summaryrefslogtreecommitdiff
path: root/src/head.c
AgeCommit message (Collapse)Author
2015-11-04all: avoid quoting file names when possiblePádraig Brady
Quote file names using the "shell-escape" or "shell-escape-always" methods, which quote as appropriate for most shells, and better support copy and paste of presented names. The "always" variant is used when the file name is embedded in an error message with surrounding spaces. * cfg.mk (sc_error_shell_quotes): A new syntax check rule to suggest quotef() where appropriate. (sc_error_shell_always_quotes): Likewise for quoteaf(). * src/system.h (quotef): A new define to apply shell quoting when needed. I.E. when shell character or ':' is present. (quoteaf): Likewise, but always quote. * src/*.c: Use quotef() and quoteaf() rather than quote() where appropriate. * tests/: Adjust accordingly.
2015-11-04all: replace most uses of quotearg_colon() with quote()Pádraig Brady
Related to commit v8.24-61-g6796698 this provides more consistent quoting, as quotearg_colon() defaults to "literal" quoting by default, while quote() provides appropriate quoting for diagnostics by default. * gl/modules/randread: Depend on quote module rather than quotearg. * gl/lib/randread.c: Used quote() not quotearg_colon(). * src/: Likewise. * src/shred.c: Likewise. Also avoid unnecessary quoting introducing overhead when wiping names. * cfg.mk: Relax the matching expression to allow "qname" variables as used in shred.c to satisfy the check. * tests/: Adjust accordingly.
2015-05-30maint: avoid new coverity warningsPádraig Brady
* src/sync.c (sync_arg): Initialise variable to avoid unitialized access if assert is disabled. * src/head.c (elide_tail_bytes_file): Support this function with ---presume-input-pipe and larger files, which regressed with commit v8.23-47-g2662702. (elide_tail_lines_file): Likewise. * src/dd.c (dd_copy): Explicitly don't try to ftruncate() upon failure to lseek() (the existing check against st_size was already protecting that). * src/factor.c (factor_using_squfof): Assert (only when linting due to performance) to avoid the implication of divide by zero. * src/od.c (read_block): Remove dead code. * src/tac.c (tac_seekable): Likewise. * src/ls.c (gobble_file): Likewise.
2015-04-30doc: standardize messages about the '-' stdin FILEPádraig Brady
* src/system.h (emit_stdin_note): A new function, refactoring the usage note about the '-' FILE implying stdin. * src/base64.c (usage): Use the new function to emit the note in a standard location and with standard separation. * src/cat.c (usage): Likewise. * src/csplit.c (usage): Likewise. * src/cut.c (usage): Likewise. * src/expand.c (usage): Likewise. * src/fmt.c (usage): Likewise. * src/head.c (usage): Likewise. * src/md5sum.c (usage): Likewise. * src/nl.c (usage): Likewise. * src/od.c (usage): Likewise. * src/paste.c (usage): Likewise. * src/pr.c (usage): Likewise. * src/ptx.c (usage): Likewise. * src/shred.c (usage): Likewise. * src/shuf.c (usage): Likewise. * src/sort.c (usage): Likewise. * src/sum.c (usage): Likewise. * src/tac.c (usage): Likewise. * src/tail.c (usage): Likewise. * src/tsort.c (usage): Likewise. * src/unexpand.c (usage): Likewise. * src/wc.c (usage): Likewise. * src/join.c (usage): Adjust the separation used for the message referring to FILE1 or FILE2 as stdin. * src/comm.c (usage): Add a message using the same wording (translation) as used in join. * src/split.c (usage): Reword to using FILE rather than INPUT, allowing use of emit_stdin_note(). Also remove the mention of "fixed-size" pieces as this isn't now always the case. Fixes http://pad.lv/1450179
2015-01-01maint: update all copyright year number rangesPádraig Brady
Run "make update-copyright" and then... * tests/sample-test: Adjust to use the single most recent year. * tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message, so that year is updated automatically in future.
2014-12-19diagnose too-large numbers betterPádraig Brady
Following on from commit v8.23-82-gaddae94, consistently diagnose numbers that are too large, so as to distinguish from other errors, and make the limits obvious. * gl/modules/xdectoint: A new module implementing xdecto[iu]max(), which handles the common case of parsing a bounded integer and exiting with a diagnostic on error. * gl/lib/xdectoimax.c: The signed variant. * gl/lib/xdectoint.c: The parameterized implementation. * gl/lib/xdectoint.h: The interface. * gl/lib/xdectoumax.c: The unsigned variant. * bootstrap.conf: Reference the new module. * cfg.mk (exclude_file_name_regexp--sc_require_config_h_first): Exclude the parameterized templates. * src/csplit.c: Output EOVERFLOW or ERANGE errors if appropriate. * src/fmt.c: Likewise. * src/fold.c: Likewise. * src/head.c: Likewise. * src/ls.c: Likewise. * src/nl.c: Likewise. * src/nproc.c: Likewise. * src/shred.c: Likewise. * src/shuf.c: Likewise. * src/stdbuf.c: Likewise. * src/stty.c: Likewise. * src/tail.c: Likewise. * src/truncate.c: Likewise. * src/split.c: Likewise. * src/pr.c: Likewise. * tests/pr/pr-tests.pl: Adjust to avoid matching errno diagnostic. * tests/fmt/base.pl: Likewise. * tests/split/l-chunk.sh: Likewise. * tests/misc/shred-negative.sh: Likewise. * tests/misc/tail.pl: Likewise. Also remove the redundant existing ERR_SUBST from test err-6. * tests/ls/hex-option.sh: Check HEX/OCT options. * tests/misc/shred-size.sh: Likewise. * tests/misc/stty-row-col.sh: Likewise.
2014-10-07wc: don't miscount /sys and similar file systemsPaul Eggert
Fix similar problems in head, od, split, tac, and tail. Reported by George Shuklin in: http://bugs.gnu.org/18621 * NEWS: Document this. * src/head.c (elseek): Move up. (elide_tail_bytes_pipe, elide_tail_lines_pipe): New arg CURRENT_POS. All uses changed. (elide_tail_bytes_file, elide_tail_lines_file): New arg ST and remove arg SIZE. All uses changed. * src/head.c (elide_tail_bytes_file): * src/od.c (skip): Avoid optimization for /sys files, where st_size is bogus and st_size == st_blksize. Don't report error at EOF when not optimizing. * src/head.c, src/od.c, src/tail.c: Include "stat-size.h". * src/split.c (input_file_size): New function. (bytes_split, lines_chunk_split, bytes_chunk_extract): New arg INITIAL_READ. All uses changed. Use it to double-check st_size. * src/tac.c (tac_seekable): New arg FILE_POS. All uses changed. (copy_to_temp): Return size of temp file. All uses changed. * src/tac.c (tac_seekable): * src/tail.c (tail_bytes): * src/wc.c (wc): Don't trust st_size; double-check by reading. * src/wc.c (wc): New arg CURRENT_POS. All uses changed. * tests/local.mk (all_tests): Add tests/misc/wc-proc.sh, tests/misc/od-j.sh, tests/tail-2/tail-c.sh. * tests/misc/head-c.sh: * tests/misc/tac-2-nonseekable.sh: * tests/split/b-chunk.sh: Add tests for problems with /proc and /sys files. * tests/misc/od-j.sh, tests/misc/wc-proc.sh, tests/tail-2/tail-c.sh: New files.
2014-09-19doc: output correct --help references with --program-prefixPádraig Brady
* src/system.h (emit_ancillary_info): Take the invariant PROGRAM_NAME as a parameter, so that consistent references are made to online docs and texinfo nodes, when a --program-prefix is in place. Note the man pages don't need this fix as they're generated before the program prefix is used. * NEWS: Mention the improvements in references to online documentation.
2014-09-08maint: prefer 'return status;' to 'exit (status);' in 'main'Paul Eggert
* build-aux/gen-single-binary.sh: Don't use ATTRIBUTE_NORETURN for main functions. * src/base64.c, src/basename.c, src/cat.c, src/chcon.c, src/chgrp.c: * src/chmod.c, src/chown.c, src/chroot.c, src/cksum.c, src/comm.c: * src/cp.c, src/csplit.c, src/cut.c, src/date.c, src/dd.c, src/df.c: * src/dircolors.c, src/dirname.c, src/du.c, src/echo.c, src/env.c: * src/expand.c, src/expr.c, src/factor.c, src/fmt.c, src/fold.c: * src/getlimits.c, src/groups.c, src/head.c, src/hostid.c: * src/hostname.c, src/id.c, src/install.c, src/join.c, src/kill.c: * src/link.c, src/ln.c, src/logname.c, src/ls.c, src/make-prime-list.c: * src/md5sum.c, src/mkdir.c, src/mkfifo.c, src/mknod.c, src/mktemp.c: * src/mv.c, src/nice.c, src/nl.c, src/nohup.c, src/nproc.c: * src/numfmt.c, src/od.c, src/paste.c, src/pathchk.c, src/pinky.c: * src/pr.c, src/printenv.c, src/printf.c, src/ptx.c, src/pwd.c: * src/readlink.c, src/realpath.c, src/rm.c, src/rmdir.c, src/runcon.c: * src/seq.c, src/shred.c, src/shuf.c, src/sleep.c, src/sort.c: * src/split.c, src/stat.c, src/stdbuf.c, src/stty.c, src/sum.c: * src/sync.c, src/tac.c, src/tail.c, src/tee.c, src/timeout.c: * src/touch.c, src/tr.c, src/true.c, src/truncate.c, src/tsort.c: * src/tty.c, src/uname.c, src/unexpand.c, src/uniq.c, src/unlink.c: * src/uptime.c, src/users.c, src/wc.c, src/who.c, src/whoami.c: In 'main' functions, Prefer 'return status;' to 'exit (status);'. * src/coreutils-arch.c (_single_binary_main_uname) (_single_binary_main_arch): * src/coreutils-dir.c, src/coreutils-vdir.c (_single_binary_main_ls) (_single_binary_main_dir, _single_binary_main_vdir): Omit ATTRIBUTE_NORETURN. Return a value. * src/coreutils.c (SINGLE_BINARY_PROGRAM): Omit ATTRIBUTE_NORETURN. (launch_program): Now static. * src/dd.c (finish_up): New function. (quit, main): Use it. * src/getlimits.c (main): Return a proper exit status. * src/test.c (test_main_return): New macro. (main): Use it. * src/logname.c, src/nohup.c, src/whoami.c: Use 'error' to simplify exit status in 'main' function. * src/yes.c (main): Use 'return' rather than 'error' to exit, so that GCC doesn't suggest ATTRIBUTE_NORETURN.
2014-04-02head: port to Darwin and use simpler seeksPaul Eggert
This removes an unportable assumption that if lseek succeeds, the file is capable of seeking. See: http://bugs.gnu.org/17145 * src/head.c (elseek): New function, for consistency in reporting lseek failures. (elide_tail_bytes_file, elide_tail_lines_seekable) (elide_tail_lines_file, head_lines, head): Use it. (elide_tail_bytes_file, elide_tail_lines_file): New args CURRENT_POS and SIZE. All uses changed. Don't bother invoking lseek, since we know the file's pos and size now. (elide_tail_bytes_file): Change a local from uintmax_t to off_t, since it fits. (head): Use lseek only on regular files, since its behavior on unseekable devices is implementation-defined. * NEWS: Document this.
2014-03-31head: fix bug with head -c-N when stdin is not at startPaul Eggert
* src/head.c (elide_tail_bytes_file): Fix typo in lseek invocation. * tests/misc/head-c.sh: Add test for this bug. * NEWS: Document this.
2014-02-09head,tail: consistently diagnose write errorsPádraig Brady
If we can't output more data, we should immediately diagnose the issue and exit rather than consuming all of input (in some cases). * src/tail.c (xwrite_stdout): Also diagnose the case where only some data is written. Also clearerr() to avoid the redundant less specific error from atexit (close_stdout); * src/head.c (xwrite_stdout): Copy this new function from tail, and use it to write all output. * tests/misc/head-write-error.sh: A new test to ensure we exit immediately on write error. * tests/local.mk: Reference the new test.
2014-02-09head: fix --lines=-0 outputting nothing if no newline at EOFАлексей Шилин
* src/head.c (elide_tail_lines_pipe): Just output all input in this case to avoid the issue and also avoid redundant '\n' processing. (elide_tail_lines_seekable): Likewise. * tests/misc/head-elide-tail.pl: Add tests for no '\n' at EOF. * NEWS: Mention the fix. Fixes http://bugs.gnu.org/16329
2014-01-02maint: update all copyright year number rangesBernhard Voelker
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2013-07-12head: avoid redundant allocations when reading empty filesPádraig Brady
* src/head.c (elide_tail_lines_file): For seekable empty files, or seekable files where the current offset is after the end of the file, return immediately. Previously the short circuit code could not be reached due to logic error. Spotted by coverity.
2013-04-14head: with --bytes=-N only allocate memory as neededPádraig Brady
* src/head.c (elide_tail_bytes_pipe): Don't use calloc as that bypasses memory overcommit due to the zeroing requirement. Also realloc rather than malloc the pointer array to avoid dependence on overcommit entirely. * tests/misc/head-c.sh: Add a test case. Fixes http://bugs.gnu.org/13530
2013-02-06maint: improve error messages upon failed read, write, access, closeBenno Schulenberg
Note we use "failed to {access,close}" for those single operations, and "error {read,writ}ing" for those partial operation failures. * src/copy.c: Improve error messages for failing read, write and close. * src/cp.c: Improve error messages for failing access. * src/dd.c: Improve error messages for failing read, write and open. * src/head.c: Improve error message for failing close. * src/install.c: Improve error messages for failing access. * src/ln.c: Likewise. * src/mv.c: Likewise. * src/touch.c: Improve error message for failing close. * src/truncate.c: Likewise.
2013-01-23maint: define usage note about mandatory args centrallyBernhard Voelker
Each program with at least one long option which is marked as 'required_argument' and which has also a short option for that option, should print a note about mandatory arguments. Define that well-known note centrally and use it rather than literal printf/fputs, and add it where it was missing. * src/system.h (emit_mandatory_arg_note): Add new function. * src/cp.c (usage): Use it rather than literal printf/fputs. * src/csplit.c, src/cut.c, src/date.c, src/df.c, src/du.c: * src/expand.c, src/fmt.c, src/fold.c, src/head.c, src/install.c: * src/kill.c, src/ln.c, src/ls.c, src/mkdir.c, src/mkfifo.c: * src/mknod.c, src/mv.c, src/nl.c, src/od.c, src/paste.c: * src/pr.c, src/ptx.c, src/shred.c, src/shuf.c, src/sort.c: * src/split.c, src/stdbuf.c, src/tac.c, src/tail.c, src/timeout.c: * src/touch.c, src/truncate.c, src/unexpand.c, src/uniq.c: Likewise. * src/base64.c (usage): Add call of the above new function because at least one long option has a required argument. * src/basename.c, src/chcon.c, src/date.c, src/env.c: * src/nice.c, src/runcon.c, src/seq.c, src/stat.c, src/stty.c: Likewise.
2013-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2012-06-05maint: mark new diagnostic for translationJim Meyering
* src/head.c (elide_tail_lines_seekable): Mark new diagnostic. I will look at the results of "make syntax-check", I will look...
2012-06-05head: with --lines=-N (-n-N) reset file pointer on seekable inputJim Meyering
* src/head.c (elide_tail_lines_seekable): Reset file pointer after printing up to an end-relative line-counted offset. Anoop Sharma reported the problem and suggested the fix. * tests/misc/head-pos: Add coverage via a very similar, existing test. Also add coverage for a previously untested block of code. * tests/misc/head-elide-tail ($READ_BUFSIZE): Update to 8192, to match the value of BUFSIZ I see today on Fedora 17/x86_64 (unrelated to this fix). * NEWS (Bug fixes): Mention it. Improved-by: Pádraig Brady
2012-01-27maint: use single copyright year rangeJim Meyering
Run "make update-copyright".
2012-01-09maint: src/*.[ch]: convert more `...' to '...'Jim Meyering
Run this (twice): git grep -E -l '`.+'\' src/*.[ch] \ |xargs perl -pi -e 's/`(.+?'\'')/'\''$1/'
2012-01-09maint: src/*.c: change remaining quotes (without embedded spaces)Jim Meyering
Run this (twice): git grep -E -l '`[^ ]+'\' src/*.c \ |xargs perl -pi -e 's/`([^ ]+'\'')/'\''$1/'
2012-01-09maint: convert `...' to '...' in --help outputJim Meyering
All affected lines end with \ or \n\, so run this command until it produces no new changes (4 times): git grep -E -l '`[^ ]+'\''.*\\' src \ |xargs perl -pi -e 's/`([^ ]+'\''.*\\)/'\''$1/'
2012-01-07maint: use new emit_try_help in place of equivalent fprintfJim Meyering
Run this command: perl -0777 -pi -e \ 's/fprintf \(stderr, _\("Try `%s --help.*\n.*;/emit_try_help ();/m'\ src/*.c
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-08-13maint: remove empty statement after jump labelBernhard Voelker
* src/head.c (elide_tail_bytes_pipe): Remove the empty statement, ";" after a jump label; it is needed only when a declaration follows. * src/kill.c (main): Likewise. * src/od.c (main): Likewise. * src/paste.c (collapse_escapes): Likewise. * src/printf.c (print_formatted): Likewise.
2011-06-09maint: remove unneeded includesPádraig Brady
Remove unneeded includes as reported by: http://code.google.com/p/include-what-you-use/ * src/cp-hash.c: Remove unused include. * src/dd.c: Likewise. * src/du.c: Likewise. * src/head.c: Likewise. * src/kill.c: Likewise. * src/ls.c: Likewise. * src/stdbuf.c: Likewise. * src/timeout.c: Likewise. * src/truncate.c: Likewise.
2011-05-28maint: remove useless (off_t) cast of lseek argJim Meyering
* src/wc.c (wc): Remove unnecessary cast. * src/head.c (elide_tail_bytes_file, elide_tail_lines_file): Likewise. * src/tac.c (tac_seekable, tac_file): Likewise.
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-06-08maint: adjust INT_BUFSIZE_BOUND usage for maintainabilityJim Meyering
* src/tail.c (xlseek): Give INT_BUFSIZE_BOUND a variable name, not a type name. * src/ls.c (gobble_file, format_user_or_group_width): Likewise. * src/head.c (elide_tail_bytes_pipe): Likewise. (elide_tail_lines_seekable, main): Likewise. [This change is not complete -- there are doubtless other uses that can be updated in the same way.]
2010-01-01maint: update all FSF copyright year lists to include 2010Jim Meyering
Use this command: git ls-files | grep -v COPYING \ | xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \ build-aux/update-copyright
2009-09-21doc: mention the texinfo documentation in --helpPádraig Brady
* src/system.h: Rename emit_bug_reporting_address() to emit_ancillary_info() and update it to not print the translation project address in en_* locales, and _do_ print it in the 'C' (and other) locales so that it's included in the default man page. Also mention how to invoke the texinfo documentation for each command. Also move the "hard-locale.h" include to the 8 files that now use it. * man/help2man: Strip the newly added texinfo reference from the --help output as a more verbose version is already added by help2man. Suggestion from C de-Avillez
2009-08-25global: convert indentation-TABs to spacesJim Meyering
Transformed via this shell code: t=$'\t' git ls-files \ | grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \ | grep -vE 'tests/pr/|help2man' \ | xargs grep -lE "^ *$t" \ | xargs perl -MText::Tabs -ni -le \ '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
2009-05-29head, tail: make --help less ambiguousEric Blake
* src/head.c (usage): Use -n K, not -n N, to avoid confusion. * src/tail.c (usage): Likewise. * doc/coreutils.texi (head invocation, tail invocation): Likewise. Reported by Christophe Lyon.
2008-11-10use xfreopen in place of unchecked freopenJim Meyering
* bootstrap.conf (modules): Add xfreopen. * src/cat.c (main): Include "xfreopen.h". Use xfreopen. * src/cksum.c (cksum): Likewise. * src/head.c (head_file, main): Likewise. * src/md5sum.c (digest_file): Likewise. * src/od.c (open_next_file): Likewise. * src/split.c (type_undef): Likewise. * src/sum.c (bsd_sum_file, sysv_sum_file): Likewise. * src/tac.c (tac_file, main): Likewise. * src/tail.c (tail_file, main): Likewise. * src/tee.c (tee_files): Likewise. * src/tr.c (main): Likewise. * src/wc.c (wc_file): Likewise. * po/POTFILES.in: Add lib/xfreopen.c
2008-06-27factor out time_t-to-string conversion idiomJim Meyering
* src/system.h: Include "inttostr.h". (timetostr): New function, factored out of... * src/date.c (show_date): Use timetostr. * src/du.c (show_date): Likewise. * src/ls.c (print_long_format): Likewise. * src/pinky.c (time_string): Likewise. * src/stat.c (human_time): Likewise. * src/*.c: Don't include inttostr.h, since system.h does. * src/c99-to-c89.diff: Adjust offsets.
2008-06-16remove redundant const directivesJim Meyering
In 1463824d8e7f72c31f1d803d7cfe2b608ccafc5c, I added some missing "const" directives, as well as some new, redundant ones. This removes the redundant ones. Pointed out by Eric Blake. * base64.c, cat.c, chcon.c, chgrp.c, chmod.c, chown.c, comm.c: * cp.c, csplit.c, cut.c, date.c, dd.c, df.c, dircolors.c, du.c: * env.c, expand.c, fmt.c, fold.c, groups.c, head.c, id.c: * install.c, join.c, kill.c, ln.c, ls.c, md5sum.c, mkdir.c: * mkfifo.c, mknod.c, mktemp.c, mv.c, nice.c, nl.c, od.c: * paste.c, pathchk.c, pinky.c, pr.c, ptx.c, readlink.c, rm.c: * rmdir.c, runcon.c, seq.c, shred.c, shuf.c, sort.c, split.c: * stat.c, stty.c, su.c, sum.c, tac.c, tail.c, tee.c, timeout.c: * touch.c, tr.c, truncate.c, tty.c, uname.c, unexpand.c, uniq.c: * wc.c, who.c: Remove redundant const directives. * maint.mk (sc_const_long_option): Don't require redundant "const".
2008-06-14add "const" attribute, where possibleJim Meyering
* maint.mk (sc_const_long_option): New rule. Enforce global change. * src/base64.c (long_options): Use "const" where possible. * src/cat.c (main): Likewise. * src/chcon.c (long_options): Likewise. * src/chgrp.c (long_options): Likewise. * src/chmod.c (long_options): Likewise. * src/chown.c (long_options): Likewise. * src/comm.c (long_options, OUTPUT_DELIMITER_OPTION): Likewise. * src/cp.c (long_opts): Likewise. * src/csplit.c (longopts): Likewise. * src/cut.c (longopts): Likewise. * src/date.c (long_options): Likewise. * src/dd.c (conversions, flags, statuses): Likewise. * src/df.c (long_options): Likewise. * src/dircolors.c (long_options): Likewise. * src/du.c (long_options): Likewise. * src/env.c (longopts): Likewise. * src/expand.c (longopts): Likewise. * src/fmt.c (long_options): Likewise. * src/fold.c (longopts): Likewise. * src/groups.c (longopts): Likewise. * src/head.c (long_options): Likewise. * src/id.c (longopts): Likewise. * src/install.c (long_options): Likewise. * src/join.c (longopts): Likewise. * src/kill.c (long_options): Likewise. * src/ln.c (long_options): Likewise. * src/ls.c (long_time_format, long_options, sort_functions): Likewise. * src/md5sum.c (long_options): Likewise. * src/mkdir.c (longopts): Likewise. * src/mkfifo.c (longopts): Likewise. * src/mknod.c (longopts): Likewise. * src/mktemp.c (longopts): Likewise. * src/mv.c (long_options): Likewise. * src/nice.c (longopts): Likewise. * src/nl.c (longopts): Likewise. * src/od.c (charname, long_options): Likewise. * src/paste.c (longopts): Likewise. * src/pathchk.c (longopts): Likewise. * src/pinky.c (longopts): Likewise. * src/pr.c (long_options): Likewise. * src/ptx.c (long_options): Likewise. * src/readlink.c (longopts): Likewise. * src/rm.c (long_opts): Likewise. * src/rmdir.c (longopts): Likewise. * src/runcon.c (long_options): Likewise. * src/seq.c (long_options): Likewise. * src/shred.c (long_opts): Likewise. * src/shuf.c (long_opts): Likewise. * src/sort.c (monthtab, long_options): Likewise. * src/split.c (longopts): Likewise. * src/stat.c (long_options): Likewise. * src/stty.c (mode_info, control_info, longopts, set_mode) Likewise. (set_control_char, speeds): Likewise. * src/su.c (longopts): Likewise. * src/sum.c (longopts): Likewise. * src/tac.c (longopts): Likewise. * src/tail.c (long_options): Likewise. * src/tee.c (long_options): Likewise. * src/timeout.c (long_options): Likewise. * src/touch.c (longopts): Likewise. * src/tr.c (long_options): Likewise. * src/truncate.c (longopts): Likewise. * src/tty.c (longopts): Likewise. * src/uname.c (uname_long_options, arch_long_options): Likewise. * src/unexpand.c (longopts): Likewise. * src/uniq.c (longopts): Likewise. * src/wc.c (longopts): Likewise. * src/who.c (longopts): Likewise.
2008-06-03use gnulib's progname moduleJim Meyering
* bootstrap.conf (gnulib_modules): Add progname. * src/*.c (program_name): Remove declaration. * (main): Call set_program_name rather than setting program_name. * src/nice.c (main): Cast program_name to "(char *)". * src/prog-fprintf.c: Include "system.h" * src/system.h: Include "progname.h". * maint.mk (sc_program_name): Adjust rule. Suggestion from Eric Blake.
2008-06-02declare program_name consistentlyJim Meyering
* src/base64.c: Likewise. * src/basename.c: Likewise. * src/cat.c: Likewise. * src/chcon.c: Likewise. * src/chgrp.c: Likewise. * src/chmod.c: Likewise. * src/chown.c: Likewise. * src/chroot.c: Likewise. * src/cksum.c: Likewise. * src/comm.c: Likewise. * src/cp.c: Likewise. * src/csplit.c: Likewise. * src/cut.c: Likewise. * src/date.c: Likewise. * src/dd.c: Likewise. * src/df.c: Likewise. * src/dircolors.c: Likewise. * src/dirname.c: Likewise. * src/du.c: Likewise. * src/echo.c: Likewise. * src/env.c: Likewise. * src/expand.c: Likewise. * src/expr.c: Likewise. * src/factor.c: Likewise. * src/fmt.c: Likewise. * src/fold.c: Likewise. * src/groups.c: Likewise. * src/head.c: Likewise. * src/hostid.c: Likewise. * src/hostname.c: Likewise. * src/id.c: Likewise. * src/install.c: Likewise. * src/join.c: Likewise. * src/kill.c: Likewise. * src/link.c: Likewise. * src/ln.c: Likewise. * src/logname.c: Likewise. * src/ls.c: Likewise. * src/md5sum.c: Likewise. * src/mkdir.c: Likewise. * src/mkfifo.c: Likewise. * src/mknod.c: Likewise. * src/mktemp.c: Likewise. * src/mv.c: Likewise. * src/nice.c: Likewise. * src/nl.c: Likewise. * src/nohup.c: Likewise. * src/od.c: Likewise. * src/paste.c: Likewise. * src/pathchk.c: Likewise. * src/pinky.c: Likewise. * src/pr.c: Likewise. * src/printenv.c: Likewise. * src/printf.c: Likewise. * src/ptx.c: Likewise. * src/pwd.c: Likewise. * src/readlink.c: Likewise. * src/rm.c: Likewise. * src/rmdir.c: Likewise. * src/runcon.c: Likewise. * src/seq.c: Likewise. * src/setuidgid.c: Likewise. * src/shuf.c: Likewise. * src/sleep.c: Likewise. * src/sort.c: Likewise. * src/split.c: Likewise. * src/stat.c: Likewise. * src/stty.c: Likewise. * src/su.c: Likewise. * src/sum.c: Likewise. * src/sync.c: Likewise. * src/tac.c: Likewise. * src/tail.c: Likewise. * src/tee.c: Likewise. * src/test.c: Likewise. * src/timeout.c: Likewise. * src/touch.c: Likewise. * src/tr.c: Likewise. * src/true.c: Likewise. * src/tsort.c: Likewise. * src/tty.c: Likewise. * src/uname.c: Likewise. * src/unexpand.c: Likewise. * src/uniq.c: Likewise. * src/unlink.c: Likewise. * src/uptime.c: Likewise. * src/users.c: Likewise. * src/wc.c: Likewise. * src/who.c: Likewise. * src/whoami.c: Likewise. * src/yes.c: Likewise.
2008-05-26adjust copyright datesJim Meyering
2008-05-26convert 2-author programs to use proper_nameJim Meyering
g grep -E -l 'define AUTHORS "[^,]+", "[^,]+"$'|xargs perl -pi -e \ 's/(define AUTHORS) ("[^,]+"), ("[^,]+")$/$1 \\\n proper_name ($2), \\\n proper_name ($3)/'
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
2007-07-10Change "version 2" to "version 3" in all copyright notices.Jim Meyering
2007-05-03The following commands and options now support the standard sizePaul Eggert
suffixes kB, M, MB, G, GB, and so on for T, P, Y, Z, and Y: head -c, head -n, od -j, od -N, od -S, split -b, split -C, tail -c, tail -n. * doc/coreutils.texi (od invocation, head invocation, tail invocation): Document support for new size suffixes. (head invocation, tail invocation): Document that -n uses the same suffixes as -c. (tail invocation): More-clearly document what leading "+" does. * src/head.c (usage, string_to_integer): Support new suffixes. * src/od.c (usage, main): Likewise. * src/split.c (usage, main): Likewise. * src/tail.c (usage, parse_options): Likewise. Prompted by a patch from Evan Hunt.
2007-03-28Help translators include translation team's web or email address.Jim Meyering
* src/system.h (emit_bug_reporting_address): New function. * src/base64.c: Use it rather than a literal printf. * src/basename.c, src/cat.c, src/chgrp.c, src/chmod.c: * src/chown.c, src/chroot.c, src/cksum.c, src/comm.c, src/cp.c: * src/csplit.c, src/cut.c, src/date.c, src/dd.c, src/df.c: * src/dircolors.c, src/dirname.c, src/du.c, src/echo.c, src/env.c: * src/expand.c, src/expr.c, src/factor.c, src/fmt.c, src/fold.c: * src/head.c, src/hostid.c, src/hostname.c, src/id.c, src/install.c: * src/join.c, src/kill.c, src/link.c, src/ln.c, src/logname.c: * src/ls.c, src/md5sum.c, src/mkdir.c, src/mkfifo.c, src/mknod.c: * src/mv.c, src/nice.c, src/nl.c, src/nohup.c, src/od.c: * src/paste.c, src/pathchk.c, src/pinky.c, src/pr.c, src/printenv.c: * src/printf.c, src/ptx.c, src/pwd.c, src/readlink.c, src/rm.c: * src/rmdir.c, src/seq.c, src/setuidgid.c, src/shred.c, src/shuf.c: * src/sleep.c, src/sort.c, src/split.c, src/stat.c, src/stty.c: * src/su.c, src/sum.c, src/sync.c, src/system.h, src/tac.c: * src/tail.c, src/tee.c, src/test.c, src/touch.c, src/tr.c: * src/true.c, src/tsort.c, src/tty.c, src/uname.c, src/unexpand.c: * src/uniq.c, src/unlink.c, src/uptime.c, src/users.c, src/wc.c: * src/who.c, src/whoami.c, src/yes.c: Likewise.
2006-01-31(main): Use a better diagnostic when someone uses aPaul Eggert
trailing numeric option in an invalid way.
2005-12-03(long_options): Change the name of each undocumented, for-Jim Meyering
testing-only option to start with `-', so that it cannot render ambiguous any prefix it happens to share with some other option name.