summaryrefslogtreecommitdiff
path: root/tests/dd/misc
AgeCommit message (Collapse)Author
2012-04-04tests: convert nearly all `...` expressions to $(...)Jim Meyering
Exempt init.sh because it runs before we're assured to have a shell that groks $(...). Exempt *.mk because "$" would have to be doubled, and besides, any `...` expression in a .mk file is almost certainly evaluated before init.sh is run. Finally, also exempt the perl-based tests, because perl's `...` cannot be converted to $(...). Do that by running this command: git grep -l '`.*`' tests \ | grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \ | xargs perl -pi -e 's/`(.*?)`/\$($1)/g' One minor fix-up change was required after that, due to how quoting differs: diff --git a/tests/chmod/equals b/tests/chmod/equals - expected_perms=$(eval 'echo \$expected_'$dest) + expected_perms=$(eval 'echo $expected_'$dest) Another was to make these required quoting adjustments: diff --git a/tests/misc/stty b/tests/misc/stty ... - rev=$(eval echo "\\\$REV_$opt") + rev=$(eval echo "\$REV_$opt") ... - rev1=$(eval echo "\\\$REV_$opt1") - rev2=$(eval echo "\\\$REV_$opt2") + rev1=$(eval echo "\$REV_$opt1") + rev2=$(eval echo "\$REV_$opt2") Also, transform two files that were needlessly excluded above: (both use perl, but are mostly bourne shell) perl -pi -e 's/`(.*?)`/\$($1)/g' \ tests/du/long-from-unreadable tests/init.cfg
2012-01-27maint: use single copyright year rangeJim Meyering
Run "make update-copyright".
2012-01-09tests: change `...' to '...' on lines not matching /[=\$]/Jim Meyering
Exempt lines with '$' or '=', since those are prone to improper conversion. Run this: git grep -l "\`[^']*'" tests \ |xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-08-08tests: complete the renaming framework_failure -> framework_failure_Stefano Lattarini
These changes were mostly mechanical, made by running the following command: git grep -lw framework_failure | grep -v ChangeLog \ | xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/' and then editing init.cfg and `tests/cp/cp-a-selinux' by hand. * tests/init.cfg (framework_failure): Remove, `framework_failure_' from init.sh should be used instead in the tests. Remove now-obsolete "FIXME" comment. (is_local_dir_, require_strace_, require_membership_in_two_groups_, require_sparse_support_, skip_if_mcstransd_is_running_, mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'. * Many test scripts: Likewise.
2011-01-28tests: remove obsolete uses of "$$" in temporary file namesJim Meyering
Those were useful when tests might have been run in the same directory and in parallel. Now, each test is run in a newly- created empty directory. * tests/cp/backup-1: Remove obsolete uses of "$$". * tests/cp/same-file: Likewise. * tests/dd/misc: Likewise. * tests/mv/part-symlink: Likewise. * tests/mv/to-symlink: Likewise. * tests/touch/fail-diag: Likewise.
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-11-17tests: substitute the single-program $VERBOSE/--version usesJim Meyering
Automatically make all of the changes like this: -test "$VERBOSE" = yes && chgrp --version +print_ver_ chgrp git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \ 's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
2010-11-17tests: convert first batch of tests from test-lib.sh to init.shJim Meyering
Initially, I did this, git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script' but that line would have been much longer than the maximum permitted by coreutils' commit hook, and wasn't readable besides, so here's a more readable version: lhs=$(printf '%s\\n' \ 'if test "$VERBOSE" = yes; then' \ ' set -x' \ ' touch --version' \ 'fi' \ '' \ '. $srcdir/test-lib.sh' \ | sed 's/\$/\\\$/g;s/touch/(\\w+)/') rhs=$(printf '%s\\n' \ '. "${srcdir=.}/init.sh"; path_prepend_ ../src' \ 'test "$VERBOSE" = yes && FIXME --version' \ | sed 's/\$/\\\$/g;s/FIXME/\$1/') git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
2010-07-05tests: make tests requiring a delay to pass, more robustPádraig Brady
* tests/init.cfg: Introduce a retry_delay_() function to repeatedly call a test function that requires a delay. This delay can now be shorter for the common case on fast systems, but will double until a configurable limit it reached before failing on slower systems. * tests/dd/reblock: Use retry_delay_. * tests/misc/cat-buf: Likewise. * tests/misc/stdbuf: Likewise. * tests/tail-2/F-vs-rename: Likewise. * tests/tail-2/flush-initial: Likewise. * tests/tail-2/tail-n0f: Likewise. * tests/tail-2/wait: Likewise. * test/dd/misc: Comment that delay is needed to trigger failure.
2010-01-01maint: update all FSF copyright year lists to include 2010Jim Meyering
Use this command: git ls-files | grep -v COPYING \ | xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \ build-aux/update-copyright
2009-10-30tests: factor 350 fail=0 initializations into test-lib.shJim Meyering
Run this command to remove the factored-out "fail=0" lines. perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$') * tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts. * tests/...: nearly all bourne shell scripts Suggested by Eric Blake.
2009-06-23maint: update all Copyright year lists to include 2009Jim Meyering
2008-09-10tests: use "Exit $fail", not (exit $fail); exit $failJim Meyering
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63 * tests/**: Convert all uses: This restrictive change converted the vast majority: git grep -l '^(exit \$fail); exit \$fail$' \ | xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/' And this did the rest, plus a few undesirable ones, so I manually backed out the changes to ChangeLog-* and build-aux/check.mk: git grep -l -E '\(exit [^)]+\); exit ' \ | xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
2008-08-14set envvars via "env" to avoid spurious set -x output from bad shellsJim Meyering
* tests/dd/misc: Set LC_ALL=C via env. * tests/cp/thru-dangling: Set POSIXLY_CORRECT via env. This is necessary at least on AIX 5.3. Reported by Jeph Cowan and Ralf Wildenhues. Details here: http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/14235/focus=14257
2008-07-23dd: minor fullblock changesJim Meyering
* src/dd.c (O_FULLBLOCK): Define using an enum, not #define. Derive the value, rather than hard-coding to one that might conflict. (usage): Mention iflag=fullblock in --help output. (scanargs): Reset the O_FULLBLOCK bit, so that we don't try to set an undefined attribute via fcntl (fd, F_SETFL, ... * tests/dd/misc: Signal framework_failure when necessary. Use "compare actual expected", so any diffs look "right". * NEWS (dd): Alphabetize and reword. * coreutils.texi (dd invocation): Adjust wording.
2008-07-23dd: new option: iflag=fullblock to accumulate full input blocksKamil Dudka
* src/dd.c (iread_fullblock): New function for reading full blocks. (scanargs): Check for new parameter iflag=fullblock. (skip): Use iread_fnc pointer instead of iread function. (dd_copy): Use iread_fnc pointer instead of iread function. * tests/dd/misc: Add test for dd - read full blocks. * doc/coretuils.texi: Mention new parameter iflag=fullblock. * NEWS: Mentioned the change.
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-03-31dd bug fix: accept e.g., if=/dev/stdin and of=/dev/stdoutPaul Eggert
* lib/fd-reopen.c: Work even if FILE is "/dev/stdin". Problem reported by Geoffrey Lee in <http://bugs.debian.org/290727>. * tests/dd/misc: Check for this bug.
2008-03-28Require that "(exit $fail); exit $fail" be last line of each test.Jim Meyering
* maint.mk (sc_require_test_exit_idiom): New rule to enforce policy. * tests/cp/acl: Adhere to the new policy. * tests/cp/preserve-gid: Likewise. * tests/dd/misc: * tests/install/create-leading: * tests/ln/sf-1: * tests/ls/symlink-slash: * tests/misc/help-version: * tests/misc/ls-time: * tests/misc/nice: * tests/misc/shred-remove: * tests/misc/stty: * tests/misc/stty-row-col: * tests/mkdir/p-1: * tests/mkdir/p-2: * tests/mkdir/p-3: * tests/mkdir/p-v: * tests/mkdir/special-1: * tests/mkdir/writable-under-readonly: * tests/mv/acl: * tests/mv/backup-is-src: * tests/mv/diag: * tests/mv/dir-file: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/i-2: * tests/mv/i-4: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/partition-perm: * tests/mv/to-symlink: * tests/rmdir/ignore: * tests/tail-2/assert: * tests/tail-2/assert-2: * tests/touch/dangling-symlink: * tests/touch/dir-1: * tests/touch/empty-file: * tests/touch/fifo: * tests/touch/no-rights: Likewise. Signed-off-by: Jim Meyering <meyering@redhat.com>
2007-09-15More misc, test-related changes. (some to allow running tests as root)Jim Meyering
2007-09-15Convert tests/dd/*, too.Jim Meyering
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
2007-07-10Change "version 2" to "version 3" in all copyright notices.Jim Meyering
2007-02-22Honor dd's noatime flag if possible, even if not supported on build fsPaul Eggert
* doc/coreutils.texi (dd invocation): Warn that noatime might not be reliable. * src/dd.c (flags, usage): Look at O_NOATIME, not HAVE_WORKING_O_NOATIME, to decide whether to support the noatime flag, so that dd attempts O_NOATIME even if the build file system does not support it. Problem reported by Jim Meyering today in bug-coreutils. * tests/dd/misc: Generate a warning, not a failure, if noatime exists but fails.
2006-12-22* NEWS: dd bs= operands now silently override later ibs= and obs=,Paul Eggert
as POSIX requires. * src/dd.c (scanargs): Implement it. * tests/dd/misc (outbytes): Test it. * doc/coreutils.texi (dd invocation): Specify that bs=N overrides later ibs and obs, undoing part of the previous change. (The behavior was wrong.)
2006-08-17Add/fix copyright notices and adjust to latest GNU FDL.Paul Eggert
2006-03-08Add test cases for append, nofollow, directory,Paul Eggert
and nolinks flags. Simplify redirection to /dev/null in some cases.
2006-03-08iflags->iflag. This fixes a typo that meant thePaul Eggert
noatime test never tested anything.
2005-12-09add commentsJim Meyering
2005-12-09Add test for dd iflags=noatime.Paul Eggert
2004-09-19Check for "dd --".Paul Eggert
1999-04-11.Jim Meyering