summaryrefslogtreecommitdiff
path: root/tests/ln
AgeCommit message (Collapse)Author
2012-09-05build: don't use recursive make for tests/ subdirectoryStefano Lattarini
* Makefile.am (SUBDIRS): Remove 'tests'. (include): The '$(top_srcdir)/tests/local.mk' file. (check-root): Remove this convenience target, it's no longer needed now that the "real" check-root target once in 'tests/Makefile' will land in the top-level makefile. * configure.ac (AC_CONFIG_FILES): Remove 'tests/Makefile'. * tests/Makefile.am: Rename ... * tests/local.mk: ... like this, with a lot of adjustments. * tests/init.cfg: Move ... * init.cfg: ... here. This is necessary, for a limitation of the gnulib-provided 'tests/init.sh', which unconditionally look for 'init.cfg' in the $(srcdir) directory. * tests/*/*.sh: Adjust: expect init.sh to be in '$srcdir/tests', not in '$srcdir', and extend $PATH with './src', not with '../src'. * tests/Coreutils.pm: Adjust similarly. * tests/pr/pr-tests.pl ($pfx): Likewise.
2012-08-30tests: add .sh and .pl suffixes to shell and perl tests, respectivelyStefano Lattarini
Not only this shrinks the size of the generated Makefile (from > 6300 lines to ~3000), but will allow further simplifications in future changes. * tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'. (PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to $(LOG_COMPILER) for the time being. (TESTS, root_tests): Adjust as described. * All tests: Rename as described.
2012-04-04tests: convert nearly all `...` expressions to $(...)Jim Meyering
Exempt init.sh because it runs before we're assured to have a shell that groks $(...). Exempt *.mk because "$" would have to be doubled, and besides, any `...` expression in a .mk file is almost certainly evaluated before init.sh is run. Finally, also exempt the perl-based tests, because perl's `...` cannot be converted to $(...). Do that by running this command: git grep -l '`.*`' tests \ | grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \ | xargs perl -pi -e 's/`(.*?)`/\$($1)/g' One minor fix-up change was required after that, due to how quoting differs: diff --git a/tests/chmod/equals b/tests/chmod/equals - expected_perms=$(eval 'echo \$expected_'$dest) + expected_perms=$(eval 'echo $expected_'$dest) Another was to make these required quoting adjustments: diff --git a/tests/misc/stty b/tests/misc/stty ... - rev=$(eval echo "\\\$REV_$opt") + rev=$(eval echo "\$REV_$opt") ... - rev1=$(eval echo "\\\$REV_$opt1") - rev2=$(eval echo "\\\$REV_$opt2") + rev1=$(eval echo "\$REV_$opt1") + rev2=$(eval echo "\$REV_$opt2") Also, transform two files that were needlessly excluded above: (both use perl, but are mostly bourne shell) perl -pi -e 's/`(.*?)`/\$($1)/g' \ tests/du/long-from-unreadable tests/init.cfg
2012-03-22ln: add the --relative optionHarald Hoyer
With the "--relative --symbolic" options, ln computes the relative symbolic link for the user. So, ln works just as cp, but creates relative symbolic links instead of copying the file. I miss this feature since the beginning of using ln. $ tree ./ / `-- usr |-- bin `-- lib `-- foo `-- foo 4 directories, 1 file $ ln -s -v --relative usr/lib/foo/foo usr/bin/foo ‘usr/bin/foo’ -> ‘../lib/foo/foo’ $ tree ./ / `-- usr |-- bin | `-- foo -> ../lib/foo/foo `-- lib `-- foo `-- foo 4 directories, 2 files $ ln -s -v --relative usr/bin/foo usr/lib/foo/link-to-foo ‘usr/lib/foo/link-to-foo’ -> ‘foo’ $ tree ./ / `-- usr |-- bin | `-- foo -> ../lib/foo/foo `-- lib `-- foo |-- link-to-foo -> foo `-- foo 4 directories, 3 files * src/Makefile.am: Reference the relpath module. * src/ln.c (usage): Mention the new option. (do_link): Call the relative conversion if specified. (convert_abs_rel): Perform the relative conversion using the relpath module. * tests/ln/relative: Add a new test. * tests/Makefile.am: Reference the new test. * doc/coreutils.texi: Document the new feature. * NEWS: Mention the new feature.
2012-01-27maint: use single copyright year rangeJim Meyering
Run "make update-copyright".
2012-01-09maint: adjust quoting: emit '...', not `...' in diagnosticsJim Meyering
* src/csplit.c (parse_repeat_count, extract_regexp): As above. * src/date.c (main): Likewise. * src/ls.c (decode_switches): Likewise. * src/od.c (decode_one_format, main): Likewise. * src/pathchk.c (no_leading_hyphen): Likewise. * src/pr.c (main, getoptarg): Likewise. * src/rm.c (diagnose_leading_hyphen): Likewise. * src/sort.c (key_warnings, incompatible_options, main): Likewise. * src/stat.c (print_esc_char): Print '\x', not `\x' in diagnostic. * src/test.c (main): Likewise. * src/touch.c (main): Likewise. * src/tr.c (build_spec_list, validate, append_range): Likewise. * tests/misc/mktemp: This is an unusual case, since the affected string contains only the ` of an `...' string. So we change the long ` to a lone '. * tests/pr/pr-tests: Manual quote adapting fix-up. * tests/ln/hard-to-sym: Likewise. * tests/split/suffix-length: Likewise. * tests/mv/part-fail: Likewise. * tests/misc/chcon: Likewise. * tests/misc/stat-printf: Likewise.
2012-01-09tests: change `...' to '...' on lines not matching /[=\$]/Jim Meyering
Exempt lines with '$' or '=', since those are prone to improper conversion. Run this: git grep -l "\`[^']*'" tests \ |xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-11-22tests: use "compare exp out", not "compare out exp"Jim Meyering
Likewise, when an empty file is expected, use "compare /dev/null out", not "compare out /dev/null". I.e., specify the expected/desired contents via the first file name. Prompted by a suggestion from Bruno Haible in http://thread.gmane.org/gmane.comp.gnu.grep.bugs/4020/focus=29154 Run these commands: git grep -l -E 'compare [^ ]+ exp' \ |xargs perl -pi -e 's/(compare) (\S+) (exp\S*)/$1 $3 $2/' git grep -l -E 'compare [^ ]+ /dev/null' \ |xargs perl -pi -e 's/(compare) (\S+) (\/dev\/null)/$1 $3 $2/' * tests/chgrp/no-x: As above. * tests/chmod/no-x: Likewise. * tests/chmod/silent: Likewise. * tests/chmod/thru-dangling: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/preserve-root: Likewise. * tests/cp/abuse: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-a-selinux: Likewise. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/proc-zero-len: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/thru-dangling: Likewise. * tests/dd/reblock: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/bigtime: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/files0-from-dir: Likewise. * tests/du/hard-link: Likewise. * tests/du/inacc-dest: Likewise. * tests/du/inacc-dir: Likewise. * tests/du/long-sloop: Likewise. * tests/du/max-depth: Likewise. * tests/du/move-dir-while-traversing: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/one-file-system: Likewise. * tests/du/slash: Likewise. * tests/du/trailing-slash: Likewise. * tests/install/strip-program: Likewise. * tests/ln/hard-backup: Likewise. * tests/ls/block-size: Likewise. * tests/ls/color-clear-to-eol: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/color-norm: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-free-symlinks: Likewise. * tests/ls/x-option: Likewise. * tests/misc/arch: Likewise. * tests/misc/cat-buf: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/chcon: Likewise. * tests/misc/csplit: Likewise. * tests/misc/df-P: Likewise. * tests/misc/fmt-long-line: Likewise. * tests/misc/groups-dash: Likewise. * tests/misc/groups-version: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/nl: Likewise. * tests/misc/od-N: Likewise. * tests/misc/od-multiple-t: Likewise. * tests/misc/od-x8: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-option: Likewise. * tests/misc/readlink-fp-loop: Likewise. * tests/misc/runcon-no-reorder: Likewise. * tests/misc/seq-long-double: Likewise. * tests/misc/sort-NaN-infloop: Likewise. * tests/misc/sort-benchmark-random: Likewise. * tests/misc/sort-debug-keys: Likewise. * tests/misc/sort-float: Likewise. * tests/misc/sort-merge-fdlimit: Likewise. * tests/misc/sort-unique-segv: Likewise. * tests/misc/stat-hyphen: Likewise. * tests/misc/stat-slash: Likewise. * tests/misc/stdbuf: Likewise. * tests/misc/sum-sysv: Likewise. * tests/misc/tac-2-nonseekable: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/tr-case-class: Likewise. * tests/misc/truncate-fail-diag: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/selinux: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/force: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self: Likewise. * tests/mv/into-self-2: Likewise. * tests/mv/into-self-3: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/mv/trailing-slash: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/fail-eacces: Likewise. * tests/rm/i-never: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/isatty: Likewise. * tests/rm/one-file-system: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm5: Likewise. * tests/rm/unread2: Likewise. * tests/rm/v-slash: Likewise. * tests/sample-test: Likewise. * tests/split/b-chunk: Likewise. * tests/split/fail: Likewise. * tests/split/l-chunk: Likewise. * tests/split/lines: Likewise. * tests/split/r-chunk: Likewise. * tests/split/suffix-length: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/follow-name: Likewise. * tests/tail-2/follow-stdin: Likewise. * tests/tail-2/pipe-f: Likewise. * tests/tail-2/pipe-f2: Likewise. * tests/tail-2/start-middle: Likewise. * tests/touch/60-seconds: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/relative: Likewise.
2011-08-08tests: complete the renaming framework_failure -> framework_failure_Stefano Lattarini
These changes were mostly mechanical, made by running the following command: git grep -lw framework_failure | grep -v ChangeLog \ | xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/' and then editing init.cfg and `tests/cp/cp-a-selinux' by hand. * tests/init.cfg (framework_failure): Remove, `framework_failure_' from init.sh should be used instead in the tests. Remove now-obsolete "FIXME" comment. (is_local_dir_, require_strace_, require_membership_in_two_groups_, require_sparse_support_, skip_if_mcstransd_is_running_, mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'. * Many test scripts: Likewise.
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-11-17tests: substitute the single-program $VERBOSE/--version usesJim Meyering
Automatically make all of the changes like this: -test "$VERBOSE" = yes && chgrp --version +print_ver_ chgrp git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \ 's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
2010-11-17tests: convert remaining uses of test-lib.sh to init.shJim Meyering
RHS='. "\${srcdir=.}/init.sh"; path_prepend_ ../src' git grep -l test-lib.sh \ | xargs perl -pi -e 's,^\. \$srcdir/test-lib\.sh$,'"$RHS",
2010-11-17tests: convert 'if test "$VERBOSE" = yes; then' to test ... &&Jim Meyering
2010-11-17tests: convert first batch of tests from test-lib.sh to init.shJim Meyering
Initially, I did this, git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script' but that line would have been much longer than the maximum permitted by coreutils' commit hook, and wasn't readable besides, so here's a more readable version: lhs=$(printf '%s\\n' \ 'if test "$VERBOSE" = yes; then' \ ' set -x' \ ' touch --version' \ 'fi' \ '' \ '. $srcdir/test-lib.sh' \ | sed 's/\$/\\\$/g;s/touch/(\\w+)/') rhs=$(printf '%s\\n' \ '. "${srcdir=.}/init.sh"; path_prepend_ ../src' \ 'test "$VERBOSE" = yes && FIXME --version' \ | sed 's/\$/\\\$/g;s/FIXME/\$1/') git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
2010-01-01maint: update all FSF copyright year lists to include 2010Jim Meyering
Use this command: git ls-files | grep -v COPYING \ | xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \ build-aux/update-copyright
2009-10-30tests: factor 350 fail=0 initializations into test-lib.shJim Meyering
Run this command to remove the factored-out "fail=0" lines. perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$') * tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts. * tests/...: nearly all bourne shell scripts Suggested by Eric Blake.
2009-10-29tests: don't let a fail=1 env. setting induce unwarranted test failureJim Meyering
* cfg.mk (sc_fail_is_initialized): New rule. Fix the offenders: * tests/cp/acl: Set fail=0 * tests/cp/backup-is-src: Likewise. * tests/cp/file-perm-race: Likewise. * tests/cp/reflink-auto: Likewise. * tests/cp/same-file: Likewise. * tests/ln/backup-1: Likewise. * tests/misc/su-fail: Likewise. * tests/misc/truncate-owned-by-other: Likewise. * tests/mkdir/p-3: Likewise. * tests/mkdir/selinux: Likewise. * tests/mkdir/special-1: Likewise. * tests/mv/acl: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/diag: Likewise. * tests/mv/force: Likewise. * tests/mv/hard-link-1: Likewise. * tests/mv/into-self-3: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/touch/now-owned-by-other: Likewise.
2009-09-25ln: add -L/-P optionsEric Blake
* src/ln.c (STAT_LIKE_LINK): Delete. (logical): New flag. (long_options): Add -L, -P. (usage): Mention them. (main): Choose between them. (do_link): Perform correct action. * tests/ln/misc: Move hard-to-sym portion of test... * tests/ln/hard-to-sym: ...into new test, and add more. * tests/Makefile.am (TESTS): Run new test. * NEWS: Document this. * doc/coreutils.texi (link invocation, ln invocation): Likewise. * bootstrap.conf (gnulib_modules): Add linkat.
2009-09-10link,ln: use gnulib's link module to work around Solaris 10 deficiencyJim Meyering
Before this change, :>f; ln -T f no-such/ would succeed on Solaris 10. After it, ln fails, as it should: ln: accessing `z/': Not a directory The command, link f no-such/, had the same problem on that system. * bootstrap.conf (gnulib_modules): Add "link". * tests/ln/slash-decorated-nonexistent-dest: New test. * tests/Makefile.am (TESTS): Add it. * NEWS (Portability): Mention the improvement.
2009-06-23maint: update all Copyright year lists to include 2009Jim Meyering
2008-09-10tests: use "Exit $fail", not (exit $fail); exit $failJim Meyering
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63 * tests/**: Convert all uses: This restrictive change converted the vast majority: git grep -l '^(exit \$fail); exit \$fail$' \ | xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/' And this did the rest, plus a few undesirable ones, so I manually backed out the changes to ChangeLog-* and build-aux/check.mk: git grep -l -E '\(exit [^)]+\); exit ' \ | xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-05-06tests: hoist the sourcing of "lang-default"Jim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ... ... rather than in each of 100+ test scripts. * tests/chgrp/basic: * tests/chgrp/no-x: * tests/chmod/c-option: * tests/chmod/no-x: * tests/chmod/setgid: * tests/chmod/thru-dangling: * tests/chmod/umask-x: * tests/chmod/usage: * tests/chown/basic: * tests/chown/deref: * tests/chown/preserve-root: * tests/cp/abuse: * tests/cp/acl: * tests/cp/backup-is-src: * tests/cp/cp-a-selinux: * tests/cp/cp-i: * tests/cp/cp-mv-backup: * tests/cp/deref-slink: * tests/cp/fail-perm: * tests/cp/into-self: * tests/cp/link-preserve: * tests/cp/preserve-gid: * tests/cp/same-file: * tests/cp/slink-2-slink: * tests/cp/special-f: * tests/cp/symlink-slash: * tests/cp/thru-dangling: * tests/du/basic: * tests/du/hard-link: * tests/du/inacc-dest: * tests/du/long-sloop: * tests/du/no-x: * tests/install/basic-1: * tests/ln/hard-backup: * tests/ln/sf-1: * tests/ls/file-type: * tests/ls/infloop: * tests/ls/nameless-uid: * tests/ls/rt-1: * tests/ls/stat-failed: * tests/ls/symlink-slash: * tests/ls/x-option: * tests/misc/chcon: * tests/misc/chcon-fail: * tests/misc/csplit: * tests/misc/df-P: * tests/misc/groups-dash: * tests/misc/groups-version: * tests/misc/nohup: * tests/misc/printf-surprise: * tests/misc/runcon-no-reorder: * tests/misc/selinux: * tests/misc/split-a: * tests/misc/split-fail: * tests/misc/tac-continue: * tests/misc/wc-files0: * tests/mkdir/p-v: * tests/mkdir/selinux: * tests/mv/acl: * tests/mv/backup-dir: * tests/mv/backup-is-src: * tests/mv/childproof: * tests/mv/diag: * tests/mv/dir2dir: * tests/mv/dup-source: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/hard-verbose: * tests/mv/i-2: * tests/mv/i-3: * tests/mv/i-4: * tests/mv/i-5: * tests/mv/i-link-no: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/mv-special-1: * tests/mv/part-fail: * tests/mv/part-symlink: * tests/mv/partition-perm: * tests/mv/perm-1: * tests/mv/reply-no: * tests/mv/sticky-to-xpart: * tests/mv/update: * tests/rm/cycle: * tests/rm/dir-no-w: * tests/rm/dir-nonrecur: * tests/rm/fail-2eperm: * tests/rm/fail-eacces: * tests/rm/inaccessible: * tests/rm/interactive-always: * tests/rm/interactive-once: * tests/rm/isatty: * tests/rm/one-file-system: * tests/rm/r-1: * tests/rm/r-2: * tests/rm/rm1: * tests/rm/rm2: * tests/rm/rm3: * tests/rm/rm4: * tests/rm/rm5: * tests/rm/unread2: * tests/rm/v-slash: * tests/touch/fail-diag: * tests/touch/not-owner:
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-03-28Require that "(exit $fail); exit $fail" be last line of each test.Jim Meyering
* maint.mk (sc_require_test_exit_idiom): New rule to enforce policy. * tests/cp/acl: Adhere to the new policy. * tests/cp/preserve-gid: Likewise. * tests/dd/misc: * tests/install/create-leading: * tests/ln/sf-1: * tests/ls/symlink-slash: * tests/misc/help-version: * tests/misc/ls-time: * tests/misc/nice: * tests/misc/shred-remove: * tests/misc/stty: * tests/misc/stty-row-col: * tests/mkdir/p-1: * tests/mkdir/p-2: * tests/mkdir/p-3: * tests/mkdir/p-v: * tests/mkdir/special-1: * tests/mkdir/writable-under-readonly: * tests/mv/acl: * tests/mv/backup-is-src: * tests/mv/diag: * tests/mv/dir-file: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/i-2: * tests/mv/i-4: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/partition-perm: * tests/mv/to-symlink: * tests/rmdir/ignore: * tests/tail-2/assert: * tests/tail-2/assert-2: * tests/touch/dangling-symlink: * tests/touch/dir-1: * tests/touch/empty-file: * tests/touch/fifo: * tests/touch/no-rights: Likewise. Signed-off-by: Jim Meyering <meyering@redhat.com>
2007-10-14Pull all TESTS_ENVIRONMENT settings "up" into tests/check.mk.Jim Meyering
* tests/Makefile.am.in (TESTS_ENVIRONMENT): Remove definition. * tests/chgrp/Makefile.am: Likewise. * tests/chmod/Makefile.am: Likewise. * tests/chown/Makefile.am: Likewise. * tests/cp/Makefile.am: Likewise. * tests/dd/Makefile.am: Likewise. * tests/du/Makefile.am: Likewise. * tests/install/Makefile.am: Likewise. * tests/ln/Makefile.am: Likewise. * tests/ls/Makefile.am: Likewise. * tests/misc/Makefile.am: Likewise. * tests/mkdir/Makefile.am: Likewise. * tests/mv/Makefile.am: Likewise. * tests/readlink/Makefile.am: Likewise. * tests/rm/Makefile.am: Likewise. * tests/rmdir/Makefile.am: Likewise. * tests/tail-2/Makefile.am: Likewise. * tests/touch/Makefile.am: Likewise. * tests/check.mk (TESTS_ENVIRONMENT) [EXEEXT, EGREP, MAKE, PERL]: [CONFIG_HEADER, build_programs, host_os, host_triplet, PATH]: [REPLACE_GETCWD, CU_TEST_NAME]: Add definitions here. * tests/misc/pwd-long: Use $abs_top_builddir/src, not $BUILD_SRC_DIR. * tests/dd/skip-seek: Don't use $ENV{PROG}. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Likewise. * tests/mv/i-1: Likewise.
2007-09-15Enable some previously omitted test scripts. Add a test cross-check.Jim Meyering
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Reenable this test. Adjust for new rm. * tests/mkdir/Makefile.am: Add writable-under-readonly. * tests/mkdir/writable-under-readonly: Add some comments. This test is always skipped, for now. * tests/Makefile.am (ta): Hook up the new root-only script. * tests/tail-2/infloop-1: Make this test pass. * tests/tail-2/Makefile.am (TESTS): Add infloop-1. * tests/tail-2/fflush: Remove unused file. * tests/check.mk (vc_executable_is_in_TESTS): More portable. * tests/check.mk (check): Depend on the above. * build-aux/check.mk: Remove comment mentioning AUTHORS file.
2007-09-15Convert tests/ln/, too.Jim Meyering
2007-08-25Remove all .cvsignore files from version control.Jim Meyering
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
2007-07-10Change "version 2" to "version 3" in all copyright notices.Jim Meyering
2007-02-24Remove the "gnits" option; it prohibits my using "+" as a versionJim Meyering
string suffix, and all it does (beyond the default "gnu" option) is to _require_ the THANKS file. * configure.ac (AM_INIT_AUTOMAKE): Remove it. Remove all AUTOMAKE_OPTIONS settings in Makefile.am files. * tests/chgrp/Makefile.am, tests/chmod/Makefile.am: * tests/chown/Makefile.am, tests/cp/Makefile.am: * tests/du/Makefile.am, tests/expr/Makefile.am: * tests/factor/Makefile.am, tests/general/Makefile.am: * tests/install/Makefile.am, tests/ln/Makefile.am: * tests/ls/Makefile.am, tests/mkdir/Makefile.am: * tests/mv/Makefile.am, tests/readlink/Makefile.am: * tests/rm/Makefile.am, tests/rmdir/Makefile.am: * tests/seq/Makefile.am, tests/stty/Makefile.am: * tests/tee/Makefile.am, tests/touch/Makefile.am:
2007-01-13Put CU_TEST_NAME in the environment for each test run by "make check".Jim Meyering
* Transform all Makefile.am files so that when running "make check", CU_TEST_NAME is set to the name of the test. This is so that when I run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check" on the entire package it is more convenient to map a leak or error found in a valgrind log file back to the offending test. Use this command: (echo tests/Makefile.am.in; find tests -name Makefile.am) \ |xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \ -e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
2006-11-18"ln --backup f f" produces a misleading diagnostic:Jim Meyering
ln: creating hard link `f' => `f': No such file or directory * src/ln.c (do_link): Give a better diagnostic in this unusual case. (do_link): Rename local: s/lstat_ok/dest_lstat_ok/. * tests/ln/Makefile.am (TESTS): Add hard-backup. * tests/ln/hard-backup: New test for the above.
2006-10-22* tests/sample-test: Quote variables containing absolute buildJim Meyering
tree paths. In the cleanup trap, make sure `cd' succeeds before `chmod'ing and `rm'ing the temporary files. * tests/chgrp/basic: Likewise. * tests/chgrp/deref: Likewise. * tests/chgrp/no-x: Likewise. * tests/chgrp/posix-H: Likewise. * tests/chgrp/recurse: Likewise. * tests/chmod/c-option: Likewise. * tests/chmod/equal-x: Likewise. * tests/chmod/equals: Likewise. * tests/chmod/inaccessible: Likewise. * tests/chmod/no-x: Likewise. * tests/chmod/octal: Likewise. * tests/chmod/setgid: Likewise. * tests/chmod/umask-x: Likewise. * tests/chmod/usage: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/separator: Likewise. * tests/cp/acl: Likewise. * tests/cp/backup-1: Likewise. * tests/cp/backup-dir: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-HL: Likewise. * tests/cp/cp-deref: Likewise. * tests/cp/cp-i: Likewise. * tests/cp/cp-mv-backup: Likewise. * tests/cp/cp-parents: Likewise. * tests/cp/deref-slink: Likewise. * tests/cp/dir-rm-dest: Likewise. * tests/cp/dir-slash: Likewise. * tests/cp/dir-vs-file: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/link: Likewise. * tests/cp/link-no-deref: Likewise. * tests/cp/link-preserve: Likewise. * tests/cp/no-deref-link1: Likewise. * tests/cp/no-deref-link2: Likewise. * tests/cp/no-deref-link3: Likewise. * tests/cp/perm: Likewise. * tests/cp/preserve-2: Likewise. * tests/cp/r-vs-symlink: Likewise. * tests/cp/same-file: Likewise. * tests/cp/slink-2-slink: Likewise. * tests/cp/sparse: Likewise. * tests/cp/special-bits: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/symlink-slash: Likewise. * tests/dd/not-rewound: Likewise. * tests/dd/skip-seek2: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/deref: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/fd-leak: Likewise. * tests/du/hard-link: Likewise. * tests/du/inaccessible-cwd: Likewise. * tests/du/long-from-unreadable: Likewise. * tests/du/long-sloop: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/restore-wd: Likewise. * tests/du/slash: Likewise. * tests/du/slink: Likewise. * tests/du/trailing-slash: Likewise. * tests/du/two-args: Likewise. * tests/fmt/long-line: Likewise. * tests/install/basic-1: Likewise. * tests/install/create-leading: Likewise. * tests/install/d-slashdot: Likewise. * tests/install/trap: Likewise. * tests/ln/misc: Likewise. * tests/ln/target-1: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/inode: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-vs-dirent: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/close-stdout: Likewise. * tests/misc/csplit: Likewise. * tests/misc/date-sec: Likewise. * tests/misc/false-status: Likewise. * tests/misc/head-c: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/mknod: Likewise. * tests/misc/nl: Likewise. * tests/misc/nohup: Likewise. * tests/misc/pathchk1: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-long: Likewise. * tests/misc/shuf: Likewise. * tests/misc/sort-rand: Likewise. * tests/misc/split-a: Likewise. * tests/misc/split-fail: Likewise. * tests/misc/split-l: Likewise. * tests/misc/stat-fmt: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/concurrent-1: Likewise. * tests/mkdir/p-1: Likewise. * tests/mkdir/p-2: Likewise. * tests/mkdir/p-3: Likewise. * tests/mkdir/p-slashdot: Likewise. * tests/mkdir/p-thru-slink: Likewise. * tests/mkdir/p-v: Likewise. * tests/mkdir/parents: Likewise. * tests/mkdir/perm: Likewise. * tests/mkdir/t-slash: Likewise. * tests/mv/acl: Likewise. * tests/mv/atomic: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/childproof: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir-file: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/hard-2: Likewise. * tests/mv/hard-3: Likewise. * tests/mv/hard-4: Likewise. * tests/mv/hard-link-1: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-2: Likewise. * tests/mv/i-3: Likewise. * tests/mv/i-4: Likewise. * tests/mv/i-5: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self-4: Likewise. * tests/mv/leak-fd: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/no-target-dir: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/part-hardlink: Likewise. * tests/mv/part-rename: Likewise. * tests/mv/part-symlink: Likewise. * tests/mv/partition-perm: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/reply-no: Likewise. * tests/mv/trailing-slash: Likewise. * tests/mv/update: Likewise. * tests/od/od-N: Likewise. * tests/od/x8: Likewise. * tests/readlink/can-e: Likewise. * tests/readlink/can-f: Likewise. * tests/readlink/can-m: Likewise. * tests/readlink/rl-1: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dangling-symlink: Likewise. * tests/rm/deep-1: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/dot-rel: Likewise. * tests/rm/empty-inacc: Likewise. * tests/rm/f-1: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/hash: Likewise. * tests/rm/i-1: Likewise. * tests/rm/i-no-r: Likewise. * tests/rm/ignorable: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/ir-1: Likewise. * tests/rm/isatty: Likewise. * tests/rm/no-give-up: Likewise. * tests/rm/r-1: Likewise. * tests/rm/r-2: Likewise. * tests/rm/r-3: Likewise. * tests/rm/r-4: Likewise. * tests/rm/readdir-bug: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm4: Likewise. * tests/rm/rm5: Likewise. * tests/rm/sunos-1: Likewise. * tests/rm/unread2: Likewise. * tests/rm/unread3: Likewise. * tests/rmdir/fail-perm: Likewise. * tests/rmdir/t-slash: Likewise. * tests/shred/exact: Likewise. * tests/shred/remove: Likewise. * tests/sum/sysv: Likewise. * tests/tail-2/append-only: Likewise. * tests/tail-2/assert: Likewise. * tests/tail-2/assert-2: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/fflush: Likewise. * tests/tail-2/infloop-1: Likewise. * tests/tail-2/proc-ksyms: Likewise. * tests/tail-2/start-middle: Likewise. * tests/tail-2/tail-n0f: Likewise. * tests/tee/basic: Likewise. * tests/tee/dash: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/no-create-missing: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/obsolescent: Likewise. * tests/touch/read-only: Likewise. * tests/touch/relative: Likewise.
2006-08-22* aclocal.m4, config.hin, configure:Paul Eggert
Remove from CVS, since ./bootstrap generates them automatically. * .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log. Remove more-specific entries. This catches files like configure.lineno. * man/.cvsignore: Add Makefile.in. * src/.cvsignore: Add Makefile.in. Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c. For .cvsignore file under the tests directory: Add Makefile.in. Sort entries if necessary. Remove *.I, *.E, *.X, *.O, *-tests, build-script, mk-script if they're never created in this directory. * build-aux/.cvsignore: New file. * doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf, coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it is, but the makefile doesn't mention it). Remove coreutils.info as it is subsumed by coreutils.info*. * lib/.cvsignore: Add Makefile.in, getdate.tab.h. Remove stat.c, sysexit.h. * m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4, inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4, lock.m4, printf-posix.m4, same-inode.m4, size_max.m4, uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of these are put in automatically by ../bootstrap, but that's a bootstrap bug that I plan to fix shortly. * po/.cvsignore: More ../bootstrap-related fixes, plus remove old cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg, cat-id-dbl.c, messages.mo, stamp-cat-id.
2006-08-21Remove from CVS, since the bootstrap script generates them automatically.Paul Eggert
2006-08-19.Jim Meyering
2006-08-17Add/fix copyright notices and adjust to latest GNU FDL.Paul Eggert
2006-08-15.Jim Meyering
2006-08-09Regenerate.Paul Eggert
2006-08-09Regenerate.Paul Eggert
2006-07-17Regenerate.Paul Eggert
2006-07-09Regenerate.Paul Eggert
2006-07-03* tests/Makefile.am, tests/*/Makefile.am: (TESTS_ENVIRONMENT):Jim Meyering
Add $VG_PATH_PREFIX as a prefix to $PATH
2006-05-06.Jim Meyering
2006-03-26.Jim Meyering
2006-03-12.Jim Meyering
2006-02-20.Jim Meyering
generated by cgit v1.2.3-54-g00ecf (git 2.44.0) at 2024-07-12 07:43:52 +0000