| Age | Commit message (Collapse) | Author |
|---|
|
Like any other pseudo file system, df should show rootfs only
when the -a option is specified, i.e. specifying -trootfs alone
is not sufficient. As the rootfs entry is now elided by the
general deduplication in filter_mount_list (commit v8.20-103-gbb116d3),
all other references to rootfs can be removed again.
* src/df.c (show_rootfs): Remove global variable.
(ROOTFS): Remove constant.
(filter_mount_list): Remove case to handle rootfs specially.
(main): In the case for handling the -t option, remove setting
of the show_rootfs variable.
* tests/df/skip-rootfs.sh: Adapt the test case "df -t rootfs":
the rootfs file system must not be printed (because no -a).
* doc/coreutils.texi (df invocation): Correct the documentation
about eliding mount entries: it is not the first occurrence of
the the device which wins, but now rather the entry with the
shortest mount point name. Also adapt the description about
eliding pseudo file system types like rootfs.
* NEWS (Changes in behavior): Adapt entry.
|
|
* src/df.c (struct devlist): Add a new element for storing
pointers to mount_entry structures.
(devlist_head, dev_examined): Remove.
(filter_mount_list): Add new function to filter out the rootfs
entry (unless -trootfs is specified), and duplicities. The
function favors entries with a '/' character in me_devname
or those with the shortest me_mountdir string, if multiple
entries fulfill the first condition.
Use struct devlist to build up a list of entries already known,
and finally rebuild the global mount_list.
(get_all_entries): Call the above new function unless the -a
option is specified.
(get_dev): Remove the code for skipping rootfs and duplicities.
* tests/df/skip-duplicates.sh: Add test cases.
Co-authored-by: Bernhard Voelker <mail@bernhard-voelker.de>
|
|
* src/timeout.c (unblock_signal): A new function to unblock a
specified signal, or warn if not possible.
(set_timeout): Ensure SIGALRM is unblocked before we setup the timer.
* tests/misc/timeout-blocked.pl: A new test for the issue.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
Fixes: http://bugs.gnu.org/13535
|
|
* src/seq.c (main): With 3 positive integer args we were
checking the end value was == "1", rather than the step value.
* tests/misc/seq.pl: Add tests for this case.
Reported by Marcel Böhme in http://bugs.gnu.org/13525
|
|
* src/seq.c (get_default_format): Also account for the case where '.'
is auto added to the start value, which is significant when the
number sequence narrows.
* tests/misc/seq.pl: Add two new tests for the failing cases.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/13394
|
|
* src/cut.c (cut_fields): Handle the edge case where '\n' is
the delimiter, which could be used for example to suppress
the last line if it doesn't contain a '\n'.
* test/misc/cut.pl: Add tests for this edge case.
|
|
Previously line N+1 was inspected before line N was fully output,
which causes output ordering issues at the terminal or delays
from intermittent sources like tail -f.
* src/cut.c (cut_fields): Adjust so that we record the
previous output character so we can use that info to
determine wether to output a '\n' or not.
* tests/misc/cut.pl: Add tests to ensure existing
functionality isn't broken.
* NEWS: Mention the fix.
Fixes bug http://bugs.gnu.org/13498
|
|
* src/du.c (usage): Bring options into alphabetical order.
* doc/coreutils.texi (du invocation): Likewise.
Furthermore, use the @itemx macro for the long options
--max-depth and --threshold instead of @item.
|
|
Each program with at least one long option which is marked as
'required_argument' and which has also a short option for that
option, should print a note about mandatory arguments.
Define that well-known note centrally and use it rather than
literal printf/fputs, and add it where it was missing.
* src/system.h (emit_mandatory_arg_note): Add new function.
* src/cp.c (usage): Use it rather than literal printf/fputs.
* src/csplit.c, src/cut.c, src/date.c, src/df.c, src/du.c:
* src/expand.c, src/fmt.c, src/fold.c, src/head.c, src/install.c:
* src/kill.c, src/ln.c, src/ls.c, src/mkdir.c, src/mkfifo.c:
* src/mknod.c, src/mv.c, src/nl.c, src/od.c, src/paste.c:
* src/pr.c, src/ptx.c, src/shred.c, src/shuf.c, src/sort.c:
* src/split.c, src/stdbuf.c, src/tac.c, src/tail.c, src/timeout.c:
* src/touch.c, src/truncate.c, src/unexpand.c, src/uniq.c:
Likewise.
* src/base64.c (usage): Add call of the above new function
because at least one long option has a required argument.
* src/basename.c, src/chcon.c, src/date.c, src/env.c:
* src/nice.c, src/runcon.c, src/seq.c, src/stat.c, src/stty.c:
Likewise.
|
|
* src/du.c (opt_threshold): Add variable to hold the value of
the --threshold option specified by the user.
(long_options): Add a required_argument entry for the new
--threshold option.
(usage): Add --threshold option.
(process_file): Elide printing the entry if its size does not
meet the value specified by the --threshold option.
(main): In the argument parsing loop, add a case for the new
-t option. Convert the given argument by permitting the
well-known suffixes for megabyte, gigabytes, etc.
Handle the special case "-0": give an error as this value is
not permitted.
* doc/coreutils.texi (du invocation): Add documentation for the
above new option.
* tests/du/threshold.sh: Add new test to exercise the new option.
* tests/local.mk (all_tests): Mention the above test.
Co-authored-by: Bernhard Voelker <mail@bernhard-voelker.de>
|
|
* src/uptime.c: Add calls to gettext() and select_plural().
|
|
* src/ln.c (usage): Move a newline to the next text fragment, so
the preceding fragment about backup methods becomes the same as
the ones for cp, mv, and install. A bit easier for translators.
|
|
In addition to the previous 64 bit guards we've placed in longlong.h
there are additional _LP64 guards required for mips with -mcpu >= 3,
to avoid a build failure (http://bugs.gnu.org/13353) and on sparc
with -mcpu >= v9 in 32 bit mode where for example,
`factor 2123123123123123123123` would go into an infinite loop.
Since factor.c currently operates on uintmax_t, we restrict the use
of the assembly in longlong.h to when 'long' has the same width, to
provide a more general guard for this code.
* src/factor.c: Restrict the use of longlong.h assembly code,
to when the width of intmax_t == long.
* src/longlong.h: Remove the previous _LP64 guards to avoid
divergence from GMP's longlong.h
* NEWS: Adjust the info on build and runtime fixes.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* src/od.c: Redorder the information output by --help
to ease interpretation and so that appropriate sections
are generated by help2man.
* doc/coreutils.texi (od invocation): Fix an incorrect
reference to @var{n}, which should be @var{bytes}.
* man/od.x: Add an "Examples" section, and move the
default od format to there, and add a commonly required
format to generate hexdumps.
Reported by Akim Demaille in http://bugs.gnu.org/13280.
|
|
The current x86_64 asm code does not work for x32 (__ILP32__) ABIs,
so disable it. Note simply deleting the q suffix is not enough.
* src/longlong.h: Restrict x86_64 assembly to _LP64 targets,
which is consistent with other checks in longlong.h and
avoids this code on x32.
* NEWS: Mention the build fix.
|
|
* src/dd.c (dd_copy): To print an off_t portably we need
to use PRIdMAX and cast to intmax_t, otherwise there
could be a mismatch between say a 32 bit off_t
and uintmax_t. This was flagged by -Wformat on
a 64 bit host when compiling with CFLAGS=-m32.
|
|
This regression was introduced in commit v8.19-132-g3786fb6.
* src/seq.c (seq_fast): Don't use puts() to output the first number,
and instead insert it into the buffer as for other numbers.
Also output the terminator unconditionally.
* tests/misc/seq.pl: Add some basic tests for the -s option.
* NEWS: Mention the fix.
* THANKS.in: Reported by Philipp Gortan.
|
|
* doc/local.mk (doc/constants.texi): Ensure the doc directory
is present which is needed when doing a non source dir build,
when the doc/constants.texi target is built before other doc targets.
* src/local.mk: Add $(EXEEXT) to the make-prime-list calls.
|
|
This allows efficient processing of multiple files,
while also increasing compatibility with BSD's readlink(1).
We also add the -z, --zero option to delimit output items
with the NUL character which disambiguates output in the
presence of '\n' characters.
* src/readlink.c (usage): Add the --zero description,
and also adjust the description of --no-newline accordingly.
(main): Handle the -z option and iterate over multiple arguments.
Also as in commit v8.15-24-g9d46b25 we use fputs() and putchar()
rather than printf() for performance reasons.
* doc/coreutils.texi (readlink invocation): Document the
new --zero option, adjust the --no-newline description, and
tweak the general info to indicate multiple files are supported.
* tests/readlink/multi.sh: A new test for the new functionality.
* tests/local.mk: Reference the new test.
* man/readlink.x: Adjust the summary and also reference realpath.
* NEWS: Mention the improvement.
* THANKS.in: Suggested by Aaron Davies.
|
|
Teach tail -f that it must use polling on ceph file systems, and
let stat -f --format=%T report the file system type name, "ceph".
Website: http://ceph.com/
* src/stat.c (human_fstype): Add a case: ceph, 0x00C36400, remote.
* NEWS (Improvements): Mention it.
* THANKS.in: Update.
Reported by Konrad Wróblewski in http://bugs.gnu.org/13172.
|
|
cp --no-preserve=mode exited 1 unconditionally. Furthermore,
the tests which would have detected this error - namely
link-preserve.sh and reserve-mode.sh - failed to test
cp's exit code.
* src/copy.c (copy_reg): In the case x->explicit_no_preserve_mode,
do only set return_val to false iff the previous set_acl ()
failed.
* tests/cp/link-preserve.sh: Check cp's exit code.
* tests/cp/link-symlink.sh: Likewise.
* tests/cp/preserve-mode.sh: Likewise.
* NEWS: Mention the fix.
Bug introduced in commit v8.19-145-g24ebca6.
Reported by Florian Pritz in http://bugs.gnu.org/13119.
|
|
* src/df.c (struct devlist): Add new struct for storing already-
examined device numbers.
(devlist_head): Add new store of the above type.
(show_rootfs): Add new global boolean to not skip rootfs.
(dev_examined): Add new function to check if the device has
already been traversed.
(get_dev): Filter out rootfs unless "-t rootfs" or the -a
option is specified. Filter out duplicate entries by calling
the above new dev_examined unless the -a option is specified.
(main): Set the show_rootfs variable appropriately when the -t
option is specified for rootfs. Free device list (guarded by
IF_LINT).
* tests/df/skip-duplicates.sh: Add test to exercise the skipping
of duplicate entries.
* tests/df/skip-rootfs.sh: Add test to exercise the skipping
of the rootfs pseudo file system.
* tests/local.mk: Add the above new tests.
* NEWS (Changes in behavior): Mention the changes.
* doc/coreutils.texi (df invocation): Document df's behavior about
skipping rootfs and duplicate entries.
Co-authored-by: Bernhard Voelker.
|
|
* src/cut.c (set_fields): Don't allocate memory for
`printable_field' if there are no finite ranges.
This is achieved by keeping max_range_endpoint as 0 when
there are no finite ranges. max_range_endpoint is then
used throughout the code to guard against allocation of,
and access to the bit array.
The extra allocation was introduced via commit v8.10-3-g2e636af.
|
|
* src/cut.c (main): Treat a NUL delimiter (-d '') consistently
with non NUL delimiters, and disallow such a delimiter option,
unless a field is also specified.
(set_fields): Provide a more accurate error message when
a given list is invalid.
* tests/misc/cut.pl: Add a test case.
|
|
* src/factor.c (mp_factor_init): Init the pointers with NULL,
which xrealloc (or realloc) handles fine.
|
|
Both Debian and Ubuntu builds of coreutils 8.20 hang while running the
test suite on powerpc, which is reproducible using 'factor 122'.
This turns out to be somewhat related to http://bugs.gnu.org/12754,
but not quite the same. uintmax_t is 64 bits, but the cntlzw
instruction takes 32-bit operands, and the cntlzd option is only
available on 64-bit hardware.
* src/longlong.h: Add an _LP64 check around the PPC64 code,
so that this falls back to the C implementations.
* NEWS: Mention the fix.
|
|
When printing output delimiters, and when a to-EOL range subsumes
at least one other range, cut would mistakenly print delimiters for
the subsumed range. This bug was probably introduced via commit
v5.2.1-639-g847e066.
* src/cut.c (set_fields): Ignore any range that is subsumed by a
to-EOL range. Also, move two declarations down.
* tests/misc/cut.pl: Add tests to exercise this.
* NEWS (Bug fixes): Mention it.
Reported by Marcel Böhme in http://bugs.gnu.org/12966
|
|
* src/cut.c (set_fields): When two right-open-ended ranges are
specified, don't blindly let the latter one take precedence over
the former. Instead, use the union of the ranges.
* tests/misc/cut.pl: Add tests to exercise this.
* NEWS (Bug fixes): Mention it.
Reported by Marcel Böhme in http://bugs.gnu.org/12966
Thanks to Berhard Voelker for catching log and NEWS typos.
|
|
* src/seq.c (scan_arg): Calculate the width more accurately
for numbers specified using scientific notation.
* tests/misc/seq.pl: Add tests for cases that were mishandled.
* NEWS: Mention the fix.
* THANKS.in: Reported by Marcel Böhme.
Fixes http://bugs.gnu.org/12959
|
|
As the inodes information is usually not so much of interest,
and some file systems including btrfs do not even provide it,
reading of the full df --output is easier when the block
statistic fields come just left of the last field, the mount
point.
* src/df.c (all_args_string): Move the inodes fields before
the block fields.
(usage): Likewise.
* tests/df/df-output.sh: Likewise.
* doc/coreutils.texi (df invocation): Likewise. Additionally,
explicitly mention the default order of the --output option.
|
|
* src/copy.c (copy_internal): Use DST_MODE_BITS, not SRC_MODE.
See Bernhard R. Link in <http://bugs.gnu.org/12947> and in
<http://bugs.debian.org/598018>.
|
|
The above option has been deprecated since coreutils-7.5
by commit v7.4-129-g718b279.
* src/nl.c (PAGE_INCREMENT_OPTION_DEPRECATED): Remove enum.
(longopts): Remove "page-increment" entry.
(main): Remove PAGE_INCREMENT_OPTION_DEPRECATED case.
* NEWS (Changes in behavior): Mention the change.
Reported by Marcel Böhme in <http://bugs.gnu.org/12940>.
|
|
The command "echo 12345 | cut -b 0-" prints an empty line while
it should fail with "fields and positions are numbered from 1".
* src/cut.c (set_fields): Add a diagnostic for the invalid open
range which starts with Zero, i.e., the range 0-.
* tests/misc/cut.pl: Add tests to ensure the range 0- fails for
fields (-f) and for positions (-b, -c).
* NEWS: Mention the fix.
Reported by Marcel Böhme in <http://bugs.gnu.org/12903>.
|
|
* src/factor.c [HAVE_ATTRIBUTE_MODE]: Fix typo in #if test:
s/HAVE_LONG_LONG/HAVE_LONG_LONG_INT/. Otherwise, factor.c would
elicit assembler errors on x32: it was incorrectly defining DItype
to long instead of long long. Patch and report in
http://bugs.debian.org/693337; Mike Stone notified upstream.
|
|
* src/factor.c: Indent cpp directives to reflect their nesting.
|
|
See Stefano Lattarini in <http://bugs.gnu.org/12899>.
* src/local.mk (BUILT_SOURCES): Put $(top_srcdir)/src/primes.h here
(MAINTAINERCLEANFILES): ... instead of here.
|
|
* src/factor.c: Remove unneeded #inclusion of"verify.h".
It's already included via system.h.
|
|
This follows suggestions by Jim Meyering in
<http://bugs.gnu.org/12841#34>.
* src/make-prime-list.c (print_wide_uint): Change "nested" argument
to "nesting", and use it to avoid outputting lines that are too long.
* src/primes.h: Remove from git. This can be generated by a
maintainer. It's nicer to do so on a host with at least 128-bit
arithmetic.
|
|
With this change, the maintainer builds primes.h and it is part of
the tarball. primes.h's contents are not architecture-specific.
* .gitignore: Remove /src/primes.h.
* src/factor.c: Include verify.h.
(W): New constant. Verify that uintmax_t lacks holes
and that W is no wider than the integers used to generate primes.h.
* src/local.mk (EXTRA_DIST): Add src/primes.h.
(BUILT_SOURCES, CLEANFILES): Remove src/primes.h.
($(top_srcdir)/src/primes.h): Rename from src/primes.h.
Do not depend on src/make-prime-list. Instead, use sub-make to
build, so that we build primes.h only if it does not exist.
* src/make-prime-list.c: Include <limits.h>, for ULONG_MAX.
(wide_uint): Define to uintmax_t or unsigned __int128 if not #defined.
(struct prime, binvert, process_prime): Use it instead of uintmax_t.
(print_wide_uint): New function. This generates the proper pinv
value regardless of the width of uintmax_t on the target, so long
as the width doesn't exceed that of the width of wide_uint on the
maintainer host that generated src/primes.h.
(output_primes): Use it. Output WIDE_UINT_BITS, too. Let the
target compute its own lim, since its uintmax_t may be narrower
than ours.
(SZ): Remove.
* src/primes.h: New file, generated with 128-bit integers and usable
on any host where uintmax_t's width is no greater than 128 bits.
|
|
* src/make-prime-list.c (malloc): Undef. This fixes a problem on
AIX 8.20 reported by Michael Felt in <http://bugs.gnu.org/12841>.
|
|
These were missed in this related change v8.14-104-g44e20cd
* src/chcon.c (usage): Mention the two --preserve-root options.
* doc/coreutils.texi (chcon invocation): Plus the --dereferece option.
|
|
* src/cp.c (usage): Replace "redundant" with "ignored".
* doc/coreutils.texi (cp invocation): Likewise.
|
|
* src/df.c (usage): Add a short description of --output and its
available field names for use in the optional argument.
* doc/coreutils.texi (df invocation): Add the new option with more
details and a few examples.
* NEWS (New features): Mention the new option.
(Changes in behvaior): Mention the new placeholder for fields
in the "total" line.
|
|
This supports changing the order of the fields displayed,
and also allows the simultaneous display of inode and block fields.
src/df.c (get_dev): Factor out calling get_header to ...
(main): ... here. Call print_table only if file_systems_processed.
src/df.c (Displayable fields): Rename DEV_FIELD to SOURCE_FIELD.
Rename TYPE_FIELD to FSTYPE_FIELD. Rename FREE_FIELD to AVAIL_FIELD.
Rename MNT_FIELD to TARGET_FIELD.
* src/df.c (display_field_t): Turn loose enum definition of the
displayable fields into a typedef. Add the inode fields ITOTAL_FIELD,
IUSED_FIELD, IAVAIL_FIELD, IPCENT_FIELD.
(field_data_t): Define structure to hold the display field, the
caption, the width and the alignment for each field of the above
type.
(field_data): Add array the values of field data for each display
field.
(headers, alignments, widths): Remove arrays.
(columns): Add a pointer to the storage for the array of the actual
output columns, i.e., fields.
(ncolumns): Add counter for the current output columns.
(alloc_table_row): Allocate the dynamic ncolumns value of strings.
(print_table): Loop over ncolumns instead of constant NFIELDS. Rename
loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure. Adjust the condition for printing
the last column by comparing with the column number instead of the
field name (TARGET_FIELD). Use the width and the alignment stored in
the columns data.
(alloc_field): Add new function to allocate a field in the columns
array.
(get_field_list): Add new function to fill the array of output columns
for each mode.
(get_header): Loop over ncolumns instead of constant NFIELDS. Rename
the loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure. Remove the code for continuing the
loop if the current column is the file system type and print_type is not
active (which is now impossible). Store the cell in the columns store
along with the new width.
(get_dev): Loop over ncolumns instead of the constant NFIELDS. Rename
the loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure; move the definition down to where it
is used first. Add cases for the inode fields ITOTAL_FIELD,
IUSED_FIELD, IAVAIL_FIELD and IPCENT_FIELD. Store the cell in the
columns store along with the new width.
(main): Use new get_field_list function to fill the list of output
columns.
* src/df.c (print_table): Instead of fputs()ing directly, apply
ambsalign on the last field, too. Use the new MBA_NO_RIGHT_PAD flag
for this.
* src/df.c (TOTAL_OPTION): Add new enum value.
(long_options): Use it for the "total" option instead of 'c'.
(main): Likewise.
* src/df.c (get_dev): Remove condition to copy the fstype into the
FSTYPE_FIELD - based on whether print_type is non-Null. Since the
introduction of get_field_list(), there are only fields added to
the columns array which have to be added.
* src/df.c (get_dev): Guard the summing up of the values for the
grand total: only do it if we have to print the total and if the
current invocation is not for processing it.
* src/df.c (main): Pass a hyphen "-" for the mount point name
to get_dev.
(get_dev): As the mount_point is now always there,
remove the condition and the else case for the TARGET_FIELD.
Instead, simply copy the mount_point.
All cells are now always present. Therefore, add an assertion
statement if one was not. Furthermore, hide the problematic
characters unconditionally.
(print_table): Remove the skipping of empty cells.
* tests/df/total-verify.sh: Accommodate to the new "-" in the
target field of the summary line.
* NEWS: Mention the change in behavior.
* src/df.c (field_type_t): Add new typedef of 3 enums to distinguish
between block, inode and other fields.
(field_data_t): Add field_type member of the above new type.
(field_data): Add default values for the above field_type,
indicating whether a field contains block values, inode values
or other, generic values.
(field_values_t): Add this struct to store the field values, used
by and factored out from get_dev to be able to define such a struct
for both the inode and the block values.
(get_field_values): Add this function to obtain the block values
and the inode values from the file system usage, used by and
factored out from get_dev.
(add_to_grand_total): Add this function to sum the values of the
current mount point up for the grand total, used by and factored
out from get_dev.
(get_dev): Move the definition of the variables fsu, buf, pct and
cell down to where they are used first to give them a better scope.
Factor out input_units, output_units, total, available,
negate_available, available_to_root, used and negate_used into the
above struct field_values_t.
Factor out the mapping of the fsu values to the above variables
into above function get_field_values.
Factor out the summing up of the grand total values into the
above function add_to_grand_total.
Define block_values and inode_values of the new type and call the
new get_field_values to fill them from the fsu values.
Call the above function add_to_grand_total for summing up the
values for the grand total.
Inside the loop over all fields, define a variable 'v' to point
to either the block_values or the inode_values, depending on the
current field's field_type. Change the code in the cases
TOTAL_FIELD/ITOTAL_FIELD, USED_FIELD/IUSED_FIELD, AVAIL_FIELD/
IAVAIL_FIELD and PCENT_FIELD/IPCENT_FIELD to use the field values
where 'v' is pointing to, i.e., either the block_values or the
inode_values.
* src/df.c (main): Remove setting of grand_fsu.fsu_blocks in the
inode_format case as this is no longer needed and would lead to
wrong results once when mixed block/inode fields will be used.
* src/df.c (main): Cleanup the code at the end regarding
file_systems_processed to make the code clearer.
* src/df.c (inode_format): Remove variable.
(main): Remove initialization of the above variable.
In getopts loop, directly set the header_mode to INODES_MODE
instead of using the above variable. Afterwards, remove the
mapping to INODES_MODE as it is already set.
* src/df.c (posix_format): Move variable ...
(main): ... to here.
* src/df.c (print_table): Enhance the comment about 2-line format
in cases where the SOURCE_FIELD exceeds 20 chars, as such
behavior has been removed long ago by commit v8.10-40-g99679ff.
* src/df.c (Display modes): Add OUTPUT_MODE, remove unused NMODES.
(display_field_t): Remove unnecessary NFIELDS.
(field_data_t): Add member 'arg' for the field name in the --output
argument. Add member 'used' to remember if a field is already used
in the columns array.
(field_data): Add values for the above new members arg and used.
(all_args_string): Add variable which represents the argument for
the --output option which includes all fields.
(OUTPUT_OPTION): Add enum to identify the long --output option.
(long_options): Add optional-argument --output option.
(alloc_field): Assert that the field is not already used.
Mark the field as used.
(decode_output_arg): Add function to parse the comma-separated
field list passed to the --output option in order to add the
appropriate fields to the columns array.
(get_field_list): Add case for the new OUTPUT_MODE to add all
available fields to columns in the case the --output option
has been passed without any values. Use the comma-separated
field list form to pass to decode_output_arg to keep the field
header mapping for the OUTPUT_MODE only on one place.
(main): Define format string msg_mut_excl to be used in the
following checks whether the use of --output and the other
option is mutually exclusive.
In the getopt_long loop, add a check to the case for the -i option
to issue an error message when it is used together with --output;
Likewise for -T and -P.
Add a new case for OUTPUT_OPTION, together with similar checks as
above and eventually passing the optarg to decode_output_arg.
After the getopt_long loop, consider the OUTPUT_MODE case in order
not to run into -h or -P mode.
* src/df.c (get_dev): Also xstrdup the dev_name, and free it
afterwards to silence a valgrind warning about definitely lost
memory.
(main): Free the columns store to silence valgrind, guarded by
the IF_LINT macro.
* src/df.c (main): Pass "total" as the mount point to get_dev if
the SOURCE_FIELD is not among the columns to output.
* tests/df/df-output.sh: Change the test to ensure the content of
the target field of the grand total line: if the source field is
present, then the target should be "-", else the target field should
be "target".
* NEWS (Changes in behavior): Enhance the exiting NEWS entry.
* doc/coreutils.texi (df invocation): Document the content of the
source and target field in the grand total line.
* src/df.c (main): Add another condition to the need_fs_type
parameter of read_file_system_list whether the FSTYPE_FIELD is
used or not.
* src/df.c (get_header): Indicate the block size used,
in the "size" header, when using --output without -h.
* tests/df/df-output.sh: Adjust for, and add an extra test for,
the new behavior.
|
|
It's useful for commands that support running for an indeterminite
amount of time, to not return a specific timeout exit status (124),
and instead let the command handle the timeout signal and return
a status for the work done so far.
* doc/coreutils.texi (timeout invocation): Describe the new option.
* src/timeout.c (preserve_status): A new global boolean to
enable the --preserve-status behavior.
(usage): Describe the new option.
(main): Don't return EXIT_TIMEOUT of preserve_status is set.
* tests/misc/timeout.sh: Add a test for the new option.
|
|
* src/longlong.h: Restrict some HPPA assembly variants to PA RISC V2.0.
Note we also avoid this assembly for ilp32 runtimes, since even though
the assembly is accepted there, it's not safe as the context can get
clobbered between the 'add' and 'add,dc'.
This fixes a compile failure with newer HPPA systems with default
GCC CPU options.
Reported by John David Anglin
|
|
This was not seen to be an issue in practise,
but to make the code more robust, don't assume
uintmax_t is 64 bits.
* src/factor.c (W_TYPE_SIZE): Define based on integer limits.
* src/make-prime-list.c (output_primes): Define format width
based on integer limits.
|
|
* src/factor.c (print_uintmaxes): Replace with PRIuMAX.
* src/join.c (check_order): Likewise.
* cfg.mk (sc_check-j-printf-format): Add a syntax-check rule
to flag new cases of this.
|
|
* src/make-prime-list.c: Hardcode the uintmax_t width
to 16 hex digits (64 bit), to avoid this compile issue
on HPUS systems at least.
|
