| Age | Commit message (Collapse) | Author |
|---|
|
* tests/check.mk (vc_exe_in_TESTS): The main change is to
not start a sed process for each file under tests/,
which was taking around 2.5s on a 2.1GHz i3-2310M.
Also adjust the rule to no longer use temporary files.
|
|
This change implements a more correct and idiomatic use of the
features of the Automake-provided 'parallel-tests' harness.
Moreover, this change is required in order for the testsuite to
continue to work with the new testsuite harness that is planned
to be introduced in Automake 1.12 (which, as of the writing date,
is still under development and in alpha state).
* tests/shell-or-perl: New auxiliary script.
* tests/Makefile.am (EXTRA_DIST): Distribute it.
* tests/check.mk (TESTS_ENVIRONMENT): Remove definition of the
`shell_or_perl_' shell function, whose code has been moved in
the new script above (with a few improvements and extensions).
Do not use it to run the test scripts.
(LOG_COMPILER): New, properly invoking `shell-or-perl'.
|
|
Running "make check" normally prints a diagnostic to the outermost
stderr (usually a tty) to explain why a test is skipped. It did this
by redirecting FD 9 to stderr (via "exec 9>&2") before invoking the
shell script. Shell scripts write skip-explanation to FD 9 via
init.sh's skip_ function. However, with ksh and HP-UX's /bin/sh,
the effects of "exec 9>&2" are canceled upon fork-and-exec, so we
would get a "Bad file number" diagnostic and no skip explanation on
those systems.
* tests/check.mk (TESTS_ENVIRONMENT): Redirect more portably, via
"$(SHELL) 9>&2", rather than the prior "exec 9>&2; $(SHELL) ..."
Actually, we use "shell_or_perl_ 9>&2", to make this effective
also for the perl-based tests.
* tests/init.sh (stderr_fileno_): Update the advice in comments.
See http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/22488
for lots of discussion. Stefano Lattarini suggested the solution
of putting "9>&2" after the command. Reported by Bruno Haible.
|
|
* tests/CuSkip.pm (skip): New file/module/function, to help
the perl test scripts "skip" a test consistently, emitting
a diagnostic both into the log file and into the outermost
stderr stream that is more likely to be seen by a human.
* tests/check.mk (TESTS_ENVIRONMENT): Add -MCuSkip.
* tests/misc/date-next-dow: Use CuSkip::skip in place of warn+exit-77.
* tests/misc/tty-eof: Likewise.
* tests/misc/uniq: Likewise.
* tests/rm/fail-eperm: Likewise.
* tests/misc/md5sum-newline: Likewise. Also, s/program_name/ME/.
* tests/misc/ls-misc (setuid_setup, main): Likewise.
* tests/misc/pwd-long: Likewise, and add -I"$abs_srcdir" -MCuSkip
to the $PERL invocation command.
Inspired by a request from Bruno Haible regarding misc/tty-eof:
http://debbugs.gnu.org/8570
|
|
* tests/check.mk (.built-programs): Run cd'd submake in a subshell
so the redirected output ends up in the current directory, not ../src.
|
|
Do not run a sub-make to set up the environment for each
and every test script. Instead, run it just once and store
the result in a file.
* tests/check.mk (built_programs): Remove definition.
(.built-programs): New rule to create the temporary file.
(CLEANFILES): Arrange to remove it.
(TESTS_ENVIRONMENT): Simply cat .built-programs, rather than
running the sub-make.
* .gitignore: Ignore it.
|
|
There was a non-negligible delay after running a single test.
Now, you'll know why when you see this test's name.
* tests/check.mk (vc_exe_in_TESTS): Don't @-hide commands.
Use $(AM_V_GEN) instead.
|
|
Run "make update-copyright".
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Default TMPDIR to /tmp,
rather than to the working directory; this is more common in
practice, which makes the tests more real-worldish; and it is
often faster. Also, it avoids some problems with NFS cleanups.
* tests/misc/sort-compress: Remove unnecessary code setting TMPDIR.
* tests/misc/sort-compress-proc: Likewise. Do the final sleep
only if TMPDIR is relative, which should be rarely given the
change to TESTS_ENVIRONMENT.
|
|
* tests/misc/help-version: Sync from gzip's version.
* tests/check.mk (TESTS_ENVIRONMENT): Export VERSION, as required
for new help-version test.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Use the generated CONFIG_INCLUDE
variable. Note $(abs_builddir)/$(CONFIG_HEADER) also currently works,
but $(CONFIG_HEADER) is deprecated and may not be generated in future.
$(CONFIG_INCLUDE) was made available by gnulib in commit, 22970f8a,
"syntax-check: detect incorrect boolean macro values in config.h"
|
|
* tests/check.mk: Prepend /usr/xpg4/bin to the $PATH if present.
Using the more standard utilities allows tests such as misc/printenv,
which uses the -E option to grep, to complete.
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
* tests/check.mk (CU_TEST_NAME): Better test names.
|
|
* build-aux/check.mk: Remove, not needed any more.
* tests/Makefile.am (AUTOMAKE_OPTIONS): Add parallel-tests and
color-tests.
* tests/check.mk: Do not include build-aux/check.mk any more.
(SUFFIXES, TEST_LOGS): Remove.
(TESTS_ENVIRONMENT): Use $$f rather than $$tst in $PERL invocation.
* gnulib-tests/Makefile.am: Do not include build-aux/check.mk.
(AUTOMAKE_OPTIONS): New macro, add parallel-test and color-tests.
(TEST_LOGS): Remove.
|
|
* tests/test-lib.sh: Redirect also to descriptor 9.
Better one-line why-skip diagnostics.
* tests/check.mk (TESTS_ENVIRONMENT): Redirect 9 to stderr.
* tests/misc/pwd-unreadable-parent: Remove redundant "skipping..." diag.
|
|
* tests/misc/seq-long-double: New file. Test for today's bug fix.
* tests/check.mk (TESTS_ENVIRONMENT): Export CC definition.
* tests/Makefile.am (TESTS): Add misc/seq-long-double.
* NEWS (Bug fixes): Mention it.
|
|
* tests/install/strip-program: Use $PREFERABLY_POSIX_SHELL,
not POSIX_SHELL. The latter may be empty, and would fail
on OpenBSD 3.9.
* tests/check.mk (TESTS_ENVIRONMENT): Propagate
PREFERABLY_POSIX_SHELL to tests.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Quote shell variable
$tmp__, fix expansion.
|
|
* src/seq.c (print_numbers): Use strtold, not c_strtold to convert
from just-formatted-using-asprintf string back to double, since
asprintf may have used something other than "." as the decimal point.
Reported by lsof@nodata.co.uk as <http://bugzilla.redhat.com/463556>.
Thanks to Ondřej Vašík for discovering that the bug was locale-related.
$ LC_ALL=cs_CZ.UTF-8 seq -0.1 0.1 2|grep 2.0
[Exit 1]
$ seq -0.1 0.1 2|grep 2.0
2.0
* tests/check.mk (TESTS_ENVIRONMENT): Add LOCALE_FR_UTF8, for...
* tests/misc/seq [locale-dec-pt]: New test for the above.
* NEWS (bug fix): Mention it.
|
|
* src/df.c (add_uint_with_neg_flag): New function to add two integral
values with separate negation flag.
(show_dev): New parameter force_fsu to display numbers directly. Collect
summary statistics on each printed device.
(usage): Mention new option --total in --help.
(main): Initialize summary on program start. Handle new option --total.
* tests/df/total: Dummy test case for new --total option.
* tests/df/total-awk: Better test case for new --total option (requires
awk).
* doc/coreutils.texi: Mention new parameter --total.
* NEWS: Mention the change.
* TODO: Removed completed task.
|
|
Without this, test-related variable settings were not exported to
the shell_or_perl_ function when using dash or Solaris 11's /bin/sh.
* tests/check.mk (TESTS_ENVIRONMENT): Use an explicit "export",
so as not to rely on non-POSIX behavior of some /bin/sh (e.g.,
bash-based ones).
|
|
|
|
* tests/Makefile.am: Define AUTOMAKE_OPTIONS, so check.mk can append.
* tests/check.mk: Define SUFFIXES, so check.mk can append.
* build-aux/check.mk (SUFFIXES): Append, so as not to evoke
automake warning the prior definition in gnulib-tests/gnulib.mk.
(AUTOMAKE_OPTIONS): Likewise.
* gnulib-tests/Makefile.am (TEST_LOGS): Define.
Include build-aux/check.mk
|
|
|
|
so that e.g., tests/* may refer to absolute names without
hard-coding the name of the containing directory (tests/, here).
* tests/check.mk (TESTS_ENVIRONMENT): Define abs_srcdir.
* tests/pr/pr-tests: Use $abs_srcdir/pr not $abs_top_srcdir/tests/pr.
* tests/chmod/c-option: Use $abs_srcdir, not $abs_top_srcdir/tests.
* tests/cp/cp-parents: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/backup-is-src: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/into-self-2: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/sample-test: Likewise.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Save and restore TMPDIR around
envvar-check, so that the few scripts that require $TMPDIR don't fail.
This is also good to let a user's default TMPDIR setting be used e.g.,
in the search for an 'other-partition'.
FIXME: this is pretty ugly. maybe undo it and find a better way.
(TESTS_ENVIRONMENT): Invoke perl scripts with $(PERL), and use -T
if the script requires that. Otherwise, use $(SHELL).
* tests/misc/md5sum-newline: Create a file whose name contains
a newline in Perl (resort to using "system", since open refuses).
Fix old brokenness exposed by this change:
* tests/du/files0-from: Correct test not to rely on stdin
being attached to a non-tty.
* tests/misc/sort (3g, 3h, 3i): Likewise: add explicit empty input file.
Avoid warnings about using qw()-around-commas.
* tests/rm/fail-eperm: Now that this test is run from a temporary
subdirectory, adjust the full name of the "rm" program we're going
to run.
Change #!/bin/sh to #!/usr/bin/perl, and factor out the few lines
of boilerplate code to invoke perl. Do not "require 5.00x";
a configure-time Perl test handles that
* tests/dd/skip-seek:
* tests/misc/base64:
* tests/misc/basename:
* tests/misc/cut:
* tests/misc/date:
* tests/misc/dircolors:
* tests/misc/dirname:
* tests/misc/expand:
* tests/misc/expr:
* tests/misc/factor:
* tests/misc/fmt:
* tests/misc/fold:
* tests/misc/head:
* tests/misc/head-elide-tail:
* tests/misc/join:
* tests/misc/ls-misc:
* tests/misc/md5sum:
* tests/misc/md5sum-newline:
* tests/misc/mktemp:
* tests/misc/od:
* tests/misc/paste:
* tests/misc/pr:
* tests/misc/printf-cov:
* tests/misc/seq:
* tests/misc/sha1sum:
* tests/misc/sha1sum-vec:
* tests/misc/sha224sum:
* tests/misc/sha256sum:
* tests/misc/sha384sum:
* tests/misc/sha512sum:
* tests/misc/sort-merge:
* tests/misc/stat-printf:
* tests/misc/sum:
* tests/misc/tac:
* tests/misc/tail:
* tests/misc/test:
* tests/misc/test-diag:
* tests/misc/tr:
* tests/misc/tsort:
* tests/misc/tty-eof:
* tests/misc/unexpand:
* tests/misc/uniq:
* tests/misc/wc:
* tests/misc/wc-files0-from:
* tests/misc/xstrtol:
* tests/mv/i-1:
* tests/pr/pr-tests:
* tests/rm/empty-name:
* tests/rm/fail-eperm:
* tests/rm/unreadable:
|
|
Before this change, perl tests were run via a #!/bin/sh script
in which perl was invoked via $(PERL) ... -- - <<\EOF.
That made some stty tests fail due to the way stdin was usurped.
* build-aux/check.mk (am__check_pre): Don't append $(SHELL) to this
nominally automake-internal variable.
* tests/check.mk (TESTS_ENVIRONMENT): Instead, define a shell function
here, and append it to the more user-visible $(TESTS_ENVIRONMENT).
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ...
... rather than in each of 100+ test scripts.
* tests/chgrp/basic:
* tests/chgrp/no-x:
* tests/chmod/c-option:
* tests/chmod/no-x:
* tests/chmod/setgid:
* tests/chmod/thru-dangling:
* tests/chmod/umask-x:
* tests/chmod/usage:
* tests/chown/basic:
* tests/chown/deref:
* tests/chown/preserve-root:
* tests/cp/abuse:
* tests/cp/acl:
* tests/cp/backup-is-src:
* tests/cp/cp-a-selinux:
* tests/cp/cp-i:
* tests/cp/cp-mv-backup:
* tests/cp/deref-slink:
* tests/cp/fail-perm:
* tests/cp/into-self:
* tests/cp/link-preserve:
* tests/cp/preserve-gid:
* tests/cp/same-file:
* tests/cp/slink-2-slink:
* tests/cp/special-f:
* tests/cp/symlink-slash:
* tests/cp/thru-dangling:
* tests/du/basic:
* tests/du/hard-link:
* tests/du/inacc-dest:
* tests/du/long-sloop:
* tests/du/no-x:
* tests/install/basic-1:
* tests/ln/hard-backup:
* tests/ln/sf-1:
* tests/ls/file-type:
* tests/ls/infloop:
* tests/ls/nameless-uid:
* tests/ls/rt-1:
* tests/ls/stat-failed:
* tests/ls/symlink-slash:
* tests/ls/x-option:
* tests/misc/chcon:
* tests/misc/chcon-fail:
* tests/misc/csplit:
* tests/misc/df-P:
* tests/misc/groups-dash:
* tests/misc/groups-version:
* tests/misc/nohup:
* tests/misc/printf-surprise:
* tests/misc/runcon-no-reorder:
* tests/misc/selinux:
* tests/misc/split-a:
* tests/misc/split-fail:
* tests/misc/tac-continue:
* tests/misc/wc-files0:
* tests/mkdir/p-v:
* tests/mkdir/selinux:
* tests/mv/acl:
* tests/mv/backup-dir:
* tests/mv/backup-is-src:
* tests/mv/childproof:
* tests/mv/diag:
* tests/mv/dir2dir:
* tests/mv/dup-source:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/hard-verbose:
* tests/mv/i-2:
* tests/mv/i-3:
* tests/mv/i-4:
* tests/mv/i-5:
* tests/mv/i-link-no:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/mv-special-1:
* tests/mv/part-fail:
* tests/mv/part-symlink:
* tests/mv/partition-perm:
* tests/mv/perm-1:
* tests/mv/reply-no:
* tests/mv/sticky-to-xpart:
* tests/mv/update:
* tests/rm/cycle:
* tests/rm/dir-no-w:
* tests/rm/dir-nonrecur:
* tests/rm/fail-2eperm:
* tests/rm/fail-eacces:
* tests/rm/inaccessible:
* tests/rm/interactive-always:
* tests/rm/interactive-once:
* tests/rm/isatty:
* tests/rm/one-file-system:
* tests/rm/r-1:
* tests/rm/r-2:
* tests/rm/rm1:
* tests/rm/rm2:
* tests/rm/rm3:
* tests/rm/rm4:
* tests/rm/rm5:
* tests/rm/unread2:
* tests/rm/v-slash:
* tests/touch/fail-diag:
* tests/touch/not-owner:
|
|
I.e., also for Perl-based tests; not just the ones using test-lib.sh.
* tests/check.mk (TESTS_ENVIRONMENT): Source envvar-check here, ...
* tests/test-lib.sh: ...not here.
|
|
* src/cut.c (set_fields): Apply to_uchar to isblank operands.
* src/uniq.c (find_field): Likewise.
* src/seq.c (scan_arg): Likewise, for isspace.
* tests/misc/uniq: New file. Test for the above, but only
when isspace(0240).
* tests/Makefile.am (TESTS): Add misc/uniq.
* configure.ac: Use gt_LOCALE_FR.
* tests/check.mk (TESTS_ENVIRONMENT): Propagate LOCALE_FR to scripts.
* NEWS: Mention the bug fixes.
Before this patch, on FreeBSD 6:
$ printf 'x y z\nx \xa0 y z\n' > in
$ LC_ALL=fr_FR.UTF-8 uniq -f2 in|tr ' ' .
x.y.z
x. .y.z
With the patch:
$ LC_ALL=fr_FR.UTF-8 uniq -f2 in|tr ' ' .
x.y.z
This also affected many other locales:
for i in $(locale -a); do test $(LC_ALL=$i ./uniq -f1 in|wc -l)
= $(LC_ALL=$i uniq -f1 in|wc -l) || echo $i ; done
...
en_GB.ISO8859-1
en_GB.ISO8859-15
en_GB.UTF-8
en_IE.UTF-8
en_NZ.ISO8859-1
en_NZ.ISO8859-15
en_NZ.UTF-8
en_US.ISO8859-1
en_US.ISO8859-15
en_US.UTF-8
...
|
|
* tests/Makefile.am (TESTS): Don't list root-only tests explicitly.
Instead, just use $(root_tests).
* tests/check.mk (vc_exe_in_TESTS): Now that root_tests are separate,
parse out the union of $(TESTS) and $(root_tests).
|
|
* tests/check.mk (built_programs): Define here, where it's used.
This definition was in now-removed tests/misc/Makefile.am.
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
* cfg.mk: Set VERBOSE=yes.
* tests/check.mk: Likewise.
|
|
* tests/check.mk (TESTS_ENVIRONMENT) [CONFIG_HEADER]: Define
to an absolute name, so it can be used from any point in the
test hierarchy. Reported by James Youngman.
|
|
* tests/check.mk (vc_exe_in_TESTS): Adapt to new constraint
that vc-list-files be run only from $(top_srcdir).
|
|
* tests/check.mk (vc_exe_in_TESTS): Remove t1 and t2 _first_,
in case they exist beforehand and are not writable.
* build-aux/check.mk (am__check_pre): Likewise, remove $@-t.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Quote $(abs_srcdir).
* tests/chmod/setgid: Quote absolute names.
* tests/misc/help-version: Likewise.
* tests/misc/pwd-unreadable-parent: Likewise.
* tests/rmdir/ignore: Likewise.
* tests/test-lib.sh: Likewise.
|
|
* bootstrap.conf (gnulib_modules): Add gnu-make, posix-shell.
* build-aux/check.mk (SHELL): Set to $(PREFERABLY_POSIX_SHELL),
so that commands can assume Posix syntax.
(ENABLE_HARD_ERRORS, TEST_LOGS): Don't use GNU Make's "?=" syntax.
(SH_E_WORKAROUND): New macro.
(am__check_pre, $(TEST_SUITE_LOG)): Use it.
(am__check_pre): Fail if "mkdir" fails. Use $(SHELL)
rather than relying on the "#!/bin/sh" in the file, so that tests
can use Posix syntax.
(am__check_pre, am__tty_colors): Use $$src rather than $$<, to
support the Posix-make $(TEST_LOGS) rule.
(%.log: %.test, %.log: %$(EXEEXT)): Remove unused inference rules
that rely on a GNU Make extension and cause Solaris 'make' to fail.
(SUFFIXES): New macro, so that we can use Posix style inference rules.
(%.log: %): Use this rule only if GNU_MAKE.
Set $$src so that macros can use $$src rather than $$<.
(CHECK-FORCE, DEPENDENCY, $(TEST_LOGS)): New macros and rules,
which rely only on Posix 'make' semantics, and are used only with
non-GNU 'make' implementations. $(TEST_LOGS) invokes 'make'
recursively (and a bit inefficiently) to simulate the GNU 'make'
rules.
(.log.html): Renamed from "%.html: %.log", so that it relies only
on Posix 'make' semantics.
(check-clean, .PHONY): Do not depend on check-clean-local, since
Solaris 'make' complains about nonexistent rules like that.
* src/Makefile.am (SUFFIXES): Remove; no longer needed.
(groups): Use a specific rule rather than an inference rule that
is only instantiated once. The inference-rule approach does not
work with Solaris 'make', which gets confused by the "groups:
Makefile" line. It's not clear from the Posix spec that Solaris
'make' is buggy here, so instead of worrying about it, rewrite
the makefile so that it clearly conforms to Posix.
* tests/check.mk (TESTS_ENVIRONMENT): Export PACKAGE_BUGREPORT.
GNU 'make' does this automatically for us, but Solaris 'make'
doesn't.
2007-11-15 Paul Eggert <eggert@cs.ucla.edu>
|
|
* tests/check.mk (vc_exe_in_TESTS): Run this test only in a
srcdir build directory. Reported by Andreas Schwab.
|
|
* tests/check.mk (vc_exe_in_TESTS): Adjust regexp not to match the
"TESTS = $x-tests" line in each Test.pm-derived Makefile.am file.
* tests/sort/main: Remove this unused file.
|
|
* tests/Makefile.am.in (TESTS_ENVIRONMENT): Remove definition.
* tests/chgrp/Makefile.am: Likewise.
* tests/chmod/Makefile.am: Likewise.
* tests/chown/Makefile.am: Likewise.
* tests/cp/Makefile.am: Likewise.
* tests/dd/Makefile.am: Likewise.
* tests/du/Makefile.am: Likewise.
* tests/install/Makefile.am: Likewise.
* tests/ln/Makefile.am: Likewise.
* tests/ls/Makefile.am: Likewise.
* tests/misc/Makefile.am: Likewise.
* tests/mkdir/Makefile.am: Likewise.
* tests/mv/Makefile.am: Likewise.
* tests/readlink/Makefile.am: Likewise.
* tests/rm/Makefile.am: Likewise.
* tests/rmdir/Makefile.am: Likewise.
* tests/tail-2/Makefile.am: Likewise.
* tests/touch/Makefile.am: Likewise.
* tests/check.mk (TESTS_ENVIRONMENT) [EXEEXT, EGREP, MAKE, PERL]:
[CONFIG_HEADER, build_programs, host_os, host_triplet, PATH]:
[REPLACE_GETCWD, CU_TEST_NAME]: Add definitions here.
* tests/misc/pwd-long: Use $abs_top_builddir/src, not $BUILD_SRC_DIR.
* tests/dd/skip-seek: Don't use $ENV{PROG}.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Likewise.
* tests/mv/i-1: Likewise.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Add PACKAGE_VERSION here,
rather than in every Makefile.am that needs it.
* tests/rm/Makefile.am (TESTS_ENVIRONMENT): Remove PACKAGE_VERSION.
* tests/misc/Makefile.am (TESTS_ENVIRONMENT): Likewise.
|
|
* tests/check.mk (vc_exe_in_TESTS): Add a leading "@", to reduce noise.
|
|
so that "make check TESTS=test-name" works once again.
Signed-off-by: Jim Meyering <jim@meyering.net>
|
|
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Reenable this test. Adjust for new rm.
* tests/mkdir/Makefile.am: Add writable-under-readonly.
* tests/mkdir/writable-under-readonly: Add some comments.
This test is always skipped, for now.
* tests/Makefile.am (ta): Hook up the new root-only script.
* tests/tail-2/infloop-1: Make this test pass.
* tests/tail-2/Makefile.am (TESTS): Add infloop-1.
* tests/tail-2/fflush: Remove unused file.
* tests/check.mk (vc_executable_is_in_TESTS): More portable.
* tests/check.mk (check): Depend on the above.
* build-aux/check.mk: Remove comment mentioning AUTHORS file.
|
|
tests/check.mk (top_srcdir): Define.
tests/*/Makefile.am: Remove definitions of $(srcdir), $(top_srcdir),
$(abs_top_srcdir), and $(abs_top_builddir), since they're
defined via the included tests/check.mk.
|
|
* tests/check.mk: Also define abs_top_builddir.
|
|
* build-aux/check.mk: New file, from The Vaucanson Group.
* .x-sc_GPL_version: New file, to allow "version 2 or later"
in build-aux/check.mk.
* Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version.
* tests/check.mk: New file.
* tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh.
Begin factoring "sample-test" out of test scripts.
* tests/test-lib.sh: New file, to be sourced by all tests that
were previously derived from the "sample-test" template.
* tests/mkdtemp: New file.
* tests/touch/dir-1: Use test-lib.sh.
* tests/touch/empty-file: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/no-rights: Likewise. Also, don't sleep.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
* tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk,
to get the parallel-"make check" bits.
Move a slow test into tests/misc.
* tests/check.mk: Wrapper.
* tests/ls/time-1: Move this file to tests/misc/ls-time.
* tests/misc/ls-time: New file. From tests/ls/time-1.
* tests/ls/Makefile.am (TESTS): Remove time-1.
* tests/misc/Makefile.am (TESTS): Add ls-time.
|
