summaryrefslogtreecommitdiff
path: root/tests/misc/selinux
AgeCommit message (Collapse)Author
2012-08-30tests: add .sh and .pl suffixes to shell and perl tests, respectivelyStefano Lattarini
Not only this shrinks the size of the generated Makefile (from > 6300 lines to ~3000), but will allow further simplifications in future changes. * tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'. (PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to $(LOG_COMPILER) for the time being. (TESTS, root_tests): Adjust as described. * All tests: Rename as described.
2012-04-04tests: convert nearly all `...` expressions to $(...)Jim Meyering
Exempt init.sh because it runs before we're assured to have a shell that groks $(...). Exempt *.mk because "$" would have to be doubled, and besides, any `...` expression in a .mk file is almost certainly evaluated before init.sh is run. Finally, also exempt the perl-based tests, because perl's `...` cannot be converted to $(...). Do that by running this command: git grep -l '`.*`' tests \ | grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \ | xargs perl -pi -e 's/`(.*?)`/\$($1)/g' One minor fix-up change was required after that, due to how quoting differs: diff --git a/tests/chmod/equals b/tests/chmod/equals - expected_perms=$(eval 'echo \$expected_'$dest) + expected_perms=$(eval 'echo $expected_'$dest) Another was to make these required quoting adjustments: diff --git a/tests/misc/stty b/tests/misc/stty ... - rev=$(eval echo "\\\$REV_$opt") + rev=$(eval echo "\$REV_$opt") ... - rev1=$(eval echo "\\\$REV_$opt1") - rev2=$(eval echo "\\\$REV_$opt2") + rev1=$(eval echo "\$REV_$opt1") + rev2=$(eval echo "\$REV_$opt2") Also, transform two files that were needlessly excluded above: (both use perl, but are mostly bourne shell) perl -pi -e 's/`(.*?)`/\$($1)/g' \ tests/du/long-from-unreadable tests/init.cfg
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-08-08tests: complete the renaming framework_failure -> framework_failure_Stefano Lattarini
These changes were mostly mechanical, made by running the following command: git grep -lw framework_failure | grep -v ChangeLog \ | xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/' and then editing init.cfg and `tests/cp/cp-a-selinux' by hand. * tests/init.cfg (framework_failure): Remove, `framework_failure_' from init.sh should be used instead in the tests. Remove now-obsolete "FIXME" comment. (is_local_dir_, require_strace_, require_membership_in_two_groups_, require_sparse_support_, skip_if_mcstransd_is_running_, mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'. * Many test scripts: Likewise.
2011-06-17tests: remove skip_test_ function; use new skip_ insteadJim Meyering
* tests/init.cfg (skip_test_): Remove function. Use skip_ in place of skip_test_ everywhere else. * cfg.mk (sc_prohibit_skip_): Remove rule. * tests/**: Use skip_, not skip_test_, everywhere.
2011-05-14tests: refactor more tests to use mkfifo_or_skip_Pádraig Brady
* tests/cp/existing-perm-race: s/mkfifo/mkfifo_or_skip_/ * tests/cp/file-perm-race: Likewise. * tests/cp/parent-perm-race: Likewise. * tests/cp/special-f: Likewise. * tests/dd/reblock: Likewise. * tests/ls/file-type: Likewise. * tests/misc/cat-buf: Likewise. * tests/misc/mknod: Likewise. * tests/misc/printf-surprise: Likewise. * tests/misc/selinux: Likewise. * tests/misc/sort-spinlock-abuse: Likewise. * tests/misc/stdbuf: Likewise. * tests/misc/tac-continue: Likewise. * tests/init.cfg: Improve the error message when skipping.
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-11-17tests: convert tests/misc/selinux manuallyJim Meyering
2010-11-17tests: convert remaining uses of test-lib.sh to init.shJim Meyering
RHS='. "\${srcdir=.}/init.sh"; path_prepend_ ../src' git grep -l test-lib.sh \ | xargs perl -pi -e 's,^\. \$srcdir/test-lib\.sh$,'"$RHS",
2010-11-17tests: convert 'if test "$VERBOSE" = yes; then' to test ... &&Jim Meyering
2010-01-01maint: add a few copyrights; remove obsolete README fileJim Meyering
* tests/README: Remove long-obsolete file. * tests/Makefile.am (EXTRA_DIST): Remove README. * tests/misc/truncate-dir-fail: Add copyright comment. * tests/misc/selinux: Likewise. * tests/misc/chcon: Likewise. * tests/misc/chcon-fail: Likewise. * tests/sample-test: Use only 2010 in this list.
2009-10-30tests: factor 350 fail=0 initializations into test-lib.shJim Meyering
Run this command to remove the factored-out "fail=0" lines. perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$') * tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts. * tests/...: nearly all bourne shell scripts Suggested by Eric Blake.
2008-10-23ls: use '.' (not +) as SELinux-only alt. access flag in ls -l outputJim Meyering
* src/ls.c (gobble_file) [long_format]: Map SELinux-only to '.', any other nonempty combination of MAC and ACL to '+', and all else to the usual ' '. Suggested by Michael Stone. * tests/misc/selinux: Adapt: expect '.', not '+'. * doc/coreutils.texi (What information is listed): Document this. * NEWS (Changes in behavior): Mention it.
2008-09-10tests: use "Exit $fail", not (exit $fail); exit $failJim Meyering
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63 * tests/**: Convert all uses: This restrictive change converted the vast majority: git grep -l '^(exit \$fail); exit \$fail$' \ | xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/' And this did the rest, plus a few undesirable ones, so I manually backed out the changes to ChangeLog-* and build-aux/check.mk: git grep -l -E '\(exit [^)]+\); exit ' \ | xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-05-06tests: skip another test if mcstransd is runningJim Meyering
* tests/test-lib.sh (skip_if_mcstransd_is_running_): New function, extracted from... * tests/misc/chcon: ...here. Use function, not open-coded test. * tests/misc/selinux: Use the function here, too. Require root, not non-root. * tests/Makefile.am (root_tests): Add misc/selinux.
2008-05-06tests: hoist the sourcing of "lang-default"Jim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ... ... rather than in each of 100+ test scripts. * tests/chgrp/basic: * tests/chgrp/no-x: * tests/chmod/c-option: * tests/chmod/no-x: * tests/chmod/setgid: * tests/chmod/thru-dangling: * tests/chmod/umask-x: * tests/chmod/usage: * tests/chown/basic: * tests/chown/deref: * tests/chown/preserve-root: * tests/cp/abuse: * tests/cp/acl: * tests/cp/backup-is-src: * tests/cp/cp-a-selinux: * tests/cp/cp-i: * tests/cp/cp-mv-backup: * tests/cp/deref-slink: * tests/cp/fail-perm: * tests/cp/into-self: * tests/cp/link-preserve: * tests/cp/preserve-gid: * tests/cp/same-file: * tests/cp/slink-2-slink: * tests/cp/special-f: * tests/cp/symlink-slash: * tests/cp/thru-dangling: * tests/du/basic: * tests/du/hard-link: * tests/du/inacc-dest: * tests/du/long-sloop: * tests/du/no-x: * tests/install/basic-1: * tests/ln/hard-backup: * tests/ln/sf-1: * tests/ls/file-type: * tests/ls/infloop: * tests/ls/nameless-uid: * tests/ls/rt-1: * tests/ls/stat-failed: * tests/ls/symlink-slash: * tests/ls/x-option: * tests/misc/chcon: * tests/misc/chcon-fail: * tests/misc/csplit: * tests/misc/df-P: * tests/misc/groups-dash: * tests/misc/groups-version: * tests/misc/nohup: * tests/misc/printf-surprise: * tests/misc/runcon-no-reorder: * tests/misc/selinux: * tests/misc/split-a: * tests/misc/split-fail: * tests/misc/tac-continue: * tests/misc/wc-files0: * tests/mkdir/p-v: * tests/mkdir/selinux: * tests/mv/acl: * tests/mv/backup-dir: * tests/mv/backup-is-src: * tests/mv/childproof: * tests/mv/diag: * tests/mv/dir2dir: * tests/mv/dup-source: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/hard-verbose: * tests/mv/i-2: * tests/mv/i-3: * tests/mv/i-4: * tests/mv/i-5: * tests/mv/i-link-no: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/mv-special-1: * tests/mv/part-fail: * tests/mv/part-symlink: * tests/mv/partition-perm: * tests/mv/perm-1: * tests/mv/reply-no: * tests/mv/sticky-to-xpart: * tests/mv/update: * tests/rm/cycle: * tests/rm/dir-no-w: * tests/rm/dir-nonrecur: * tests/rm/fail-2eperm: * tests/rm/fail-eacces: * tests/rm/inaccessible: * tests/rm/interactive-always: * tests/rm/interactive-once: * tests/rm/isatty: * tests/rm/one-file-system: * tests/rm/r-1: * tests/rm/r-2: * tests/rm/rm1: * tests/rm/rm2: * tests/rm/rm3: * tests/rm/rm4: * tests/rm/rm5: * tests/rm/unread2: * tests/rm/v-slash: * tests/touch/fail-diag: * tests/touch/not-owner:
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-02-09tests: call skip_test_ in place of echo+exit 77Jim Meyering
* tests/mv/no-target-dir: Likewise. * tests/other-fs-tmpdir: Likewise. * tests/rm/empty-name: Likewise. * tests/rm/fail-eperm: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/isatty: Likewise. * tests/rm/unreadable: Likewise. * tests/setgid-check: Likewise. * tests/sparse-file: Likewise. * tests/strace: Likewise. * tests/tail-2/append-only: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/tail-n0f: Likewise. * tests/touch/dangling-symlink: Likewise. * tests/touch/fifo: Likewise. * tests/touch/not-owner: Likewise. * tests/mv/i-3: Likewise. * tests/umask-check: Likewise. * tests/mv/acl: Likewise. * tests/cp/acl: Likewise. * tests/chgrp/deref: Likewise. * tests/chmod/setgid: Likewise. * tests/cp/existing-perm-race: Likewise. * tests/cp/file-perm-race: Likewise. * tests/cp/parent-perm-race: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/long-from-unreadable: Likewise. * tests/du/long-sloop: Likewise. * tests/du/slink: Likewise. * tests/ls/nameless-uid: Likewise. * tests/ls/stat-dtype: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/md5sum-newline: Likewise. * tests/misc/nice: Likewise. * tests/misc/od-x8: Likewise. * tests/misc/pwd-unreadable-parent: Likewise. * tests/misc/selinux: Likewise. * tests/misc/stty-row-col: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/arch: Likewise, and source $srcdir/../test-lib.sh *before* the use of skip_test_.
2007-12-11Add a test to exercise today's bug fix.Jim Meyering
* tests/misc/selinux: Test for today's bug fix. * NEWS: Mention the SELinux "ls -l" fix.
2007-10-09Skip the chcon test on a system with no SELinux support.Jim Meyering
* tests/test-lib.sh (require_selinux_): New function. * tests/misc/chcon: Use it. * tests/misc/selinux: Use it here, too. * tests/cp/cp-a-selinux: and here. * tests/selinux: Remove file. * tests/Makefile.am (EXTRA_DIST): Remove selinux. Reported by Mike Frysinger and Bauke Jan Douma.
2007-10-03* tests/misc/selinux: Skip this test if the initial chcon fails.Jim Meyering
2007-09-15More misc, test-related changes. (some to allow running tests as root)Jim Meyering
2007-09-15Convert tests/misc/ to use test-lib.sh, too.Jim Meyering
2007-03-29* tests/cp/cp-a-selinux: New file. Test for the bug reported inJim Meyering
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux. * tests/selinux: New file. * tests/Makefile.am (EXTRA_DIST): Add selinux. * tests/misc/selinux: Source the new script, rather than open coding it. Change how "cp -a" and "cp --preserve=context" work with SELinux. Now, cp -a attempts to preserve context, but failure to do so does not change cp's exit status. However "cp --preserve=context" is similar, but failure *does* cause cp to exit with nonzero status. * src/copy.h (struct cp_options) [require_preserve_context]: New member. * src/copy.c (copy_reg, copy_internal): Implement the above. * src/mv.c (cp_option_init): Initialize the new member. * src/install.c (cp_option_init): Likewise. * src/cp.c (cp_option_init): Likewise. (decode_preserve_arg): Set it or reset it. FIXME: add an on-writable-NFS-only test
2007-03-29* tests/misc/selinux [VERBOSE]: Print version info for eachJim Meyering
of the tested tools, not just ls.
2007-03-29ls: Add support for SELinux and a slightly modified -Z option.Jim Meyering
I started with the patches from Red Hat. The entries below tell how the code evolved. * src/ls.c (print_long_format, print_file_name_and_frills): When there is no security context (due to getfilecon/lgetfilecon failing with e.g. ENOTSUP), print it as "?", not "". * src/ls.c (print_file_name_and_frills): Make -Z work without -l. (length_of_file_name_and_frills): Likewise. * src/ls.c: Remove the --lcontext and --scontext options. Change the way -Z, --context work so that it no longer implies -l. Thus, -Z -l will work like -lcontext and -Z without -l will work like --scontext. Adjust tests to reflect new 'ls -l' syntax -- affects only systems with SELinux when operating on a file with no ACL. These tests assumed that everything before the first space on each line is the 10-byte mode string. But there may also be a "+" in the 11th column, just before the space. However, note that this is not new. The same thing would have happened even without the change below, when listing a file with an ACL. * tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm: * tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod: * tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm: Don't make compilation depend on USE_ACL. An SELinux security context counts as an "alternate access control method", so ls must output a "+" for each file with a security context. * src/ls.c [struct fileinfo] (have_acl): Declare unconditionally. (FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly. (gobble_file): Record whether a file has a security context, and update the condition used to determine whether to print the "+". (gobble_file): Call getfilecon/lgetfilecon also when format == long_format, so that we get the "+". * src/ls.c (gobble_file): Add a comment explaining why (with a security context option) ls doesn't exit nonzero due to e.g., getfilecon failing with errno == ENOTSUP. * src/ls.c (gobble_file): Ignore failure of getfilecon if it's due to ENOTSUP. * src/ls.c (gobble_file): Factor out three small blocks using getfilecon and lgetfilecon. Don't ignore return value from getfilecon and lgetfilecon. * src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C ternary operator). (print_scontext_format): Likewise. (print_scontext): Declare to be "bool", not int. Adjust uses. * src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX). * tests/misc/chcon: New file. * tests/misc/chcon-fail: New file. * tests/Makefile.am (check-root): Run new, root-only misc/chcon test. * tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail. * tests/misc/Makefile.am (TESTS): Add selinux. * tests/misc/selinux: New file. * tests/help-version: Skip chcon.
generated by cgit v1.2.3-54-g00ecf (git 2.44.0) at 2024-08-03 01:32:24 +0000