| Age | Commit message (Collapse) | Author |
|---|
|
A lot of this is converting http: to https:.
Also, gmane went away, so remove URLs that no longer work and
are not easy to figure out what they were.
Some of this stuff is so old that it no longer matters anyway.
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
Reproduced under UBSAN with `tail -f <&-` giving:
tail.c:2220:18: runtime error: load of value 190,
which is not a valid value for type ‘_Bool'
* src/tail.c (tail_file): Ensure f->ignore is initialized
in all cases where we can't tail the specified file.
* tests/tail-2/follow-stdin.sh: Add a test case which
checks stderr has no UBSAN warnings.
Fixes http://bugs.gnu.org/25041
|
|
In recent commit v8.25-93-g7fc7206 we used the f->remote flag
which wasn't set in all cases. This was detected with
ASAN giving this error when reading f->remote;
runtime error: load of value 190,
which is not a valid value for type '_Bool'
* src/tail.c (fremote): Query the system even without inotify.
(recheck): Always set f->fremote for valid files.
|
|
* src/tail.c (tail_file): On failure to open a file,
set ignore=true when --retry is not specified.
* tests/tail-2/assert-2.sh: Adjust to the new behavior.
* tests/tail-2/retry.sh: Add a test case. Also change
from `tail ... && fail=1` to the more robust `returns_ 1 ...`
construct which detects segfaults etc.
* NEWS: Document the fix.
|
|
* src/tail.c (tail_forever): The BLOCKING optimization is only
enabled for non regular files (which can't be truncated), so ensure
we don't enable that unless we've a valid file descriptor.
* tests/tail-2/retry.sh: Add a test case.
* NEWS: Mention the bug fix.
|
|
* src/tail.c (tail_forever): Only read up to st_size on network
file systems to avoid the issue with a stale attribute cache
returning a smaller st_size than we have already read().
The was seen with glusterfs at least and caused the complete
file to be repeatedly output due to assuming the file was
truncated in this case.
* NEWS: Mention the fix.
|
|
* src/tail.c (ignore_pipe_or_fifo): Mark the descriptor as -1
for pipes so that any_live_files() detects correctly that
the entry is no longer live.
* tests/tail-2/pipe-f.sh: Add a test case.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/24903 which was detected
using Symbolic Execution techniques developed in
the course of the SYMBIOSYS research project at
COMSYS, RWTH Aachen University.
|
|
die() has the advantage of being apparent to the compiler
that it doesn't return, which will avoid warnings in some cases,
and possibly generate better code.
* cfg.mk (sc_die_EXIT_FAILURE): A new syntax check rule to
catch any new uses of error (CONSTANT, ...);
|
|
* src/die.h (die): New file/function from grep.
Note: we expect this file to migrate to gnulib.
* src/csplit.c: Include die.h.
(check_format_conv_type): Use die in place of error-nonzero;break;
* src/install.c (strip): Likewise.
* src/nl.c (proc_text): Likewise. This also suppresses a new warning
from GCC 7's -Werror=strict-overflow.
* src/tail.c (parse_options): Likewise.
* src/basename.c (main): Adjust "fall through" comment
so that GCC 7's -Wimplicit-fallthrough honors it.
* src/cp.c (main): Add a "fall through" comment.
* src/ls.c (gobble_file): Likewise.
(get_funky_string): Adjust a "fall through" comment so it is
recognized.
* cfg.mk (exclude_file_name_regexp--sc_system_h_headers): Add die.h
to this list of exempt src/*.h files.
|
|
which was not the case when inotify was not available.
* src/tail.c (any_live_files): Simplify, since the IGNORE
flag is now only set when a file should be ignored indefinitely.
(recheck): Only output the "giving up on name" message
when that's actually the case. Only set the IGNORE flag
when ignoring a file indefinitely.
(tail_file): Likewise.
* tests/tail-2/retry.sh: Add a test case. Also run
all existing test cases with and without inotify.
NEWS: Mention the fix.
THANKS.in: Add the reporter.
Fixes http://bugs.gnu.org/24495 which was detected
using Symbolic Execution techniques developed in
the course of the SYMBIOSYS research project at
COMSYS, RWTH Aachen University.
|
|
sort, tail, and uniq now support traditional usage like 'sort +2'
and 'tail +10' on systems conforming to POSIX 1003.1-2008 and later.
* NEWS: Document this.
* doc/coreutils.texi (Standards conformance, tail invocation)
(sort invocation, uniq invocation, touch invocation):
Document new behavior, or behavior's dependence on POSIX 1003.1-2001.
* src/sort.c (struct keyfield.traditional_used):
Rename from obsolete_used, since implementations are now allowed
to support it. All uses changed.
(main): Allow traditional usage if _POSIX2_VERSION is 200809.
* src/tail.c (parse_obsolete_option): Distinguish between
traditional usage (which POSIX 2008 and later allows) and obsolete
(which it still does not).
* src/uniq.c (strict_posix2): New function.
(main): Allow traditional usage if _POSIX2_VERSION is 200809.
* tests/misc/tail.pl: Test for new behavior.
|
|
tests/tail-2/F-headers.sh and test/tail-2/retry.sh fail on
on remote file systems due to tail going into inotify mode
due to not being able to determine the remoteness of the
non existent files.
* src/tail.c (any_non_remote_file): A new function used
to disable inotify when there are no open files, as
we can't determine remoteness in that case.
* NEWS: Mention the bug fix.
|
|
* doc/coreutils.texi: Reference the option description.
* src/head.c: Parameterize the delimiter character.
* src/tail.c: Likewise.
* tests/misc/head.pl: Add test case.
* tests/misc/tail.pl: Likewise.
* NEWS: Mention the new feature.
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
The character 'K' representing numeric user input can be confusing,
especially in the context where it can be suffixed by the multipliers
K, M, G, etc.
Use NUM instead.
* doc/coreutils.texi (head invocation): Replace @var{k} by @var{num}.
Also change @var{count} in the paragraph about the obsolete option
syntax.
(tail invocation): Likewise. Furthermore, adjust the option order to
alphabetical sorting.
* src/head.c (usage): s/K/NUM/ in as placeholder in the -c and -n
options. Furthermore, print the actual DEFAULT_NUMBER instead of the
hard-coded 10.
* src/tail.c (usage): s/K/NUM/ in as placeholder in the -c and -n
options. Add "[+]" to clarify that NUM may optionally be preceded by
this sign. Remove the redundant explanation of the optional '+' prefix
for NUM, as that is now clear from the option description above.
Suggested by Dan Jacobson in http://bugs.gnu.org/22042
|
|
Quote file names using the "shell-escape" or "shell-escape-always"
methods, which quote as appropriate for most shells,
and better support copy and paste of presented names.
The "always" variant is used when the file name is
embedded in an error message with surrounding spaces.
* cfg.mk (sc_error_shell_quotes): A new syntax check rule
to suggest quotef() where appropriate.
(sc_error_shell_always_quotes): Likewise for quoteaf().
* src/system.h (quotef): A new define to apply shell quoting
when needed. I.E. when shell character or ':' is present.
(quoteaf): Likewise, but always quote.
* src/*.c: Use quotef() and quoteaf() rather than quote()
where appropriate.
* tests/: Adjust accordingly.
|
|
These strings are often file names or other user specified
parameters, which can give confusing errors in
the presence of unexpected characters for example.
* cfg.mk (sc_error_quotes): A new syntax check rule.
* src/*.c: Wrap error() string arguments with quote().
* tests/: Adjust accordingly.
* NEWS: Mention the improvement.
|
|
* src/tail.c (fremote): No longer prompt the user to email
with the unrecognized file system constant, since we have
process in place to sync periodically with the latest Linux
constants, and the fall back polling mode is still fully functional.
|
|
Avoid the intermittent loss of "... has become inaccessible" messages.
That would cause tests/tail-2/assert.sh to fail sometimes,
mainly on uniprocessor systems.
* src/tail.c (tail_forever_inotify): Also monitor IN_DELETE
events on the directory, to avoid a dentry unlink()..open() race,
where the open() on the deleted file was seen to succeed after an,
unlink() and a subsequent IN_ATTRIB, was sent to tail. Note an
IN_ATTRIB is sent on the monitored file to indicate the change in
number of links, and we can't just use a decrease in the number of
links to determine the file being unlinked, due to the possibility
of the file having multiple links.
Reported by Assaf Gordon and Ludovic Courtès.
Fixes http://bugs.gnu.org/21460
|
|
Since commit v8.23-19-g8defcee, main() will return,
rather than call exit(), this inducing "definitely lost"
warnings in valgrind's leak checker. That precludes using
the following to flag memory leaks:
valgrind --leak-check=full --error-exitcode=1 \
--errors-for-leak-kinds=definite
* src/pr.c (main): In dev builds, explicitly free memory allocated.
* src/sort.c (main): Likewise.
* src/tail.c (main): Likewise.
* src/tsort.c (tsort): Likewise.
|
|
* src/tail.c (recheck): Display diagnostices for replaced files
even with reused inodes which is a common case.
* tests/tail-2/F-vs-missing.sh: Use correct diagnostic in comment.
* tests/tail-2/F-vs-rename.sh: Likewise.
|
|
* src/tail.c (tail_forever_inotify): Use the fspec pointer to
distinguish previously output files, rather than a descriptor
from the inotify event. That event descriptor was that of
the parent directory when files were created or renamed etc.
(check_fspec): Adjust for the new comparison. Also show the
header when the file is truncated, since we show data
in this case also.
* tests/tail-2/F-headers.sh: A new test case.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
|
|
Generally if logs are truncated, they're truncated to 0 length,
so output all existing data when our heuristic determines truncation.
Note with inotify, truncate() and write() are often determined
independently and so all data would be written if that was the case.
* src/tail.c (check_fspec): Reset file offset to 0 upon truncation.
(tail_forever): Likewise.
(recheck): Add a FIXME for the related issue where tail may lose
data due to tail discounting older log files too early.
* tests/tail-2/truncate.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
|
|
The previous fixes to races in the various tail tests,
identified actual races in the tail inotify implementation.
With --follow=descriptor, if the tailed file was replaced before
the inotify watch was added, then any subsequent changes were ignored.
Similarly in --follow=name mode, all changes to a new name were
effectively ignored if that name was created after the original open()
but before the inotify_add_watch().
* src/tail.c (tail_forever_inotify): Fix 3 cases.
1. With -f, don't stop tailing when file removed before watch.
2. With -f, watch right file when file replaced before watch.
3. With -F, inspect correct file when replaced before watch.
Existing tests identify these when tail compiled with TAIL_TEST_SLEEP.
* tests/tail-2/inotify-rotate-resources.sh:
This test also identifies the issue with --follow=name
when TAIL_TEST_SLEEP is used. Adjust so the test is immune
to such races, and also fail quicker on remote file systems.
* tests/tail-2/inotify-race2.sh: A new test using GDB,
based on inotify-race.sh, which tests the -F race
without needed recompilation with sleeps.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug.
|
|
* src/system.h (emit_stdin_note): A new function, refactoring
the usage note about the '-' FILE implying stdin.
* src/base64.c (usage): Use the new function to emit the
note in a standard location and with standard separation.
* src/cat.c (usage): Likewise.
* src/csplit.c (usage): Likewise.
* src/cut.c (usage): Likewise.
* src/expand.c (usage): Likewise.
* src/fmt.c (usage): Likewise.
* src/head.c (usage): Likewise.
* src/md5sum.c (usage): Likewise.
* src/nl.c (usage): Likewise.
* src/od.c (usage): Likewise.
* src/paste.c (usage): Likewise.
* src/pr.c (usage): Likewise.
* src/ptx.c (usage): Likewise.
* src/shred.c (usage): Likewise.
* src/shuf.c (usage): Likewise.
* src/sort.c (usage): Likewise.
* src/sum.c (usage): Likewise.
* src/tac.c (usage): Likewise.
* src/tail.c (usage): Likewise.
* src/tsort.c (usage): Likewise.
* src/unexpand.c (usage): Likewise.
* src/wc.c (usage): Likewise.
* src/join.c (usage): Adjust the separation used for
the message referring to FILE1 or FILE2 as stdin.
* src/comm.c (usage): Add a message using the same
wording (translation) as used in join.
* src/split.c (usage): Reword to using FILE rather than
INPUT, allowing use of emit_stdin_note(). Also remove
the mention of "fixed-size" pieces as this isn't now
always the case.
Fixes http://pad.lv/1450179
|
|
All warnings were of the form: "assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]"
* src/dd.c (cache_round): Use an appropriately sized unsigned type,
to avoid possibility of undefined signed overflow.
* src/mknod.c (main): Likewise.
* src/pr.c (pad_down): Likewise.
* src/wc.c (main): Likewise.
* src/tail.c (main): Assert that argc >= 0 thus allowing the
compiler to assume without implication that argc - optind
is positive.
|
|
* src/tail.c (tail_forever_inotify): Only monitor write()s and
truncate()s to files in --follow=descriptor mode, thus avoiding
the bug where we removed the watch on renamed files.
Also adjust the inotify event processing code that is
now significant only in --follow=name mode.
* tests/tail-2/F-vs-rename.sh: Improve this existing test by running
in both polling and inotify modes.
* tests/tail-2/f-vs-rename.sh: A new test based on the existing one.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug.
Fixes http://bugs.gnu.org/19760
|
|
* src/tail.c (main): Document another caveat with the
inotify implementation wrt multiple hardlinked files.
|
|
Each user has a maximum number of inotify watches,
so handle the cases where we exhaust these resources.
* src/tail.c (tail_forever_inotify): Ensure we inotify_rm_watch()
the watch for an inode, when replacing with a new watch for a name.
Return all used inotify resources when reverting to polling.
Revert to polling upon first indication of inotify resource exhaustion.
Revert to polling on any inotify resource exhaustion.
Diagnose resource exhaustion correctly in all cases.
Avoid redundant reinsertion in the hash for unchanged watches
(where only attributes of the file are changed).
* tests/tail-2/retry.sh: Avoid false failure when reverting to polling.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: New test to check
that we're calling inotify_rm_watch() for replaced files.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
* THANKS.in: Thanks for reporting and problem identification.
|
|
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
|
|
Following on from commit v8.23-82-gaddae94, consistently diagnose
numbers that are too large, so as to distinguish from other errors,
and make the limits obvious.
* gl/modules/xdectoint: A new module implementing xdecto[iu]max(),
which handles the common case of parsing a bounded integer and
exiting with a diagnostic on error.
* gl/lib/xdectoimax.c: The signed variant.
* gl/lib/xdectoint.c: The parameterized implementation.
* gl/lib/xdectoint.h: The interface.
* gl/lib/xdectoumax.c: The unsigned variant.
* bootstrap.conf: Reference the new module.
* cfg.mk (exclude_file_name_regexp--sc_require_config_h_first):
Exclude the parameterized templates.
* src/csplit.c: Output EOVERFLOW or ERANGE errors if appropriate.
* src/fmt.c: Likewise.
* src/fold.c: Likewise.
* src/head.c: Likewise.
* src/ls.c: Likewise.
* src/nl.c: Likewise.
* src/nproc.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/stdbuf.c: Likewise.
* src/stty.c: Likewise.
* src/tail.c: Likewise.
* src/truncate.c: Likewise.
* src/split.c: Likewise.
* src/pr.c: Likewise.
* tests/pr/pr-tests.pl: Adjust to avoid matching errno diagnostic.
* tests/fmt/base.pl: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/misc/shred-negative.sh: Likewise.
* tests/misc/tail.pl: Likewise. Also remove the redundant
existing ERR_SUBST from test err-6.
* tests/ls/hex-option.sh: Check HEX/OCT options.
* tests/misc/shred-size.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
|
|
Fix similar problems in head, od, split, tac, and tail.
Reported by George Shuklin in: http://bugs.gnu.org/18621
* NEWS: Document this.
* src/head.c (elseek): Move up.
(elide_tail_bytes_pipe, elide_tail_lines_pipe): New arg
CURRENT_POS. All uses changed.
(elide_tail_bytes_file, elide_tail_lines_file):
New arg ST and remove arg SIZE. All uses changed.
* src/head.c (elide_tail_bytes_file):
* src/od.c (skip): Avoid optimization for /sys files, where
st_size is bogus and st_size == st_blksize.
Don't report error at EOF when not optimizing.
* src/head.c, src/od.c, src/tail.c: Include "stat-size.h".
* src/split.c (input_file_size): New function.
(bytes_split, lines_chunk_split, bytes_chunk_extract): New arg
INITIAL_READ. All uses changed. Use it to double-check st_size.
* src/tac.c (tac_seekable): New arg FILE_POS. All uses changed.
(copy_to_temp): Return size of temp file. All uses changed.
* src/tac.c (tac_seekable):
* src/tail.c (tail_bytes):
* src/wc.c (wc):
Don't trust st_size; double-check by reading.
* src/wc.c (wc): New arg CURRENT_POS. All uses changed.
* tests/local.mk (all_tests): Add tests/misc/wc-proc.sh,
tests/misc/od-j.sh, tests/tail-2/tail-c.sh.
* tests/misc/head-c.sh:
* tests/misc/tac-2-nonseekable.sh:
* tests/split/b-chunk.sh:
Add tests for problems with /proc and /sys files.
* tests/misc/od-j.sh, tests/misc/wc-proc.sh, tests/tail-2/tail-c.sh:
New files.
|
|
* src/system.h (emit_ancillary_info): Take the invariant PROGRAM_NAME
as a parameter, so that consistent references are made to online docs
and texinfo nodes, when a --program-prefix is in place. Note the
man pages don't need this fix as they're generated before the program
prefix is used.
* NEWS: Mention the improvements in references to online documentation.
|
|
* build-aux/gen-single-binary.sh: Don't use ATTRIBUTE_NORETURN
for main functions.
* src/base64.c, src/basename.c, src/cat.c, src/chcon.c, src/chgrp.c:
* src/chmod.c, src/chown.c, src/chroot.c, src/cksum.c, src/comm.c:
* src/cp.c, src/csplit.c, src/cut.c, src/date.c, src/dd.c, src/df.c:
* src/dircolors.c, src/dirname.c, src/du.c, src/echo.c, src/env.c:
* src/expand.c, src/expr.c, src/factor.c, src/fmt.c, src/fold.c:
* src/getlimits.c, src/groups.c, src/head.c, src/hostid.c:
* src/hostname.c, src/id.c, src/install.c, src/join.c, src/kill.c:
* src/link.c, src/ln.c, src/logname.c, src/ls.c, src/make-prime-list.c:
* src/md5sum.c, src/mkdir.c, src/mkfifo.c, src/mknod.c, src/mktemp.c:
* src/mv.c, src/nice.c, src/nl.c, src/nohup.c, src/nproc.c:
* src/numfmt.c, src/od.c, src/paste.c, src/pathchk.c, src/pinky.c:
* src/pr.c, src/printenv.c, src/printf.c, src/ptx.c, src/pwd.c:
* src/readlink.c, src/realpath.c, src/rm.c, src/rmdir.c, src/runcon.c:
* src/seq.c, src/shred.c, src/shuf.c, src/sleep.c, src/sort.c:
* src/split.c, src/stat.c, src/stdbuf.c, src/stty.c, src/sum.c:
* src/sync.c, src/tac.c, src/tail.c, src/tee.c, src/timeout.c:
* src/touch.c, src/tr.c, src/true.c, src/truncate.c, src/tsort.c:
* src/tty.c, src/uname.c, src/unexpand.c, src/uniq.c, src/unlink.c:
* src/uptime.c, src/users.c, src/wc.c, src/who.c, src/whoami.c:
In 'main' functions, Prefer 'return status;' to 'exit (status);'.
* src/coreutils-arch.c (_single_binary_main_uname)
(_single_binary_main_arch):
* src/coreutils-dir.c, src/coreutils-vdir.c (_single_binary_main_ls)
(_single_binary_main_dir, _single_binary_main_vdir):
Omit ATTRIBUTE_NORETURN. Return a value.
* src/coreutils.c (SINGLE_BINARY_PROGRAM): Omit ATTRIBUTE_NORETURN.
(launch_program): Now static.
* src/dd.c (finish_up): New function.
(quit, main): Use it.
* src/getlimits.c (main): Return a proper exit status.
* src/test.c (test_main_return): New macro.
(main): Use it.
* src/logname.c, src/nohup.c, src/whoami.c:
Use 'error' to simplify exit status in 'main' function.
* src/yes.c (main): Use 'return' rather than 'error' to exit,
so that GCC doesn't suggest ATTRIBUTE_NORETURN.
|
|
If we can't output more data, we should immediately
diagnose the issue and exit rather than consuming all
of input (in some cases).
* src/tail.c (xwrite_stdout): Also diagnose the case where
only some data is written. Also clearerr() to avoid the
redundant less specific error from atexit (close_stdout);
* src/head.c (xwrite_stdout): Copy this new function from tail,
and use it to write all output.
* tests/misc/head-write-error.sh: A new test to ensure we
exit immediately on write error.
* tests/local.mk: Reference the new test.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* src/tail.c: With inotify, when a file is initially absent,
we fstat(-1) for that file spec, thus recording an errnum of EBADF,
which caused the "has become accessible" diagnostic to be issued,
when the file first appears. Instead we avoid the fstat(-1) and
thus emit the more natural and consistent "has appeared" diagnostic.
* tests/tail-2/retry.sh: Use the new diagnostic which also causes
this test to pass on systems without inotify.
|
|
Previous behavior failed to read contents of a (re)appearing file,
when symlinked by tail's watched file. Also we now diagnose other
edge cases when running in inotify mode, where an initially
missing or regular file changes to a symlink.
* src/tail.c (main): If any arg is a symlink, use polling mode.
(recheck): Diagnose the edge case where a symlink appears during
inotify processing.
* tests/tail-2/symlink.sh: Test the fix. Mention the edge cases.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
Reported by: Ondrej Oprala
|
|
Also slightly rephrase some descriptions for extra clarity, and
add more consistent indentation.
* src/df.c (usage): Semicolon, no final period.
* src/du.c (usage): Likewise, plus indentation and clarifying words.
* src/ls.c (usage): Semicolon, rephrasings, added parentheses for
clarity, indentation.
* src/rm.c (usage): Semicolons.
* src/tail.c (usage): Adjust -f description to prefer explanatory
language instead of option syntax.
|
|
Also do not end option descriptions with a period, properly indent
continuation lines, and make some tiny clarifications.
* src/du.c (usage): Lowercase after semicolon.
* src/ls.c (usage): Semicolons instead of periods, small rephrasing
and two hyphens for clarity, proper indentation.
* src/mktemp.c (usage): Semicolons and lowercase.
* src/od.c (usage): Semicolons.
* src/ptx.c (usage): Use the standard phrase, clarify default option.
* src/setuidgid.c (usage): Properly indent continuation line.
* src/split.c (usage): Semicolons, lowercase, no final period.
* src/stat.c (usage): Semicolons, lowercase.
* src/tail.c (usage): Proper indentation, one shorter rephrasing,
semicolons, no final periods.
* src/timeout.c (usage): Properly indent, semicolons, no final periods.
Fixes http://bugs.gnu.org/14976
|
|
* configure.ac: If clang, add -Wno-format-extra-args and
-Wno-tautological-constant-out-of-range-compare.
* gl/lib/rand-isaac.c (ind):
* gl/lib/randread.c (readisaac):
* src/ls.c (dev_ino_push, dev_ino_pop):
* src/sort.c (buffer_linelim):
* src/system.h (is_nul):
* src/tail.c (tail_forever_inotify):
Rewrite to avoid casts that clang dislikes.
It's good to avoid casts anyway.
* src/expr.c (integer_overflow): Declare only if it exists.
(die): Remove; unused.
* src/ls.c (dev_ino_push): New function, replacing ...
(DEV_INO_PUSH): ... this removed macro. All uses changed.
(decode_switches): Rewrite "str"+i to &str[i].
|
|
As a side effect of the previous commit which fixes 'tail -f --retry'
to wait for a file to appear, tail would not exit when the last file
appears untailable and gives up on this file.
This can happen, for example, when the argument file name appears
as directory. Tail sets the 'ignore' flag of this file to true,
but instead of exiting the program, tail would continue the loop.
* src/tail.c (any_live_files): Change the function to return true
if any of the files is still tailable or if tail should continue to
try to check again.
(tail_forever): Change the condition to break the loop in the
"no files remaining" case, because now any_live_files() will care
about it, as mentioned above.
(parse_options): When --retry is used without any follow mode,
then reset reopen_inaccessible_files to false.
* tests/tail-2/retry.sh: Add test case.
|
|
The --retry option is indeed useful for both following modes
by name and by file descriptor. The difference is that in the
latter case, it is effective only during the initial open.
As a regression of the implementation of the inotify support,
tail -f --retry would immediately exit if the given file is
inaccessible.
* src/tail.c (usage): Change the description of the --retry option:
remove the note that this option would mainly be useful when
following by name.
(main): Change diagnosing dubios uses of --retry option:
when the --retry option is used without following, then issue
a warning that this option is ignored; when it is used together
with --follow=descriptor, then issue a warning that it is only
effective for the initial open.
Disable inotify also in the case when the initial open in tail_file()
failed (which is the actual bug fix).
* init.cfg (retry_delay_): Pass excess arguments to the test function.
* tests/tail-2/retry.sh: Add new tests.
* tests/local.mk (all_tests): Mention it.
* doc/coreutils.texi (tail invocation): Enhance the documentation
of the --retry option. Clarify the difference in tail's behavior
regarding the --retry option when combined with the following modes
name versus descriptor.
* NEWS (Bug fixes): Mention the fix.
Reported by Noel Morrison in:
http://lists.gnu.org/archive/html/coreutils/2013-04/msg00003.html
|
|
* src/tail.c (main): If -n0 or -c0 were specified without -f,
then no data would ever be output, so exit without reading input.
* tests/tail-2/tail-n0f.sh: Augment the related test with this case.
|
|
Each program with at least one long option which is marked as
'required_argument' and which has also a short option for that
option, should print a note about mandatory arguments.
Define that well-known note centrally and use it rather than
literal printf/fputs, and add it where it was missing.
* src/system.h (emit_mandatory_arg_note): Add new function.
* src/cp.c (usage): Use it rather than literal printf/fputs.
* src/csplit.c, src/cut.c, src/date.c, src/df.c, src/du.c:
* src/expand.c, src/fmt.c, src/fold.c, src/head.c, src/install.c:
* src/kill.c, src/ln.c, src/ls.c, src/mkdir.c, src/mkfifo.c:
* src/mknod.c, src/mv.c, src/nl.c, src/od.c, src/paste.c:
* src/pr.c, src/ptx.c, src/shred.c, src/shuf.c, src/sort.c:
* src/split.c, src/stdbuf.c, src/tac.c, src/tail.c, src/timeout.c:
* src/touch.c, src/truncate.c, src/unexpand.c, src/uniq.c:
Likewise.
* src/base64.c (usage): Add call of the above new function
because at least one long option has a required argument.
* src/basename.c, src/chcon.c, src/date.c, src/env.c:
* src/nice.c, src/runcon.c, src/seq.c, src/stat.c, src/stty.c:
Likewise.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* src/tail.c (tail_forever): Close FD to avoid leak after a
failed fstat.
|
|
* src/tail.c (check_fspec): Save fstat-induced errno *before*
calling close_fd, not after. Otherwise, the close could well
clobber the global errno, making tail print an invalid diagnostic.
This could happen only with tail -f, and even then, only when
a valid file descriptor were to provoke fstat failure.
|
|
Run "make update-copyright".
|
