| Age | Commit message (Collapse) | Author |
|---|
|
I started with the patches from Red Hat.
The entries below tell how the code evolved.
* src/ls.c (print_long_format, print_file_name_and_frills): When
there is no security context (due to getfilecon/lgetfilecon failing
with e.g. ENOTSUP), print it as "?", not "".
* src/ls.c (print_file_name_and_frills): Make -Z work without -l.
(length_of_file_name_and_frills): Likewise.
* src/ls.c: Remove the --lcontext and --scontext options.
Change the way -Z, --context work so that it no longer implies -l.
Thus, -Z -l will work like -lcontext and -Z without -l will work
like --scontext.
Adjust tests to reflect new 'ls -l' syntax -- affects only
systems with SELinux when operating on a file with no ACL.
These tests assumed that everything before the first space on
each line is the 10-byte mode string. But there may also be a "+"
in the 11th column, just before the space. However, note that this
is not new. The same thing would have happened even without the
change below, when listing a file with an ACL.
* tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm:
* tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod:
* tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm:
Don't make compilation depend on USE_ACL. An SELinux security
context counts as an "alternate access control method", so ls
must output a "+" for each file with a security context.
* src/ls.c [struct fileinfo] (have_acl): Declare unconditionally.
(FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly.
(gobble_file): Record whether a file has a security context, and
update the condition used to determine whether to print the "+".
(gobble_file): Call getfilecon/lgetfilecon also when
format == long_format, so that we get the "+".
* src/ls.c (gobble_file): Add a comment explaining why (with a
security context option) ls doesn't exit nonzero due to e.g.,
getfilecon failing with errno == ENOTSUP.
* src/ls.c (gobble_file): Ignore failure of getfilecon if it's due
to ENOTSUP.
* src/ls.c (gobble_file): Factor out three small blocks using
getfilecon and lgetfilecon.
Don't ignore return value from getfilecon and lgetfilecon.
* src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C
ternary operator).
(print_scontext_format): Likewise.
(print_scontext): Declare to be "bool", not int. Adjust uses.
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX).
* tests/misc/chcon: New file.
* tests/misc/chcon-fail: New file.
* tests/Makefile.am (check-root): Run new, root-only misc/chcon test.
* tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail.
* tests/misc/Makefile.am (TESTS): Add selinux.
* tests/misc/selinux: New file.
* tests/help-version: Skip chcon.
|
|
string suffix, and all it does (beyond the default "gnu" option)
is to _require_ the THANKS file.
* configure.ac (AM_INIT_AUTOMAKE): Remove it.
Remove all AUTOMAKE_OPTIONS settings in Makefile.am files.
* tests/chgrp/Makefile.am, tests/chmod/Makefile.am:
* tests/chown/Makefile.am, tests/cp/Makefile.am:
* tests/du/Makefile.am, tests/expr/Makefile.am:
* tests/factor/Makefile.am, tests/general/Makefile.am:
* tests/install/Makefile.am, tests/ln/Makefile.am:
* tests/ls/Makefile.am, tests/mkdir/Makefile.am:
* tests/mv/Makefile.am, tests/readlink/Makefile.am:
* tests/rm/Makefile.am, tests/rmdir/Makefile.am:
* tests/seq/Makefile.am, tests/stty/Makefile.am:
* tests/tee/Makefile.am, tests/touch/Makefile.am:
|
|
* Transform all Makefile.am files so that when running "make check",
CU_TEST_NAME is set to the name of the test. This is so that when I
run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check"
on the entire package it is more convenient to map a leak or error
found in a valgrind log file back to the offending test.
Use this command:
(echo tests/Makefile.am.in; find tests -name Makefile.am) \
|xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \
-e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
|
|
Reported by Mike Frysinger, in
http://article.gmane.org/gmane.comp.gnu.core-utils.bugs/8831
* tests/du/inacc-dest: New test, based on an example from Mike Frysinger.
* tests/chgrp/no-x: Remove the "fts_read failed: ..."
diagnostic from the expected output when using native fdopendir.
* tests/chmod/no-x: Likewise.
* tests/du/no-x: Likewise.
|
|
[patch by Paul Eggert]
* tests/chmod/c-option: When double-quoting part of a word, prefer
to double-quote the whole word. This is a bit easier to read (at
least for me), and in some cases it avoids a shell bug with Tru64
4.0 sh reported by Nelson H. F. Beebe. For example, instead of
"$abs_srcdir"/../setgid-check we now write
"$abs_srcdir/../setgid-check".
* tests/cp/cp-parents: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/trap: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/unread3: Likewise.
* tests/touch/no-create-missing: Likewise.
* lib/.cvsignore: Add uinttostr.c.
|
|
* tests/cp/cp-parents: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
|
|
tree paths. In the cleanup trap, make sure `cd' succeeds before
`chmod'ing and `rm'ing the temporary files.
* tests/chgrp/basic: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chgrp/no-x: Likewise.
* tests/chgrp/posix-H: Likewise.
* tests/chgrp/recurse: Likewise.
* tests/chmod/c-option: Likewise.
* tests/chmod/equal-x: Likewise.
* tests/chmod/equals: Likewise.
* tests/chmod/inaccessible: Likewise.
* tests/chmod/no-x: Likewise.
* tests/chmod/octal: Likewise.
* tests/chmod/setgid: Likewise.
* tests/chmod/umask-x: Likewise.
* tests/chmod/usage: Likewise.
* tests/chown/basic: Likewise.
* tests/chown/deref: Likewise.
* tests/chown/separator: Likewise.
* tests/cp/acl: Likewise.
* tests/cp/backup-1: Likewise.
* tests/cp/backup-dir: Likewise.
* tests/cp/backup-is-src: Likewise.
* tests/cp/cp-HL: Likewise.
* tests/cp/cp-deref: Likewise.
* tests/cp/cp-i: Likewise.
* tests/cp/cp-mv-backup: Likewise.
* tests/cp/cp-parents: Likewise.
* tests/cp/deref-slink: Likewise.
* tests/cp/dir-rm-dest: Likewise.
* tests/cp/dir-slash: Likewise.
* tests/cp/dir-vs-file: Likewise.
* tests/cp/fail-perm: Likewise.
* tests/cp/into-self: Likewise.
* tests/cp/link: Likewise.
* tests/cp/link-no-deref: Likewise.
* tests/cp/link-preserve: Likewise.
* tests/cp/no-deref-link1: Likewise.
* tests/cp/no-deref-link2: Likewise.
* tests/cp/no-deref-link3: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/cp/r-vs-symlink: Likewise.
* tests/cp/same-file: Likewise.
* tests/cp/slink-2-slink: Likewise.
* tests/cp/sparse: Likewise.
* tests/cp/special-bits: Likewise.
* tests/cp/src-base-dot: Likewise.
* tests/cp/symlink-slash: Likewise.
* tests/dd/not-rewound: Likewise.
* tests/dd/skip-seek2: Likewise.
* tests/dd/unblock-sync: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/basic: Likewise.
* tests/du/deref: Likewise.
* tests/du/deref-args: Likewise.
* tests/du/exclude: Likewise.
* tests/du/fd-leak: Likewise.
* tests/du/hard-link: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/no-deref: Likewise.
* tests/du/no-x: Likewise.
* tests/du/restore-wd: Likewise.
* tests/du/slash: Likewise.
* tests/du/slink: Likewise.
* tests/du/trailing-slash: Likewise.
* tests/du/two-args: Likewise.
* tests/fmt/long-line: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/create-leading: Likewise.
* tests/install/d-slashdot: Likewise.
* tests/install/trap: Likewise.
* tests/ln/misc: Likewise.
* tests/ln/target-1: Likewise.
* tests/ls/color-dtype-dir: Likewise.
* tests/ls/dangle: Likewise.
* tests/ls/dired: Likewise.
* tests/ls/file-type: Likewise.
* tests/ls/follow-slink: Likewise.
* tests/ls/infloop: Likewise.
* tests/ls/inode: Likewise.
* tests/ls/m-option: Likewise.
* tests/ls/no-arg: Likewise.
* tests/ls/recursive: Likewise.
* tests/ls/rt-1: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/ls/stat-failed: Likewise.
* tests/ls/stat-vs-dirent: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/misc/csplit: Likewise.
* tests/misc/date-sec: Likewise.
* tests/misc/false-status: Likewise.
* tests/misc/head-c: Likewise.
* tests/misc/head-pos: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/nl: Likewise.
* tests/misc/nohup: Likewise.
* tests/misc/pathchk1: Likewise.
* tests/misc/printf: Likewise.
* tests/misc/printf-hex: Likewise.
* tests/misc/pwd-long: Likewise.
* tests/misc/shuf: Likewise.
* tests/misc/sort-rand: Likewise.
* tests/misc/split-a: Likewise.
* tests/misc/split-fail: Likewise.
* tests/misc/split-l: Likewise.
* tests/misc/stat-fmt: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/wc-files0: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-2: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/p-slashdot: Likewise.
* tests/mkdir/p-thru-slink: Likewise.
* tests/mkdir/p-v: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mkdir/t-slash: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/atomic: Likewise.
* tests/mv/backup-dir: Likewise.
* tests/mv/childproof: Likewise.
* tests/mv/diag: Likewise.
* tests/mv/dir-file: Likewise.
* tests/mv/dir2dir: Likewise.
* tests/mv/dup-source: Likewise.
* tests/mv/hard-2: Likewise.
* tests/mv/hard-3: Likewise.
* tests/mv/hard-4: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/hard-verbose: Likewise.
* tests/mv/i-2: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/i-4: Likewise.
* tests/mv/i-5: Likewise.
* tests/mv/i-link-no: Likewise.
* tests/mv/into-self-4: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/no-target-dir: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/perm-1: Likewise.
* tests/mv/reply-no: Likewise.
* tests/mv/trailing-slash: Likewise.
* tests/mv/update: Likewise.
* tests/od/od-N: Likewise.
* tests/od/x8: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/readlink/rl-1: Likewise.
* tests/rm/cycle: Likewise.
* tests/rm/dangling-symlink: Likewise.
* tests/rm/deep-1: Likewise.
* tests/rm/dir-no-w: Likewise.
* tests/rm/dir-nonrecur: Likewise.
* tests/rm/dot-rel: Likewise.
* tests/rm/empty-inacc: Likewise.
* tests/rm/f-1: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/hash: Likewise.
* tests/rm/i-1: Likewise.
* tests/rm/i-no-r: Likewise.
* tests/rm/ignorable: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/ir-1: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/r-1: Likewise.
* tests/rm/r-2: Likewise.
* tests/rm/r-3: Likewise.
* tests/rm/r-4: Likewise.
* tests/rm/readdir-bug: Likewise.
* tests/rm/rm1: Likewise.
* tests/rm/rm2: Likewise.
* tests/rm/rm3: Likewise.
* tests/rm/rm4: Likewise.
* tests/rm/rm5: Likewise.
* tests/rm/sunos-1: Likewise.
* tests/rm/unread2: Likewise.
* tests/rm/unread3: Likewise.
* tests/rmdir/fail-perm: Likewise.
* tests/rmdir/t-slash: Likewise.
* tests/shred/exact: Likewise.
* tests/shred/remove: Likewise.
* tests/sum/sysv: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/assert: Likewise.
* tests/tail-2/assert-2: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/fflush: Likewise.
* tests/tail-2/infloop-1: Likewise.
* tests/tail-2/proc-ksyms: Likewise.
* tests/tail-2/start-middle: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/tee/basic: Likewise.
* tests/tee/dash: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
|
|
* tests/chmod/Makefile.am (TESTS): Add inaccessible.
|
|
Remove from CVS, since ./bootstrap generates them automatically.
* .cvsignore: Add INSTALL, Makefile.in, *.cache, *.lineno, *.log.
Remove more-specific entries. This catches files like configure.lineno.
* man/.cvsignore: Add Makefile.in.
* src/.cvsignore: Add Makefile.in.
Remove .version, dir.c, install, mvdir, stamp-v, vdir.c, version.c.
For .cvsignore file under the tests directory:
Add Makefile.in. Sort entries if necessary. Remove *.I, *.E,
*.X, *.O, *-tests, build-script, mk-script if they're never
created in this directory.
* build-aux/.cvsignore: New file.
* doc/.cvsignore: Add Makefile.in, coreutils.html, coreutils.pdf,
coreutils.ps, coreutils.tps. Remove coreutils.cm (dunno what it
is, but the makefile doesn't mention it). Remove coreutils.info
as it is subsumed by coreutils.info*.
* lib/.cvsignore: Add Makefile.in, getdate.tab.h.
Remove stat.c, sysexit.h.
* m4/.cvsignore: Remove Makefile, dev-ino.m4, glibc2.m4, intdiv0.m4,
inttypes-h.m4, inttypes-pri.m4, jm-glibc-io.m4, lcmessage.m4,
lock.m4, printf-posix.m4, same-inode.m4, size_max.m4,
uintmax_t.m4, ulonglong.m4, visibility.m4, xsize.m4. Many of
these are put in automatically by ../bootstrap, but that's a
bootstrap bug that I plan to fix shortly.
* po/.cvsignore: More ../bootstrap-related fixes, plus remove old
cruft. Add *.po, LINGUAS, Makevars. Remove *.cat, *.msg,
cat-id-dbl.c, messages.mo, stamp-cat-id.
|
|
|
|
|
|
|
|
Skip this test if "chmod g+s d" silently does nothing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add $VG_PATH_PREFIX as a prefix to $PATH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
one you get when using openat-enabled fts.c and du (coming soon).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove all files in inner loop.
Otherwise, with a touch program that fails on unwritable files,
(this happens at least on linux-2.2.20) a -w file left behind
from a previous iteration could cause a spurious test failure.
|
|
comments about why the old version was desired.
|
|
Fix apparent typos (s/files/file/) in inner loop.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
