| Age | Commit message (Collapse) | Author |
|---|
|
This pacifies GCC 5 in a better way, without disabling diagnostics.
* src/df.c (main): Tell compiler that optind is positive.
* src/shred.c (known): New function.
(dopass): Go back to off_t for file sizes.
Avoid integer overflow if we run off the end of the file.
Tell compiler that a write cannot write more bytes than requested.
|
|
In the presence of bind mounts of a device, the 4th "mount root" field
from /proc/self/mountinfo is now considered, so as to prefer mount
points closer to the root of the device. Note on older systems with
an /etc/mtab file, the source device was listed as the originating
directory, and so this was not an issue.
Details at http://pad.lv/1432871
* src/df.c (filter_mount_list): When deduplicating mount entries,
only prefer sources nearer or at the root of the device, when the
target is nearer the root of the device.
* NEWS: Mention the change in behavior.
|
|
* src/df.c (filter_mount_list): Clarify why we still stat even
though devices IDs may already be available. Note using
/proc/self/mountinfo is still an advantage to get filtered items
with accurate device patchs in chroots and with bind mounts.
I.E. on older setups with static /etc/mtab, df will now
bypass that to get the more accuracte and dynamic info.
|
|
* src/df.c (filter_mount_list): With -l, avoid stating remote mounts.
* init.cfg: Avoid test hangs with inaccessible remote mounts.
* tests/df/no-mtab-status.sh: Skip with inaccessible remote mounts.
* tests/df/skip-rootfs.sh: Likewise.
* tests/df/total-verify.sh: Likewise.
* NEWS: Mention the bug fix.
Reported at http://bugzilla.redhat.com/1199679
|
|
Conditional jump or move depends on uninitialised value(s)
at 0x40380C: get_field_values (df.c:840)
by 0x403E16: get_dev (df.c:994)
by 0x404D65: get_all_entries (df.c:1364)
by 0x405926: main (df.c:1714)
* src/df.c (get_dev): Initialize the fsu.fsu_bavail_top_bit_set
member, when adding placeholder entries.
(main): Avoid a "definitely lost" memory leak warning from valgrind,
reported by Bernhard Voelker.
|
|
To align with all other places (and correct grammar), change all
upper-case "I.E." to "I.e.". Furthermore, ensure that "i.e." is
followed by a comma. Finally, ensure to use a double-space before
"I.e.," at the beginning of a sentence.
The following was used to change all offending uses (apart from
old ChangeLog files):
$ git grep -liF 'i.e.' \
| xargs sed -i \
-e 's/I\.E\./I.e./g' \
-e 's/\. \(I\.e\.\)/. \1/g' \
-e 's/\([Ii]\.e\.\)\( \)/\1,\2/g' \
-e 's/\([Ii]\.e\.\)$/\1,/g'
* cfg.mk (sc_prohibit_uppercase_id_est): Add new rule.
(sc_ensure_double_space_after_dot_before_id_est): Likewise.
(sc_ensure_comma_after_id_est): Likewise.
(old_NEWS_hash): Refresh hash via "make update-NEWS-hash".
* NEWS: Change use of "id est" abbreviation via the above command.
* README: Likewise.
* README-prereq: Likewise.
* doc/coreutils.texi: Likewise.
* gl/lib/rand-isaac.c: Likewise.
* gl/lib/tempname.c.diff: Likewise.
* man/stdbuf.x: Likewise.
* src/cat.c: Likewise.
* src/copy.c: Likewise.
* src/copy.h: Likewise.
* src/cp.c: Likewise.
* src/cut.c: Likewise.
* src/dd.c: Likewise.
* src/df.c: Likewise.
* src/fiemap.h: Likewise.
* src/longlong.h: Likewise.
* src/ls.c: Likewise.
* src/numfmt.c: Likewise.
* src/pr.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/split.c: Likewise.
* tests/Coreutils.pm: Likewise.
* tests/df/df-symlink.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/init.sh: Likewise.
* tests/ls/color-norm.sh: Likewise.
* tests/misc/basename.pl: Likewise.
* tests/misc/ls-misc.pl: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/shred-exact.sh: Likewise.
* tests/misc/sort.pl: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
|
|
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
|
|
* src/df.c (filter_mount_list): Separate remote locations are
generally explicitly mounted, so list each even if they share
the same remote device and thus storage. However with --total
keep the suppression to give a more accurate value for the
total storage available.
(usage): Expand on the new implications of --total and move
it in the options list according to alphabetic order.
doc/coreutils.texi (df invocation): Mention that --total impacts
on deduplication of remote file systems and also move location
according to alphabetic order.
* tests/df/skip-duplicates.sh: Add remote test cases.
* NEWS: Mention the change in behavior.
Reported in http://bugs.debian.org/737399
Reported in http://bugzilla.redhat.com/920806
Reported in http://bugzilla.opensuse.org/866010
Reported in http://bugzilla.opensuse.org/901905
|
|
commit v8.22-125-g9d736f8 printed placeholder "-" values
for device names that didn't match the preferred device name
for a particular mount point. However that was seen to erroneously
suppress values for aliased host names or exports, common with
remote file systems.
* src/df.c (me_for_dev): Rename from devname_for_dev() so that
we can determine the remoteness as well as the name for the
preferred mount entry.
(get_dev): Don't output place holder values when both
current and preferred mount entries are remote.
Reported in http://bugs.debian.org/737399
|
|
* src/df.c (usage): Mention that duplicate file systems are shown
with this option, not just dummy file systems.
* doc/coreutils.texi (df invocation): For the --all option, expand
on the class of normally suppressed mount entries that it includes.
Reported in http://bugs.debian.org/737399
|
|
* src/system.h (emit_ancillary_info): Take the invariant PROGRAM_NAME
as a parameter, so that consistent references are made to online docs
and texinfo nodes, when a --program-prefix is in place. Note the
man pages don't need this fix as they're generated before the program
prefix is used.
* NEWS: Mention the improvements in references to online documentation.
|
|
* build-aux/gen-single-binary.sh: Don't use ATTRIBUTE_NORETURN
for main functions.
* src/base64.c, src/basename.c, src/cat.c, src/chcon.c, src/chgrp.c:
* src/chmod.c, src/chown.c, src/chroot.c, src/cksum.c, src/comm.c:
* src/cp.c, src/csplit.c, src/cut.c, src/date.c, src/dd.c, src/df.c:
* src/dircolors.c, src/dirname.c, src/du.c, src/echo.c, src/env.c:
* src/expand.c, src/expr.c, src/factor.c, src/fmt.c, src/fold.c:
* src/getlimits.c, src/groups.c, src/head.c, src/hostid.c:
* src/hostname.c, src/id.c, src/install.c, src/join.c, src/kill.c:
* src/link.c, src/ln.c, src/logname.c, src/ls.c, src/make-prime-list.c:
* src/md5sum.c, src/mkdir.c, src/mkfifo.c, src/mknod.c, src/mktemp.c:
* src/mv.c, src/nice.c, src/nl.c, src/nohup.c, src/nproc.c:
* src/numfmt.c, src/od.c, src/paste.c, src/pathchk.c, src/pinky.c:
* src/pr.c, src/printenv.c, src/printf.c, src/ptx.c, src/pwd.c:
* src/readlink.c, src/realpath.c, src/rm.c, src/rmdir.c, src/runcon.c:
* src/seq.c, src/shred.c, src/shuf.c, src/sleep.c, src/sort.c:
* src/split.c, src/stat.c, src/stdbuf.c, src/stty.c, src/sum.c:
* src/sync.c, src/tac.c, src/tail.c, src/tee.c, src/timeout.c:
* src/touch.c, src/tr.c, src/true.c, src/truncate.c, src/tsort.c:
* src/tty.c, src/uname.c, src/unexpand.c, src/uniq.c, src/unlink.c:
* src/uptime.c, src/users.c, src/wc.c, src/who.c, src/whoami.c:
In 'main' functions, Prefer 'return status;' to 'exit (status);'.
* src/coreutils-arch.c (_single_binary_main_uname)
(_single_binary_main_arch):
* src/coreutils-dir.c, src/coreutils-vdir.c (_single_binary_main_ls)
(_single_binary_main_dir, _single_binary_main_vdir):
Omit ATTRIBUTE_NORETURN. Return a value.
* src/coreutils.c (SINGLE_BINARY_PROGRAM): Omit ATTRIBUTE_NORETURN.
(launch_program): Now static.
* src/dd.c (finish_up): New function.
(quit, main): Use it.
* src/getlimits.c (main): Return a proper exit status.
* src/test.c (test_main_return): New macro.
(main): Use it.
* src/logname.c, src/nohup.c, src/whoami.c:
Use 'error' to simplify exit status in 'main' function.
* src/yes.c (main): Use 'return' rather than 'error' to exit,
so that GCC doesn't suggest ATTRIBUTE_NORETURN.
|
|
v8.23 has a test failure on Fedora rawhide build servers
in tests/df/skip-duplicate.sh. This was due to no '/'
entry being output by df. That was due to an inaccurate
/proc/mounts on the build environment as stat(/mnt/point)
identified all these /proc/mounts entries as having the
same device id:
/ rootfs
/ /dev/md1
/dev devtmpfs
/run tmpfs
/boot /dev/md0
/proc/filesystems /dev/md1
Since the device name on the right changes for a given id,
that causes the entries to be continually replaced, thus
resulting in no '/' entry. I'm guessing this is due to
the mock environment bind mounting unneeded or sensitive
items to a dummy file on the host / (/dev/md1) though
have not looked into those details.
So rather than relying on an accurate /proc/mounts,
the attached patch takes a more conservative replacement
approach and only swaps a new device entry when the
mount point matches. That should handle all practical
cases while also avoiding this situation.
* src/df.c (filter_mount_list): Only replace entries with
different device names when the mount point also matches.
|
|
* src/df.c (get_disk): Avoid an inconsequential mem leak
spotted by coverity. Also s/duplicities/duplicates/.
|
|
* src/df.c (last_device_for_mount): A new function to identify
the last device mounted for a mount point.
(get_disk): Use the above to discard mount entries for a device,
where a later mount entry uses a different device name than
that of the user specified device.
* tests/df/over-mount-device.sh: A new root test.
* tests/local.mk: Reference the new test.
* NEWS: Reword for all these related recent fixes.
Discussed at: http://bugs.gnu.org/16539#69
|
|
* src/df.c (get_disk): Include whether we can access the mount dir,
in the mount entry selection criteria. This handles the case where
a device is (bind) mounted multiple times with the shortest mount path
not being accessible, while some of the other mount points are.
Discussed at: http://bugs.gnu.org/16539#63
|
|
A system provided mount entry may be unavailable due to TOCTOU race,
or if another device has been over-mounted at that position, or due to
access permissions. In all these cases output "-" placeholder values
rather than either producing an error, or in the over-mount case
outputting values for the wrong device.
* src/df.c (device_list): A new global list now updated by
filter_mount_list().
(filter_mount_list): Adjust to take a parameter as to whether
update the global mount list, or only the mount <-> device ID mapping.
(get_dev): Use the device ID mapping to ensure we're not outputting
stats for the wrong device. Also output placeholder values when we
can't access a system specified mount point.
(get_all_entries): Set the DEVICE_ONLY param for filter_mount_list().
(devname_for_dev): A new function to search the mount <-> dev mapping.
* test/df/skip-duplicates.sh: Adjust accordingly.
* NEWS: Mention the bug fixes.
Discussed at: http://bugs.gnu.org/16539
|
|
* src/df.c (filter_mount_list): Recent commit v8.22-108-g25a2c94
failed to copy file system type along with the updated device name.
Therefore simply replace the existing mount entry with the
current one with all the latest device details. Note the name,
even if not shorter in this entry, will be replaced with a shorter
name in a subsequent mount entry.
* tests/df/skip-duplicates.sh: Add a test case.
|
|
* src/df.c (get_dev): asssert() on Solaris 10 is not marked as
__noreturn__ and thus the compiler may think V is uninitialized
later on in the function.
* THANKS.in: Remove the now committer.
|
|
The device name reported for a particular mount entry
may no longer be valid if the mount point was subsequently
mounted on a different device. Therefore honor the order
of the mount list returned by the system and use the last
reported device name.
* src/df.c (filter_mount_list): When discarding the current
mount entry, ensure that a new device name is not also discarded.
* tests/df/skip-duplicates.sh: Add a test case. Also fix
a false failure in the edge case of a system with only a
single file system.
* NEWS: Mention the fix.
|
|
* src/df.c (decode_output_arg): Use only enum constants to avoid
clang "warning: comparison of constant -1 with expression of
type 'display_field_t' is always false"
|
|
Linux with network namespaces contains entries in /proc/mounts like:
proc net:[4026532464] proc rw,nosuid,nodev,noexec,relatime 0 0
resulting in a failure to stat 'net:[...]', inducing a warning
and an exit with failure status.
* src/df.c (get_dev): Ignore all relative mount points.
* tests/df/skip-duplicates.sh: Add an entry to test relative dirs.
|
|
The symlink handling in commit v8.21-172-g33660b4 was incomplete
in the case where there were symlinks in the mount list itself.
For example, in the case where /dev/mapper/fedora-home was in the
mount list and that in turn was a symlink to /dev/dm-2, we have:
before> df --out=source /dev/mapper/fedora-home
devtmpfs
after > df --out=source /dev/mapper/fedora-home
/dev/mapper/fedora-home
* src/df.c (get_disk): Compare canonicalized device names from
the mount list. Note we still display the non canonicalized name,
even if longer, as we assume that is the most representative.
* tests/df/df-symlink.sh: This could theoretically fail on some systems
depending on the content of the mount list, but adjust to fail on any
system where symlinks are present in the mount list for the current dir.
|
|
* src/df.c (filter_mountlist): Remove the constraint that
a '/' needs to be in the device name for a mount entry to
be considered for deduplication. Virtual file systems also
have storage associated with them (like tmpfs for example),
and thus need to be deduplicated since they will be shown
in the default df output and subject to --total processing also.
* test/df/skip-duplicates.sh: Add a test to ensure we deduplicate
all entries, even for virtual file systems. Also avoid possible
length operations on many remote file systems in the initial
check of df operation. Also avoid the assumption that "/root"
is on the same file system as "/".
* NEWS: Mention the change in behavior.
|
|
* src/df.c (alloc_table_row): Use the size of char** to enlarge
the table. Spotted by Coverity.
|
|
* src/df.c (usage): Adjust the --human and --si descriptions
to not depend on each other. Also include an example that is
illustrative of the rounding, suffix, width, and localized fractions.
* src/system.h (emit_size_note). Adjust so that it's obvious the
description is pertaining to the input SIZE argument, and not
to any sizes that might be output by df for example.
Fixes http://bugs.gnu.org/16922
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* src/df.c (get_disk): Use the same heuristic used in
get_point() to select the shortest file system mount point,
in an attempt to show the base mounted file system.
* NEWS: Mention the bug fix.
|
|
This is so the matching for the device is done on the canonical name
of the disk node, rather than on the path of the symlink.
In any case the user will generally want to use the symlink target.
* src/df.c (get_disk): Canonicalize the passed file,
before matching against the list of mounted file system devices.
Note we pass the original symlink name to the "file" output field,
as the symlink target is usually available through the "source" field.
* tests/df/df-symlink.sh: Test the dereferencing operation.
* tests/local.mk: Mention the new test.
* NEWS: Mention the fix.
Reported by Ondrej Oprala
|
|
Add a new rule to ensure the use of quote() instead of '%s' or `%s'
in format strings of diagnostics messages.
* cfg.mk (sc_prohibit_quotes_notation): Add rule.
* TODO: Remove the entry regarding the '%s' notation.
* src/mkfifo.c (main): Remove the offending and in this case even
duplicate quoting in the format string of the error diagnostic.
* src/mknod.c (main): Likewise.
* src/df.c (decode_output_arg): Change two invocations of error()
according to the above new rule.
* src/numfmt.c: Fix numerous wrong quote notations to fit the above
new rule, mostly in internal debugging diagnostic messages.
|
|
This option has been undocumented for 12 years [1], and warned
about for a year [2].
[1] commit FILEUTILS-4_1_4-23-gd177203
[2] commit v8.17-43-g453ce92
* src/df.c (MEGABYTES_OPTION): Remove.
(long_options): Remove "megabytes" element.
(main): In the option parsing loop, remove the MEGABYTES_OPTION case.
* NEWS: Mention the change.
|
|
* src/df.c (usage): Document the new 'file' --output field.
(get_dev): Add a new parameter to pass the specified
argument from the command line through. Use '-' if a
command line parameter is not being used.
* doc/coreutils.texi (df invocation): Describe the new 'file' field.
* tests/df/df-output.sh: Adjust all fields test, and
add a specific test for --output=file.
* NEWS: Mention the new feature.
|
|
* src/df.c (get_header): Get the translation of "blocks" here,
rather than just marking the string for translation.
Fixes http://bugs.gnu.org/15054
|
|
Also slightly rephrase some descriptions for extra clarity, and
add more consistent indentation.
* src/df.c (usage): Semicolon, no final period.
* src/du.c (usage): Likewise, plus indentation and clarifying words.
* src/ls.c (usage): Semicolon, rephrasings, added parentheses for
clarity, indentation.
* src/rm.c (usage): Semicolons.
* src/tail.c (usage): Adjust -f description to prefer explanatory
language instead of option syntax.
|
|
Avoid Valgrind reports of "definitely lost" items
and while at it, free all discarded mount entries
to minimize the amount of memory used.
* src/df.c (filter_mount_list): Use the newly exported
free_mount_entry() from gnulib to free all mount entries
as they're discarded.
|
|
* src/df.c: Adjust indentation and spacing with has
gotten quite out of line in a couple of places.
|
|
* src/df.c (filter_mount_list): Initialize devlist->dev_num correctly
when unable to stat() a mount point. This will avoid possible invalid
deduplication done on the list due to use of uninitialized memory.
* tests/df/skip-duplicates.sh: Ensure this code path is exercised.
Also refactor the test to be table driven.
* NEWS: Mention the bug fix.
|
|
Like any other pseudo file system, df should show rootfs only
when the -a option is specified, i.e. specifying -trootfs alone
is not sufficient. As the rootfs entry is now elided by the
general deduplication in filter_mount_list (commit v8.20-103-gbb116d3),
all other references to rootfs can be removed again.
* src/df.c (show_rootfs): Remove global variable.
(ROOTFS): Remove constant.
(filter_mount_list): Remove case to handle rootfs specially.
(main): In the case for handling the -t option, remove setting
of the show_rootfs variable.
* tests/df/skip-rootfs.sh: Adapt the test case "df -t rootfs":
the rootfs file system must not be printed (because no -a).
* doc/coreutils.texi (df invocation): Correct the documentation
about eliding mount entries: it is not the first occurrence of
the the device which wins, but now rather the entry with the
shortest mount point name. Also adapt the description about
eliding pseudo file system types like rootfs.
* NEWS (Changes in behavior): Adapt entry.
|
|
* src/df.c (struct devlist): Add a new element for storing
pointers to mount_entry structures.
(devlist_head, dev_examined): Remove.
(filter_mount_list): Add new function to filter out the rootfs
entry (unless -trootfs is specified), and duplicities. The
function favors entries with a '/' character in me_devname
or those with the shortest me_mountdir string, if multiple
entries fulfill the first condition.
Use struct devlist to build up a list of entries already known,
and finally rebuild the global mount_list.
(get_all_entries): Call the above new function unless the -a
option is specified.
(get_dev): Remove the code for skipping rootfs and duplicities.
* tests/df/skip-duplicates.sh: Add test cases.
Co-authored-by: Bernhard Voelker <mail@bernhard-voelker.de>
|
|
Each program with at least one long option which is marked as
'required_argument' and which has also a short option for that
option, should print a note about mandatory arguments.
Define that well-known note centrally and use it rather than
literal printf/fputs, and add it where it was missing.
* src/system.h (emit_mandatory_arg_note): Add new function.
* src/cp.c (usage): Use it rather than literal printf/fputs.
* src/csplit.c, src/cut.c, src/date.c, src/df.c, src/du.c:
* src/expand.c, src/fmt.c, src/fold.c, src/head.c, src/install.c:
* src/kill.c, src/ln.c, src/ls.c, src/mkdir.c, src/mkfifo.c:
* src/mknod.c, src/mv.c, src/nl.c, src/od.c, src/paste.c:
* src/pr.c, src/ptx.c, src/shred.c, src/shuf.c, src/sort.c:
* src/split.c, src/stdbuf.c, src/tac.c, src/tail.c, src/timeout.c:
* src/touch.c, src/truncate.c, src/unexpand.c, src/uniq.c:
Likewise.
* src/base64.c (usage): Add call of the above new function
because at least one long option has a required argument.
* src/basename.c, src/chcon.c, src/date.c, src/env.c:
* src/nice.c, src/runcon.c, src/seq.c, src/stat.c, src/stty.c:
Likewise.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* src/df.c (struct devlist): Add new struct for storing already-
examined device numbers.
(devlist_head): Add new store of the above type.
(show_rootfs): Add new global boolean to not skip rootfs.
(dev_examined): Add new function to check if the device has
already been traversed.
(get_dev): Filter out rootfs unless "-t rootfs" or the -a
option is specified. Filter out duplicate entries by calling
the above new dev_examined unless the -a option is specified.
(main): Set the show_rootfs variable appropriately when the -t
option is specified for rootfs. Free device list (guarded by
IF_LINT).
* tests/df/skip-duplicates.sh: Add test to exercise the skipping
of duplicate entries.
* tests/df/skip-rootfs.sh: Add test to exercise the skipping
of the rootfs pseudo file system.
* tests/local.mk: Add the above new tests.
* NEWS (Changes in behavior): Mention the changes.
* doc/coreutils.texi (df invocation): Document df's behavior about
skipping rootfs and duplicate entries.
Co-authored-by: Bernhard Voelker.
|
|
As the inodes information is usually not so much of interest,
and some file systems including btrfs do not even provide it,
reading of the full df --output is easier when the block
statistic fields come just left of the last field, the mount
point.
* src/df.c (all_args_string): Move the inodes fields before
the block fields.
(usage): Likewise.
* tests/df/df-output.sh: Likewise.
* doc/coreutils.texi (df invocation): Likewise. Additionally,
explicitly mention the default order of the --output option.
|
|
* src/df.c (usage): Add a short description of --output and its
available field names for use in the optional argument.
* doc/coreutils.texi (df invocation): Add the new option with more
details and a few examples.
* NEWS (New features): Mention the new option.
(Changes in behvaior): Mention the new placeholder for fields
in the "total" line.
|
|
This supports changing the order of the fields displayed,
and also allows the simultaneous display of inode and block fields.
src/df.c (get_dev): Factor out calling get_header to ...
(main): ... here. Call print_table only if file_systems_processed.
src/df.c (Displayable fields): Rename DEV_FIELD to SOURCE_FIELD.
Rename TYPE_FIELD to FSTYPE_FIELD. Rename FREE_FIELD to AVAIL_FIELD.
Rename MNT_FIELD to TARGET_FIELD.
* src/df.c (display_field_t): Turn loose enum definition of the
displayable fields into a typedef. Add the inode fields ITOTAL_FIELD,
IUSED_FIELD, IAVAIL_FIELD, IPCENT_FIELD.
(field_data_t): Define structure to hold the display field, the
caption, the width and the alignment for each field of the above
type.
(field_data): Add array the values of field data for each display
field.
(headers, alignments, widths): Remove arrays.
(columns): Add a pointer to the storage for the array of the actual
output columns, i.e., fields.
(ncolumns): Add counter for the current output columns.
(alloc_table_row): Allocate the dynamic ncolumns value of strings.
(print_table): Loop over ncolumns instead of constant NFIELDS. Rename
loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure. Adjust the condition for printing
the last column by comparing with the column number instead of the
field name (TARGET_FIELD). Use the width and the alignment stored in
the columns data.
(alloc_field): Add new function to allocate a field in the columns
array.
(get_field_list): Add new function to fill the array of output columns
for each mode.
(get_header): Loop over ncolumns instead of constant NFIELDS. Rename
the loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure. Remove the code for continuing the
loop if the current column is the file system type and print_type is not
active (which is now impossible). Store the cell in the columns store
along with the new width.
(get_dev): Loop over ncolumns instead of the constant NFIELDS. Rename
the loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure; move the definition down to where it
is used first. Add cases for the inode fields ITOTAL_FIELD,
IUSED_FIELD, IAVAIL_FIELD and IPCENT_FIELD. Store the cell in the
columns store along with the new width.
(main): Use new get_field_list function to fill the list of output
columns.
* src/df.c (print_table): Instead of fputs()ing directly, apply
ambsalign on the last field, too. Use the new MBA_NO_RIGHT_PAD flag
for this.
* src/df.c (TOTAL_OPTION): Add new enum value.
(long_options): Use it for the "total" option instead of 'c'.
(main): Likewise.
* src/df.c (get_dev): Remove condition to copy the fstype into the
FSTYPE_FIELD - based on whether print_type is non-Null. Since the
introduction of get_field_list(), there are only fields added to
the columns array which have to be added.
* src/df.c (get_dev): Guard the summing up of the values for the
grand total: only do it if we have to print the total and if the
current invocation is not for processing it.
* src/df.c (main): Pass a hyphen "-" for the mount point name
to get_dev.
(get_dev): As the mount_point is now always there,
remove the condition and the else case for the TARGET_FIELD.
Instead, simply copy the mount_point.
All cells are now always present. Therefore, add an assertion
statement if one was not. Furthermore, hide the problematic
characters unconditionally.
(print_table): Remove the skipping of empty cells.
* tests/df/total-verify.sh: Accommodate to the new "-" in the
target field of the summary line.
* NEWS: Mention the change in behavior.
* src/df.c (field_type_t): Add new typedef of 3 enums to distinguish
between block, inode and other fields.
(field_data_t): Add field_type member of the above new type.
(field_data): Add default values for the above field_type,
indicating whether a field contains block values, inode values
or other, generic values.
(field_values_t): Add this struct to store the field values, used
by and factored out from get_dev to be able to define such a struct
for both the inode and the block values.
(get_field_values): Add this function to obtain the block values
and the inode values from the file system usage, used by and
factored out from get_dev.
(add_to_grand_total): Add this function to sum the values of the
current mount point up for the grand total, used by and factored
out from get_dev.
(get_dev): Move the definition of the variables fsu, buf, pct and
cell down to where they are used first to give them a better scope.
Factor out input_units, output_units, total, available,
negate_available, available_to_root, used and negate_used into the
above struct field_values_t.
Factor out the mapping of the fsu values to the above variables
into above function get_field_values.
Factor out the summing up of the grand total values into the
above function add_to_grand_total.
Define block_values and inode_values of the new type and call the
new get_field_values to fill them from the fsu values.
Call the above function add_to_grand_total for summing up the
values for the grand total.
Inside the loop over all fields, define a variable 'v' to point
to either the block_values or the inode_values, depending on the
current field's field_type. Change the code in the cases
TOTAL_FIELD/ITOTAL_FIELD, USED_FIELD/IUSED_FIELD, AVAIL_FIELD/
IAVAIL_FIELD and PCENT_FIELD/IPCENT_FIELD to use the field values
where 'v' is pointing to, i.e., either the block_values or the
inode_values.
* src/df.c (main): Remove setting of grand_fsu.fsu_blocks in the
inode_format case as this is no longer needed and would lead to
wrong results once when mixed block/inode fields will be used.
* src/df.c (main): Cleanup the code at the end regarding
file_systems_processed to make the code clearer.
* src/df.c (inode_format): Remove variable.
(main): Remove initialization of the above variable.
In getopts loop, directly set the header_mode to INODES_MODE
instead of using the above variable. Afterwards, remove the
mapping to INODES_MODE as it is already set.
* src/df.c (posix_format): Move variable ...
(main): ... to here.
* src/df.c (print_table): Enhance the comment about 2-line format
in cases where the SOURCE_FIELD exceeds 20 chars, as such
behavior has been removed long ago by commit v8.10-40-g99679ff.
* src/df.c (Display modes): Add OUTPUT_MODE, remove unused NMODES.
(display_field_t): Remove unnecessary NFIELDS.
(field_data_t): Add member 'arg' for the field name in the --output
argument. Add member 'used' to remember if a field is already used
in the columns array.
(field_data): Add values for the above new members arg and used.
(all_args_string): Add variable which represents the argument for
the --output option which includes all fields.
(OUTPUT_OPTION): Add enum to identify the long --output option.
(long_options): Add optional-argument --output option.
(alloc_field): Assert that the field is not already used.
Mark the field as used.
(decode_output_arg): Add function to parse the comma-separated
field list passed to the --output option in order to add the
appropriate fields to the columns array.
(get_field_list): Add case for the new OUTPUT_MODE to add all
available fields to columns in the case the --output option
has been passed without any values. Use the comma-separated
field list form to pass to decode_output_arg to keep the field
header mapping for the OUTPUT_MODE only on one place.
(main): Define format string msg_mut_excl to be used in the
following checks whether the use of --output and the other
option is mutually exclusive.
In the getopt_long loop, add a check to the case for the -i option
to issue an error message when it is used together with --output;
Likewise for -T and -P.
Add a new case for OUTPUT_OPTION, together with similar checks as
above and eventually passing the optarg to decode_output_arg.
After the getopt_long loop, consider the OUTPUT_MODE case in order
not to run into -h or -P mode.
* src/df.c (get_dev): Also xstrdup the dev_name, and free it
afterwards to silence a valgrind warning about definitely lost
memory.
(main): Free the columns store to silence valgrind, guarded by
the IF_LINT macro.
* src/df.c (main): Pass "total" as the mount point to get_dev if
the SOURCE_FIELD is not among the columns to output.
* tests/df/df-output.sh: Change the test to ensure the content of
the target field of the grand total line: if the source field is
present, then the target should be "-", else the target field should
be "target".
* NEWS (Changes in behavior): Enhance the exiting NEWS entry.
* doc/coreutils.texi (df invocation): Document the content of the
source and target field in the grand total line.
* src/df.c (main): Add another condition to the need_fs_type
parameter of read_file_system_list whether the FSTYPE_FIELD is
used or not.
* src/df.c (get_header): Indicate the block size used,
in the "size" header, when using --output without -h.
* tests/df/df-output.sh: Adjust for, and add an extra test for,
the new behavior.
|
|
* src/df.c (get_header): Mark two "%s-%s" strings for translation
and give translators a hint what each is for.
|
|
* src/df.c (main): Add conditions to fail when the mount list cannot
be read: this includes the cases when a file name argument is given
and any of -a, -l, -t or -x is used.
* doc/coreutils.texi: Document the additional error conditions.
* tests/df/no-mtab-status: Add a new test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
|
|
When the combination of the file system options with given files or
devices does not lead to output, "df --total" would exit successfully
although it should not.
Examples:
$ df --total --type=xfs / # when / is not an XFS file system
$ df --total --local -t nfs DIR # nfs is remote per se ...
$ df --total -t qwerty /dev/sdb5 # typo in file system type
Furthermore, "df --total" would not print the error message "no file
systems processed" when the file argument does not exist or is otherwise
not accessible.
Example:
$ df --total __not_exist__
These 2 bugs are present since --total was added by commit
v6.12-166-gea2887b.
* src/df.c (get_dev): Do not set file_systems_processed to true when
force_fsu is true, i.e. when the row for the "total" line is processed.
(main): Don't print totals unless we've processed a file system.
Also only print the "no FS processed" message if there was no
preceding diagnostic.
* tests/df/total-unprocessed: Add a new test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
Improved-by: Jim Meyering
|
|
It's awkward to read and problematic for scripts when
control characters like '\n' are output.
Note other fields are already handled with mbsalign,
which converts non printable chars to the replacement char.
A caveat to note with that, is the replacement char takes
a place in the field and so possibly truncates the field
if it was the widest field in the records.
Note a more general replacement function, that
handles all printable, or non white space characters,
would require more sophisticated support for various
encodings, and the complexity vs benefit was not
deemed beneficial enough at present.
Perhaps in future a more general replacement function
could be shared between the various utilities.
Note <space> is unaffected in any field,
which could impact scripts processing the output.
However any of the number fields at least could have
spaces considering `LANG=fr_FR df -B\'1`, so it's
probably best to leave spaces, which also allows
scripts to handle mount points with spaces without change.
* src/df.c (hide_problematic_chars): Replace control chars with '?'.
* tests/df/problematic-chars: Add a new root only test.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the fix.
|
|
* src/df.c (MEGABYTES_OPTION): Add enum and mark it for removal
in August 2013.
(long_options): Use MEGABYTES_OPTION for --megabytes option.
(main): Add a case for it and issue a deprecation warning if
the long form is used. Document the short -m option to
exist only for BSD compatibility.
|
