| Age | Commit message (Collapse) | Author |
|---|
|
This pacifies GCC 5 in a better way, without disabling diagnostics.
* src/df.c (main): Tell compiler that optind is positive.
* src/shred.c (known): New function.
(dopass): Go back to off_t for file sizes.
Avoid integer overflow if we run off the end of the file.
Tell compiler that a write cannot write more bytes than requested.
|
|
Avoid the intermittent loss of "... has become inaccessible" messages.
That would cause tests/tail-2/assert.sh to fail sometimes,
mainly on uniprocessor systems.
* src/tail.c (tail_forever_inotify): Also monitor IN_DELETE
events on the directory, to avoid a dentry unlink()..open() race,
where the open() on the deleted file was seen to succeed after an,
unlink() and a subsequent IN_ATTRIB, was sent to tail. Note an
IN_ATTRIB is sent on the monitored file to indicate the change in
number of links, and we can't just use a decrease in the number of
links to determine the file being unlinked, due to the possibility
of the file having multiple links.
Reported by Assaf Gordon and Ludovic Courtès.
Fixes http://bugs.gnu.org/21460
|
|
* src/shred.c (dopass): With -O2, GCC 5.1 gives "assuming signed
overflow does not occur when simplifying conditional to constant"
warnings, in regard to the signed (off_t) variables. Therefore
use unsigned (uintmax_t) instead, and a separate boolean to cater
for the special meaning of the negative part of the integer range.
Noticed at http://hydra.nixos.org/build/24983447
|
|
* src/dircolors.hin: Add "xterm-termite" as this VTE based terminal
emulator is quite different from xterm, despite the name.
For example "Termite supports italic text and it won't work if TERM
is set to xterm. Even the backspace key won't work properly anymore
for applications relying on terminfo".
Reported also by Lukas Sabota and Sven-Hendrik Haase.
|
|
In the presence of bind mounts of a device, the 4th "mount root" field
from /proc/self/mountinfo is now considered, so as to prefer mount
points closer to the root of the device. Note on older systems with
an /etc/mtab file, the source device was listed as the originating
directory, and so this was not an issue.
Details at http://pad.lv/1432871
* src/df.c (filter_mount_list): When deduplicating mount entries,
only prefer sources nearer or at the root of the device, when the
target is nearer the root of the device.
* NEWS: Mention the change in behavior.
|
|
* src/runcon.c (main): As per the compile time warning from
libselinux-2.4-3, lookup the class with string_to_security_class(),
rather than using defines from flask.h.
|
|
* src/sort.c (main): With --debug, warn upon setlocale() failure,
which can happen due to incorrectly specified environment variables,
or due to memory exhaustion (simulated with ulimit -v), etc.
* tests/misc/sort-debug-warn.sh: Add a test case.
See also http://savannah.gnu.org/bugs/11004
|
|
du calls stat for each mount point at startup. This would block or
even make du fail if stat for an unrelated mount point hangs.
The result is not needed in the normal case anyway and therefore
should be avoided. Issue introduced in commit v8.19-2-gcf7e1b5.
* src/du.c (fill_mount_table): Move function up as it's not used ...
(mount_point_in_fts_cycle): ... here, i.e., the DI_MNT set is
initialized and filled only iff FTS has detected a directory cycle.
(main): Remove the initialization and filling of the DI_MNT set here,
and free the DI_MNT set only if it was used.
|
|
numfmt --field=LIST can accept the same options as cut.
* bootstrap.conf: remove xlist, linked-list
* src/local.mk: link numfmt with set-fields
* src/numfmt.c: use set-fields.c instead of custom field parsing code.
(include_field): adapt to new code.
* tests/misc/numfmt.pl: add new tests, adapt current tests to new
error message wording from set-fields.c
|
|
Extract the functionality of parsing --field=LIST into a separate
module, to be used by other programs.
* src/cut.c: move field parsing code from here ...
* src/set-fields.{c,h}: ... to here.
(set_fields): generalize by supporting multiple parsing/reporting
options.
(struct range_pair): rename to field_range_pair.
* src/local.mk: link cut with set-field.
* po/POTFILES.in: add set-field.c
* tests/misc/cut.pl: update wording of error messages
|
|
* src/sort.c (main): Ensure we don't free() and invalid
pointer when reading implicit stdin. Also avoid
"definitely lost" valgrind warnings in the --files0-from case.
|
|
Since commit v8.23-19-g8defcee, main() will return,
rather than call exit(), this inducing "definitely lost"
warnings in valgrind's leak checker. That precludes using
the following to flag memory leaks:
valgrind --leak-check=full --error-exitcode=1 \
--errors-for-leak-kinds=definite
* src/pr.c (main): In dev builds, explicitly free memory allocated.
* src/sort.c (main): Likewise.
* src/tail.c (main): Likewise.
* src/tsort.c (tsort): Likewise.
|
|
* src/ls.c (getenv_quoting_style, decode_switches, parse_ls_color):
Use quote() rather than quotearg(), as the latter defaults to
outputting the input unquoted.
* src/ptx.c (main): Likewise.
|
|
* src/base64.c (main): Support decimal numbers with leading zeros,
by disabling the auto detection of octal and hex. It's not
envisaged that base conversion is needed for --wrap parameters,
and in the edge case it is, $((0x0)) shell constructs can be used.
* tests/misc/base64.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
|
|
* src/base64.c (main): Use the higher level xnumtoumax()
rather than xstrtoumax(), which is simpler and improves
validation of input. Also pass the _empty_ rather than NULL
string as the suffixes parameter so that invalid trailing
characters are not allowed. For example -w08 is now
flagged as an error, rather than being interpreted as 0.
A subsequent commit will further improve verification
of numbers with leading zeros by dropping backwards compatibility
wrt auto parsing oct and hex numbers.
* tests/misc/base64.pl: Add tests for invalid wrap values.
|
|
Suggested in https://bugzilla.redhat.com/1250113
* AUTHORS: Add base32.
* THANKS.in: Add suggester.
* README: Reference the new program.
* NEWS: Mention the new program.
* src/.gitignore: Ignore the new binary.
* bootstrap.conf: Reference the gnulib base32 module.
* build-aux/gen-lists-of-programs.sh: Add base32.
* man/base32.x: A new template.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* doc/coreutils.texi (base32 invocation): Document the new command.
* src/local.mk: Adjust to build base32 based on base64.c.
* src/base64.c: Parameterize to use the correct headers,
functions and buffer sizes, depending on which binary
is being built.
* tests/misc/base64.pl: Adjust to test both base32 and base64.
* tests/misc/tty-eof.pl: Add base32 as a program that
accepts input on stdin without any options specified.
* scripts/git-hooks/commit-msg: Add base32 to the template.
|
|
* src/shred.c (usage): For -u, separate the decscription
of the short and long option, to clarify that the short option
takes no parameter.
* src/split.c (usage): Likewise for -d.
* src/tee.c (usage): Likewise for -p.
* src/uniq.c (usage): Likewise for -D.
Suggested by Stephane Chazelas
|
|
Problem reported by Beco in: http://bugs.gnu.org/21325
* src/ls.c (set_line_length): New function.
(decode_switches): Use it to decode COLUMNS and -w.
|
|
* bootstrap.conf (gnulib_modules): Add time_rz,
since the main source code now uses timezone_t.
* src/date.c (batch_convert, main, show_date):
* src/ls.c (align_nstrftime, long_time_expected_width)
(print_long_format):
* src/stat.c (human_time):
Use timezone_t rather than boolean to specify which time zone
is wanted.
* src/ls.c (localtz): New static var.
(main): Initialize it.
|
|
* src/uname.c (usage): State that the non POSIX -i and -p options
are non-portable.
* doc/coreutils.texi (uname invocation): Mention the discrepancies
even across GNU/Linux distros, and that the results should
be used as informational only, rather than impacting any
logic decisions.
Fixes http://bugs.gnu.org/13001
|
|
* src/realpath.c (usage): Mention 'directory' in the --help
output, so that ENOTDIR errors may be more easily investigated,
by inspecting the man page.
Reported at http://pad.lv/1474519
|
|
* src/local.mk: Link with $(LIB_FDATASYNC) needed
on some Solaris 10 systems for example.
Fixes http://bugs.gnu.org/21059
|
|
* src/dircolors.hin: tmux entries were added to ncurses in:
http://ncurses.scripts.mit.edu/?p=ncurses.git;a=blobdiff;\
f=misc/terminfo.src;h=ce9bdc3b;hp=7e576ef1;hb=be512fa0;hpb=ee1bcda2
|
|
This was detected in about 25% of runs with gcc -fsanitize=address
ERROR: AddressSanitizer: global-buffer-overflow on address ...
READ of size 4 at 0x000000416628 thread T0
#0 0x40479f in genpattern src/shred.c:782
#1 0x4050d9 in do_wipefd src/shred.c:921
#2 0x406203 in wipefile src/shred.c:1175
#3 0x406b84 in main src/shred.c:1316
#4 0x7f3454a1ef9f in __libc_start_main (/lib64/libc.so.6+0x1ff9f)
#5 0x4025d8 (/tmp/coreutils-8.23/src/shred+0x4025d8)
0x000000416628 is located 56 bytes to the left of
global variable '*.LC49' from 'src/shred.c' (0x416660) of size 17
0x000000416628 is located 12 bytes to the right of
global variable 'patterns' from 'src/shred.c' (0x416540) of size 220
SUMMARY: AddressSanitizer: global-buffer-overflow src/shred.c:782
* src/shred.c (gen_patterns): Restrict pattern selection
to the K available, which regressed due to v5.92-1462-g65533e1.
* tests/misc/shred-passes.sh: Add a deterministic test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/20998
|
|
tests/misc/wc-proc.sh fails when the page size is 64K
* src/wc.c (wc): The lseek adjustment should be based on st_blksize,
rather than on the internal buffer size. This is significant on
aarch64 where st_blksize in /proc is the 64K (the page size) and
thus larger than the internal buffer.
* src/split.c (main): Even though the similar processing is done
on the internal buffer size, that's based on st_blksize and
so fine in this regard. Add an assert to enforce this.
Avoid this path for the undocumented ---io-blksize option.
|
|
* m4/jm-macros.m4 (HAVE_FPSETPREC): Define if needed.
* src/numfmt.c (main): Call fpsetprec() if needed.
Fixes large-15 and large-16 test failures on 32 bit FreeBSD.
|
|
The new tests/misc/factor-parallel.sh test was
seen to fail on FreeBSD (derived) systems, which was
due to split(1) --filter reading partial lines
through pipes, as factor(1) was writing a little
over PIPE_BUF each time.
* src/factor.c (lbuf): A new structure to internally buffer lines.
(lbuf_alloc): A new function to allocate enough at program start.
(lbuf_putint): A new function to buffer a uintmax_t.
(lbuf_flush): A new function to write directly to standard output.
(lbuf_putc): A new function to buffer a character and if enough
lines are buffered, then output complete lines <= PIPE_BUF,
and continue to buffer the rest.
(main): Call the internal buffer allocator, and register
the final flush from the internal buffer at program exit.
|
|
* bootstrap.conf (gnulib_modules): Add setenv, to make this
module dependency explicit; setenv is also used by split.
* src/stdbuf.c (set_LD_PRELOAD) [__APPLE__]: Use the OS X setenv
function, rather than putenv, per that documentation:
https://developer.apple.com/\
library/mac/documentation/Darwin/Reference/ManPages/man3/putenv.3.html
|
|
* src/numfmt.c (parse_field_arg): Rename parameter s/optarg/arg/,
to avoid shadowing getopt's global variable.
Otherwise, building on OS X, with --enable-gcc-warnings, I saw this:
In file included from src/numfmt.c:19:0:
src/numfmt.c: In function 'parse_field_arg':
./lib/config.h:3109:25: error: declaration of 'rpl_optarg' shadows\
a global declaration [-Werror=shadow]
|
|
* src/numfmt.c (double_to_human): Fix the argument order
passed to snprintf, which happened to work on amd64 with
its separate va_arg storage area for floats¹,
but would fail tests for example on i686.
¹ https://blog.nelhage.com/2010/10/amd64-and-va_arg/
|
|
* src/df.c (filter_mount_list): Clarify why we still stat even
though devices IDs may already be available. Note using
/proc/self/mountinfo is still an advantage to get filtered items
with accurate device patchs in chroots and with bind mounts.
I.E. on older setups with static /etc/mtab, df will now
bypass that to get the more accuracte and dynamic info.
|
|
* src/chroot.c (main): Quote the passed argument,
to avoid confusing error messages.
|
|
* src/factor.c (print_uintmaxes): Comment that the
value of n_out doesn't matter on error, and add an
explicit cast to avoid any future warnings.
Suggested by Jim Meyering RE commit v8.23-229-g4d2d6c5
|
|
* src/make-prime-list.c (main): When building with
the above option, avoid this build stopping error:
"LeakSanitizer: detected memory leaks"
|
|
GCC 5.1.1 -fsanitize=undefined with glibc 2.21 is returning:
"runtime error: null pointer passed as argument 1,
which is declared to never be null"
* src/ptx.c (sort_found_occurs): Avoid the call with no entries.
|
|
* src/factor.c (n_out): A new global variable to track
how much data has been written to stdout.
(print_factors_single): Use n_out to determine whether
to flush the current (and previous) lines.
* tests/misc/factor-parallel.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
|
|
src/seq.c (scan_arg): Set precision and width _after_ exponentiation.
For example, this will make '1.1e1 12' and '11 1.2e1' equivalent.
One can still set the precision by specifying extra precision on
the start value, or more naturally with a precision on a step value.
* tests/misc/seq-precision.sh: Add new cases.
|
|
* src/seq.c (scan_arg): Set precision to 0 for hex constants
(while avoiding hex floats). This will use then use the
fast path for these arguments. Note we also set the precision
of inf to 0 here, which ensures we use consistent precision
on output where possible.
* tests/misc/seq-precision.sh: Add corresponding test cases.
|
|
* src/seq.c (main): Call seq_fast for infinite last value.
This implicitly avoids format conversion on the
999999 -> 1000000 transition.
* src/seq.c (seq_fast): Generalize the buffer handling,
and adjust to handle the "inf" last value specifics.
* tests/misc/seq-precision.sh: A new test.
* tests/local.mk: Reference the new test.
|
|
* src/numfmt.c (MAX_UNSCALED_DIGITS): Set this to LDBL_DIG
rather than hardcoding at 18 for better portability.
* tests/misc/numfmt.pl: Restrict limit tests to supported platforms.
|
|
* src/numfmt.c (simple_strtod_int): Don't count leading zeros
as significant digits. Also have leading zeros as optional
for floating point numbers.
* tests/misc/numfmt.pl: Add test cases.
* NEWS: Mention the fix.
|
|
Due to existing limits this is usually triggered
with an increased precision. We also add further
restrictions to the output of increased precision numbers.
* src/numfmt.c (simple_round): Avoid intmax_t overflow.
(simple_strtod_int): Count digits consistently
for precision loss and overflow detection.
(prepare_padded_number): Include the precision
when excluding numbers to output, since the precision
determines the ultimate values used in the rounding scheme
in double_to_human().
* tests/misc/numfmt.pl: Add previously failing test cases.
* NEWS: Mention the fix.
|
|
* src/numfmt.c (usage): Update the --format description
to indicate precision is allowed.
(parse_format_string): Parse a precision specification
like the standard printf does.
(double_to_human): Honor the precision in --to mode.
* tests/misc/numfmt.pl: New tests.
* doc/coreutils.texi (numfmt invocation): Mention the new feature.
* NEWS: Likewise.
|
|
* src/numfmt.c: Replace field handling code with logic that understands
field range specifiers. Instead of processing a single field and
printing line prefix/suffix around it, process each field in the line
checking whether it has been included for conversion. If so convert and
print, otherwise just print the unaltered field.
(extract_fields): Removed.
(skip_fields): Removed.
(process_line): Gutted and heavily reworked.
(process_suffixed_number): FIELD is now passed as an arg instead of
using a global.
(parse_field_arg): New function that parses field range specifiers.
(next_field): New function that returns pointers to the next field in
a line.
(process_field): New function that wraps the field conversion logic
(include_field): New function that checks whether a field should be
converted
(compare_field): New function used for field value comparisons in a
gl_list.
(free_field): New function used for freeing field values in a gl_list.
Global variable FIELD removed.
New global variable all_fields indicates whether all fields should be
processed.
New global variable all_fields_after stores the first field of a N-
style range.
New global variable all_fields_before stores the last field of a -M
style range.
New global variable field_list stores explicitly specified fields to
process (N N,M or N-M style specifiers).
(usage): Document newly supported field range specifiers.
* bootstrap.conf: Include xlist and linked-list modules. numfmt now
uses the gl_linked_list implementation to store the field ranges.
* tests/misc/numfmt.pl: Add tests for 'cut style' field ranges.
Adjust existing tests as partial output can occur before an error
Remove test for the 'invalid' field -5.. this is now a valid range.
* gnulib: update to avoid compiler warnings in linked-list.
* NEWS: Mention the new feature.
|
|
* src/numfmt.c (usage): Don't scale output from df
so that numfmt outputs the correct values.
|
|
* src/numfmt.c (unit_to_umax): Support SI (power of 10) suffixes
with the --from-unit and --to-unit options. Treat suffixes like
is done with --from=auto, which for example will change the meaning
of --to-unit=G to that of --to-unit=Gi. The suffix support was
previously undocumented and it's better to avoid the traditional
coreutils suffix handling in numfmt by default.
* doc/coreutils.texi: Document the new behavior. Also fix a typo
mentioning {from,to}=units=.
* tests/misc/numfmt.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
|
|
* src/tail.c (recheck): Display diagnostices for replaced files
even with reused inodes which is a common case.
* tests/tail-2/F-vs-missing.sh: Use correct diagnostic in comment.
* tests/tail-2/F-vs-rename.sh: Likewise.
|
|
* src/tail.c (tail_forever_inotify): Use the fspec pointer to
distinguish previously output files, rather than a descriptor
from the inotify event. That event descriptor was that of
the parent directory when files were created or renamed etc.
(check_fspec): Adjust for the new comparison. Also show the
header when the file is truncated, since we show data
in this case also.
* tests/tail-2/F-headers.sh: A new test case.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
|
|
Problems reported by Michael Felt, and and part of this fix taken
from code suggested by Pádraig Brady in:
http://bugs.gnu.org/20733#112
* configure.ac (stdbuf_supported): Check for warnings, and
for -fPIC and -shared, for AIX.
* src/stat.c (STRUCT_STATVFS): Define to struct statvfs64 if
STATFS is statvfs64.
* src/sync.c (sync_arg) [_AIX]: Open in write mode,
since AIX fsync doesn't work on read-only file descriptors.
* tests/misc/wc-parallel.sh: Skip test if xargs -P does not work.
|
|
Problem reported privately by Michael Felt.
* Makefile.am (install-exec-hook):
* src/local.mk (src/coreutils_symlinks, src/coreutils_shebangs)
(clean-local):
Port to POSIX shell, which doesn't allow 'for i in ; do ...'.
|
