extracted from kill.c.
* src/operand2sig.h (operand2sig): Declare.
* src/Makefile.am (EXTRA_PROGRAMS): Add timeout.
* src/.gitignore: Add timeout binary to list to ignore.
* doc/coreutils.texi (timeout invocation): Add timeout info.
(Signal specifications): New section, also referenced by kill.
* man/Makefile.am (timeout.1): Add dependency.
* man/timeout.x: New file.
* po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate.
* tests/Makefile.am (TESTS): Add the two new tests.
* tests/misc/help-version: Add support for new timeout command.
* tests/misc/invalid-opt: Add support for new timeout command.
* tests/misc/timeout: New file: check basic timeout operation.
* tests/misc/timeout-parameters: New file: check invalid parameter
combinations.
|