| Age | Commit message (Collapse) | Author |
|---|
|
* NEWS: "cp" no longer considers a destination symlink to be the
same as the referenced file when copying links or making backups.
* src/copy.c (copy_reg): When following a symlink, use the
followed name in later chown etc. requests, so that the created
file is affected, rather than the symlink. Use O_NOFOLLOW on
source when not dereferencing symlinks; this avoids a race.
Preserve errno correctly when doing multiple open attempts on the
destination.
(copy_internal): Follow destination symlinks only when copying a
regular file and only when we don't intend to remove or rename the
destination first, regardless of whether following source
symlinks; this is because since POSIX and tradition (e.g.,
FreeBSD) say we should ordinarily follow destination symlinks if
the system calls would ordinarily do so.
* src/copy.h (struct cp_options): Add comment that 'dereference'
is only for source files.
* src/cp.c (usage): Note that --derereference etc. are only for
source files.
(make_dir_parents_private): Follow symlinks, regardless of whether
--dereference is specified, because these are destination symlinks.
* tests/cp/same-file: Adjust tests to match revised behavior.
Filter out perror output since it might vary from host to host.
Use sed alone instead of also using echo.
* doc/coreutils.texi (cp invocation): Document the behavior better when
the destination is a symlink. Clarify source versus destination
symlinks. Describe the new behavior for destination symlinks.
2007-06-15 Jim Meyering <jim@meyering.net>
* src/copy.c: Include "canonicalize.h".
(copy_reg): Use canonicalize_filename_mode to follow the symlink,
so that we can always open with O_EXCL and avoid a race.
|
|
* Makefile.maint (sc_prohibit_quotearg_without_use): New rule.
* src/cp.c: Don't include "quotearg.h". It wasn't used.
|
|
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux.
* tests/selinux: New file.
* tests/Makefile.am (EXTRA_DIST): Add selinux.
* tests/misc/selinux: Source the new script, rather than open coding it.
Change how "cp -a" and "cp --preserve=context" work with SELinux.
Now, cp -a attempts to preserve context, but failure to do so does
not change cp's exit status. However "cp --preserve=context" is
similar, but failure *does* cause cp to exit with nonzero status.
* src/copy.h (struct cp_options) [require_preserve_context]: New member.
* src/copy.c (copy_reg, copy_internal): Implement the above.
* src/mv.c (cp_option_init): Initialize the new member.
* src/install.c (cp_option_init): Likewise.
* src/cp.c (cp_option_init): Likewise.
(decode_preserve_arg): Set it or reset it.
FIXME: add an on-writable-NFS-only test
|
|
patch, mv and cp do not provide the "-Z context" option.
* src/copy.c: Include <selinux/selinux.h>.
(restore_default_fscreatecon): New function.
(copy_reg): Make cp --preserve=context work for existing destination.
(copy_internal): Likewise for new destinations.
* src/copy.h (cp_options) [preserve_security_context]: New member.
* src/cp.c: Include <selinux/selinux.h>.
(selinux_enabled): New global.
(usage): Mention new --preserve=context option.
(PRESERVE_CONTEXT): Define/use.
(decode_preserve_arg): Handle PRESERVE_CONTEXT.
(main): Remove an obsolete comment.
If --preserve=context is specified on a system without SELinux
enabled, give a diagnostic and fail.
* src/mv.c: Include <selinux/selinux.h>.
Set x->preserve_security_context if SELinux is enabled.
* src/install.c: Accept new "-Z, --context=C" option.
Accept --preserve-context option (but not -P option).
Accept alternate spelling: --preserve_context, for now.
Include <selinux/selinux.h> and "quotearg.h".
(selinux_enabled, use_default_selinux_context): New globals.
(PRESERVE_CONTEXT_OPTION): Define.
(cp_option_init): Default: do not preserve security context.
(setdefaultfilecon): New function.
(main): Honor new options.
* src/Makefile.am (mv_LDADD, cp_LDADD, ginstall_LDADD):
Add $(LIB_SELINUX).
|
|
* src/system.h (emit_bug_reporting_address): New function.
* src/base64.c: Use it rather than a literal printf.
* src/basename.c, src/cat.c, src/chgrp.c, src/chmod.c:
* src/chown.c, src/chroot.c, src/cksum.c, src/comm.c, src/cp.c:
* src/csplit.c, src/cut.c, src/date.c, src/dd.c, src/df.c:
* src/dircolors.c, src/dirname.c, src/du.c, src/echo.c, src/env.c:
* src/expand.c, src/expr.c, src/factor.c, src/fmt.c, src/fold.c:
* src/head.c, src/hostid.c, src/hostname.c, src/id.c, src/install.c:
* src/join.c, src/kill.c, src/link.c, src/ln.c, src/logname.c:
* src/ls.c, src/md5sum.c, src/mkdir.c, src/mkfifo.c, src/mknod.c:
* src/mv.c, src/nice.c, src/nl.c, src/nohup.c, src/od.c:
* src/paste.c, src/pathchk.c, src/pinky.c, src/pr.c, src/printenv.c:
* src/printf.c, src/ptx.c, src/pwd.c, src/readlink.c, src/rm.c:
* src/rmdir.c, src/seq.c, src/setuidgid.c, src/shred.c, src/shuf.c:
* src/sleep.c, src/sort.c, src/split.c, src/stat.c, src/stty.c:
* src/su.c, src/sum.c, src/sync.c, src/system.h, src/tac.c:
* src/tail.c, src/tee.c, src/test.c, src/touch.c, src/tr.c:
* src/true.c, src/tsort.c, src/tty.c, src/uname.c, src/unexpand.c:
* src/uniq.c, src/unlink.c, src/uptime.c, src/users.c, src/wc.c:
* src/who.c, src/whoami.c, src/yes.c: Likewise.
|
|
* src/copy.c (copy_internal): Omit the group- or other-writeable
permissions when creating a directory, to avoid a race condition
if the special mode bits aren't right just after the directory is
created.
* src/cp.c (make_dir_parents_private): Likewise.
* tests/cp/parent-perm-race: Test for the "cp --preserve=mode"
race fix in copy.c.
|
|
* src/cp.c (make_dir_parents_private): Report the error sooner with
"cp --parents DIR/FILE DEST" when DIR is a non-directory, thus not
creating the directory, DEST/DIR.
* tests/cp/cp-parents: Test for the non-race-condition bug fixed
by the above change.
|
|
* m4/jm-macros.m4 (coreutils_MACROS): Check for fchmod.
* src/copy.c (fchmod_or_lchmod): New function.
(copy_reg): New arg OMITTED_PERMISSIONS. All uses changed.
Omit confusing and unused ", dst_mode" arg to 'open' without O_CREAT.
When creating a file, use O_EXCL, so we're more likely to detect
funny business by other processes. At the end, if permissions
were omitted, chmod them back in.
(copy_internal): If the ownership might change, omit some permissions
at first, then restore them after chowning the file.
* src/cp.c (make_dir_parents_private): Likewise.
* src/copy.c (cached_umask): New function.
* src/copy.h (cached_umask): New decl.
|
|
7777. This matches historical 'cp' behavior and avoids some
(though not all) implementation-defined behavior of mkdir.
* src/cp.c (make_dir_parents_private): Likewise.
* src/copy.c (copy_internal): Don't pass 'open' a mode greater
than 777. This is required by POSIX. It doesn't make any difference
in actual behavior on any host that I know of.
|
|
where the first one names a directory and the second name ends in
a slash and doesn't exist. E.g., "mv dir B/", for nonexistent B,
now succeeds, once more. This reverts part of the 2004-06-27
change for 5.3.0.
* NEWS: Say the above.
* src/mv.c (target_directory_operand): Don't require (here)
that the target operand "look like" a directory. This change
pushes the test down to the rename syscall level, where a
"mv dir existing-non-dir/" will mistakenly succeed on older systems
that ignore trailing slashes in the rename destination argument.
* src/cp.c (target_directory_operand): Likewise, but for cp.
* tests/mv/trailing-slash: Exercise the above fixes.
* tests/cp/trailing-slash: New file.
* tests/cp/Makefile.am (EXTRA_DIST): Add trailing-slash.
|
|
|
|
S_ISLNK are defined, since they're always defined now.
* src/cp.c (main): Likewise.
* src/ln.c (main): Likewise.
* src/ls.c (get_link_name, make_link_name): Likewise.
* src/mkfifo.c (usage): Likewise.
* src/who.c (S_IWGRP): Likewise.
|
|
|
|
(ASSIGN_BASENAME_STRDUPA): Likewise. Reduce time spent
traversing the string.
|
|
option string from its description, so help2man formats the
derived man page properly. Patch from Nicolas François
in http://bugs.debian.org/351601.
|
|
(re_protect, make_dir_parents_private): Use lchmod rather than chmod.
|
|
|
|
Remove umask_kill, don't change the process umask, and let the kernel
apply the umask where appropriate.
(make_dir_parents_private): Fix logic for POSIX ACLs.
|
|
TIMESPEC_NS macro.
|
|
(usage): Remove description of --reply.
|
|
corresponding option string and value arrays are consistent.
Remove a harmless trailing `, 0' from a value list.
|
|
It was deprecated nearly 6 years ago and has been warning
users to switch to --backup=S since fileutils-4.0j.
|
|
(parents_option): Renamed from flag_path. All uses changed.
(make_dir_parents_private): Renamed from make_path_private.
All uses changed.
(usage): Don't use "path" to describe a file name.
|
|
Use chown_failure_ok rather than our own code.
(cp_options_init): Use chown_privileges rather than getuid.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
re_protect, make_path_private, target_directory_operand, do_copy,
cp_option_init, decode_preserve_arg, main): Use bool when appropriate.
(target_directory_operand): Do not clear *NEW_DST if stat
succeeds. It's not necessary in that case, as *NEW_DST is always
false already.
(do_copy): Rewrite slightly to avoid need for "unreachable" comment.
(main): Use EXIT_SUCCESS, EXIT_FAILURE instead of 0, 1.
|
|
bother to check for this.
|
|
(make_path_private): 2nd arg is now size_t, not int,
to avoid problem when path_concat dir name is longer than 2 GiB (!).
|
|
and --no-target-directory options, respectively.
(NO_TARGET_DIRECTORY_OPTION, TARGET_DIRECTORY_OPTION):
Remove. All uses changed to 'T' and 't', respectively.
(long_opts, usage, do_copy, main): Add -t and -T as
aliases for --target-directory and --no-target-directory,
respectively.
|
|
(NO_TARGET_DIRECTORY_OPTION): New constant.
(long_opts, usage, do_copy, main): Add support for
|
|
last operands that are (or look like) directories.
* src/cp.c (target_directory_operand): New, nearly-common function,
It reports an error if the destination appears to be a directory
(e.g., because it has a trailing slash) but is not.
* src/cp.c (do_copy): Use it.
* src/cp.c (do_copy): Don't assume argc is positive.
Don't bother to lstat dest, since copy() will do that for us.
Use "const" to avoid the need for cast.
* src/cp.c (do_copy): Don't output a usage message because of file
problems (e.g., an operand is not a directory). Use it only for
syntax. Standardize on "target %s is not a directory" for the
diagnostic.
* src/cp.c (do_copy): Remove test for trailing slash, since
target_directory_operand now does this.
* src/cp.c (main): Reject multiple target directories.
Check whether a specified target is a directory when parsing the
options, using stat. This gives more-accurate diagnostics.
|
|
--target-directory: s/move/copy/. From Paul Jarc.
|
|
too few operands ("missing operand after `xxx'") or
too many operands ("extra operand `xxx'").
Include "quote.h" and/or "error.h" if it wasn't already being included.
(do_copy): Likewise.
|
|
Suggestion from Karl Berry.
Include "quoatearg.h".
(do_copy): Use quotearg_colon (not quote) for diagnostics
that begin with `"%s:'.
|
|
(do_copy): Declare/use local xstat rather than x->xstat.
(main): Remove code that set x.xstat.
|
|
(exit_status): Remove static var....
(main): Making it local here instead. Use =, not |=, to set it.
|
|
(make_path_private): Likewise.
|
|
The former is more maintainable and usually shorter.
|
|
of 2003-09-19. Now, AUTHORS is a comma-separated list of strings.
Update the call to parse_long_options so that `AUTHORS, NULL' are the
last parameters.
* src/true.c (main): Append NULL to version_etc argument list.
* src/sys2.h (case_GETOPT_VERSION_CHAR): Likewise.
|
|
|
|
Begin each WRITTEN_BY string with `Written by ' and end it with `.'.
Mark each WRITTEN_BY string as translatable.
|
|
|
|
the call to parse_long_options so that `AUTHORS, NULL' are the last parameters.
|
