summaryrefslogtreecommitdiff
path: root/src/factor.c
AgeCommit message (Collapse)Author
2016-01-01maint: update all copyright year number rangesPádraig Brady
Run "make update-copyright" and then... * gnulib: Update to latest with copyright year adjusted. * tests/init.sh: Sync with gnulib to pick up copyright year. * bootstrap: Likewise. * tests/sample-test: Adjust to use the single most recent year.
2015-12-14maint: fix incorrect spellings etcPádraig Brady
* NEWS: Use a standard version specification. * doc/coreutils.texi: Fix incorrect grammar. * src/df.c: Update a stale comment. * src/copy.c: Fix incorrect spellings. * src/factor.c: Likewise. * src/ls.c: Likewise. * src/pr.c: Likewise. * src/relpath.c: Likewise. * src/shred.c: Likewise. * src/sort.c: Likewise. * src/split.c: Likewise. * src/stdbuf.c: Likewise. * tests/misc/seq-precision.sh: Likewise.
2015-10-27copy,dd: simplify and optimize NUL bytes detectionPádraig Brady
* src/factor.c: Move LIKELY() definition to... * src/system.h: ...here. (is_nul): Reimplement with a version that doesn't require a sentinel after the buffer, and which calls down to (the system optimized) memcmp. Performance analyzed at http://rusty.ozlabs.org/?p=560 * src/dd.c (alloc_obuf): Simplify the is_nul() call by not needing to write the sentinel. * src/copy.c (sparse_copy): Likewise. (copy_reg): Simplify the buffer allocation by avoiding consideration of the sentinel in the buffer size calculation.
2015-10-19factor: remove unreachable SQUFOF code at compile timePádraig Brady
It was a little confusing as to whether the SQUFOF algorithm was enabled, and in fact there were no options available to enable it. Therefore clarify the 3 configurable behaviors for the code to 3 defines at the top of the program, and only include the SQUFOF code if enabled at compile time. $ size src/factor-before text data bss 93997 1412 2504 $ size src/factor-after text data bss 87885 1404 2504 * src/factor.c: Only include the SQUFOF factor code when enabled via the USE_SQUFOF define. * doc/coreutils.texi (factor invocation): Update note about factor limits, as we can factor 128 bit numbers without GMP.
2015-07-01factor: ensure atomic output through pipesPádraig Brady
The new tests/misc/factor-parallel.sh test was seen to fail on FreeBSD (derived) systems, which was due to split(1) --filter reading partial lines through pipes, as factor(1) was writing a little over PIPE_BUF each time. * src/factor.c (lbuf): A new structure to internally buffer lines. (lbuf_alloc): A new function to allocate enough at program start. (lbuf_putint): A new function to buffer a uintmax_t. (lbuf_flush): A new function to write directly to standard output. (lbuf_putc): A new function to buffer a character and if enough lines are buffered, then output complete lines <= PIPE_BUF, and continue to buffer the rest. (main): Call the internal buffer allocator, and register the final flush from the internal buffer at program exit.
2015-06-25maint: clarify integer operations in recent commitPádraig Brady
* src/factor.c (print_uintmaxes): Comment that the value of n_out doesn't matter on error, and add an explicit cast to avoid any future warnings. Suggested by Jim Meyering RE commit v8.23-229-g4d2d6c5
2015-06-24factor: avoid interspersed lines for parallel runsPádraig Brady
* src/factor.c (n_out): A new global variable to track how much data has been written to stdout. (print_factors_single): Use n_out to determine whether to flush the current (and previous) lines. * tests/misc/factor-parallel.sh: Add a new test. * tests/local.mk: Reference the new test. * NEWS: Mention the bug fix.
2015-05-30maint: avoid new coverity warningsPádraig Brady
* src/sync.c (sync_arg): Initialise variable to avoid unitialized access if assert is disabled. * src/head.c (elide_tail_bytes_file): Support this function with ---presume-input-pipe and larger files, which regressed with commit v8.23-47-g2662702. (elide_tail_lines_file): Likewise. * src/dd.c (dd_copy): Explicitly don't try to ftruncate() upon failure to lseek() (the existing check against st_size was already protecting that). * src/factor.c (factor_using_squfof): Assert (only when linting due to performance) to avoid the implication of divide by zero. * src/od.c (read_block): Remove dead code. * src/tac.c (tac_seekable): Likewise. * src/ls.c (gobble_file): Likewise.
2015-04-27maint: fix printf format for signed integersPádraig Brady
With GCC 5 and the newly added warnings from gnulib, ensure the correct signed integer is passed for the printf format, to avoid -Werror=format= failures.
2015-01-01maint: update all copyright year number rangesPádraig Brady
Run "make update-copyright" and then... * tests/sample-test: Adjust to use the single most recent year. * tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message, so that year is updated automatically in future.
2014-09-19doc: output correct --help references with --program-prefixPádraig Brady
* src/system.h (emit_ancillary_info): Take the invariant PROGRAM_NAME as a parameter, so that consistent references are made to online docs and texinfo nodes, when a --program-prefix is in place. Note the man pages don't need this fix as they're generated before the program prefix is used. * NEWS: Mention the improvements in references to online documentation.
2014-09-08maint: prefer 'return status;' to 'exit (status);' in 'main'Paul Eggert
* build-aux/gen-single-binary.sh: Don't use ATTRIBUTE_NORETURN for main functions. * src/base64.c, src/basename.c, src/cat.c, src/chcon.c, src/chgrp.c: * src/chmod.c, src/chown.c, src/chroot.c, src/cksum.c, src/comm.c: * src/cp.c, src/csplit.c, src/cut.c, src/date.c, src/dd.c, src/df.c: * src/dircolors.c, src/dirname.c, src/du.c, src/echo.c, src/env.c: * src/expand.c, src/expr.c, src/factor.c, src/fmt.c, src/fold.c: * src/getlimits.c, src/groups.c, src/head.c, src/hostid.c: * src/hostname.c, src/id.c, src/install.c, src/join.c, src/kill.c: * src/link.c, src/ln.c, src/logname.c, src/ls.c, src/make-prime-list.c: * src/md5sum.c, src/mkdir.c, src/mkfifo.c, src/mknod.c, src/mktemp.c: * src/mv.c, src/nice.c, src/nl.c, src/nohup.c, src/nproc.c: * src/numfmt.c, src/od.c, src/paste.c, src/pathchk.c, src/pinky.c: * src/pr.c, src/printenv.c, src/printf.c, src/ptx.c, src/pwd.c: * src/readlink.c, src/realpath.c, src/rm.c, src/rmdir.c, src/runcon.c: * src/seq.c, src/shred.c, src/shuf.c, src/sleep.c, src/sort.c: * src/split.c, src/stat.c, src/stdbuf.c, src/stty.c, src/sum.c: * src/sync.c, src/tac.c, src/tail.c, src/tee.c, src/timeout.c: * src/touch.c, src/tr.c, src/true.c, src/truncate.c, src/tsort.c: * src/tty.c, src/uname.c, src/unexpand.c, src/uniq.c, src/unlink.c: * src/uptime.c, src/users.c, src/wc.c, src/who.c, src/whoami.c: In 'main' functions, Prefer 'return status;' to 'exit (status);'. * src/coreutils-arch.c (_single_binary_main_uname) (_single_binary_main_arch): * src/coreutils-dir.c, src/coreutils-vdir.c (_single_binary_main_ls) (_single_binary_main_dir, _single_binary_main_vdir): Omit ATTRIBUTE_NORETURN. Return a value. * src/coreutils.c (SINGLE_BINARY_PROGRAM): Omit ATTRIBUTE_NORETURN. (launch_program): Now static. * src/dd.c (finish_up): New function. (quit, main): Use it. * src/getlimits.c (main): Return a proper exit status. * src/test.c (test_main_return): New macro. (main): Use it. * src/logname.c, src/nohup.c, src/whoami.c: Use 'error' to simplify exit status in 'main' function. * src/yes.c (main): Use 'return' rather than 'error' to exit, so that GCC doesn't suggest ATTRIBUTE_NORETURN.
2014-08-22maint: avoid int64_t and similar types unless they're neededPaul Eggert
C11 doesn't require them, even POSIX doesn't strictly require the 64-bit versions, and it makes the code a bit clearer if they're used only when needed. * src/copy.c (write_zeros, extent_copy): * src/extent-scan.h (struct extent_info.ext_length): Use off_t, not uint64_t, for a value derived from a file offset. * src/extent-scan.h (struct extent_info.ext_flags) Prefer plain unsigned int to uint32_t where either will do. (struct extent_scan.ei_count): Use size_t, not uint32_t, for a value bounded by SIZE_MAX. * src/factor.c (MAGIC64, MAGIC63, MAGIC65): Remove unnecessary casts to uint64_t.
2014-05-02numfmt: improve processing throughput by 800%Pádraig Brady
The devmsg() calls that took quote_n() arguments, didn't normally output anything, but still incurred the overhead of those quote_n() calls. * src/numfmt.c (devmsg): Move the inline function with _internal_ enablement check to... * src/system.h: ...here as a variadic macro, with the enablement check at the outer level. * src/factor.c: As per numfmt.c but there is no performance change in this case. * NEWS: Mention the significant performance improvement.
2014-01-02maint: update all copyright year number rangesBernhard Voelker
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2013-02-20maint: cleanup up various uses of __attribute__Pádraig Brady
* src/cfg.mk (sc_prohibit-gl-attributes): Disallow the __attribute() form without trailing underscores as that is not elided where required. Also ensure we use gnulib macros rather than defining our own. * src/system.h: Remove gnulib provided macros. * src/chown-core.c: Likewise. * src/chroot.c: Likewise. * src/copy.c: Likewise. * src/csplit.c: Likewise. * src/dd.c: Likewise. * src/expr.c: Likewise. * src/extent-scan.c: Likewise. * src/factor.c: Likewise. * src/ls.c: Likewise. * src/od.c: Likewise. * src/paste.c: Likewise. * src/ptx.c: Likewise. * src/sort.c: Likewise. * src/stat.c: Likewise. * src/stty.c: Likewise. * src/system.h: Likewise. * src/tac.c: Likewise. * src/test.c: Likewise. * src/tsort.c: Likewise.
2013-02-14build: avoid link failure in devmsg() on older linkersPádraig Brady
On linkers that don't remove unused functions, there will be a reference to a missing dev_debug symbol in the devmsg() function. So for now ... * src/system.h: ... move devmsg() from here ... * src/numfmt.c: ... to here, and document future cleanup. * src/factor.c: Likewise.
2013-02-10maint: consolidate developer debug messagesPádraig Brady
Both factor and numfmt recently introduced debug messages for developers, enabled by --verbose and ---devdebug respectively. There were a few issues though: 1. They used different mechanisms to enable these messages. 2. factor used --verbose which might be needed for something else 3. They used different methods to output the messages, and numfmt used error() which added an unwanted newline 4. numfmt marked all these messages for translation and factor marked a couple. We really don't need these translated. So we fix the above issues here while renaming the enabling option for both commands to ---debug (still undocumented). * src/factor.c (verbose): Rename to dev_debug and change from int to bool as it's just a toggle flag. (long_options): Rename --verbose to ---debug. * src/system.h (devmsg): A new inline function to output a message if enabled by a global dev_debug variable in the compilation unit. * src/numfmt.c: Use devmsg() rather than error(). Also remove the translation tags from these messages. Also change debug flag to bool from int. * tests/misc/numfmt.pl: Adjust for the ---devdebug to ---debug change. * cfg.mk (sc_marked_devdiagnostics): Add a syntax check to ensure translations are not added to devmsg calls. Reported by Göran Uddeborg in http://bugs.gnu.org/13665
2013-01-07factor: apply a more general fix to enable correct assemblyPádraig Brady
In addition to the previous 64 bit guards we've placed in longlong.h there are additional _LP64 guards required for mips with -mcpu >= 3, to avoid a build failure (http://bugs.gnu.org/13353) and on sparc with -mcpu >= v9 in 32 bit mode where for example, `factor 2123123123123123123123` would go into an infinite loop. Since factor.c currently operates on uintmax_t, we restrict the use of the assembly in longlong.h to when 'long' has the same width, to provide a more general guard for this code. * src/factor.c: Restrict the use of longlong.h assembly code, to when the width of intmax_t == long. * src/longlong.h: Remove the previous _LP64 guards to avoid divergence from GMP's longlong.h * NEWS: Adjust the info on build and runtime fixes.
2013-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright", but then also run this, perl -pi -e 's/2\d\d\d-//' tests/sample-test to make that one script use the single most recent year number.
2012-12-04maint: remove a redundant odd sized alloc from factor.cPádraig Brady
* src/factor.c (mp_factor_init): Init the pointers with NULL, which xrealloc (or realloc) handles fine.
2012-11-18build: fix compilation failure on x32Daniel Schepler
* src/factor.c [HAVE_ATTRIBUTE_MODE]: Fix typo in #if test: s/HAVE_LONG_LONG/HAVE_LONG_LONG_INT/. Otherwise, factor.c would elicit assembler errors on x32: it was incorrectly defining DItype to long instead of long long. Patch and report in http://bugs.debian.org/693337; Mike Stone notified upstream.
2012-11-18maint: correct indentation of W_TYPE_SIZE-defining cpp directivesJim Meyering
* src/factor.c: Indent cpp directives to reflect their nesting.
2012-11-13maint: avoid unnecessary #include to fix syntax-check failureJim Meyering
* src/factor.c: Remove unneeded #inclusion of"verify.h". It's already included via system.h.
2012-11-12factor: maintainer builds primes.h, not builderPaul Eggert
With this change, the maintainer builds primes.h and it is part of the tarball. primes.h's contents are not architecture-specific. * .gitignore: Remove /src/primes.h. * src/factor.c: Include verify.h. (W): New constant. Verify that uintmax_t lacks holes and that W is no wider than the integers used to generate primes.h. * src/local.mk (EXTRA_DIST): Add src/primes.h. (BUILT_SOURCES, CLEANFILES): Remove src/primes.h. ($(top_srcdir)/src/primes.h): Rename from src/primes.h. Do not depend on src/make-prime-list. Instead, use sub-make to build, so that we build primes.h only if it does not exist. * src/make-prime-list.c: Include <limits.h>, for ULONG_MAX. (wide_uint): Define to uintmax_t or unsigned __int128 if not #defined. (struct prime, binvert, process_prime): Use it instead of uintmax_t. (print_wide_uint): New function. This generates the proper pinv value regardless of the width of uintmax_t on the target, so long as the width doesn't exceed that of the width of wide_uint on the maintainer host that generated src/primes.h. (output_primes): Use it. Output WIDE_UINT_BITS, too. Let the target compute its own lim, since its uintmax_t may be narrower than ours. (SZ): Remove. * src/primes.h: New file, generated with 128-bit integers and usable on any host where uintmax_t's width is no greater than 128 bits.
2012-11-04build: don't assume uintmax_t is 64 bitsPádraig Brady
This was not seen to be an issue in practise, but to make the code more robust, don't assume uintmax_t is 64 bits. * src/factor.c (W_TYPE_SIZE): Define based on integer limits. * src/make-prime-list.c (output_primes): Define format width based on integer limits.
2012-11-04build: don't rely on support for '%j' printf formatPádraig Brady
* src/factor.c (print_uintmaxes): Replace with PRIuMAX. * src/join.c (check_order): Likewise. * cfg.mk (sc_check-j-printf-format): Add a syntax-check rule to flag new cases of this.
2012-10-23factor: add commentsJim Meyering
* src/factor.c (is_square): Use active voice in comment, not passive. (factor): Add function-describing comment. (mp_factor): Likewise.
2012-10-23build: avoid warnings about unused variables and macrosPádraig Brady
src/factor.c (__GMP_DECLSPEC): Move back from longlong.h to treat consistently with other stub macros. (__GMP_GNUC_PREREQ): Reference to avoid -Wunused-macros warning. (__GMP_DECLSPEC): Likewise. (ASSERT): Likewise. (__clz_tab): Likewise. (factor_using_division): Mark a variable as unused. (mulredc): Likewise. (mulredc2): Likewise. (divexact_21): Likewise.
2012-10-23build: avoid compile warnings in factor.c on some systemsPádraig Brady
* src/factor.c (factor_using_pollard_rho2): On some systems (like sparc) we need to promote all addmod2() parameters to uintmax_t to avoid warnings.
2012-10-09factor: fix integer validation and GMP fallbackPádraig Brady
In the recent factor rewrite, the GMP code wasn't actually used; just an error was printed on integer overflow. While fixing that it was noticed that correct input validation wasn't done in all cases when falling back to the GMP code. * src/factor.c (print_factors) Fallback to GMP on overflow. (strto2uintmax): Scan the string for invalid characters, so that case can be detected independently of overflow. Return an error when an empty string is passed. Also allow leading spaces and '+' in input numbers. * tests/misc/factor.pl: Ensure the GMP code is exercised when compiled in. Also add a test to verify leading spaces and '+' are allowed.
2012-10-08build: support older GMP versionsPádraig Brady
The new factor code introduced usage of mpz_inits() and mpz_clears(), which are only available since GMP >= 5, and will result in a compile error when missing. * m4/gmp.m4 (cu_GMP): Define HAVE_DECL_MPZ_INITS appropriately. * src/factor (mpz_inits): New function, defined where missing. (mpz_clears): Likewise.
2012-10-07maint: avoid warning from gcc's -Wunused-macrosJim Meyering
On some systems, -Wunused-macros would warn about two macros: src/factor.c:148:0: warning: macro "__clz_tab" is not used src/factor.c:126:0: warning: macro "UHWtype" is not used * src/factor.c: Add a use to placate gcc.
2012-10-04factor: 25% speed-up, on outputJim Meyering
* src/factor.c (print_factors_single): Use fputs and umaxtostr rather than printf with "%ju". This reduced the time required to compute and print the factors of the first 10^7 integers from over 8 seconds to 5.75s. Run this command: seq $((10**7)) | env time factor > /dev/null
2012-10-04factor: merge with preexisting factor; integrate tests; avoid warningsJim Meyering
* src/factor.c: Renamed from factor-ng.c, with the following changes: Adjust copyright header to be consistent with others. Use xmalloc and xrealloc, to avoid segv upon OOM. Switch back to using readtokens to handle input. Diagnose invalid inputs. s/fprintf+exit/error/ (print_factors): Add comments. (strto2uintmax): Return strtol_error, not int. (read_item): Remove, no longer used. (main): Use atexit(close_stdout) so that we don't ignore failed write. * cfg.mk: Exempt src/longlong.h from several tests. Exempt run.sh from the test-list-consistency test. Exempt make-prime-list.c from numerous tests, since we won't be making it conform: it must not link with libcoreutils.a. Exempt factor-ng.c from the no-upper-case error message test. * AUTHORS (factor): Add Torbjörn and Niels. * tests/local.mk (factor_tests): Encode the 37 tests. ($(factor_tests)): Rule to generate a test script for each test. * tests/factor/run.sh: New script, marked as very expensive. * .gitignore: Ignore new generated files. * src/local.mk (src/primes.h): New rule. (noinst_PROGRAMS): Add make-prime-list. (noinst_HEADERS): Add longlong.h. Remove all wheel-related rules and files. * src/wheel-gen.pl: Remove file. maint: mark set-but-not-used variables with ATTRIBUTE_UNUSED * src/factor-ng.c (redcify, prime_p, isqrt2): Mark them, so we don't have to disable -Wunused-but-set-variable. maint: use __builtin_expect only if __GNUC__ * src/factor-ng.c (LIKELY, UNLIKELY) [__GNUC__]: Add #ifdef guard. build: avoid warning about unused macro * src/factor-ng.c (__GMP_DECLSPEC): Don't define here * src/longlong.h (__GMP_DECLSPEC): Define if not already defined.
2012-09-07factor: don't ever declare composites to be primeTorbjörn Granlund
The multiple-precision factoring code (with HAVE_GMP) was copied from a now-obsolete version of GMP that did not pass proper arguments to the mpz_probab_prime_p function. It makes that code perform no more than 3 Miller-Rabin tests only, which is not sufficient. A Miller-Rabin test will detect composites with at least a probability of 3/4. For a uniform random composite, the probability will actually be much higher. Or put another way, of the N-3 possible Miller-Rabin tests for checking the composite N, there is no number N for which more than (N-3)/4 of the tests will fail to detect the number as a composite. For most numbers N the number of "false witnesses" will be much, much lower. Problem numbers are of the form N=pq, p,q prime and (p-1)/(q-1) = s, where s is a small integer. (There are other problem forms too, involving 3 or more prime factors.) When s = 2, we get the 3/4 factor. It is easy to find numbers of that form that cause coreutils' factor to fail: 465658903 2242724851 6635692801 17709149503 17754345703 20889169003 42743470771 54890944111 72047131003 85862644003 98275842811 114654168091 117225546301 ... There are 9008992 composites of the form with s=2 below 2^64. With 3 Miller-Rabin tests, one would expect about 9008992/64 = 140766 to be invalidly recognized as primes in that range. * src/factor.c (MR_REPS): Define to 25. (factor_using_pollard_rho): Use MR_REPS, not 3. (print_factors_multi): Likewise. * THANKS.in: Remove my name, now that it will be automatically included in the generated THANKS file.
2012-01-27maint: use single copyright year rangeJim Meyering
Run "make update-copyright".
2012-01-09maint: src/*.c: change remaining quotes (without embedded spaces)Jim Meyering
Run this (twice): git grep -E -l '`[^ ]+'\' src/*.c \ |xargs perl -pi -e 's/`([^ ]+'\'')/'\''$1/'
2012-01-07maint: use new emit_try_help in place of equivalent fprintfJim Meyering
Run this command: perl -0777 -pi -e \ 's/fprintf \(stderr, _\("Try `%s --help.*\n.*;/emit_try_help ();/m'\ src/*.c
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-05-26maint: accommodate gcc's -Wstrict-overflow optionJim Meyering
* src/factor.c (factor_using_pollard_rho): Change type of "i" to unsigned to avoid warning from gcc's -Wstrict-overflow. * src/expr.c: Use an unsigned intermediate. * src/dircolors.c (main): Reorder operations to avoid the risk of pointer overflow. * src/tr.c (squeeze_filter): Change NOT_A_CHAR from an anonymous "enum" to an "int", to avoid this warning: tr.c:1624:10: error: assuming signed overflow does not occur when simplifying conditional to constant [-Werror=strict-overflow] * src/pr.c (main): Make index "i" unsigned.
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-05-31maint: replace each "for (;;)" with "while (true)"Jim Meyering
Run this command: git ls-files | grep '\.[ch]$' \ | xargs perl -pi -e 's/for \(;;\)/while (true)/g' ...except for randint.c, which does not include stdbool.h. In that case, use "while (1)". * gl/lib/randint.c (randint_genmax): Use "while (1)" for infloops. * src/cat.c (simple_cat, cat): Use "while (true)" for infloops. * gl/lib/randread.c (readsource, readisaac): Likewise. * src/copy.c (copy_reg): Likewise. * src/csplit.c (record_line_starts, process_regexp): Likewise. * src/cut.c (set_fields): Likewise. * src/dd.c (iread, parse_symbols): Likewise. * src/df.c (find_mount_point, main): Likewise. * src/du.c (main): Likewise. * src/expand.c (expand): Likewise. * src/factor.c (factor_using_division, do_stdin): Likewise. * src/fmt.c (get_space): Likewise. * src/ls.c (decode_switches): Likewise. * src/od.c (main): Likewise. * src/pr.c (main, read_line): Likewise. * src/shred.c (dopass, genpattern): Likewise. * src/sort.c (initbuf, fillbuf, getmonth, keycompare): Likewise. * src/split.c (bytes_split, lines_split): Likewise. * src/tac.c (tac_seekable): Likewise. * src/test.c (and, or): Likewise. * src/tr.c (squeeze_filter, main): Likewise. * src/tsort.c (search_item): Likewise. * src/unexpand.c (unexpand): Likewise. * src/uniq.c (main): Likewise. * src/yes.c (main): Likewise.
2010-01-01maint: update all FSF copyright year lists to include 2010Jim Meyering
Use this command: git ls-files | grep -v COPYING \ | xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \ build-aux/update-copyright
2009-12-12factor: add a missing va_endJim Meyering
* src/factor.c (debug): Add missing va_end.
2009-10-08maint: use X2NREALLOC in more placesEric Blake
* src/chroot.c (set_additional_groups): Use X2NREALLOC rather than x2nrealloc. * src/factor.c (emit_factor): Likewise. * src/setuidgid.c (main): Likewise.
2009-09-21doc: mention the texinfo documentation in --helpPádraig Brady
* src/system.h: Rename emit_bug_reporting_address() to emit_ancillary_info() and update it to not print the translation project address in en_* locales, and _do_ print it in the 'C' (and other) locales so that it's included in the default man page. Also mention how to invoke the texinfo documentation for each command. Also move the "hard-locale.h" include to the 8 files that now use it. * man/help2man: Strip the newly added texinfo reference from the --help output as a more verbose version is already added by help2man. Suggestion from C de-Avillez
2009-09-13maint: use consistent cpp indentation in all .c filesJim Meyering
* src/stty.c: Make cpp indentation reflect nesting. * src/factor.c: Likewise.
2009-08-25global: convert indentation-TABs to spacesJim Meyering
Transformed via this shell code: t=$'\t' git ls-files \ | grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \ | grep -vE 'tests/pr/|help2man' \ | xargs grep -lE "^ *$t" \ | xargs perl -MText::Tabs -ni -le \ '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
2009-05-17maint: use ARRAY_CARDINALITY moreJim Meyering
* src/sort.c (main): Use ARRAY_CARDINALITY, rather than open-coding it. * src/factor.c (WHEEL_END): Likewise. * src/csplit.c (main): Likewise. * src/od.c: Likewise, * src/ls.c (main): Likewise. (N_ENTRIES): Remove definition. Use ARRAY_CARDINALITY instead. * src/dircolors.c: Likewise. (array_len): Remove definition.