| Age | Commit message (Collapse) | Author |
|---|
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Run "make update-copyright".
|
|
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
|
|
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
|
|
* tests/cp/existing-perm-race: s/mkfifo/mkfifo_or_skip_/
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/special-f: Likewise.
* tests/dd/reblock: Likewise.
* tests/ls/file-type: Likewise.
* tests/misc/cat-buf: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/printf-surprise: Likewise.
* tests/misc/selinux: Likewise.
* tests/misc/sort-spinlock-abuse: Likewise.
* tests/misc/stdbuf: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/init.cfg: Improve the error message when skipping.
|
|
Run "make update-copyright".
|
|
|
|
RHS='. "\${srcdir=.}/init.sh"; path_prepend_ ../src'
git grep -l test-lib.sh \
| xargs perl -pi -e 's,^\. \$srcdir/test-lib\.sh$,'"$RHS",
|
|
|
|
* tests/README: Remove long-obsolete file.
* tests/Makefile.am (EXTRA_DIST): Remove README.
* tests/misc/truncate-dir-fail: Add copyright comment.
* tests/misc/selinux: Likewise.
* tests/misc/chcon: Likewise.
* tests/misc/chcon-fail: Likewise.
* tests/sample-test: Use only 2010 in this list.
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
* src/ls.c (gobble_file) [long_format]: Map SELinux-only to '.',
any other nonempty combination of MAC and ACL to '+', and all else
to the usual ' '. Suggested by Michael Stone.
* tests/misc/selinux: Adapt: expect '.', not '+'.
* doc/coreutils.texi (What information is listed): Document this.
* NEWS (Changes in behavior): Mention it.
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
|
|
* tests/test-lib.sh (skip_if_mcstransd_is_running_): New function,
extracted from...
* tests/misc/chcon: ...here. Use function, not open-coded test.
* tests/misc/selinux: Use the function here, too.
Require root, not non-root.
* tests/Makefile.am (root_tests): Add misc/selinux.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ...
... rather than in each of 100+ test scripts.
* tests/chgrp/basic:
* tests/chgrp/no-x:
* tests/chmod/c-option:
* tests/chmod/no-x:
* tests/chmod/setgid:
* tests/chmod/thru-dangling:
* tests/chmod/umask-x:
* tests/chmod/usage:
* tests/chown/basic:
* tests/chown/deref:
* tests/chown/preserve-root:
* tests/cp/abuse:
* tests/cp/acl:
* tests/cp/backup-is-src:
* tests/cp/cp-a-selinux:
* tests/cp/cp-i:
* tests/cp/cp-mv-backup:
* tests/cp/deref-slink:
* tests/cp/fail-perm:
* tests/cp/into-self:
* tests/cp/link-preserve:
* tests/cp/preserve-gid:
* tests/cp/same-file:
* tests/cp/slink-2-slink:
* tests/cp/special-f:
* tests/cp/symlink-slash:
* tests/cp/thru-dangling:
* tests/du/basic:
* tests/du/hard-link:
* tests/du/inacc-dest:
* tests/du/long-sloop:
* tests/du/no-x:
* tests/install/basic-1:
* tests/ln/hard-backup:
* tests/ln/sf-1:
* tests/ls/file-type:
* tests/ls/infloop:
* tests/ls/nameless-uid:
* tests/ls/rt-1:
* tests/ls/stat-failed:
* tests/ls/symlink-slash:
* tests/ls/x-option:
* tests/misc/chcon:
* tests/misc/chcon-fail:
* tests/misc/csplit:
* tests/misc/df-P:
* tests/misc/groups-dash:
* tests/misc/groups-version:
* tests/misc/nohup:
* tests/misc/printf-surprise:
* tests/misc/runcon-no-reorder:
* tests/misc/selinux:
* tests/misc/split-a:
* tests/misc/split-fail:
* tests/misc/tac-continue:
* tests/misc/wc-files0:
* tests/mkdir/p-v:
* tests/mkdir/selinux:
* tests/mv/acl:
* tests/mv/backup-dir:
* tests/mv/backup-is-src:
* tests/mv/childproof:
* tests/mv/diag:
* tests/mv/dir2dir:
* tests/mv/dup-source:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/hard-verbose:
* tests/mv/i-2:
* tests/mv/i-3:
* tests/mv/i-4:
* tests/mv/i-5:
* tests/mv/i-link-no:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/mv-special-1:
* tests/mv/part-fail:
* tests/mv/part-symlink:
* tests/mv/partition-perm:
* tests/mv/perm-1:
* tests/mv/reply-no:
* tests/mv/sticky-to-xpart:
* tests/mv/update:
* tests/rm/cycle:
* tests/rm/dir-no-w:
* tests/rm/dir-nonrecur:
* tests/rm/fail-2eperm:
* tests/rm/fail-eacces:
* tests/rm/inaccessible:
* tests/rm/interactive-always:
* tests/rm/interactive-once:
* tests/rm/isatty:
* tests/rm/one-file-system:
* tests/rm/r-1:
* tests/rm/r-2:
* tests/rm/rm1:
* tests/rm/rm2:
* tests/rm/rm3:
* tests/rm/rm4:
* tests/rm/rm5:
* tests/rm/unread2:
* tests/rm/v-slash:
* tests/touch/fail-diag:
* tests/touch/not-owner:
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
* tests/mv/no-target-dir: Likewise.
* tests/other-fs-tmpdir: Likewise.
* tests/rm/empty-name: Likewise.
* tests/rm/fail-eperm: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/unreadable: Likewise.
* tests/setgid-check: Likewise.
* tests/sparse-file: Likewise.
* tests/strace: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/touch/dangling-symlink: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/not-owner: Likewise.
* tests/mv/i-3: Likewise.
* tests/umask-check: Likewise.
* tests/mv/acl: Likewise.
* tests/cp/acl: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chmod/setgid: Likewise.
* tests/cp/existing-perm-race: Likewise.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/slink: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/md5sum-newline: Likewise.
* tests/misc/nice: Likewise.
* tests/misc/od-x8: Likewise.
* tests/misc/pwd-unreadable-parent: Likewise.
* tests/misc/selinux: Likewise.
* tests/misc/stty-row-col: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/arch: Likewise, and source $srcdir/../test-lib.sh *before*
the use of skip_test_.
|
|
* tests/misc/selinux: Test for today's bug fix.
* NEWS: Mention the SELinux "ls -l" fix.
|
|
* tests/test-lib.sh (require_selinux_): New function.
* tests/misc/chcon: Use it.
* tests/misc/selinux: Use it here, too.
* tests/cp/cp-a-selinux: and here.
* tests/selinux: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove selinux.
Reported by Mike Frysinger and Bauke Jan Douma.
|
|
|
|
|
|
|
|
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux.
* tests/selinux: New file.
* tests/Makefile.am (EXTRA_DIST): Add selinux.
* tests/misc/selinux: Source the new script, rather than open coding it.
Change how "cp -a" and "cp --preserve=context" work with SELinux.
Now, cp -a attempts to preserve context, but failure to do so does
not change cp's exit status. However "cp --preserve=context" is
similar, but failure *does* cause cp to exit with nonzero status.
* src/copy.h (struct cp_options) [require_preserve_context]: New member.
* src/copy.c (copy_reg, copy_internal): Implement the above.
* src/mv.c (cp_option_init): Initialize the new member.
* src/install.c (cp_option_init): Likewise.
* src/cp.c (cp_option_init): Likewise.
(decode_preserve_arg): Set it or reset it.
FIXME: add an on-writable-NFS-only test
|
|
of the tested tools, not just ls.
|
|
I started with the patches from Red Hat.
The entries below tell how the code evolved.
* src/ls.c (print_long_format, print_file_name_and_frills): When
there is no security context (due to getfilecon/lgetfilecon failing
with e.g. ENOTSUP), print it as "?", not "".
* src/ls.c (print_file_name_and_frills): Make -Z work without -l.
(length_of_file_name_and_frills): Likewise.
* src/ls.c: Remove the --lcontext and --scontext options.
Change the way -Z, --context work so that it no longer implies -l.
Thus, -Z -l will work like -lcontext and -Z without -l will work
like --scontext.
Adjust tests to reflect new 'ls -l' syntax -- affects only
systems with SELinux when operating on a file with no ACL.
These tests assumed that everything before the first space on
each line is the 10-byte mode string. But there may also be a "+"
in the 11th column, just before the space. However, note that this
is not new. The same thing would have happened even without the
change below, when listing a file with an ACL.
* tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm:
* tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod:
* tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm:
Don't make compilation depend on USE_ACL. An SELinux security
context counts as an "alternate access control method", so ls
must output a "+" for each file with a security context.
* src/ls.c [struct fileinfo] (have_acl): Declare unconditionally.
(FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly.
(gobble_file): Record whether a file has a security context, and
update the condition used to determine whether to print the "+".
(gobble_file): Call getfilecon/lgetfilecon also when
format == long_format, so that we get the "+".
* src/ls.c (gobble_file): Add a comment explaining why (with a
security context option) ls doesn't exit nonzero due to e.g.,
getfilecon failing with errno == ENOTSUP.
* src/ls.c (gobble_file): Ignore failure of getfilecon if it's due
to ENOTSUP.
* src/ls.c (gobble_file): Factor out three small blocks using
getfilecon and lgetfilecon.
Don't ignore return value from getfilecon and lgetfilecon.
* src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C
ternary operator).
(print_scontext_format): Likewise.
(print_scontext): Declare to be "bool", not int. Adjust uses.
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX).
* tests/misc/chcon: New file.
* tests/misc/chcon-fail: New file.
* tests/Makefile.am (check-root): Run new, root-only misc/chcon test.
* tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail.
* tests/misc/Makefile.am (TESTS): Add selinux.
* tests/misc/selinux: New file.
* tests/help-version: Skip chcon.
|
