| Age | Commit message (Collapse) | Author |
|---|
|
* tests/misc/Makefile.am (TESTS): Reorder.
* tests/Makefile.am (SUBDIRS): Reorder.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
* tests/help-version: Move to...
* tests/misc/help-version: ...here.
Source test-lib.sh, as usual.
Use $abs_top_builddir, rather than ".." and "../..".
|
|
* tests/test-lib.sh (require_selinux_): New function.
* tests/misc/chcon: Use it.
* tests/misc/selinux: Use it here, too.
* tests/cp/cp-a-selinux: and here.
* tests/selinux: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove selinux.
Reported by Mike Frysinger and Bauke Jan Douma.
|
|
A cross-partition move of a file in a sticky tmpdir and owned by
another user would evoke an invalid diagnostic after copying it:
mv: cannot remove `x': Operation not permitted
Either of the following (mv.c, remove.c) changes would fix the bug by
itself. I think it's slightly better to use both; the added cost is
minimal: mv: an extra lstat-per-mv-cmdline-arg-that-goes-cross-partition,
rm: an extra lstat-per-unlink-that-fails-w/EPERM.
* src/remove.c (remove_entry): Also lstat the file upon EPERM.
* src/mv.c (rm_option_init): Initialize root_dev_ino just as is done
in rm, so that a cross-partition invoked remove.c:rm call works the
same way as one invoked from the command-line use of "rm". That
setting of root_dev_ino makes rm() do the equivalent of an additional
lstat for each argument, which in turn gives rm enough information to
issue the right diagnostic.
* tests/mv/sticky-to-xpart (version): New file. Test for the above.
* tests/mv/Makefile.am (TESTS): Add sticky-to-xpart.
Arrange for "make check-root" to run the new root-only test.
* tests/Makefile.am (tb): New target, to run the new root-only test.
(all_t): Add tb.
* src/c99-to-c89.diff: Adjust offsets.
|
|
* tests/rm/Makefile.am (TESTS): Add empty-name and unreadable.
* tests/rm/empty-name: Likewise.
* tests/rm/unreadable: Reenable this test. Adjust for new rm.
* tests/mkdir/Makefile.am: Add writable-under-readonly.
* tests/mkdir/writable-under-readonly: Add some comments.
This test is always skipped, for now.
* tests/Makefile.am (ta): Hook up the new root-only script.
* tests/tail-2/infloop-1: Make this test pass.
* tests/tail-2/Makefile.am (TESTS): Add infloop-1.
* tests/tail-2/fflush: Remove unused file.
* tests/check.mk (vc_executable_is_in_TESTS): More portable.
* tests/check.mk (check): Depend on the above.
* build-aux/check.mk: Remove comment mentioning AUTHORS file.
|
|
* tests/ls-2/basic-1: Move this file to ...
* tests/misc/ls-misc: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add ls-misc.
* tests/Makefile.am (SUBDIRS): Remove ls-2.
* tests/ls-2: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/ls-2/Makefile.
|
|
Reflect these renamings:
od/od-N misc/od-N
od/x8 misc/od-x8
sha1sum/basic-1 misc/sha1sum
sha1sum/sample-vec misc/sha1sum-vec
shred/exact misc/shred-exact
shred/remove misc/shred-remove
stty/basic-1 misc/stty
stty/invalid misc/stty-invalid
stty/row-col-1 misc/stty-row-col
* tests/misc/Makefile.am (TESTS): Add the new files.
* tests/Makefile.am (SUBDIRS): Remove the dir names.
* tests/od, tests/sha1sum, tests/shred, tests/stty: Remove the directories.
* configure.ac (AC_CONFIG_FILES): Remove the corresponding Makefile names.
|
|
* tests/tee/basic: Move this file to ...
* tests/misc/tee: ...here. Don't rely on $PROG in env.
* tests/tee/dash: Move this file to ...
* tests/misc/tee-dash: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add tee.
* tests/Makefile.am (SUBDIRS): Remove tee.
* tests/tee: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/tee/Makefile
|
|
* tests/sum/basic-1: Move this file to ...
* tests/misc/sum: ...here. Don't rely on $PROG in env.
* tests/sum/sysv: Move this file to ...
* tests/misc/sum-sysv: ...here. Adapt it to use test-lib.sh.
* tests/misc/Makefile.am (TESTS): Add sum and sum-sysv.
* tests/Makefile.am (SUBDIRS): Remove sum.
* tests/sum: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/sum/Makefile.
|
|
* tests/tsort/basic-1: Move this file to ...
* tests/misc/tsort: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add tsort.
* tests/Makefile.am (SUBDIRS): Remove tsort.
* tests/tsort: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/tsort/Makefile.
|
|
* tests/unexpand/basic-1: Move this file to ...
* tests/misc/unexpand: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add unexpand.
* tests/Makefile.am (SUBDIRS): Remove unexpand.
* tests/unexpand: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/unexpand/Makefile.
|
|
* tests/seq/basic: Move this file to ...
* tests/misc/seq: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add seq.
* tests/Makefile.am (SUBDIRS): Remove seq.
* tests/seq: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/seq/Makefile
|
|
* tests/md5sum/basic-1: Move this file to ...
* tests/misc/md5sum: ...here. Don't rely on $PROG in env.
* tests/md5sum/newline-1: Move this file to ...
* tests/misc/md5sum-newline: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add md5sum.
* tests/Makefile.am (SUBDIRS): Remove md5sum.
* tests/md5sum: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/md5sum/Makefile
|
|
* tests/fmt/basic: Move this file to ...
* tests/misc/fmt: ...here. Don't rely on $PROG in env.
* tests/fmt/long-line: Move this file to ...
* tests/misc/fmt-long-line: ...here.
* tests/misc/Makefile.am (TESTS): Add fmt.
* tests/Makefile.am (SUBDIRS): Remove fmt.
* tests/fmt: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/fmt/Makefile
|
|
* tests/factor/basic: Move this file to ...
* tests/misc/factor: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add factor.
* tests/Makefile.am (SUBDIRS): Remove factor.
* tests/factor: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/factor/Makefile
|
|
* tests/expr/basic: Move this file to ...
* tests/misc/expr: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add expr.
* tests/Makefile.am (SUBDIRS): Remove expr.
* tests/expr: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/expr/Makefile
|
|
* tests/dircolors/simple: Move this file to...
* tests/misc/dircolors: ...here. Don't rely on $PROG in env.
* tests/misc/Makefile.am (TESTS): Add dircolors.
* tests/Makefile.am (SUBDIRS): Remove dircolors.
* tests/dircolors: Remove the directory.
* configure.ac (AC_CONFIG_FILES): Remove tests/dircolors/Makefile
|
|
* build-aux/check.mk: New file, from The Vaucanson Group.
* .x-sc_GPL_version: New file, to allow "version 2 or later"
in build-aux/check.mk.
* Makefile.am (EXTRA_DIST): Add .x-sc_GPL_version.
* tests/check.mk: New file.
* tests/Makefile.am (EXTRA_DIST): Add check.mk, mkdtemp and test-lib.sh.
Begin factoring "sample-test" out of test scripts.
* tests/test-lib.sh: New file, to be sourced by all tests that
were previously derived from the "sample-test" template.
* tests/mkdtemp: New file.
* tests/touch/dir-1: Use test-lib.sh.
* tests/touch/empty-file: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/fifo: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/no-rights: Likewise. Also, don't sleep.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
* tests/touch/Makefile.am: Include $(top_srcdir)/tests/check.mk,
to get the parallel-"make check" bits.
Move a slow test into tests/misc.
* tests/check.mk: Wrapper.
* tests/ls/time-1: Move this file to tests/misc/ls-time.
* tests/misc/ls-time: New file. From tests/ls/time-1.
* tests/ls/Makefile.am (TESTS): Remove time-1.
* tests/misc/Makefile.am (TESTS): Add ls-time.
|
|
* tests/CuTmpdir.pm: New file.
* tests/Makefile.am (EXTRA_DIST): Add CuTmpdir.pm.
* tests/misc/od, tests/misc/base64, tests/misc/basename:
* tests/misc/cut, tests/misc/date, tests/misc/dirname:
* tests/misc/expand, tests/misc/fold, tests/misc/head-elide-tail:
* tests/misc/paste-no-nl, tests/misc/pr, tests/misc/sha224sum:
* tests/misc/sha256sum, tests/misc/sha384sum, tests/misc/sha512sum:
* tests/misc/sort-merge, tests/misc/stat-printf, tests/misc/test-diag:
* tests/misc/wc-files0-from, tests/misc/xstrtol:
* tests/dd/skip-seek, tests/dircolors/simple, tests/du/files0-from:
* tests/expr/basic, tests/factor/basic, tests/fmt/basic:
* tests/ls-2/tests, tests/md5sum/basic-1, tests/md5sum/newline-1:
* tests/seq/basic, tests/sha1sum/basic-1, tests/sha1sum/sample-vec:
* tests/sum/basic-1, tests/tsort/basic-1, tests/unexpand/basic-1:
* tests/mv/i-1, tests/rm/empty-name, tests/rm/unreadable: Use it.
* tests/misc/test-diag: Use "$ENV{abs_top_builddir}/src/test",
not "../../src/test", so it works when run from a subdirectory.
* tests/ls-2/tests: Create temp files and dirs from within the perl
script, so that they're removed, when run from a subdirectory.
|
|
has a color.
* src/ls.c (main): Don't set check_symlink_color when C_EXEC is
colored, unless ln=target (aka color_symlink_as_referent) is set.
(gobble_file): Set f->linkok = true also when !check_symlink_color.
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/10608/focus=10927
Reported by Jeremy Maitin-Shepard.
* tests/strace: New file, contents extracted from...
* tests/mv/atomic: ...here. Source strace.
* tests/ls/stat-free-symlinks: New file. Test for the above.
Use strace to ensure that in this corner case, ls does not call stat.
* tests/ls/Makefile.am (TESTS): Add stat-free-symlinks.
* tests/Makefile.am (EXTRA_DIST): Add strace.
|
|
* tests/misc/Makefile.am (built_programs): Define.
(TESTS_ENVIRONMENT): Add $(built_programs), for...
* tests/misc/arch: ...this: skip the test if arch is not built.
* src/Makefile.am (built_programs.list): New rule.
* tests/Makefile.am (built_programs): Rename from all_programs.
(TESTS_ENVIRONMENT): Use built_programs, not all_programs.
* tests/help-version: Likewise.
* NEWS: Mention that using --enable-no-install-program=X may
cause "make check" to fail.
Signed-off-by: Jim Meyering <jim@meyering.net>
|
|
* tests/Makefile.am (t9): New target, to run tests/cp/cp-a-selinux.
(all_t): Add t9.
Use a directory on a loopback device mounted with -o context=...
* tests/cp/cp-a-selinux: Since this test now runs mount and umount,
it is a root-only one.
|
|
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux.
* tests/selinux: New file.
* tests/Makefile.am (EXTRA_DIST): Add selinux.
* tests/misc/selinux: Source the new script, rather than open coding it.
Change how "cp -a" and "cp --preserve=context" work with SELinux.
Now, cp -a attempts to preserve context, but failure to do so does
not change cp's exit status. However "cp --preserve=context" is
similar, but failure *does* cause cp to exit with nonzero status.
* src/copy.h (struct cp_options) [require_preserve_context]: New member.
* src/copy.c (copy_reg, copy_internal): Implement the above.
* src/mv.c (cp_option_init): Initialize the new member.
* src/install.c (cp_option_init): Likewise.
* src/cp.c (cp_option_init): Likewise.
(decode_preserve_arg): Set it or reset it.
FIXME: add an on-writable-NFS-only test
|
|
I started with the patches from Red Hat.
The entries below tell how the code evolved.
* src/ls.c (print_long_format, print_file_name_and_frills): When
there is no security context (due to getfilecon/lgetfilecon failing
with e.g. ENOTSUP), print it as "?", not "".
* src/ls.c (print_file_name_and_frills): Make -Z work without -l.
(length_of_file_name_and_frills): Likewise.
* src/ls.c: Remove the --lcontext and --scontext options.
Change the way -Z, --context work so that it no longer implies -l.
Thus, -Z -l will work like -lcontext and -Z without -l will work
like --scontext.
Adjust tests to reflect new 'ls -l' syntax -- affects only
systems with SELinux when operating on a file with no ACL.
These tests assumed that everything before the first space on
each line is the 10-byte mode string. But there may also be a "+"
in the 11th column, just before the space. However, note that this
is not new. The same thing would have happened even without the
change below, when listing a file with an ACL.
* tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm:
* tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod:
* tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm:
Don't make compilation depend on USE_ACL. An SELinux security
context counts as an "alternate access control method", so ls
must output a "+" for each file with a security context.
* src/ls.c [struct fileinfo] (have_acl): Declare unconditionally.
(FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly.
(gobble_file): Record whether a file has a security context, and
update the condition used to determine whether to print the "+".
(gobble_file): Call getfilecon/lgetfilecon also when
format == long_format, so that we get the "+".
* src/ls.c (gobble_file): Add a comment explaining why (with a
security context option) ls doesn't exit nonzero due to e.g.,
getfilecon failing with errno == ENOTSUP.
* src/ls.c (gobble_file): Ignore failure of getfilecon if it's due
to ENOTSUP.
* src/ls.c (gobble_file): Factor out three small blocks using
getfilecon and lgetfilecon.
Don't ignore return value from getfilecon and lgetfilecon.
* src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C
ternary operator).
(print_scontext_format): Likewise.
(print_scontext): Declare to be "bool", not int. Adjust uses.
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX).
* tests/misc/chcon: New file.
* tests/misc/chcon-fail: New file.
* tests/Makefile.am (check-root): Run new, root-only misc/chcon test.
* tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail.
* tests/misc/Makefile.am (TESTS): Add selinux.
* tests/misc/selinux: New file.
* tests/help-version: Skip chcon.
|
|
* Transform all Makefile.am files so that when running "make check",
CU_TEST_NAME is set to the name of the test. This is so that when I
run valgrind-enabled (--log-file-qualifier=CU_TEST_NAME) "make check"
on the entire package it is more convenient to map a leak or error
found in a valgrind log file back to the offending test.
Use this command:
(echo tests/Makefile.am.in; find tests -name Makefile.am) \
|xargs perl -pi -e '/^(\s*)PATH=...VG_PATH_PREFIX/ and ' \
-e 'print $1,q|CU_TEST_NAME=`basename $(abs_srcdir)`,$$tst |,"\\\n"'
|
|
* tests/Makefile.am (t7): New target, to run tests/ls/nameless-uid.
(all_t): Add t7.
|
|
Suggested by Steve McIntyre in <http://bugs.debian.org/392925>.
* src/remove.h (struct rm_options) [one_file_system]: New member.
* src/rm.c (rm_option_init): Initialize it.
(usage): Document the option.
* src/mv.c (rm_option_init): Likewise.
* src/remove.c (remove_dir): With --one-file-system and --recursive,
for each directory command line argument, do not affect a file system
different from that of the starting directory. And give a diagnostic.
* src/rm.c (ONE_FILE_SYSTEM): New enum.
(main): Handle new option.
* tests/rm/one-file-system: Test the above.
* tests/rm/Makefile.am (TESTS): Add one-file-system.
* tests/Makefile.am (check-root): Add the rm/one-file-system
test to the list.
(EXTRA_DIST): Add other-fs-tmpdir.
* tests/mv/setup: Removed. Renamed to...
* tests/other-fs-tmpdir: ...this new file.
* tests/mv/Makefile.am (EXTRA_DIST): Remove setup.
* tests/mv/acl: Reflect renaming: use ../other-fs-tmpdir.
* tests/mv/backup-is-src: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/mv/into-self-2: Likewise.
[doc/ChangeLog]
* coreutils.texi (rm invocation): Describe --one-file-system.
|
|
* tests/Makefile.am (t1 t2 t3 t4 t5): New targets.
(check-root): Depend on them, rather than executing the five
commands in a single rule. Reported by Greg Schafer.
|
|
|
|
Add $VG_PATH_PREFIX as a prefix to $PATH
|
|
* tests/Makefile.am (evar-check): Remove rule.
(EXTRA_DIST): Remove .env-warn.
* tests/.env-warn: Remove file. No longer used.
Suggestion from Eric Blake.
|
|
|
|
|
|
addition of new directories under tests/.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* src/Makefile.am (all_programs.list): New rule, copied from
man/Makefile.am and tests/Makefile.am, except that we use the
system tr rather than ./tr and we don't use tr -s.
* tests/Makefile.am (all_programs): Use it.
|
|
remnant) from PATH component. That would cause tests in this directory
not to run the just-built binaries, but rather whatever happened
to be in one's PATH. Reported by Christian Krackowizer.
|
|
|
|
|
|
of `fmt -1'. Using the just-built tr is a little cleaner.
Christian Krackowizer reported that HPUX 10.20 doesn't have fmt.
|
|
(all_programs): Use it.
|
|
the tests in help-version will use the just-built binaries.
|
