Age | Commit message (Collapse) | Author |
|
Remove the optimization that avoided up to 50% of cp's read syscalls.
Do not assume that a short read on a regular file indicates EOF.
When reading from a file in /proc on linux [at least 2.6.9 - 2.6.29]
into a 4k-byte buffer or larger, a short read does not
always indicate EOF. For example, "cp /proc/slabinfo /tmp"
copies only 4068 of the total 7493 bytes. This optimization
(25719a33154f0c62ea9881f0c79ae312dd4cec7a, Improve performance a bit
by optimizing away; 2005-11-24) appears to have been worth less than
a 2% speed-up (and usually much less), so the impact of removing it
is negligible.
* src/copy.c (copy_reg): Don't exit the loop early.
* tests/cp/proc-short-read: New test, lightly based on a suggestion
from Mike Frysinger, to exercise this fix.
* tests/Makefile.am (TESTS): Add cp/proc-short-read.
* NEWS (Improve robustness): Mention this change.
|
|
* tests/test-lib.sh (skip_if_setgid_): New function.
* tests/setgid-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove setgid-check.
* tests/chmod/c-option: Use the new function rather than sourcing
the separate file.
* tests/cp/cp-parents: Likewise.
* tests/install/install-C: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
|
|
Running "mkdir dir; cp -rl dir dir" would create dir/dir/dir/...
rather than diagnosing the "copy-into-self" failure.
The easy fix would have been to revert this part of the change
[3ece0355 2008-11-09 cp: use far less memory in some cases]
that introduced the bug:
- remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
+ if (!x->hard_link)
+ remember_copied (dst_name, dst_sb.st_ino, dst_sb.st_dev);
However, that would have induced the failure of the new cp/link-heap
test, due to the added memory pressure of recording 10k dev/ino pairs.
And besides, I liked that improvement and wanted to keep it.
Now that it's obvious recording the just-created-directory dev/ino
needn't depend on the setting of hard_link, I realized it is necessary
to record the pair only for the first directory created for each
source command-line argument.
I made that change, then noticed the new test, cp -rl a d d, would pass
when run once, yet output the into-self diagnostic twice. Also note
the side effect: it creates d/a and d/d. However, running that same
command a second time, now with the modified directory, would fail.
That turned out to be due to the fact that although the first into-self
failure was detected in copy_dir, that function would continue copying
other entries regardless -- and that would make it fail (eventually)
with the unwanted recursion.
* src/copy.c (copy_internal): This function needed an indicator of
whether, for a give command line argument, it had already created its
first directory. If so, no more need to record dev/ino pairs. If this
is the first, then do record its pair. Hence, the new parameter.
(copy_dir, copy): Update callers.
(copy_dir): Upon any into-self failure, break out of the loop.
* tests/cp/into-self: Test for the above.
Reported by Mikael Magnusson.
|
|
* copy.c (copy_reg): Reduce SELinux context diagnostics for 'cp -a'.
(copy_internal): Likewise
* copy.h (cp_options): Add boolean reduce_diagnostics.
* cp.c (usage): Say that --archive (-a) behaves like -dR --preserve=all.
(cp_option_init): Initialize added reduce_diagnostics.
(main): Add reduce_diagnostics for the -a option, and preserve SELinux
context, if possible.
* mv.c (cp_options_init): Initialize new cp_options booleans.
* install.c (cp_option_init): Likewise.
* NEWS: Mention those behaviour changes.
* doc/coreutils.texi: Document --preserve=context, document that
diagnostics are not shown for failures of non-mandatory attributes
(just SELinux at the moment).
* tests/cp/cp-a-selinux: Check not only failures, but succesful use
of preserving SELinux context in cp.
|
|
* NEWS: Add 2009 to copyright.
* README: Likewise.
* README-hacking: Likewise.
* TODO: Likewise.
* doc/Makefile.am: Likewise.
* m4/prereq.m4: Likewise.
* src/nl.c: Likewise.
* src/seq.c: Likewise.
* tests/cp/cp-i: Likewise.
* tests/install/install-C: Likewise.
* tests/install/install-C-root: Likewise.
* tests/install/install-C-selinux: Likewise.
* tests/misc/seq: Likewise.
* tests/mv/mv-n: Likewise.
|
|
* src/cp.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* src/mv.c (usage): Show new option -n in --help.
(main): Handle new option -n.
* doc/coreutils.texi: Document new cp/mv option -n.
* tests/cp/cp-i: Add tests for -f, -i and -n options.
* tests/mv/mv-n: New test for mv -n.
* tests/Makefile.am: Add test mv/mv-n to the list.
* NEWS: Mention the change.
|
|
* tests/cp/link-heap: Raise virtual memory limit from 10,000
to 14,000, to avoid failure on Debian/unstable (libc6 2.7-16).
|
|
cp --link was "remembering" many name,dev,inode triples unnecessarily.
cp was doing the same, even without --link, for every directory in the
source hierarchy, while it can do its job with entries merely for the
command-line arguments. Prompted by a report from Patrick Shoenfeld.
Details <http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/15081>.
* src/copy.c (copy_internal): Refrain from remembering
name,dev,inode for most files, when invoked via cp --link.
Record an infloop-avoidance triple for each directory specified
on the command line, not for each directory in the source tree.
Don't record a dir-triple when x->hard_link is set.
* NEWS (Buf fixes): Mention it.
* tests/cp/link-heap: New file. Test for cp's lowered memory usage.
* tests/Makefile.am (TESTS): Add link-heap.
|
|
* tests/cp/link-preserve: Add a case and comments.
|
|
* tests/misc/help-version: Fix bad quoting.
* tests/cp/same-file: Fix unportable shell quoting.
* tests/mv/part-symlink: Likewise.
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
* tests/dd/misc: Set LC_ALL=C via env.
* tests/cp/thru-dangling: Set POSIXLY_CORRECT via env.
This is necessary at least on AIX 5.3.
Reported by Jeph Cowan and Ralf Wildenhues. Details here:
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/14235/focus=14257
|
|
* tests/cp/preserve-gid: Expect a cp-without-`-p'-created file to
have a group ID of $(id -g). Reported by Jarod Wilson. Details in
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13803/focus=13837
|
|
Address 2 of 4 failures reported by Jarod Wilson in
http://bugzilla.redhat.com/442352. More details here:
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13803
* tests/cp/cp-a-selinux: Skip the test if "mkfs -t ext2" fails.
* tests/rm/fail-2eperm: Skip the test if "rm" is not accessible.
|
|
|
|
so that e.g., tests/* may refer to absolute names without
hard-coding the name of the containing directory (tests/, here).
* tests/check.mk (TESTS_ENVIRONMENT): Define abs_srcdir.
* tests/pr/pr-tests: Use $abs_srcdir/pr not $abs_top_srcdir/tests/pr.
* tests/chmod/c-option: Use $abs_srcdir, not $abs_top_srcdir/tests.
* tests/cp/cp-parents: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/backup-is-src: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/into-self-2: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/sample-test: Likewise.
|
|
* tests/sparse-file: Remove file Move contents into ...
* tests/test-lib.sh (require_sparse_support_): ...here. New function.
* tests/cp/sparse: Use the function, not the file.
* tests/du/8gb: Likewise.
* tests/Makefile.am (EXTRA_DIST): Remove sparse-file.
|
|
* tests/group-names: Remove file Move contents into ...
* tests/test-lib.sh (require_membership_in_two_groups_): ...here. New function.
* tests/chgrp/basic: Use the function, not the file.
* tests/chgrp/default-no-deref: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chgrp/no-x: Likewise.
* tests/chgrp/posix-H: Likewise.
* tests/chgrp/recurse: Likewise.
* tests/cp/existing-perm-race: Likewise.
* tests/Makefile.am (EXTRA_DIST): Remove group-names.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ...
... rather than in each of 100+ test scripts.
* tests/chgrp/basic:
* tests/chgrp/no-x:
* tests/chmod/c-option:
* tests/chmod/no-x:
* tests/chmod/setgid:
* tests/chmod/thru-dangling:
* tests/chmod/umask-x:
* tests/chmod/usage:
* tests/chown/basic:
* tests/chown/deref:
* tests/chown/preserve-root:
* tests/cp/abuse:
* tests/cp/acl:
* tests/cp/backup-is-src:
* tests/cp/cp-a-selinux:
* tests/cp/cp-i:
* tests/cp/cp-mv-backup:
* tests/cp/deref-slink:
* tests/cp/fail-perm:
* tests/cp/into-self:
* tests/cp/link-preserve:
* tests/cp/preserve-gid:
* tests/cp/same-file:
* tests/cp/slink-2-slink:
* tests/cp/special-f:
* tests/cp/symlink-slash:
* tests/cp/thru-dangling:
* tests/du/basic:
* tests/du/hard-link:
* tests/du/inacc-dest:
* tests/du/long-sloop:
* tests/du/no-x:
* tests/install/basic-1:
* tests/ln/hard-backup:
* tests/ln/sf-1:
* tests/ls/file-type:
* tests/ls/infloop:
* tests/ls/nameless-uid:
* tests/ls/rt-1:
* tests/ls/stat-failed:
* tests/ls/symlink-slash:
* tests/ls/x-option:
* tests/misc/chcon:
* tests/misc/chcon-fail:
* tests/misc/csplit:
* tests/misc/df-P:
* tests/misc/groups-dash:
* tests/misc/groups-version:
* tests/misc/nohup:
* tests/misc/printf-surprise:
* tests/misc/runcon-no-reorder:
* tests/misc/selinux:
* tests/misc/split-a:
* tests/misc/split-fail:
* tests/misc/tac-continue:
* tests/misc/wc-files0:
* tests/mkdir/p-v:
* tests/mkdir/selinux:
* tests/mv/acl:
* tests/mv/backup-dir:
* tests/mv/backup-is-src:
* tests/mv/childproof:
* tests/mv/diag:
* tests/mv/dir2dir:
* tests/mv/dup-source:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/hard-verbose:
* tests/mv/i-2:
* tests/mv/i-3:
* tests/mv/i-4:
* tests/mv/i-5:
* tests/mv/i-link-no:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/mv-special-1:
* tests/mv/part-fail:
* tests/mv/part-symlink:
* tests/mv/partition-perm:
* tests/mv/perm-1:
* tests/mv/reply-no:
* tests/mv/sticky-to-xpart:
* tests/mv/update:
* tests/rm/cycle:
* tests/rm/dir-no-w:
* tests/rm/dir-nonrecur:
* tests/rm/fail-2eperm:
* tests/rm/fail-eacces:
* tests/rm/inaccessible:
* tests/rm/interactive-always:
* tests/rm/interactive-once:
* tests/rm/isatty:
* tests/rm/one-file-system:
* tests/rm/r-1:
* tests/rm/r-2:
* tests/rm/rm1:
* tests/rm/rm2:
* tests/rm/rm3:
* tests/rm/rm4:
* tests/rm/rm5:
* tests/rm/unread2:
* tests/rm/v-slash:
* tests/touch/fail-diag:
* tests/touch/not-owner:
|
|
* README (Running tests as root): Also set PATH in suggested "sudo"
command. This avoids failure of at least tests/cp/cp-a-selinux
when the default PATH does not contain /sbin.
* tests/cp/cp-a-selinux: Don't redirect stderr to /dev/null.
"mkfs" was failing due to /sbin not being in PATH.
|
|
* tests/cp/abuse: Remove ". $top_srcdir/tests/envvar-check".
* tests/cp/parent-perm: Likewise.
* tests/cp/special-f: Likewise.
* tests/ls/proc-selinux-segfault: Likewise.
* tests/misc/help-version: Likewise.
* tests/mkdir/selinux: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/touch/now-owned-by-other: Likewise.
* tests/sample-test: Remove commented out suggestion.
|
|
* tests/cp/perm: Use stat to get the permission string, not ls.
This test was run only when RUN_VERY_EXPENSIVE_TESTS=yes was set
in the environment. It would fail on SELinux-enable systems
because ls-generated permission strings would not match, e.g.,
"test _-rw-r--r--+ = _-rw-r--r--" would fail.
|
|
* tests/chmod/thru-dangling: Source lang-default.
* tests/cp/thru-dangling: Likewise.
* tests/misc/printf-surprise: Likewise.
|
|
* tests/test-lib.sh (working_umask_or_skip_): New function, from...
* tests/umask-check: ...here. Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove umask-check.
* tests/mkdir/perm: Use the function rather than sourcing the file.
* tests/cp/cp-parents: Likewise.
* tests/cp/parent-perm: Likewise.
Bruno Haible reported that parent-perm was failing to run umask-check.
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
* src/copy.c (copy_internal): Revert change of 2005-03-01,
4303f0454592421eea48be87777d32a49e1d5e5b
Prompted by Michael Stone, who pointed me to an old bug report from
Ian Jackson: http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/7504
* tests/cp/special-f: New file. Test for the above.
* tests/cp/Makefile.am (TESTS): Add special-f.
* NEWS: mention this bug fix.
|
|
When mcstransd is not running (i.e., after service mcstrans stop),
"make check" as root would provoke two test failures.
* tests/cp/cp-a-selinux: Use the context, root:object_r:tmp_t:s0,
that works both with and without mcstransd.
Thanks to Eric Paris for the tip and to Ondřej Vašík for alerting
me to the problem.
Reported by Robert Scheck in <http://bugzilla.redhat.com/436717>.
|
|
* maint.mk (sc_require_test_exit_idiom): New rule to enforce policy.
* tests/cp/acl: Adhere to the new policy.
* tests/cp/preserve-gid: Likewise.
* tests/dd/misc:
* tests/install/create-leading:
* tests/ln/sf-1:
* tests/ls/symlink-slash:
* tests/misc/help-version:
* tests/misc/ls-time:
* tests/misc/nice:
* tests/misc/shred-remove:
* tests/misc/stty:
* tests/misc/stty-row-col:
* tests/mkdir/p-1:
* tests/mkdir/p-2:
* tests/mkdir/p-3:
* tests/mkdir/p-v:
* tests/mkdir/special-1:
* tests/mkdir/writable-under-readonly:
* tests/mv/acl:
* tests/mv/backup-is-src:
* tests/mv/diag:
* tests/mv/dir-file:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/i-2:
* tests/mv/i-4:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/partition-perm:
* tests/mv/to-symlink:
* tests/rmdir/ignore:
* tests/tail-2/assert:
* tests/tail-2/assert-2:
* tests/touch/dangling-symlink:
* tests/touch/dir-1:
* tests/touch/empty-file:
* tests/touch/fifo:
* tests/touch/no-rights: Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
* tests/mv/acl: Likewise.
* tests/cp/acl: Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
* tests/priv-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove priv-check.
* tests/test-lib.sh (require_root_): New function.
Use this function rather than sourcing the priv-check file.
* tests/sample-test: Use require_root_ rather than priv-check.
* tests/chown/basic: Likewise.
* tests/cp/cp-a-selinux: Likewise.
* tests/cp/preserve-gid: Likewise.
* tests/cp/special-bits: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/misc/chcon: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/touch/now-owned-by-other: Likewise.
* tests/rm/fail-eperm: Use skip_if_root_ rather than priv-check.
* Makefile.maint (sc_root_tests): Reflect this change:
search for the new function name.
|
|
* tests/mv/no-target-dir: Likewise.
* tests/other-fs-tmpdir: Likewise.
* tests/rm/empty-name: Likewise.
* tests/rm/fail-eperm: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/unreadable: Likewise.
* tests/setgid-check: Likewise.
* tests/sparse-file: Likewise.
* tests/strace: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/touch/dangling-symlink: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/not-owner: Likewise.
* tests/mv/i-3: Likewise.
* tests/umask-check: Likewise.
* tests/mv/acl: Likewise.
* tests/cp/acl: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chmod/setgid: Likewise.
* tests/cp/existing-perm-race: Likewise.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/slink: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/md5sum-newline: Likewise.
* tests/misc/nice: Likewise.
* tests/misc/od-x8: Likewise.
* tests/misc/pwd-unreadable-parent: Likewise.
* tests/misc/selinux: Likewise.
* tests/misc/stty-row-col: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/arch: Likewise, and source $srcdir/../test-lib.sh *before*
the use of skip_test_.
|
|
* tests/very-expensive: Remove file.
* tests/test-lib.sh (very_expensive_): New function.
* tests/Makefile.am (EXTRA_DIST): Remove very-expensive.
* tests/cp/perm: Call the new function, rather than sourcing the file.
* tests/tail-2/assert: Likewise.
* tests/tail-2/assert-2: Likewise.
* tests/du/2g: Likewise.
|
|
* tests/acl: Remove file.
* tests/test-lib.sh (require_acl_): New function.
* tests/cp/acl: Use require_acl_ instead.
* tests/mv/acl: Likewise.
* tests/Makefile.am (EXTRA_DIST): Remove acl.
|
|
* tests/cp/parent-perm: Also check that perms of existing dest
dirs are changed to match those of corresponding src dir
|
|
This avoids another spurious Mac OS 10.5.1 (Darwin 9.1) test failure.
* tests/cp/preserve-gid: Accept a group ID of 0, as well.
Reported by Elias Pipping.
|
|
* tests/cp/preserve-gid: Set group as well as owner on ".".
Reported by Elias Pipping.
|
|
* tests/cp/parent-perm: Accommodate the situation in which
chmod ("dir", 02755) returns 0 yet fails to set the S_ISGID bit.
|
|
* tests/cp/parent-perm: New script. Test today's change.
Based on reproducer from Jan Blunck.
* tests/cp/Makefile.am (TESTS): Add parent-perm.
|
|
* tests/cp/existing-perm-race: Update file mode.
|
|
* tests/cp/Makefile.am (TESTS): Add existing-perm-race.
* tests/cp/existing-perm-race: New test. It isn't much of a
test yet, since it's hard to catch the race, but it has a FIXME
that will let us do a better test later.
|
|
* tests/cp/fail-perm: Ensure that '.'s set-GID bit is off.
|
|
* tests/cp/preserve-gid: Split some long lines.
Prepend "+" to numeric uid and gid chown arguments, on principle.
Use skip_test_.
|
|
* tests/cp/preserve-gid: New file. Test for today's change.
* tests/cp/Makefile.am (TESTS): Add preserve-gid.
* tests/Makefile.am (all_t): Add tc.
(tc): New target.
|
|
* NEWS: Mention this change.
* doc/coreutils.texi (cp invocation): Describe the new behavior.
* src/copy.c: No longer include "canonicalize.h".
(copy_reg): Upon failure to open a dangling destination symlink, don't
canonicalize the name, but rather fail (default) or, with POSIXLY_CORRECT,
repeat the open call without O_EXCL (potentially dangerous).
* src/copy.h (struct cp_options) [open_dangling_dest_symlink]:
New member. Reorder the others, grouping "bool" and "enum"
members together.
* tests/cp/thru-dangling: Test for changed and new behavior.
* src/cp.c (cp_option_init): Initialize new member.
* src/install.c (cp_option_init): Likewise.
* src/mv.c (cp_option_init): Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
* tests/cp/same-file: Detect when linking to a symlink links to
the target of the symlink (FreeBSD 6.1 does this, Linux does not),
and skip the few tests that would otherwise fail.
Redirect output of final comparison to stderr, since all stdout
is already redirected.
|
|
* tests/Makefile.am.in (TESTS_ENVIRONMENT): Remove definition.
* tests/chgrp/Makefile.am: Likewise.
* tests/chmod/Makefile.am: Likewise.
* tests/chown/Makefile.am: Likewise.
* tests/cp/Makefile.am: Likewise.
* tests/dd/Makefile.am: Likewise.
* tests/du/Makefile.am: Likewise.
* tests/install/Makefile.am: Likewise.
* tests/ln/Makefile.am: Likewise.
* tests/ls/Makefile.am: Likewise.
* tests/misc/Makefile.am: Likewise.
* tests/mkdir/Makefile.am: Likewise.
* tests/mv/Makefile.am: Likewise.
* tests/readlink/Makefile.am: Likewise.
* tests/rm/Makefile.am: Likewise.
* tests/rmdir/Makefile.am: Likewise.
* tests/tail-2/Makefile.am: Likewise.
* tests/touch/Makefile.am: Likewise.
* tests/check.mk (TESTS_ENVIRONMENT) [EXEEXT, EGREP, MAKE, PERL]:
[CONFIG_HEADER, build_programs, host_os, host_triplet, PATH]:
[REPLACE_GETCWD, CU_TEST_NAME]: Add definitions here.
* tests/misc/pwd-long: Use $abs_top_builddir/src, not $BUILD_SRC_DIR.
* tests/dd/skip-seek: Don't use $ENV{PROG}.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Likewise.
* tests/mv/i-1: Likewise.
|
|
* tests/test-lib.sh (require_selinux_): New function.
* tests/misc/chcon: Use it.
* tests/misc/selinux: Use it here, too.
* tests/cp/cp-a-selinux: and here.
* tests/selinux: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove selinux.
Reported by Mike Frysinger and Bauke Jan Douma.
|
|
* src/copy.c (copy_internal): When same-file detection requires
'stat'ing the destination file, also 'lstat' it and ensure that
it wasn't the destination of a preceding copy operation.
This bug was introduced on 2007-06-18.
* tests/cp/abuse: New test for the above.
* tests/cp/Makefile.am (TESTS): Add abuse.
|
|
|
|
* tests/check.mk: Also define abs_top_builddir.
|