summaryrefslogtreecommitdiff
path: root/tests/dd
AgeCommit message (Collapse)Author
2009-02-26tests: Remove system specific error stringsPádraig Brady
* tests/dd/skip-seek-past-file: Just check for the non system specific part of the error strings. This was causing an erroneous failure on NetBSD 1.6 at least.
2009-02-06tests: fix dd skip=greater_max_file_size test on Solaris 10Pádraig Brady
* tests/dd/skip-seek-past-file: I had previously commented that on some systems lseek(> max file size) may succeed, but left the possibility of failure in that case, so that I could determine specific systems to put in the comments for both failure modes.
2009-02-02update copyright dates from recent changesJim Meyering
* src/dd.c: Add 2009 to list of copyright years. * tests/dd/seek-skip-past-file: Likewise. * tests/dd/seek-skip-past-dev: Likewise. * m4/xattr.m4: Likewise. * src/copy.h: Likewise.
2009-01-28dd: Better handle user specified offsets that are too bigPádraig Brady
Following are the before and after operations for seekable files, for the various erroneous offsets handled by this patch: skip beyond end of file before: immediately exit(0); after : immediately printf("cannot skip to specified offset"); exit(0); skip > max file size before: read whole file and exit(0); after : immediately printf("cannot skip: Invalid argument"); exit(1); seek > max file size before: immediately printf("truncate error: EFBIG"); exit(1); after : immediately printf("truncate error: EFBIG"); exit(1); skip > OFF_T_MAX before: read whole device/file and exit(0); after : immediately printf("cannot skip:"); exit(1); seek > OFF_T_MAX before: immediately printf("truncate error: offset too large"); exit(1); after : immediately printf("truncate error: offset too large"); exit(1); skip > device size before: read whole device and exit(0); after : immediately printf("cannot skip: Invalid argument"); exit(1); seek > device size before: read whole device and printf("write error: ENOSPC"); exit(1); after : immediately printf("cannot seek: Invalid argument"); exit(1); * NEWS: Summarize this change in behavior. * src/dd.c (skip): Add error checking for large seek/skip offsets on seekable files, rather than deferring to using read() to advance offset. (dd_copy): Print a warning if skip past EOF, as per FIXME comment. * test/Makefile.am: Add 2 new tests. * tests/dd/seek-skip-past-file: Add tests for first 3 cases above. * tests/dd/seek-skip-past-dev: Add root only test for last case above.
2008-12-01tests: dd/reblock: Reduce chance of timing related failuresPádraig Brady
* tests/dd/reblock: Change the IPC mechanism to the dd process under test, from pipes to fifos. Also change the delay between data writes to 0.2s for both tests. This should increase the chance that the dd process will read the data chunks separately.
2008-11-30tests: dd/reblock: avoid occasional failureJim Meyering
* tests/dd/reblock: Sleep longer to avoid a race condition. Reported by Bob Proulx.
2008-11-22tests: dd: add a test for the required behaviorJim Meyering
* tests/dd/reblock: New file. Test for the required functionality. Based on an example and discussion from this thread: http://lists.gnu.org/archive/html/bug-coreutils/2008-11/msg00153.html * tests/Makefile.am (TESTS): Add dd/reblock.
2008-09-10tests: use "Exit $fail", not (exit $fail); exit $failJim Meyering
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63 * tests/**: Convert all uses: This restrictive change converted the vast majority: git grep -l '^(exit \$fail); exit \$fail$' \ | xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/' And this did the rest, plus a few undesirable ones, so I manually backed out the changes to ChangeLog-* and build-aux/check.mk: git grep -l -E '\(exit [^)]+\); exit ' \ | xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
2008-08-14set envvars via "env" to avoid spurious set -x output from bad shellsJim Meyering
* tests/dd/misc: Set LC_ALL=C via env. * tests/cp/thru-dangling: Set POSIXLY_CORRECT via env. This is necessary at least on AIX 5.3. Reported by Jeph Cowan and Ralf Wildenhues. Details here: http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/14235/focus=14257
2008-07-23dd: minor fullblock changesJim Meyering
* src/dd.c (O_FULLBLOCK): Define using an enum, not #define. Derive the value, rather than hard-coding to one that might conflict. (usage): Mention iflag=fullblock in --help output. (scanargs): Reset the O_FULLBLOCK bit, so that we don't try to set an undefined attribute via fcntl (fd, F_SETFL, ... * tests/dd/misc: Signal framework_failure when necessary. Use "compare actual expected", so any diffs look "right". * NEWS (dd): Alphabetize and reword. * coreutils.texi (dd invocation): Adjust wording.
2008-07-23dd: new option: iflag=fullblock to accumulate full input blocksKamil Dudka
* src/dd.c (iread_fullblock): New function for reading full blocks. (scanargs): Check for new parameter iflag=fullblock. (skip): Use iread_fnc pointer instead of iread function. (dd_copy): Use iread_fnc pointer instead of iread function. * tests/dd/misc: Add test for dd - read full blocks. * doc/coretuils.texi: Mention new parameter iflag=fullblock. * NEWS: Mentioned the change.
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-05-17tests: remove ugly /bin/sh wrapper around each perl-based test scriptJim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Save and restore TMPDIR around envvar-check, so that the few scripts that require $TMPDIR don't fail. This is also good to let a user's default TMPDIR setting be used e.g., in the search for an 'other-partition'. FIXME: this is pretty ugly. maybe undo it and find a better way. (TESTS_ENVIRONMENT): Invoke perl scripts with $(PERL), and use -T if the script requires that. Otherwise, use $(SHELL). * tests/misc/md5sum-newline: Create a file whose name contains a newline in Perl (resort to using "system", since open refuses). Fix old brokenness exposed by this change: * tests/du/files0-from: Correct test not to rely on stdin being attached to a non-tty. * tests/misc/sort (3g, 3h, 3i): Likewise: add explicit empty input file. Avoid warnings about using qw()-around-commas. * tests/rm/fail-eperm: Now that this test is run from a temporary subdirectory, adjust the full name of the "rm" program we're going to run. Change #!/bin/sh to #!/usr/bin/perl, and factor out the few lines of boilerplate code to invoke perl. Do not "require 5.00x"; a configure-time Perl test handles that * tests/dd/skip-seek: * tests/misc/base64: * tests/misc/basename: * tests/misc/cut: * tests/misc/date: * tests/misc/dircolors: * tests/misc/dirname: * tests/misc/expand: * tests/misc/expr: * tests/misc/factor: * tests/misc/fmt: * tests/misc/fold: * tests/misc/head: * tests/misc/head-elide-tail: * tests/misc/join: * tests/misc/ls-misc: * tests/misc/md5sum: * tests/misc/md5sum-newline: * tests/misc/mktemp: * tests/misc/od: * tests/misc/paste: * tests/misc/pr: * tests/misc/printf-cov: * tests/misc/seq: * tests/misc/sha1sum: * tests/misc/sha1sum-vec: * tests/misc/sha224sum: * tests/misc/sha256sum: * tests/misc/sha384sum: * tests/misc/sha512sum: * tests/misc/sort-merge: * tests/misc/stat-printf: * tests/misc/sum: * tests/misc/tac: * tests/misc/tail: * tests/misc/test: * tests/misc/test-diag: * tests/misc/tr: * tests/misc/tsort: * tests/misc/tty-eof: * tests/misc/unexpand: * tests/misc/uniq: * tests/misc/wc: * tests/misc/wc-files0-from: * tests/misc/xstrtol: * tests/mv/i-1: * tests/pr/pr-tests: * tests/rm/empty-name: * tests/rm/fail-eperm: * tests/rm/unreadable:
2008-05-06fix typo in comments: s/ouput/output/Jim Meyering
adjust spelling in that same comment: s/localisation/localization/
2008-04-21tests: adjust perl -I to use $top_srcdir/tests, not $srcdir/..Jim Meyering
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-03-31dd bug fix: accept e.g., if=/dev/stdin and of=/dev/stdoutPaul Eggert
* lib/fd-reopen.c: Work even if FILE is "/dev/stdin". Problem reported by Geoffrey Lee in <http://bugs.debian.org/290727>. * tests/dd/misc: Check for this bug.
2008-03-28Require that "(exit $fail); exit $fail" be last line of each test.Jim Meyering
* maint.mk (sc_require_test_exit_idiom): New rule to enforce policy. * tests/cp/acl: Adhere to the new policy. * tests/cp/preserve-gid: Likewise. * tests/dd/misc: * tests/install/create-leading: * tests/ln/sf-1: * tests/ls/symlink-slash: * tests/misc/help-version: * tests/misc/ls-time: * tests/misc/nice: * tests/misc/shred-remove: * tests/misc/stty: * tests/misc/stty-row-col: * tests/mkdir/p-1: * tests/mkdir/p-2: * tests/mkdir/p-3: * tests/mkdir/p-v: * tests/mkdir/special-1: * tests/mkdir/writable-under-readonly: * tests/mv/acl: * tests/mv/backup-is-src: * tests/mv/diag: * tests/mv/dir-file: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/i-2: * tests/mv/i-4: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/partition-perm: * tests/mv/to-symlink: * tests/rmdir/ignore: * tests/tail-2/assert: * tests/tail-2/assert-2: * tests/touch/dangling-symlink: * tests/touch/dir-1: * tests/touch/empty-file: * tests/touch/fifo: * tests/touch/no-rights: Likewise. Signed-off-by: Jim Meyering <meyering@redhat.com>
2008-02-28Make copyright comments consistent.Jim Meyering
* src/mktemp.c: Update copyright to use newer form. Make first copyright lines consistent. Some did not end in ", Inc.". Due to that missing ", Inc" at end of line, emacs' copyright-updating code missed some opportunities. This corrects most of those, and adds some mistakenly omitted years. * src/chown-core.c: Adjust. * src/chown-core.h: Likewise. * src/copy.c: Likewise. * src/copy.h: Likewise. * src/cp-hash.c: Likewise. * src/cp.c: Likewise. * src/group-list.h: Likewise. * src/mktemp.c: Likewise. * src/stat.c: Likewise. * tests/chmod/equal-x: Likewise. * tests/dd/skip-seek: Likewise. * tests/envvar-check: Likewise. * tests/mv/into-self-2: Likewise.
2008-02-09tests: factor out the perl-requiring code in many test scriptsJim Meyering
* tests/require-perl: New file. * tests/Makefile.am (EXTRA_DIST): Add require-perl. * tests/dd/skip-seek: Use it, and remove manual tests. * tests/du/files0-from: Likewise. * tests/ls/nameless-uid: Likewise. * tests/misc/base64: Likewise. * tests/misc/basename: Likewise. * tests/misc/cut: Likewise. * tests/misc/date: Likewise. * tests/misc/dircolors: Likewise. * tests/misc/dirname: Likewise. * tests/misc/expand: Likewise. * tests/misc/expr: Likewise. * tests/misc/factor: Likewise. * tests/misc/fmt: Likewise. * tests/misc/fold: Likewise. * tests/misc/head-elide-tail: Likewise. * tests/misc/ls-misc: Likewise. * tests/misc/md5sum: Likewise. * tests/misc/md5sum-newline: Likewise. * tests/misc/mktemp: Likewise. * tests/misc/od: Likewise. * tests/misc/paste-no-nl: Likewise. * tests/misc/pr: Likewise. * tests/misc/pwd-long: Likewise. * tests/misc/seq: Likewise. * tests/misc/sha1sum: Likewise. * tests/misc/sha1sum-vec: Likewise. * tests/misc/sha224sum: Likewise. * tests/misc/sha256sum: Likewise. * tests/misc/sha384sum: Likewise. * tests/misc/sha512sum: Likewise. * tests/misc/sort-merge: Likewise. * tests/misc/stat-printf: Likewise. * tests/misc/sum: Likewise. * tests/misc/sum-sysv: Likewise. * tests/misc/test-diag: Likewise. * tests/misc/tsort: Likewise. * tests/misc/tty-eof: Likewise. * tests/misc/unexpand: Likewise. * tests/misc/wc-files0-from: Likewise. * tests/misc/xstrtol: Likewise. * tests/mv/i-1: Likewise. * tests/rm/empty-name: Likewise. * tests/rm/fail-eperm: Likewise. * tests/rm/unreadable: Likewise. (EXTRA_DIST): *do* require require-perl as a stand-alone, 'source'able script.
2007-11-16Port to Solaris 8 perl, which does not support "use warnings;".Paul Eggert
* tests/dd/skip-seek: Skip test if "use warnings;" fails. * tests/du/files0-from: Likewise. * tests/misc/base64: Likewise. * tests/misc/basename: Likewise. * tests/misc/cut: Likewise. * tests/misc/date: Likewise. * tests/misc/dircolors: Likewise. * tests/misc/dirname: Likewise. * tests/misc/expand: Likewise. * tests/misc/expr: Likewise. * tests/misc/factor: Likewise. * tests/misc/fmt: Likewise. * tests/misc/fold: Likewise. * tests/misc/head-elide-tail: Likewise. * tests/misc/ls-misc: Likewise. * tests/misc/md5sum: Likewise. * tests/misc/md5sum-newline: Likewise. * tests/misc/mktemp: Likewise. * tests/misc/od: Likewise. * tests/misc/paste-no-nl: Likewise. * tests/misc/pr: Likewise. * tests/misc/seq: Likewise. * tests/misc/sha1sum: Likewise. * tests/misc/sha1sum-vec: Likewise. * tests/misc/sha224sum: Likewise. * tests/misc/sha256sum: Likewise. * tests/misc/sha384sum: Likewise. * tests/misc/sha512sum: Likewise. * tests/misc/sort-merge: Likewise. * tests/misc/stat-printf: Likewise. * tests/misc/sum: Likewise. * tests/misc/test-diag: Likewise. * tests/misc/tsort: Likewise. * tests/misc/unexpand: Likewise. * tests/misc/wc-files0-from: Likewise. * tests/misc/xstrtol: Likewise. * tests/mv/i-1: Likewise. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Likewise.
2007-10-14Pull all TESTS_ENVIRONMENT settings "up" into tests/check.mk.Jim Meyering
* tests/Makefile.am.in (TESTS_ENVIRONMENT): Remove definition. * tests/chgrp/Makefile.am: Likewise. * tests/chmod/Makefile.am: Likewise. * tests/chown/Makefile.am: Likewise. * tests/cp/Makefile.am: Likewise. * tests/dd/Makefile.am: Likewise. * tests/du/Makefile.am: Likewise. * tests/install/Makefile.am: Likewise. * tests/ln/Makefile.am: Likewise. * tests/ls/Makefile.am: Likewise. * tests/misc/Makefile.am: Likewise. * tests/mkdir/Makefile.am: Likewise. * tests/mv/Makefile.am: Likewise. * tests/readlink/Makefile.am: Likewise. * tests/rm/Makefile.am: Likewise. * tests/rmdir/Makefile.am: Likewise. * tests/tail-2/Makefile.am: Likewise. * tests/touch/Makefile.am: Likewise. * tests/check.mk (TESTS_ENVIRONMENT) [EXEEXT, EGREP, MAKE, PERL]: [CONFIG_HEADER, build_programs, host_os, host_triplet, PATH]: [REPLACE_GETCWD, CU_TEST_NAME]: Add definitions here. * tests/misc/pwd-long: Use $abs_top_builddir/src, not $BUILD_SRC_DIR. * tests/dd/skip-seek: Don't use $ENV{PROG}. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Likewise. * tests/mv/i-1: Likewise.
2007-09-15Enable some previously omitted test scripts. Add a test cross-check.Jim Meyering
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Reenable this test. Adjust for new rm. * tests/mkdir/Makefile.am: Add writable-under-readonly. * tests/mkdir/writable-under-readonly: Add some comments. This test is always skipped, for now. * tests/Makefile.am (ta): Hook up the new root-only script. * tests/tail-2/infloop-1: Make this test pass. * tests/tail-2/Makefile.am (TESTS): Add infloop-1. * tests/tail-2/fflush: Remove unused file. * tests/check.mk (vc_executable_is_in_TESTS): More portable. * tests/check.mk (check): Depend on the above. * build-aux/check.mk: Remove comment mentioning AUTHORS file.
2007-09-15Factor out definitions in TESTS_ENVIRONMENT of srcdir, top_srcdir, etc.Jim Meyering
tests/check.mk (top_srcdir): Define. tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir), $(abs_top_srcdir), and $(abs_top_builddir), since they're defined via the included tests/check.mk.
2007-09-15More misc, test-related changes. (some to allow running tests as root)Jim Meyering
2007-09-15Convert tests/dd/*, too.Jim Meyering
2007-08-25Remove all .cvsignore files from version control.Jim Meyering
2007-08-18Run each Coreutils.pm-based test in its own subdirectory.Jim Meyering
* tests/CuTmpdir.pm: New file. * tests/Makefile.am (EXTRA_DIST): Add CuTmpdir.pm. * tests/misc/od, tests/misc/base64, tests/misc/basename: * tests/misc/cut, tests/misc/date, tests/misc/dirname: * tests/misc/expand, tests/misc/fold, tests/misc/head-elide-tail: * tests/misc/paste-no-nl, tests/misc/pr, tests/misc/sha224sum: * tests/misc/sha256sum, tests/misc/sha384sum, tests/misc/sha512sum: * tests/misc/sort-merge, tests/misc/stat-printf, tests/misc/test-diag: * tests/misc/wc-files0-from, tests/misc/xstrtol: * tests/dd/skip-seek, tests/dircolors/simple, tests/du/files0-from: * tests/expr/basic, tests/factor/basic, tests/fmt/basic: * tests/ls-2/tests, tests/md5sum/basic-1, tests/md5sum/newline-1: * tests/seq/basic, tests/sha1sum/basic-1, tests/sha1sum/sample-vec: * tests/sum/basic-1, tests/tsort/basic-1, tests/unexpand/basic-1: * tests/mv/i-1, tests/rm/empty-name, tests/rm/unreadable: Use it. * tests/misc/test-diag: Use "$ENV{abs_top_builddir}/src/test", not "../../src/test", so it works when run from a subdirectory. * tests/ls-2/tests: Create temp files and dirs from within the perl script, so that they're removed, when run from a subdirectory.
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
2007-07-10Change "version 2" to "version 3" in all copyright notices.Jim Meyering
2007-02-22Honor dd's noatime flag if possible, even if not supported on build fsPaul Eggert
* doc/coreutils.texi (dd invocation): Warn that noatime might not be reliable. * src/dd.c (flags, usage): Look at O_NOATIME, not HAVE_WORKING_O_NOATIME, to decide whether to support the noatime flag, so that dd attempts O_NOATIME even if the build file system does not support it. Problem reported by Jim Meyering today in bug-coreutils. * tests/dd/misc: Generate a warning, not a failure, if noatime exists but fails.
2007-01-13Put CU_TEST_NAME in the environment for each test run by "make check".Jim Meyering
* Transform all Makefile.am files so that when running "make check", CU_TEST_NAME is set to the name of the test. This is so that when I run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check" on the entire package it is more convenient to map a leak or error found in a valgrind log file back to the offending test. Use this command: (echo tests/Makefile.am.in; find tests -name Makefile.am) \ |xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \ -e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
2006-12-22* NEWS: dd bs= operands now silently override later ibs= and obs=,Paul Eggert
as POSIX requires. * src/dd.c (scanargs): Implement it. * tests/dd/misc (outbytes): Test it. * doc/coreutils.texi (dd invocation): Specify that bs=N overrides later ibs and obs, undoing part of the previous change. (The behavior was wrong.)
2006-10-22* tests/sample-test: Quote variables containing absolute buildJim Meyering
tree paths. In the cleanup trap, make sure `cd' succeeds before `chmod'ing and `rm'ing the temporary files. * tests/chgrp/basic: Likewise. * tests/chgrp/deref: Likewise. * tests/chgrp/no-x: Likewise. * tests/chgrp/posix-H: Likewise. * tests/chgrp/recurse: Likewise. * tests/chmod/c-option: Likewise. * tests/chmod/equal-x: Likewise. * tests/chmod/equals: Likewise. * tests/chmod/inaccessible: Likewise. * tests/chmod/no-x: Likewise. * tests/chmod/octal: Likewise. * tests/chmod/setgid: Likewise. * tests/chmod/umask-x: Likewise. * tests/chmod/usage: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/separator: Likewise. * tests/cp/acl: Likewise. * tests/cp/backup-1: Likewise. * tests/cp/backup-dir: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-HL: Likewise. * tests/cp/cp-deref: Likewise. * tests/cp/cp-i: Likewise. * tests/cp/cp-mv-backup: Likewise. * tests/cp/cp-parents: Likewise. * tests/cp/deref-slink: Likewise. * tests/cp/dir-rm-dest: Likewise. * tests/cp/dir-slash: Likewise. * tests/cp/dir-vs-file: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/link: Likewise. * tests/cp/link-no-deref: Likewise. * tests/cp/link-preserve: Likewise. * tests/cp/no-deref-link1: Likewise. * tests/cp/no-deref-link2: Likewise. * tests/cp/no-deref-link3: Likewise. * tests/cp/perm: Likewise. * tests/cp/preserve-2: Likewise. * tests/cp/r-vs-symlink: Likewise. * tests/cp/same-file: Likewise. * tests/cp/slink-2-slink: Likewise. * tests/cp/sparse: Likewise. * tests/cp/special-bits: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/symlink-slash: Likewise. * tests/dd/not-rewound: Likewise. * tests/dd/skip-seek2: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/deref: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/fd-leak: Likewise. * tests/du/hard-link: Likewise. * tests/du/inaccessible-cwd: Likewise. * tests/du/long-from-unreadable: Likewise. * tests/du/long-sloop: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/restore-wd: Likewise. * tests/du/slash: Likewise. * tests/du/slink: Likewise. * tests/du/trailing-slash: Likewise. * tests/du/two-args: Likewise. * tests/fmt/long-line: Likewise. * tests/install/basic-1: Likewise. * tests/install/create-leading: Likewise. * tests/install/d-slashdot: Likewise. * tests/install/trap: Likewise. * tests/ln/misc: Likewise. * tests/ln/target-1: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/inode: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-vs-dirent: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/close-stdout: Likewise. * tests/misc/csplit: Likewise. * tests/misc/date-sec: Likewise. * tests/misc/false-status: Likewise. * tests/misc/head-c: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/mknod: Likewise. * tests/misc/nl: Likewise. * tests/misc/nohup: Likewise. * tests/misc/pathchk1: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-long: Likewise. * tests/misc/shuf: Likewise. * tests/misc/sort-rand: Likewise. * tests/misc/split-a: Likewise. * tests/misc/split-fail: Likewise. * tests/misc/split-l: Likewise. * tests/misc/stat-fmt: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/concurrent-1: Likewise. * tests/mkdir/p-1: Likewise. * tests/mkdir/p-2: Likewise. * tests/mkdir/p-3: Likewise. * tests/mkdir/p-slashdot: Likewise. * tests/mkdir/p-thru-slink: Likewise. * tests/mkdir/p-v: Likewise. * tests/mkdir/parents: Likewise. * tests/mkdir/perm: Likewise. * tests/mkdir/t-slash: Likewise. * tests/mv/acl: Likewise. * tests/mv/atomic: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/childproof: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir-file: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/hard-2: Likewise. * tests/mv/hard-3: Likewise. * tests/mv/hard-4: Likewise. * tests/mv/hard-link-1: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-2: Likewise. * tests/mv/i-3: Likewise. * tests/mv/i-4: Likewise. * tests/mv/i-5: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self-4: Likewise. * tests/mv/leak-fd: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/no-target-dir: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/part-hardlink: Likewise. * tests/mv/part-rename: Likewise. * tests/mv/part-symlink: Likewise. * tests/mv/partition-perm: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/reply-no: Likewise. * tests/mv/trailing-slash: Likewise. * tests/mv/update: Likewise. * tests/od/od-N: Likewise. * tests/od/x8: Likewise. * tests/readlink/can-e: Likewise. * tests/readlink/can-f: Likewise. * tests/readlink/can-m: Likewise. * tests/readlink/rl-1: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dangling-symlink: Likewise. * tests/rm/deep-1: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/dot-rel: Likewise. * tests/rm/empty-inacc: Likewise. * tests/rm/f-1: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/hash: Likewise. * tests/rm/i-1: Likewise. * tests/rm/i-no-r: Likewise. * tests/rm/ignorable: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/ir-1: Likewise. * tests/rm/isatty: Likewise. * tests/rm/no-give-up: Likewise. * tests/rm/r-1: Likewise. * tests/rm/r-2: Likewise. * tests/rm/r-3: Likewise. * tests/rm/r-4: Likewise. * tests/rm/readdir-bug: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm4: Likewise. * tests/rm/rm5: Likewise. * tests/rm/sunos-1: Likewise. * tests/rm/unread2: Likewise. * tests/rm/unread3: Likewise. * tests/rmdir/fail-perm: Likewise. * tests/rmdir/t-slash: Likewise. * tests/shred/exact: Likewise. * tests/shred/remove: Likewise. * tests/sum/sysv: Likewise. * tests/tail-2/append-only: Likewise. * tests/tail-2/assert: Likewise. * tests/tail-2/assert-2: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/fflush: Likewise. * tests/tail-2/infloop-1: Likewise. * tests/tail-2/proc-ksyms: Likewise. * tests/tail-2/start-middle: Likewise. * tests/tail-2/tail-n0f: Likewise. * tests/tee/basic: Likewise. * tests/tee/dash: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/no-create-missing: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/obsolescent: Likewise. * tests/touch/read-only: Likewise. * tests/touch/relative: Likewise.
2006-08-22* aclocal.m4, config.hin, configure:Paul Eggert
Remove from CVS, since ./bootstrap generates them automatically. * .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log. Remove more-specific entries. This catches files like configure.lineno. * man/.cvsignore: Add Makefile.in. * src/.cvsignore: Add Makefile.in. Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c. For .cvsignore file under the tests directory: Add Makefile.in. Sort entries if necessary. Remove *.I, *.E, *.X, *.O, *-tests, build-script, mk-script if they're never created in this directory. * build-aux/.cvsignore: New file. * doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf, coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it is, but the makefile doesn't mention it). Remove coreutils.info as it is subsumed by coreutils.info*. * lib/.cvsignore: Add Makefile.in, getdate.tab.h. Remove stat.c, sysexit.h. * m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4, inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4, lock.m4, printf-posix.m4, same-inode.m4, size_max.m4, uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of these are put in automatically by ../bootstrap, but that's a bootstrap bug that I plan to fix shortly. * po/.cvsignore: More ../bootstrap-related fixes, plus remove old cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg, cat-id-dbl.c, messages.mo, stamp-cat-id.
2006-08-21Remove from CVS, since the bootstrap script generates them automatically.Paul Eggert
2006-08-19.Jim Meyering
2006-08-17Add/fix copyright notices and adjust to latest GNU FDL.Paul Eggert
2006-08-15.Jim Meyering
2006-08-09Regenerate.Paul Eggert
2006-08-09Regenerate.Paul Eggert
2006-07-17Regenerate.Paul Eggert
2006-07-09Regenerate.Paul Eggert
2006-07-03* tests/Makefile.am, tests/*/Makefile.am: (TESTS_ENVIRONMENT):Jim Meyering
Add $VG_PATH_PREFIX as a prefix to $PATH
2006-06-28* tests/mv/i-link-no: Work around HP-UX /bin/sh tracing problemJim Meyering
(set -x when VERBOSE=yes) when stderr is redirected before stdout causing shell tracing of the stdout redirection to be written to the stderr file. Avoid problem and test failure on HP-UX by redirecting stderr last. * tests/dd/unblock-sync: Order shell file redirections for stderr and stdout in the common style. tests/acl: Likewise.
2006-05-06.Jim Meyering
2006-03-26.Jim Meyering
2006-03-12.Jim Meyering
2006-03-08Add test cases for append, nofollow, directory,Paul Eggert
and nolinks flags. Simplify redirection to /dev/null in some cases.
2006-03-08iflags->iflag. This fixes a typo that meant thePaul Eggert
noatime test never tested anything.