Age | Commit message (Collapse) | Author |
|
* src/copy.c (copy_reg): If sparse_copy() failed, then an
erroneous error about failing to extend the file would be reported.
|
|
* src.copy.c (copy_reg): Use fiemap to read sparse files, even
if the output is not to a regular file.
* NEWS: Mention the improvement.
|
|
With --sparse=always use fallocate(...PUNCH_HOLE...) to
avoid any permanent allocation due to speculative
preallocation employed by file systems such as XFS.
* m4/jm-macros.m4: Check for <linux/falloc.h> and fallocate().
* src/copy.c (punch_hole): A new function to try and punch
a hole at the specified offset if supported.
(create_hole): Call punch_hole() after requesting a hole.
(extent_copy): Likewise.
* NEWS: Mention the improvement.
|
|
Previously cp would not detect runs of NULs that were
smaller than the buffer size used for I/O (currently 128KiB).
* src/copy.c (copy_reg): Use an independent hole_size, set to
st_blksize, to increase the chances of detecting a representable hole,
in a run of NULs read from the input.
(create_hole): A new function refactored from sparse_copy() and
extent_copy() so we have a single place to handle holes.
(sparse_copy): Adjust to loop over the larger input buffer
in chunks of the passed hole size. Also adjust to only call
lseek once per hole, rather than at least once per input buffer.
* tests/cp/sparse.sh: Add test cases for various sparse chunk sizes.
* NEWS: Mention the improvement.
|
|
Following on from commit v5.92-729-g130dd06, also avoid
the erroneous directory hardlink warning with -H.
* src/copy.c (copy_internal): Also handle the -H case
for command line arguments.
* tests/cp/duplicate-sources.sh: Augment the test case.
* NEWS: Augment the news entry.
|
|
* src/copy.c (copy_internal): Handle the case where we have the
same destination directory as already encountered, which can only
be due to the corresponding source directory being specified multiple
times.
* tests/cp/duplicate-sources.sh: Add a test for the new multiply
specified directory case, and the existing multiply specified file case.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
|
|
C11 doesn't require them, even POSIX doesn't strictly require the
64-bit versions, and it makes the code a bit clearer if they're
used only when needed.
* src/copy.c (write_zeros, extent_copy):
* src/extent-scan.h (struct extent_info.ext_length):
Use off_t, not uint64_t, for a value derived from a file offset.
* src/extent-scan.h (struct extent_info.ext_flags)
Prefer plain unsigned int to uint32_t where either will do.
(struct extent_scan.ei_count):
Use size_t, not uint32_t, for a value bounded by SIZE_MAX.
* src/factor.c (MAGIC64, MAGIC63, MAGIC65):
Remove unnecessary casts to uint64_t.
|
|
The security_context_t type was always an artificial separation
from a standard char* string, and various libselinux using code
assumed both were synonymous. In addition, prior to libselinux 2.3
function declarations were incorrect wrt constness of this type.
Here we replace security_context_t with char*, and also
provide a wrapper function to cater for the const issue on
older libselinux.
* src/system.h (se_const): A new function to avoid and identify
the const issue on older libselinux.
* src/copy.c: s/security_context_t/char */.
* src/cp.c: Likewise.
* src/id.c: Likewise.
* src/install.c: Likewise.
* src/ls.c: Likewise.
* src/mkdir.c: Likewise.
* src/mkfifo.c: Likewise.
* src/mknod.c: Likewise.
* src/runcon.c: Likewise.
* src/selinux.c: Likewise.
* tests/cp/no-ctx.sh: Likewise.
* src/chcon.c: Likesize.
|
|
* src/copy.c (copy_internal): Include the copy_attr() call for symlinks.
This should not dereference symlinks, since llistxattr() is used
in attr_copy_file() in libattr, and so should copy all but the filtered
extended attributes. Note we don't just move the copy_attr() call
before the set_owner() call, as that would break capabilities
for non symlinks.
* tests/cp/cp-mv-enotsup-xattr.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/16131
|
|
* src/copy.c (copy_internal): Replace dev_t arg DEVICE with struct
stat pointer arg PARENT. All callers changed. This removes an
unwarranted assumption that dev_t values of 0 cannot occur in file
systems. See: http://bugs.gnu.org/17179
|
|
* src/copy.c (overwrite_ok): Fix the gettext calls so
that the second string is tagged for translation.
Display the correct "replace ..." prompt when in move_mode.
* tests/mv/i-3.sh: Display the output on failure to ease debugging.
|
|
* src/copy.c (overwrite_ok): Rename from overwrite_prompt. Invoke
yesno instead of having the caller do it; that's cleaner. Return
bool, not void. All callers changed.
|
|
* src/copy.c (overwrite_prompt): New arg X. All callers changed.
Use X to improve the quality of the prompt (Bug#17087).
* tests/mv/i-2.sh, tests/mv/i-3.sh: Change test to match new prompt.
|
|
* src/copy.c (copy_dir): Use the new SAVEDIR_SORT_FASTREAD, not
SAVEDIR_SORT_INODE. Problem reported by Bernhard Voelker in:
http://lists.gnu.org/archive/html/coreutils/2014-02/msg00037.html
|
|
Problem reported by Bernhard Voelker in:
http://lists.gnu.org/archive/html/coreutils/2014-02/msg00034.html
* src/copy.c (copy_dir): Adjust to recent gnulib change.
|
|
* src/copy.c (copy_reg): If linkat() is available it doesn't
matter about the gnulib emulation provided, and thus the
LINK_FOLLOWS_SYMLINKS should not have significance here.
This was noticed on FreeBSD and the consequence is that
cp --link will create hardlinks to symlinks there, rather
than emulating with symlinks to symlinks.
* tests/cp/link-deref.sh: Adjust the checks to cater
for all cases where hardlinks to symlinks are supported.
|
|
* src/copy.c (copy_internal): Use the global process context
to set the context of existing directories before they're populated.
This is more consistent with the new directory case, and fixes
a bug for existing directories where we erroneously set the
context to the last copied descendent, rather than to that of
the source directory itself.
* tests/cp/cp-a-selinux.sh: Add a test for this case.
* NEWS: Mention the fix.
* THANKS.in: Add reporter Michal Trunecka.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* src/selinux.h (ignorable_ctx_err): A new function used
to determine if a warning should be given after a call
to defaultcon() or restorecon().
* src/cp.c (main): Fix the setfscreatecon() call to use
the argument passed by the user.
* src/mkdir.c (make_ancestor): Show all but "ignoreable" errors
from defaultcon() and restorecon().
* tests/misc/selinux.sh: Add a test run as root in selinux enforcing
mode, to ensure cp --context=invalid is honored and fails immediately.
|
|
cp, mv, install, mkdir, mkfifo, mknod are adjusted so that:
-Z no longer accepts an argument.
-Z or --context without an argument do not warn without SELinux.
--context with an argument will warn without SELinux.
* src/local.mk: Reference the new selinux module where required.
* src/system.h: Make the argument to --context optional.
* src/mkdir.c: Likewise. Also handle the SMACK case for --context.
Note we currently silently ignore -Z with SMACK.
* src/mkfifo.c: Likewise.
* src/mknod.c: Likewise.
* src/install.c: Likewise. Note install(1) by default already
set the context for target files to their system default,
albeit with an older method. Use the -Z option to select between
the old and new context restoration behavior, and document
the differences and details for how context restoration
is done in new and old methods, with a view disabling the
old method entirely in future.
* src/cp.c: Make the argument to --context optional.
Note -Z implies --no-preserve=context. I.E. -Z overrides
that aspect of -a no matter what order specified.
(struct cp_options): Document the context handling options.
(main): Check/adjust option combinations after all
options are processed, to both simplify processing
and to make handling independent of order of options
on the command line. Also improve the diagnostics
from a failed call to setfscreatecon().
(set_process_security_ctx): A new function,
refactored to set the default context from the source file,
or with the type adjusted as per the system default for
the destination path.
(set_file_security_ctx): A new function refactored to
set the security context of an existing file, either based on
the process context or the default system context for a path.
(copy_internal): Use the refactored functions to simplify
error handling and consistently fail or warn as needed.
(copy_reg): Likewise.
(copy_internal): With --preserve=context, also copy
context from non regular files. Note for directories this may
impact the copying of subsequent files to that directory?
(copy_attr): If we're handling SELinux explicitly,
then exclude to avoid the redudant copy with --preserve=context,
and the problematic copy with -Z. Note SELinux attribute exclusion
also now honors cp -a --no-preserve=context. Note there was a
very small window over 10 years ago, where attr_copy_file was
available, while attr_copy_check_permissions was not, so we
don't bother adding an explicit m4 check for the latter function.
* src/mv.c: Support --context, but don't allow specifying an argument.
* src/chcon.c: Adjust a comment to be specific to SELinux.
* src/runcon.c: Likewise.
* src/copy.c: Honor the context settings to "restorecon" as appropriate.
* src/copy.h: Add a new setting to select "restorecon" functionality.
* tests/mkdir/selinux.sh: s/-Z/--context=/
* tests/cp/cp-a-selinux.sh: Augment this test with cases
testing basic -Z functionality, and also test the various
invalid option combinations and option precedence.
* tests/mkdir/restorecon.sh: Add a new test for the
more involved mkdir -Z handling, since the directory changing
and non existent directories need to be specially handled.
Also check the similar but simpler handling of -Z by mk{nod,fifo}.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (cp invocation): Update as per interface changes.
(mv invocation): Likewise.
(install invocation): Likewise.
(mkfifo invocation): Likewise.
(mknod invocation): Likewise.
(mkdir invocation): Likewise.
* NEWS: Mention the new feature and change in behavior.
|
|
* src/copy.c (create_hard_link): Add a bool 'dereference' parameter,
and pass AT_SYMLINK_FOLLOW as 'flags' to linkat() when dereference
is true.
(should_dereference): Add new 'bool' function to determine if a
file should be dereferenced or not.
(copy_internal): Use the above new should_dereference() and remember
its return value in a new local bool 'dereference' variable. Use that
in all three calls to create_hard_link().
* src/cp.c (main): after parsing the options, if x.dereference is
still DEFEF_UNDEFINED and the x.recursive is true, then only set
x.dereference to DEREF_NEVER iff --link was not specified.
* doc/coreutils.texi (cp invocation): Mention that cp(1) does not
follow symbolic links in the source when --link is specified.
Likewise in the description of the -R option when used together with
that option.
* tests/cp/same-file.sh: Adapt the expected results for the -fl,
the -bl and the -bfl tests.
* tests/cp/link-deref.sh: Add a new test.
* tests/local.mk (all_tests): Reference the above new test.
* NEWS (Changes in behavior): Mention the change.
This fixes http://bugs.gnu.org/15173
Co-authored-by: Bernhard Voelker <mail@bernhard-voelker.de>
|
|
* src/copy.c (copy_internal): Change mention of the removed --reply=no
option, to the similar in this context --no-clobber.
* src/sort.c: SI and IEC suffixes can now be mixed when --human-numeric.
|
|
src/copy.c (copy_internal): Use rmdir() rather than unlink()
when the source is a directory, so that empty directories
are replaced in the destination as per POSIX.
* tests/mv/part-rename.sh: Augment with various combinations.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/14763
|
|
|
|
* src/copy.c (copy_reg): Check ROOT_UID rather than 0,
which is significant on HP-NonStop.
|
|
* src/cfg.mk (sc_prohibit-gl-attributes): Disallow the __attribute()
form without trailing underscores as that is not elided where required.
Also ensure we use gnulib macros rather than defining our own.
* src/system.h: Remove gnulib provided macros.
* src/chown-core.c: Likewise.
* src/chroot.c: Likewise.
* src/copy.c: Likewise.
* src/csplit.c: Likewise.
* src/dd.c: Likewise.
* src/expr.c: Likewise.
* src/extent-scan.c: Likewise.
* src/factor.c: Likewise.
* src/ls.c: Likewise.
* src/od.c: Likewise.
* src/paste.c: Likewise.
* src/ptx.c: Likewise.
* src/sort.c: Likewise.
* src/stat.c: Likewise.
* src/stty.c: Likewise.
* src/system.h: Likewise.
* src/tac.c: Likewise.
* src/test.c: Likewise.
* src/tsort.c: Likewise.
|
|
Note we use "failed to {access,close}" for those single operations,
and "error {read,writ}ing" for those partial operation failures.
* src/copy.c: Improve error messages for failing read, write and close.
* src/cp.c: Improve error messages for failing access.
* src/dd.c: Improve error messages for failing read, write and open.
* src/head.c: Improve error message for failing close.
* src/install.c: Improve error messages for failing access.
* src/ln.c: Likewise.
* src/mv.c: Likewise.
* src/touch.c: Improve error message for failing close.
* src/truncate.c: Likewise.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
cp --no-preserve=mode exited 1 unconditionally. Furthermore,
the tests which would have detected this error - namely
link-preserve.sh and reserve-mode.sh - failed to test
cp's exit code.
* src/copy.c (copy_reg): In the case x->explicit_no_preserve_mode,
do only set return_val to false iff the previous set_acl ()
failed.
* tests/cp/link-preserve.sh: Check cp's exit code.
* tests/cp/link-symlink.sh: Likewise.
* tests/cp/preserve-mode.sh: Likewise.
* NEWS: Mention the fix.
Bug introduced in commit v8.19-145-g24ebca6.
Reported by Florian Pritz in http://bugs.gnu.org/13119.
|
|
* src/copy.c (copy_internal): Use DST_MODE_BITS, not SRC_MODE.
See Bernhard R. Link in <http://bugs.gnu.org/12947> and in
<http://bugs.debian.org/598018>.
|
|
The --no-preserve=mode option did not do what its name implies:
it would mistakenly preserve permission mode bits.
* NEWS: Mention the fix.
* TODO: Remove an entry.
* src/copy.c (copy_reg): Add a condition to properly
handle the --no-preserve=mode option for files
(copy_internal): Add a condition to properly handle the
--no-preserve=mode option for directories.
* src/copy.h (struct cp_options): Add a new boolean.
* src/cp.c (cp_option_init,decode_preserve_arg): Set the
new boolean value according to specified options.
* src/install.c (struct cp_options): Initialize the new boolean.
* src/mv.c (struct cp_options): Initialize the new boolean.
* tests/cp/preserve-mode.sh: Add a new test.
* tests/cp/link-preserve.sh (-a --no-preserve=mode): Adjust the
expected perms: now, --no-preserve=mode overrides the --preserve=mode
that is inherent in -a, as it should.
* tests/local.mk: Add the new test to the list.
|
|
* src/copy.c (copy_reg): In a narrow race (stat sees dest, yet
open-without-O_CREAT fails with ENOENT), retry the open with O_CREAT.
* tests/cp/nfs-removal-race: New file.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
Reported by Philipp Thomas and Neil F. Brown in
http://bugs.gnu.org/11100
|
|
This was inadvertently omitted from v8.5-104-g47076e3,
and gives the same 5% speedup when copying from an SSD.
* src/copy.c (copy_internal): Apply the FADVISE_SEQUENTIAL hint.
|
|
* src/copy.c (copy_reg): Split an expression before a binary operator,
not after it.
* src/cut.c (set_fields): Likewise.
* src/id.c (main): Likewise.
* src/install.c (setdefaultfilecon): Likewise.
* src/join.c (ignore_case): Likewise.
* src/pr.c (cols_ready_to_print, init_parameters, print_page): Likewise.
* src/stty.c (set_window_size): Likewise.
* src/wc.c (SUPPORT_OLD_MBRTOWC): Likewise.
* src/who.c (scan_entries): Likewise.
* src/test.c (binary_operator): Join a split line.
* src/extent-scan.c (extent_scan_read): Move an ">" from end of line
to beginning of the following.
Likewise for two other expressions.
|
|
* src/copy.c (copy_reg): Don't truncate an existing file,
to support copying attributes between existing files.
The original use case only considered creating new files,
and it would be a very unusual use case to be relying
on the truncating behavior.
* doc/coreutils.texi (cp invocation): Mention the non
truncating behavior.
* tests/cp/attr-existing: A new test to ensure O_TRUNC skipped.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the change in behavior.
|
|
* src/dd.c: Move is_nul() from here to ...
* src/system.h: ... here
* src/copy.c (sparse_copy): Adjust to use the refactored is_nul()
|
|
But only when both A and B were hard links to the same symlink.
* src/copy.c (same_file_ok): Handle another special case: the one
in which we are moving a symlink onto a hard link to itself.
In this case, we must explicitly tell the caller to unlink the
source file. Otherwise, at least the linux-3.x kernel rename
function would do nothing, as mandated by POSIX 2008.
* tests/mv/symlink-onto-hardlink-to-self: New test.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
Reported by Bernhard Voelker in http://bugs.gnu.org/10686
|
|
Normally, mv detects a few subtle cases in which proceeding with a
same-file rename would, with very high probability, cause data loss.
Here, we have found a corner case in which one of these same-inode
tests makes mv refuse to perform a useful operation. Permit that
corner case.
* src/copy.c (same_file_ok): Detect/exempt this case.
* tests/mv/symlink-onto-hardlink: New test.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
Initially reported by: Matt McCutchen in http://bugs.gnu.org/6960.
Raised again by Anders Kaseorg due to http://bugs.debian.org/654596.
Improved-by: Paul Eggert.
|
|
Run "make update-copyright".
|
|
Run this (twice):
git grep -E -l '`.+'\' src/*.[ch] \
|xargs perl -pi -e 's/`(.+?'\'')/'\''$1/'
|
|
Run this (twice):
git grep -E -l '`[^ ]+'\' src/*.c \
|xargs perl -pi -e 's/`([^ ]+'\'')/'\''$1/'
|
|
Run "make update-copyright".
|
|
* src/copy.c (create_hard_link): A new function refactored
from existing code.
(copy_internal): Call the new function from all 3 locations
that create hard links.
* tests/cp/same-file: Amend to match the adjusted diagnostic.
|
|
* src/copy.c (copy_internal): Adjust formatting style to conform with
guidelines in HACKING: put braces around two one-line "else" blocks.
* tests/cp/existing-perm-dir: Use $(...), not `...`, and
stat rather than ls+cut to get the mode string.
mode=$(stat --p=%A dst/dir)
|
|
* src/copy.c (copy_internal): If we don't create the directory,
then we cannot have omitted permissions. Problem and trivial
fix reported by Eric Lammerts.
* tests/Makefile.am (TESTS): Add cp/existing-perm-dir.
* tests/cp/existing-perm-dir: New file.
|
|
* src/copy.c (copy_internal): With --update (-u), this function would
return early once it found that the destination is not older than the
source, *without* recording the source-dev/ino--to--dest_name mapping.
That mapping is required in order to preserve src hard links in the
destination tree, so when using cp with --update and --preserve=links
(perhaps via -p or -a), cp could fail to preserve one hard link
per inode when at least one of the hard-linked names already exists
in the destination tree.
Reported by Odd Harry Mannsverk in http://debbugs.gnu.org/8419.
* tests/cp/preserve-link: New file. Exercise the flaw/fix.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
|
|
* configure.ac (WARN_CFLAGS): Add -Wsuggest-attribute=const,
-Wsuggest-attribute=pure and -Wsuggest-attribute=noreturn.
(GNULIB_WARN_CFLAGS): But do not add them here... yet.
* src/chown-core.h (chopt_free, uid_to_name): Add function attribute(s).
* src/copy.c (is_ancestor, valid_options): Likewise.
* src/copy.h (chown_failure_ok): Likewise.
* src/dd.c (operand_matches, operand_is): Likewise.
* src/df.c (selected_fstype, excluded_fstype): Likewise.
* src/expr.c (null looks_like_integer): Likewise.
* src/md5sum.c (hex_digits): Likewise.
* src/od.c (get_lcm): Likewise.
* src/pathchk.c (component_start, component_len): Likewise.
* src/pinky.c (count_ampersands): Likewise.
* src/pr.c (cols_ready_to_print): Likewise.
* src/ptx.c (search_table): Likewise.
* src/sort.c (find_unit_order): Likewise.
* src/stty.c (mode_type_flag, string_to_baud, baud_to_value): Likewise.
* src/system.h (gcd, lcm): Likewise.
* src/tr.c (is_char_class_member, look_up_char_class): Likewise.
(star_digits_closebracket): Likewise.
* src/uniq.c (find_field): Likewise.
* src/wc.c (compute_number_width): Likewise.
* lib/xfts.h (cycle_warning_required): Likewise.
* gl/lib/randint.h (randint_get_source): Likewise.
* gl/lib/randperm.c (ceil_lg): Likewise.
* gl/lib/randperm.h (randperm_bound): Likewise.
* lib/strnumcmp.h (strintcmp): Likewise.
|
|
* gnulib: Update to latest.
* src/system.h: Definitions of ST_* macros have moved into the
gnulib module stat-size (specifically, the header file
stat-size.h), so remove them from here.
* src/truncate.c: Include stat-size.h.
* src/stat.c: Likewise.
* src/shred.c: Likewise.
* src/ls.c: Likewise.
* src/du.c: Likewise.
* src/ioblksize.h: New file. Move definition of io_blksize out of
system.h so that system.h does not have to include stat-size.h.
* src/cat.c: Include ioblksize.h.
* src/split.c: Likewise.
* src/copy.c: Include both stat-size.h and ioblksize.h.
* src/Makefile.am (noinst_HEADERS): Add ioblksize.h.
|
|
* src/copy.c (copy_reg): Fix my typo (mis-applied patch).
The patch by Jeff Liu was fine, but I mis-applied it
and introduced a compilation error in commit efa479c1.
2011-05-03 Jim Meyering <meyering@redhat.com>
|
|
* src/copy.c (copy_reg): Multiple uses of quote (s) in an
argument list is erroneous. Use quote_n, instead.
|