Age | Commit message (Collapse) | Author |
|
* doc/coreutils.texi (uniq invocation): Fix the description of
problematic input to say "blank lines" rather than "two or more
blank lines".
(tr invocation): Clarify that -s only works with SET1 when
not translating (when SET2 not specified). Also explicitly
state in examples where blank lines are deleted.
Also add "deleting" to the menu item.
* src/tr.c (usage): Improve the -s summary to say it always
operates on the last specified SET.
|
|
fallocate can allocate extents beyond EOF via FALLOC_FL_KEEP_SIZE.
Where there is a gap (hole) between the extents, and EOF is within
that gap, the final hole wasn't reproduced, resulting in silent
data corruption in the copied file (size too small).
* src/copy.c (extent_copy): Ensure we don't process extents
beyond the apparent file size, since processing and allocating
those is not currently supported.
* tests/cp/fiemap-extents.sh: Renamed from tests/cp/fiemap-empty.sh
and re-enable parts checking the extents at and beyond EOF.
* tests/local.mk: Reference the renamed test.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/21790
|
|
* src/md5sum.c (digest_check): Update a matched_checksums bool upon
matched checksum, and fail (loudly unless --status is specified)
if there were no matches. Also change properly_formatted_lines
to a bool while at it since we don't need to track the plurality.
* tests/misc/md5sum.pl: Add a test case.
Suggested by Jim Meyering.
|
|
* doc/coreutils.texi (md5sum invocation): Document the new option.
* src/md5sum.c (digest_file): Return an empty digest to indicate
a missing file.
(digest_check): Don't fail or output status given an empty checksum.
(usage): Document the new option.
(main): Process and validate the new option.
* tests/misc/md5sum.pl: Add new test cases.
* NEWS: Mention the new feature.
Fixes http://bugs.gnu.org/15604
|
|
* src/local.mk: Run `mkdir -p src` in all our explicit rules,
as in a VPATH build the src/ dir is only created at configure time
as a side effect of dependency tracking generation.
|
|
* src/c99-to-c89.diff: Remove file.
* src/local.mk (EXTRA_DIST): Remove it from this list.
* README (Pre-C99 build failure): Update section.
|
|
discussed in:
http://lists.gnu.org/archive/html/coreutils/2015-10/msg00091.html
* src/csplit.c: (save_line_to_file): check fwrite failures, report
and exit immediately instead of deferring to 'close_output'.
* tests/misc/csplit-io-err.sh: test fwrite failure using LD_PRELOAD.
* tests/local.mk: add new test.
|
|
* src/stat.c (human_fstype): Add new file system ID definitions.
* NEWS: Mention the improvement.
|
|
* src/paste.c (main): Use our styled wrapper for quotearg_colon().
* cfg.mk (sc_prohibit-quotearg): A new syntax check to avoid
future uses of unstyled quotearg to one of the internal slots,
and thus destined for diagnostic output.
|
|
* src/paste.c (main): Setting the quoting style to "escape"
went against the intent of the comment about presenting
doubled backslashes to the user. Instead use "c-maybe"
which is the only mode which avoids doubled backslashes,
and provides protection against arbitrary control characters.
* tests/misc/paste.pl: Adjust accordingly.
|
|
* src/ls.c (decode_switches): Set "shell-escape" if isatty().
* doc/coreutils.texi (ls invocation): Update the defaults description.
* NEWS: Mention the change in behavior. It should not have
backwards compat issues, but mentioning here just in case.
|
|
* src/printf.c (usage): Mention the new format.
(print_formatted): Handle the quoting by calling
out to the quotearg module with "shell-escape" mode.
* doc/coreutils.texi (printf invocation): Document %q.
* tests/misc/printf-quote.sh: New test.
* tests/local.mk: Reference new test.
* NEWS: Mention the new feature.
|
|
This is mainly noticeable when the multi-byte code
within ls.c is triggered by multi-byte quotes.
$ seq 200000 | xargs touch
$ time ls-old -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.483s
$ time ls-new -U --quoting=locale --hide-control-chars >/dev/null
real 0m0.430s
* src/ls.c (quote_name): Avoid rescanning the output looking for
unprintable chars when we know the quoting mode already escapes them.
* tests/misc/ls-misc.pl: Add tests for all quoting modes, with and
without -q, to verify this assumption.
|
|
* doc/coreutils.texi (ls invocation): Describe the new
'shell-escape' and 'shell-escape-always' quoting options.
* src/ls.c (usage): Mention the new quoting options.
* tests/misc/ls-misc.pl: Add a test for 'shell-escape'
|
|
* src/test.c (test_syntax_error): Reuse verror() rather than
open coding the error output format.
(term): Don't hardcode '' quoting.
(main): Likewise.
|
|
Quote file names using the "shell-escape" or "shell-escape-always"
methods, which quote as appropriate for most shells,
and better support copy and paste of presented names.
The "always" variant is used when the file name is
embedded in an error message with surrounding spaces.
* cfg.mk (sc_error_shell_quotes): A new syntax check rule
to suggest quotef() where appropriate.
(sc_error_shell_always_quotes): Likewise for quoteaf().
* src/system.h (quotef): A new define to apply shell quoting
when needed. I.E. when shell character or ':' is present.
(quoteaf): Likewise, but always quote.
* src/*.c: Use quotef() and quoteaf() rather than quote()
where appropriate.
* tests/: Adjust accordingly.
|
|
* src/md5sum.c: Use the same file name escaping method used
when generating and checking checksums. I.E. ensure a single line
per file by starting the line with '\' for any file name containing '\n'
and replacing those with "\\n".
* NEWS: Move the item from changes in behavior to improvements,
since this is no longer a backwards incompat change when
processing stdout status messages.
* tests/misc/md5sum.pl: Remove quotes from expected status output.
* tests/misc/sha1sum.pl: Likewise.
|
|
Related to commit v8.24-61-g6796698 this provides
more consistent quoting, as quotearg_colon() defaults
to "literal" quoting by default, while quote()
provides appropriate quoting for diagnostics by default.
* gl/modules/randread: Depend on quote module rather than quotearg.
* gl/lib/randread.c: Used quote() not quotearg_colon().
* src/: Likewise.
* src/shred.c: Likewise. Also avoid unnecessary quoting
introducing overhead when wiping names.
* cfg.mk: Relax the matching expression to allow
"qname" variables as used in shred.c to satisfy the check.
* tests/: Adjust accordingly.
|
|
* src/date.c (main): Use %:z rather than %z with --iso-8601
as the standard states to consistently use extended format.
Note either format can be parsed by date.
* tests/misc/date.pl: Adjust accordingly.
* doc/coreutils.texi (du invocation): Clarify that "iso"
time styles are only similar to ISO-8601.
(ls invocation): Likewise.
(date invocation): Adjust the comment stating
that only --rfc-3339 output can be parsed by date(1).
* NEWS: Mention the change in behavior.
Reported at http://bugs.debian.org/799479
|
|
* src/factor.c: Move LIKELY() definition to...
* src/system.h: ...here.
(is_nul): Reimplement with a version that doesn't
require a sentinel after the buffer, and which calls
down to (the system optimized) memcmp.
Performance analyzed at http://rusty.ozlabs.org/?p=560
* src/dd.c (alloc_obuf): Simplify the is_nul() call by
not needing to write the sentinel.
* src/copy.c (sparse_copy): Likewise.
(copy_reg): Simplify the buffer allocation by avoiding
consideration of the sentinel in the buffer size calculation.
|
|
These strings are often file names or other user specified
parameters, which can give confusing errors in
the presence of unexpected characters for example.
* cfg.mk (sc_error_quotes): A new syntax check rule.
* src/*.c: Wrap error() string arguments with quote().
* tests/: Adjust accordingly.
* NEWS: Mention the improvement.
|
|
This is especially significant when using --check
with files generated on a windows system, where the \r
characters produce corrupted and confusing error messages.
This also ensures status messages are output on a single line.
* src/md5sum.c: Use quote() for printed file names.
* tests/misc/md5sum.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
Fixes http://bugs.gnu.org/21757
|
|
* src/ls.c (main): Account for the first column not including
a separator when calculating max_idx.
* tests/ls/w-option.sh: Add a test case.
* NEWS: Mention the bug fix.
|
|
* src/ls.c (print_with_separator): Renamed from print_with_commas,
and parameterized to accept the separator to print.
Also fix an edge case where '\n' not printed when
the POS variable overflows SIZE_MAX.
(print_current_files): Degenerate -x and -C to using the
cheaper print_with_separator() in the -w0 case.
* doc/coreutils.texi (ls invocation): Document the new feature.
* tests/ls/w-option.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
Fixes http://bugs.gnu.org/21325
|
|
* src/ls.c (know_term_type): Corresponding to commit v8.24-48-gc249a5a,
use fnmatch to inspect the dircolors database. Noticed due to
failing tests/ls/color-{dtype-dir,term}.sh tests.
|
|
The gnulib provided sc_tight_scope target was ineffective,
as it was checking against an invalid blank regular expression,
and thus ignoring any extern function issues. This is now
fixed up in gnulib, and so we need to fix our scoping issues
before the next gnulib update.
* cfg.mk: Setup and document the tight_scope config variables
appropriately.
* src/selinux.h: Since declared in *_SOURCES, use the two line
form for the extern function declarations.
* src/set-fields.h: Add the extern declarations, and since declared
in noinst_HEADERS use the single line form.
|
|
It was a little confusing as to whether the SQUFOF algorithm was
enabled, and in fact there were no options available to enable it.
Therefore clarify the 3 configurable behaviors for the code to
3 defines at the top of the program, and only include the SQUFOF
code if enabled at compile time.
$ size src/factor-before
text data bss
93997 1412 2504
$ size src/factor-after
text data bss
87885 1404 2504
* src/factor.c: Only include the SQUFOF factor code
when enabled via the USE_SQUFOF define.
* doc/coreutils.texi (factor invocation): Update note about
factor limits, as we can factor 128 bit numbers without GMP.
|
|
* man/sort.x: Cross reference with shuf(1).
* src/sort.c (usage): Mention shuf(1) with -R option.
Suggested in http://bugs.debian.org/641166
|
|
* src/uniq.c (main): Make the type of "nfiles" unsigned,
to avoid a brand new warning from a gcc I built from today's
sources (gcc version 6.0.0 20151015 (experimental) (GCC)):
src/uniq.c:523:14: error: assuming signed overflow does not occur \
when simplifying conditional to constant [-Werror=strict-overflow]
if (nfiles == 2)
^
|
|
* src/dircolors.c (dc_parse_stream): Support globbing of
TERM entries, to allow entries like "TERM *256color*" for example.
* src/dircolors.hin: Reduce the internal list with globbing.
* tests/misc/dircolors.pl: New test cases.
* NEWS: Mention the improvement.
|
|
* src/tail.c (fremote): No longer prompt the user to email
with the unrecognized file system constant, since we have
process in place to sync periodically with the latest Linux
constants, and the fall back polling mode is still fully functional.
|
|
* src/csplit.c (usage): -m is not accepted, only --suppress-matched.
* tests/misc/csplit-suppress-matched.pl: Spelling fix.
Reported by Ondrej Oprala
|
|
* src/tee.c (tee_files): Last arg is now char ** instead of char
const **, as that is a bit simpler. All callers changed. Modify
files[-1], not files[nfiles], as that is a bit faster and simpler.
Latter problem pointed out by Rainer Deyke in:
http://bugs.gnu.org/21611
|
|
This pacifies GCC 5 in a better way, without disabling diagnostics.
* src/df.c (main): Tell compiler that optind is positive.
* src/shred.c (known): New function.
(dopass): Go back to off_t for file sizes.
Avoid integer overflow if we run off the end of the file.
Tell compiler that a write cannot write more bytes than requested.
|
|
Avoid the intermittent loss of "... has become inaccessible" messages.
That would cause tests/tail-2/assert.sh to fail sometimes,
mainly on uniprocessor systems.
* src/tail.c (tail_forever_inotify): Also monitor IN_DELETE
events on the directory, to avoid a dentry unlink()..open() race,
where the open() on the deleted file was seen to succeed after an,
unlink() and a subsequent IN_ATTRIB, was sent to tail. Note an
IN_ATTRIB is sent on the monitored file to indicate the change in
number of links, and we can't just use a decrease in the number of
links to determine the file being unlinked, due to the possibility
of the file having multiple links.
Reported by Assaf Gordon and Ludovic Courtès.
Fixes http://bugs.gnu.org/21460
|
|
* src/shred.c (dopass): With -O2, GCC 5.1 gives "assuming signed
overflow does not occur when simplifying conditional to constant"
warnings, in regard to the signed (off_t) variables. Therefore
use unsigned (uintmax_t) instead, and a separate boolean to cater
for the special meaning of the negative part of the integer range.
Noticed at http://hydra.nixos.org/build/24983447
|
|
* src/dircolors.hin: Add "xterm-termite" as this VTE based terminal
emulator is quite different from xterm, despite the name.
For example "Termite supports italic text and it won't work if TERM
is set to xterm. Even the backspace key won't work properly anymore
for applications relying on terminfo".
Reported also by Lukas Sabota and Sven-Hendrik Haase.
|
|
In the presence of bind mounts of a device, the 4th "mount root" field
from /proc/self/mountinfo is now considered, so as to prefer mount
points closer to the root of the device. Note on older systems with
an /etc/mtab file, the source device was listed as the originating
directory, and so this was not an issue.
Details at http://pad.lv/1432871
* src/df.c (filter_mount_list): When deduplicating mount entries,
only prefer sources nearer or at the root of the device, when the
target is nearer the root of the device.
* NEWS: Mention the change in behavior.
|
|
* src/runcon.c (main): As per the compile time warning from
libselinux-2.4-3, lookup the class with string_to_security_class(),
rather than using defines from flask.h.
|
|
* src/sort.c (main): With --debug, warn upon setlocale() failure,
which can happen due to incorrectly specified environment variables,
or due to memory exhaustion (simulated with ulimit -v), etc.
* tests/misc/sort-debug-warn.sh: Add a test case.
See also http://savannah.gnu.org/bugs/11004
|
|
du calls stat for each mount point at startup. This would block or
even make du fail if stat for an unrelated mount point hangs.
The result is not needed in the normal case anyway and therefore
should be avoided. Issue introduced in commit v8.19-2-gcf7e1b5.
* src/du.c (fill_mount_table): Move function up as it's not used ...
(mount_point_in_fts_cycle): ... here, i.e., the DI_MNT set is
initialized and filled only iff FTS has detected a directory cycle.
(main): Remove the initialization and filling of the DI_MNT set here,
and free the DI_MNT set only if it was used.
|
|
numfmt --field=LIST can accept the same options as cut.
* bootstrap.conf: remove xlist, linked-list
* src/local.mk: link numfmt with set-fields
* src/numfmt.c: use set-fields.c instead of custom field parsing code.
(include_field): adapt to new code.
* tests/misc/numfmt.pl: add new tests, adapt current tests to new
error message wording from set-fields.c
|
|
Extract the functionality of parsing --field=LIST into a separate
module, to be used by other programs.
* src/cut.c: move field parsing code from here ...
* src/set-fields.{c,h}: ... to here.
(set_fields): generalize by supporting multiple parsing/reporting
options.
(struct range_pair): rename to field_range_pair.
* src/local.mk: link cut with set-field.
* po/POTFILES.in: add set-field.c
* tests/misc/cut.pl: update wording of error messages
|
|
* src/sort.c (main): Ensure we don't free() and invalid
pointer when reading implicit stdin. Also avoid
"definitely lost" valgrind warnings in the --files0-from case.
|
|
Since commit v8.23-19-g8defcee, main() will return,
rather than call exit(), this inducing "definitely lost"
warnings in valgrind's leak checker. That precludes using
the following to flag memory leaks:
valgrind --leak-check=full --error-exitcode=1 \
--errors-for-leak-kinds=definite
* src/pr.c (main): In dev builds, explicitly free memory allocated.
* src/sort.c (main): Likewise.
* src/tail.c (main): Likewise.
* src/tsort.c (tsort): Likewise.
|
|
* src/ls.c (getenv_quoting_style, decode_switches, parse_ls_color):
Use quote() rather than quotearg(), as the latter defaults to
outputting the input unquoted.
* src/ptx.c (main): Likewise.
|
|
* src/base64.c (main): Support decimal numbers with leading zeros,
by disabling the auto detection of octal and hex. It's not
envisaged that base conversion is needed for --wrap parameters,
and in the edge case it is, $((0x0)) shell constructs can be used.
* tests/misc/base64.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
|
|
* src/base64.c (main): Use the higher level xnumtoumax()
rather than xstrtoumax(), which is simpler and improves
validation of input. Also pass the _empty_ rather than NULL
string as the suffixes parameter so that invalid trailing
characters are not allowed. For example -w08 is now
flagged as an error, rather than being interpreted as 0.
A subsequent commit will further improve verification
of numbers with leading zeros by dropping backwards compatibility
wrt auto parsing oct and hex numbers.
* tests/misc/base64.pl: Add tests for invalid wrap values.
|
|
Suggested in https://bugzilla.redhat.com/1250113
* AUTHORS: Add base32.
* THANKS.in: Add suggester.
* README: Reference the new program.
* NEWS: Mention the new program.
* src/.gitignore: Ignore the new binary.
* bootstrap.conf: Reference the gnulib base32 module.
* build-aux/gen-lists-of-programs.sh: Add base32.
* man/base32.x: A new template.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* doc/coreutils.texi (base32 invocation): Document the new command.
* src/local.mk: Adjust to build base32 based on base64.c.
* src/base64.c: Parameterize to use the correct headers,
functions and buffer sizes, depending on which binary
is being built.
* tests/misc/base64.pl: Adjust to test both base32 and base64.
* tests/misc/tty-eof.pl: Add base32 as a program that
accepts input on stdin without any options specified.
* scripts/git-hooks/commit-msg: Add base32 to the template.
|
|
* src/shred.c (usage): For -u, separate the decscription
of the short and long option, to clarify that the short option
takes no parameter.
* src/split.c (usage): Likewise for -d.
* src/tee.c (usage): Likewise for -p.
* src/uniq.c (usage): Likewise for -D.
Suggested by Stephane Chazelas
|