summaryrefslogtreecommitdiff
path: root/tests/check.mk
AgeCommit message (Collapse)Author
2011-10-17maint: speed up make check (vc_exe_in_TESTS)Pádraig Brady
* tests/check.mk (vc_exe_in_TESTS): The main change is to not start a sed process for each file under tests/, which was taking around 2.5s on a 2.1GHz i3-2310M. Also adjust the rule to no longer use temporary files.
2011-06-19tests: make test runner a script, not a shell functionStefano Lattarini
This change implements a more correct and idiomatic use of the features of the Automake-provided 'parallel-tests' harness. Moreover, this change is required in order for the testsuite to continue to work with the new testsuite harness that is planned to be introduced in Automake 1.12 (which, as of the writing date, is still under development and in alpha state). * tests/shell-or-perl: New auxiliary script. * tests/Makefile.am (EXTRA_DIST): Distribute it. * tests/check.mk (TESTS_ENVIRONMENT): Remove definition of the `shell_or_perl_' shell function, whose code has been moved in the new script above (with a few improvements and extensions). Do not use it to run the test scripts. (LOG_COMPILER): New, properly invoking `shell-or-perl'.
2011-06-14tests: accommodate HP-UX and ksh-derived shellsJim Meyering
Running "make check" normally prints a diagnostic to the outermost stderr (usually a tty) to explain why a test is skipped. It did this by redirecting FD 9 to stderr (via "exec 9>&2") before invoking the shell script. Shell scripts write skip-explanation to FD 9 via init.sh's skip_ function. However, with ksh and HP-UX's /bin/sh, the effects of "exec 9>&2" are canceled upon fork-and-exec, so we would get a "Bad file number" diagnostic and no skip explanation on those systems. * tests/check.mk (TESTS_ENVIRONMENT): Redirect more portably, via "$(SHELL) 9>&2", rather than the prior "exec 9>&2; $(SHELL) ..." Actually, we use "shell_or_perl_ 9>&2", to make this effective also for the perl-based tests. * tests/init.sh (stderr_fileno_): Update the advice in comments. See http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/22488 for lots of discussion. Stefano Lattarini suggested the solution of putting "9>&2" after the command. Reported by Bruno Haible.
2011-04-28tests: write skip explanation from perl scripts also to outer stderrJim Meyering
* tests/CuSkip.pm (skip): New file/module/function, to help the perl test scripts "skip" a test consistently, emitting a diagnostic both into the log file and into the outermost stderr stream that is more likely to be seen by a human. * tests/check.mk (TESTS_ENVIRONMENT): Add -MCuSkip. * tests/misc/date-next-dow: Use CuSkip::skip in place of warn+exit-77. * tests/misc/tty-eof: Likewise. * tests/misc/uniq: Likewise. * tests/rm/fail-eperm: Likewise. * tests/misc/md5sum-newline: Likewise. Also, s/program_name/ME/. * tests/misc/ls-misc (setuid_setup, main): Likewise. * tests/misc/pwd-long: Likewise, and add -I"$abs_srcdir" -MCuSkip to the $PERL invocation command. Inspired by a request from Bruno Haible regarding misc/tty-eof: http://debbugs.gnu.org/8570
2011-02-10tests: fix bug in preceding check.mk changeJim Meyering
* tests/check.mk (.built-programs): Run cd'd submake in a subshell so the redirected output ends up in the current directory, not ../src.
2011-02-10tests: avoid gross inefficiency in "make test"Jim Meyering
Do not run a sub-make to set up the environment for each and every test script. Instead, run it just once and store the result in a file. * tests/check.mk (built_programs): Remove definition. (.built-programs): New rule to create the temporary file. (CLEANFILES): Arrange to remove it. (TESTS_ENVIRONMENT): Simply cat .built-programs, rather than running the sub-make. * .gitignore: Ignore it.
2011-01-26tests: don't hide all trace of the vc_exe_in_TESTS testJim Meyering
There was a non-negligible delay after running a single test. Now, you'll know why when you see this test's name. * tests/check.mk (vc_exe_in_TESTS): Don't @-hide commands. Use $(AM_V_GEN) instead.
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-12-14tests: default to /tmp as the temporary directoryPaul Eggert
* tests/check.mk (TESTS_ENVIRONMENT): Default TMPDIR to /tmp, rather than to the working directory; this is more common in practice, which makes the tests more real-worldish; and it is often faster. Also, it avoids some problems with NFS cleanups. * tests/misc/sort-compress: Remove unnecessary code setting TMPDIR. * tests/misc/sort-compress-proc: Likewise. Do the final sleep only if TMPDIR is relative, which should be rarely given the change to TESTS_ENVIRONMENT.
2010-04-07tests: add a PATH-sanity-check to help-versionJim Meyering
* tests/misc/help-version: Sync from gzip's version. * tests/check.mk (TESTS_ENVIRONMENT): Export VERSION, as required for new help-version test.
2010-02-01maint: use $(CONFIG_INCLUDE) rather than the hardcoding lib/config.hPádraig Brady
* tests/check.mk (TESTS_ENVIRONMENT): Use the generated CONFIG_INCLUDE variable. Note $(abs_builddir)/$(CONFIG_HEADER) also currently works, but $(CONFIG_HEADER) is deprecated and may not be generated in future. $(CONFIG_INCLUDE) was made available by gnulib in commit, 22970f8a, "syntax-check: detect incorrect boolean macro values in config.h"
2010-01-12maint: fix tests on solaris by using /usr/xpg4/binPádraig Brady
* tests/check.mk: Prepend /usr/xpg4/bin to the $PATH if present. Using the more standard utilities allows tests such as misc/printenv, which uses the -E option to grep, to complete.
2010-01-01maint: update all FSF copyright year lists to include 2010Jim Meyering
Use this command: git ls-files | grep -v COPYING \ | xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \ build-aux/update-copyright
2009-12-11tests: use a slightly better CU_TEST_NAME settingJim Meyering
* tests/check.mk (CU_TEST_NAME): Better test names.
2009-03-31build: use Automake's new parallel-tests featureRalf Wildenhues
* build-aux/check.mk: Remove, not needed any more. * tests/Makefile.am (AUTOMAKE_OPTIONS): Add parallel-tests and color-tests. * tests/check.mk: Do not include build-aux/check.mk any more. (SUFFIXES, TEST_LOGS): Remove. (TESTS_ENVIRONMENT): Use $$f rather than $$tst in $PERL invocation. * gnulib-tests/Makefile.am: Do not include build-aux/check.mk. (AUTOMAKE_OPTIONS): New macro, add parallel-test and color-tests. (TEST_LOGS): Remove.
2009-03-02tests: when skipping a test, say why on screen, not just in the logJim Meyering
* tests/test-lib.sh: Redirect also to descriptor 9. Better one-line why-skip diagnostics. * tests/check.mk (TESTS_ENVIRONMENT): Redirect 9 to stderr. * tests/misc/pwd-unreadable-parent: Remove redundant "skipping..." diag.
2008-10-26tests: seq: check for today's extended long double fixJim Meyering
* tests/misc/seq-long-double: New file. Test for today's bug fix. * tests/check.mk (TESTS_ENVIRONMENT): Export CC definition. * tests/Makefile.am (TESTS): Add misc/seq-long-double. * NEWS (Bug fixes): Mention it.
2008-10-04tests: fix the install/strip-program testJim Meyering
* tests/install/strip-program: Use $PREFERABLY_POSIX_SHELL, not POSIX_SHELL. The latter may be empty, and would fail on OpenBSD 3.9. * tests/check.mk (TESTS_ENVIRONMENT): Propagate PREFERABLY_POSIX_SHELL to tests.
2008-09-29fix make variable quotation errorRalf Wildenhues
* tests/check.mk (TESTS_ENVIRONMENT): Quote shell variable $tmp__, fix expansion.
2008-09-26seq -0.1 0.1 2: print final number when locale's decimal point is ","Jim Meyering
* src/seq.c (print_numbers): Use strtold, not c_strtold to convert from just-formatted-using-asprintf string back to double, since asprintf may have used something other than "." as the decimal point. Reported by lsof@nodata.co.uk as <http://bugzilla.redhat.com/463556>. Thanks to Ondřej Vašík for discovering that the bug was locale-related. $ LC_ALL=cs_CZ.UTF-8 seq -0.1 0.1 2|grep 2.0 [Exit 1] $ seq -0.1 0.1 2|grep 2.0 2.0 * tests/check.mk (TESTS_ENVIRONMENT): Add LOCALE_FR_UTF8, for... * tests/misc/seq [locale-dec-pt]: New test for the above. * NEWS (bug fix): Mention it.
2008-09-03df: new option: --total to print grand totalsKamil Dudka
* src/df.c (add_uint_with_neg_flag): New function to add two integral values with separate negation flag. (show_dev): New parameter force_fsu to display numbers directly. Collect summary statistics on each printed device. (usage): Mention new option --total in --help. (main): Initialize summary on program start. Handle new option --total. * tests/df/total: Dummy test case for new --total option. * tests/df/total-awk: Better test case for new --total option (requires awk). * doc/coreutils.texi: Mention new parameter --total. * NEWS: Mention the change. * TODO: Removed completed task.
2008-07-10make check: accommodate stricter POSIX-conforming shellsJim Meyering
Without this, test-related variable settings were not exported to the shell_or_perl_ function when using dash or Solaris 11's /bin/sh. * tests/check.mk (TESTS_ENVIRONMENT): Use an explicit "export", so as not to rely on non-POSIX behavior of some /bin/sh (e.g., bash-based ones).
2008-06-18* tests/check.mk: Fix a typo in a comment.Jim Meyering
2008-06-14run gnulib-tests in parallelJim Meyering
* tests/Makefile.am: Define AUTOMAKE_OPTIONS, so check.mk can append. * tests/check.mk: Define SUFFIXES, so check.mk can append. * build-aux/check.mk (SUFFIXES): Append, so as not to evoke automake warning the prior definition in gnulib-tests/gnulib.mk. (AUTOMAKE_OPTIONS): Likewise. * gnulib-tests/Makefile.am (TEST_LOGS): Define. Include build-aux/check.mk
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-05-27prefer abs_srcdir over abs_top_srcdir, ...Jim Meyering
so that e.g., tests/* may refer to absolute names without hard-coding the name of the containing directory (tests/, here). * tests/check.mk (TESTS_ENVIRONMENT): Define abs_srcdir. * tests/pr/pr-tests: Use $abs_srcdir/pr not $abs_top_srcdir/tests/pr. * tests/chmod/c-option: Use $abs_srcdir, not $abs_top_srcdir/tests. * tests/cp/cp-parents: Likewise. * tests/mkdir/parents: Likewise. * tests/mkdir/perm: Likewise. * tests/mv/acl: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/hard-link-1: Likewise. * tests/mv/into-self-2: Likewise. * tests/mv/leak-fd: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/part-hardlink: Likewise. * tests/mv/part-rename: Likewise. * tests/mv/part-symlink: Likewise. * tests/mv/partition-perm: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/mv/to-symlink: Likewise. * tests/rm/one-file-system: Likewise. * tests/sample-test: Likewise.
2008-05-17tests: remove ugly /bin/sh wrapper around each perl-based test scriptJim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Save and restore TMPDIR around envvar-check, so that the few scripts that require $TMPDIR don't fail. This is also good to let a user's default TMPDIR setting be used e.g., in the search for an 'other-partition'. FIXME: this is pretty ugly. maybe undo it and find a better way. (TESTS_ENVIRONMENT): Invoke perl scripts with $(PERL), and use -T if the script requires that. Otherwise, use $(SHELL). * tests/misc/md5sum-newline: Create a file whose name contains a newline in Perl (resort to using "system", since open refuses). Fix old brokenness exposed by this change: * tests/du/files0-from: Correct test not to rely on stdin being attached to a non-tty. * tests/misc/sort (3g, 3h, 3i): Likewise: add explicit empty input file. Avoid warnings about using qw()-around-commas. * tests/rm/fail-eperm: Now that this test is run from a temporary subdirectory, adjust the full name of the "rm" program we're going to run. Change #!/bin/sh to #!/usr/bin/perl, and factor out the few lines of boilerplate code to invoke perl. Do not "require 5.00x"; a configure-time Perl test handles that * tests/dd/skip-seek: * tests/misc/base64: * tests/misc/basename: * tests/misc/cut: * tests/misc/date: * tests/misc/dircolors: * tests/misc/dirname: * tests/misc/expand: * tests/misc/expr: * tests/misc/factor: * tests/misc/fmt: * tests/misc/fold: * tests/misc/head: * tests/misc/head-elide-tail: * tests/misc/join: * tests/misc/ls-misc: * tests/misc/md5sum: * tests/misc/md5sum-newline: * tests/misc/mktemp: * tests/misc/od: * tests/misc/paste: * tests/misc/pr: * tests/misc/printf-cov: * tests/misc/seq: * tests/misc/sha1sum: * tests/misc/sha1sum-vec: * tests/misc/sha224sum: * tests/misc/sha256sum: * tests/misc/sha384sum: * tests/misc/sha512sum: * tests/misc/sort-merge: * tests/misc/stat-printf: * tests/misc/sum: * tests/misc/tac: * tests/misc/tail: * tests/misc/test: * tests/misc/test-diag: * tests/misc/tr: * tests/misc/tsort: * tests/misc/tty-eof: * tests/misc/unexpand: * tests/misc/uniq: * tests/misc/wc: * tests/misc/wc-files0-from: * tests/misc/xstrtol: * tests/mv/i-1: * tests/pr/pr-tests: * tests/rm/empty-name: * tests/rm/fail-eperm: * tests/rm/unreadable:
2008-05-16tests: allow to run Perl tests more cleanlyJim Meyering
Before this change, perl tests were run via a #!/bin/sh script in which perl was invoked via $(PERL) ... -- - <<\EOF. That made some stty tests fail due to the way stdin was usurped. * build-aux/check.mk (am__check_pre): Don't append $(SHELL) to this nominally automake-internal variable. * tests/check.mk (TESTS_ENVIRONMENT): Instead, define a shell function here, and append it to the more user-visible $(TESTS_ENVIRONMENT).
2008-05-06tests: hoist the sourcing of "lang-default"Jim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ... ... rather than in each of 100+ test scripts. * tests/chgrp/basic: * tests/chgrp/no-x: * tests/chmod/c-option: * tests/chmod/no-x: * tests/chmod/setgid: * tests/chmod/thru-dangling: * tests/chmod/umask-x: * tests/chmod/usage: * tests/chown/basic: * tests/chown/deref: * tests/chown/preserve-root: * tests/cp/abuse: * tests/cp/acl: * tests/cp/backup-is-src: * tests/cp/cp-a-selinux: * tests/cp/cp-i: * tests/cp/cp-mv-backup: * tests/cp/deref-slink: * tests/cp/fail-perm: * tests/cp/into-self: * tests/cp/link-preserve: * tests/cp/preserve-gid: * tests/cp/same-file: * tests/cp/slink-2-slink: * tests/cp/special-f: * tests/cp/symlink-slash: * tests/cp/thru-dangling: * tests/du/basic: * tests/du/hard-link: * tests/du/inacc-dest: * tests/du/long-sloop: * tests/du/no-x: * tests/install/basic-1: * tests/ln/hard-backup: * tests/ln/sf-1: * tests/ls/file-type: * tests/ls/infloop: * tests/ls/nameless-uid: * tests/ls/rt-1: * tests/ls/stat-failed: * tests/ls/symlink-slash: * tests/ls/x-option: * tests/misc/chcon: * tests/misc/chcon-fail: * tests/misc/csplit: * tests/misc/df-P: * tests/misc/groups-dash: * tests/misc/groups-version: * tests/misc/nohup: * tests/misc/printf-surprise: * tests/misc/runcon-no-reorder: * tests/misc/selinux: * tests/misc/split-a: * tests/misc/split-fail: * tests/misc/tac-continue: * tests/misc/wc-files0: * tests/mkdir/p-v: * tests/mkdir/selinux: * tests/mv/acl: * tests/mv/backup-dir: * tests/mv/backup-is-src: * tests/mv/childproof: * tests/mv/diag: * tests/mv/dir2dir: * tests/mv/dup-source: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/hard-verbose: * tests/mv/i-2: * tests/mv/i-3: * tests/mv/i-4: * tests/mv/i-5: * tests/mv/i-link-no: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/mv-special-1: * tests/mv/part-fail: * tests/mv/part-symlink: * tests/mv/partition-perm: * tests/mv/perm-1: * tests/mv/reply-no: * tests/mv/sticky-to-xpart: * tests/mv/update: * tests/rm/cycle: * tests/rm/dir-no-w: * tests/rm/dir-nonrecur: * tests/rm/fail-2eperm: * tests/rm/fail-eacces: * tests/rm/inaccessible: * tests/rm/interactive-always: * tests/rm/interactive-once: * tests/rm/isatty: * tests/rm/one-file-system: * tests/rm/r-1: * tests/rm/r-2: * tests/rm/rm1: * tests/rm/rm2: * tests/rm/rm3: * tests/rm/rm4: * tests/rm/rm5: * tests/rm/unread2: * tests/rm/v-slash: * tests/touch/fail-diag: * tests/touch/not-owner:
2008-05-06tests: hoist envvar-check so it is run for every testJim Meyering
I.e., also for Perl-based tests; not just the ones using test-lib.sh. * tests/check.mk (TESTS_ENVIRONMENT): Source envvar-check here, ... * tests/test-lib.sh: ...not here.
2008-05-06avoid problems with sign-extended "char" operand to is* functionsJim Meyering
* src/cut.c (set_fields): Apply to_uchar to isblank operands. * src/uniq.c (find_field): Likewise. * src/seq.c (scan_arg): Likewise, for isspace. * tests/misc/uniq: New file. Test for the above, but only when isspace(0240). * tests/Makefile.am (TESTS): Add misc/uniq. * configure.ac: Use gt_LOCALE_FR. * tests/check.mk (TESTS_ENVIRONMENT): Propagate LOCALE_FR to scripts. * NEWS: Mention the bug fixes. Before this patch, on FreeBSD 6: $ printf 'x y z\nx \xa0 y z\n' > in $ LC_ALL=fr_FR.UTF-8 uniq -f2 in|tr ' ' . x.y.z x. .y.z With the patch: $ LC_ALL=fr_FR.UTF-8 uniq -f2 in|tr ' ' . x.y.z This also affected many other locales: for i in $(locale -a); do test $(LC_ALL=$i ./uniq -f1 in|wc -l) = $(LC_ALL=$i uniq -f1 in|wc -l) || echo $i ; done ... en_GB.ISO8859-1 en_GB.ISO8859-15 en_GB.UTF-8 en_IE.UTF-8 en_NZ.ISO8859-1 en_NZ.ISO8859-15 en_NZ.UTF-8 en_US.ISO8859-1 en_US.ISO8859-15 en_US.UTF-8 ...
2008-04-27tests: put root-only (usually skipped) tests at the endJim Meyering
* tests/Makefile.am (TESTS): Don't list root-only tests explicitly. Instead, just use $(root_tests). * tests/check.mk (vc_exe_in_TESTS): Now that root_tests are separate, parse out the union of $(TESTS) and $(root_tests).
2008-04-24tests: do define built_programsJim Meyering
* tests/check.mk (built_programs): Define here, where it's used. This definition was in now-removed tests/misc/Makefile.am.
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-04-12tests: always enable VERBOSE output, now that test framework works betterJim Meyering
* cfg.mk: Set VERBOSE=yes. * tests/check.mk: Likewise.
2008-02-16Avoid tests/cp/acl test failure.Jim Meyering
* tests/check.mk (TESTS_ENVIRONMENT) [CONFIG_HEADER]: Define to an absolute name, so it can be used from any point in the test hierarchy. Reported by James Youngman.
2008-01-31Adapt to new version of vc-list-files.Jim Meyering
* tests/check.mk (vc_exe_in_TESTS): Adapt to new constraint that vc-list-files be run only from $(top_srcdir).
2008-01-13Remove each output redirection target before writing to it.Jim Meyering
* tests/check.mk (vc_exe_in_TESTS): Remove t1 and t2 _first_, in case they exist beforehand and are not writable. * build-aux/check.mk (am__check_pre): Likewise, remove $@-t.
2007-11-30Add quotes to protect against white space in build dir name.Ralf Wildenhues
* tests/check.mk (TESTS_ENVIRONMENT): Quote $(abs_srcdir). * tests/chmod/setgid: Quote absolute names. * tests/misc/help-version: Likewise. * tests/misc/pwd-unreadable-parent: Likewise. * tests/rmdir/ignore: Likewise. * tests/test-lib.sh: Likewise.
2007-11-16Port to Solaris 'make' and use a Posixish shell on Solaris.Jim Meyering
* bootstrap.conf (gnulib_modules): Add gnu-make, posix-shell. * build-aux/check.mk (SHELL): Set to $(PREFERABLY_POSIX_SHELL), so that commands can assume Posix syntax. (ENABLE_HARD_ERRORS, TEST_LOGS): Don't use GNU Make's "?=" syntax. (SH_E_WORKAROUND): New macro. (am__check_pre, $(TEST_SUITE_LOG)): Use it. (am__check_pre): Fail if "mkdir" fails. Use $(SHELL) rather than relying on the "#!/bin/sh" in the file, so that tests can use Posix syntax. (am__check_pre, am__tty_colors): Use $$src rather than $$<, to support the Posix-make $(TEST_LOGS) rule. (%.log: %.test, %.log: %$(EXEEXT)): Remove unused inference rules that rely on a GNU Make extension and cause Solaris 'make' to fail. (SUFFIXES): New macro, so that we can use Posix style inference rules. (%.log: %): Use this rule only if GNU_MAKE. Set $$src so that macros can use $$src rather than $$<. (CHECK-FORCE, DEPENDENCY, $(TEST_LOGS)): New macros and rules, which rely only on Posix 'make' semantics, and are used only with non-GNU 'make' implementations. $(TEST_LOGS) invokes 'make' recursively (and a bit inefficiently) to simulate the GNU 'make' rules. (.log.html): Renamed from "%.html: %.log", so that it relies only on Posix 'make' semantics. (check-clean, .PHONY): Do not depend on check-clean-local, since Solaris 'make' complains about nonexistent rules like that. * src/Makefile.am (SUFFIXES): Remove; no longer needed. (groups): Use a specific rule rather than an inference rule that is only instantiated once. The inference-rule approach does not work with Solaris 'make', which gets confused by the "groups: Makefile" line. It's not clear from the Posix spec that Solaris 'make' is buggy here, so instead of worrying about it, rewrite the makefile so that it clearly conforms to Posix. * tests/check.mk (TESTS_ENVIRONMENT): Export PACKAGE_BUGREPORT. GNU 'make' does this automatically for us, but Solaris 'make' doesn't. 2007-11-15 Paul Eggert <eggert@cs.ucla.edu>
2007-10-29Avoid test failure in non-srcdir build vs. the git tree.Jim Meyering
* tests/check.mk (vc_exe_in_TESTS): Run this test only in a srcdir build directory. Reported by Andreas Schwab.
2007-10-20Adjust tests to pass, now that Test.pm ones use check.mk.Jim Meyering
* tests/check.mk (vc_exe_in_TESTS): Adjust regexp not to match the "TESTS = $x-tests" line in each Test.pm-derived Makefile.am file. * tests/sort/main: Remove this unused file.
2007-10-14Pull all TESTS_ENVIRONMENT settings "up" into tests/check.mk.Jim Meyering
* tests/Makefile.am.in (TESTS_ENVIRONMENT): Remove definition. * tests/chgrp/Makefile.am: Likewise. * tests/chmod/Makefile.am: Likewise. * tests/chown/Makefile.am: Likewise. * tests/cp/Makefile.am: Likewise. * tests/dd/Makefile.am: Likewise. * tests/du/Makefile.am: Likewise. * tests/install/Makefile.am: Likewise. * tests/ln/Makefile.am: Likewise. * tests/ls/Makefile.am: Likewise. * tests/misc/Makefile.am: Likewise. * tests/mkdir/Makefile.am: Likewise. * tests/mv/Makefile.am: Likewise. * tests/readlink/Makefile.am: Likewise. * tests/rm/Makefile.am: Likewise. * tests/rmdir/Makefile.am: Likewise. * tests/tail-2/Makefile.am: Likewise. * tests/touch/Makefile.am: Likewise. * tests/check.mk (TESTS_ENVIRONMENT) [EXEEXT, EGREP, MAKE, PERL]: [CONFIG_HEADER, build_programs, host_os, host_triplet, PATH]: [REPLACE_GETCWD, CU_TEST_NAME]: Add definitions here. * tests/misc/pwd-long: Use $abs_top_builddir/src, not $BUILD_SRC_DIR. * tests/dd/skip-seek: Don't use $ENV{PROG}. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Likewise. * tests/mv/i-1: Likewise.
2007-10-05Add PACKAGE_VERSION to TESTS_ENVIRONMENT via check.mk.Jim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Add PACKAGE_VERSION here, rather than in every Makefile.am that needs it. * tests/rm/Makefile.am (TESTS_ENVIRONMENT): Remove PACKAGE_VERSION. * tests/misc/Makefile.am (TESTS_ENVIRONMENT): Likewise.
2007-09-22Don't print the commands of a 10-line script that's run in each subdir.Jim Meyering
* tests/check.mk (vc_exe_in_TESTS): Add a leading "@", to reduce noise.
2007-09-16tests/check.mk (vc_exe_in_TESTS): Don't rely on the value of $(TESTS),Jim Meyering
so that "make check TESTS=test-name" works once again. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-09-15Enable some previously omitted test scripts. Add a test cross-check.Jim Meyering
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable. * tests/rm/empty-name: Likewise. * tests/rm/unreadable: Reenable this test. Adjust for new rm. * tests/mkdir/Makefile.am: Add writable-under-readonly. * tests/mkdir/writable-under-readonly: Add some comments. This test is always skipped, for now. * tests/Makefile.am (ta): Hook up the new root-only script. * tests/tail-2/infloop-1: Make this test pass. * tests/tail-2/Makefile.am (TESTS): Add infloop-1. * tests/tail-2/fflush: Remove unused file. * tests/check.mk (vc_executable_is_in_TESTS): More portable. * tests/check.mk (check): Depend on the above. * build-aux/check.mk: Remove comment mentioning AUTHORS file.
2007-09-15Factor out definitions in TESTS_ENVIRONMENT of srcdir, top_srcdir, etc.Jim Meyering
tests/check.mk (top_srcdir): Define. tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir), $(abs_top_srcdir), and $(abs_top_builddir), since they're defined via the included tests/check.mk.
2007-09-15Adjust chgrp, chmod, chown, cp tests to use test-lib.sh.Jim Meyering
* tests/check.mk: Also define abs_top_builddir.
2007-09-15Parallel "make check" support.Jim Meyering
* build-aux/check.mk: New file, from The Vaucanson Group. * .x-sc_GPL_version: New file, to allow "version 2 or later" in build-aux/check.mk. * Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version. * tests/check.mk: New file. * tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh. Begin factoring "sample-test" out of test scripts. * tests/test-lib.sh: New file, to be sourced by all tests that were previously derived from the "sample-test" template. * tests/mkdtemp: New file. * tests/touch/dir-1: Use test-lib.sh. * tests/touch/empty-file: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/fifo: Likewise. * tests/touch/no-create-missing: Likewise. * tests/touch/no-rights: Likewise. Also, don't sleep. * tests/touch/not-owner: Likewise. * tests/touch/obsolescent: Likewise. * tests/touch/read-only: Likewise. * tests/touch/relative: Likewise. * tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk, to get the parallel-"make check" bits. Move a slow test into tests/misc. * tests/check.mk: Wrapper. * tests/ls/time-1: Move this file to tests/misc/ls-time. * tests/misc/ls-time: New file. From tests/ls/time-1. * tests/ls/Makefile.am (TESTS): Remove time-1. * tests/misc/Makefile.am (TESTS): Add ls-time.