| Age | Commit message (Collapse) | Author |
|---|
|
* man/local.mk (.x.1): Use '$(MKDIR_P)' rather than bare 'mkdir'
where appropriate. Reported by Jim Meyering.
|
|
* man/local.mk (mandpep): Rename ...
(mandeps): ... like this. Make $(ALL_MANS) depend on its
content. List 'src/system.h' in here, instead of making
$(ALL_MANS) depend on it explicitly.
(man/*.1): No need to list $(mandep) among the dependencies
any longer.
|
|
* man/local.mk: All of the manpages should depend on 'src/system.h',
and all of them should be cleaned by "make maintainer-clean", that
is, added to MAINTAINERCLEANFILES. Make it be so.
Some minor cosmetic tweakings and reorderings while at it.
|
|
* configure.ac: Adjust and improve few comments.
(MAN): Rename ...
(man1_MANS): ... to this.
Ensure it isn't initialized in all Makefiles (which would lead
to spurious errors), by calling AM_SUBST_NOTMAKE on it.
Also call AM_SUBST_NOTMAKE on 'EXTRA_MANS', for consistency.
* man/local.mk (man1_MANS): Simply define to '@man1_MANS@'.
|
|
And list $(man1_MANS) directly in $(EXTRA_DIST) instead.
This is similar to what is done for $(EXTRA_MANS), thus
improving consistency and readability.
* man/local.mk (dist_man1_MANS): Rename ...
(man1_MANS): ... like this.
(EXTRA_DIST): Add its contents.
* cfg.mk (check-x-vs-1): Fix a botched comment.
|
|
* man/local.mk (man_aux): This was used only once, so inline its
expansion at its sole point of use ...
(EXTRA_DIST): ... here.
|
|
The AC_SUBST'd variable '$(NO_INSTALL_PROGS_DEFAULT)' is only used in
makefile expressions expanding the list of manual pages that are not
built by default (but might need to be when a distribution tarball
is created). Such expressions exploited a feature of make variable
expansion -- namely, $(VAR:%=dir/%.x) -- that, while seemingly quite
portable in practice, is not POSIX-conforming, and could break on
lesser vendor make implementations. So kill two birds with one stone,
by getting rid of the $(NO_INSTALL_PROGS_DEFAULT) intermediate variable
and improving makefile portability in the process.
While at it, we also clean up some other minor naming inconsistency
and useless indirection.
* configure.ac (NO_INSTALL_PROGS_DEFAULT): Don't define or AC_SUBST
anymore; instead ...
(EXTRA_MANS): ... define and AC_SUBST these.
* man/local.mk (extra_man_1): Rename ...
(EXTRA_MANS): ... like this, explicitly making clear it's AC_SUBST'd.
(extra_man_x): It's used only once, no need to define it; just inline
its only expansion where needed.
(EXTRA_DIST): Adjust.
(ALL_MANS): New, union of $(EXTRA_MANS) and $(dist_man1_MANS).
* cfg.mk (check-x-vs-1, sc_option_desc_uppercase): Rely on $(ALL_MANS)
rather than on $(NO_INSTALL_PROGS_DEFAULT) and $(dist_man1_MANS).
|
|
* src/local.mk (dist-hook): Don't use this to ensure all the
programs, even the ones disabled by default or by the user, are
built (doing so is required to ensure the distributed manpages
are properly built). This would build those programs too late
anyway, causing errors like:
$ make dist
make dist-xz am__post_remove_distdir='@:'
make[1]: Entering directory `~/src/coreutils'
GEN man/arch.1
help2man: can't get '--help' info from man/arch.td/arch
make[1]: *** [man/arch.1] Error 127
make[1]: Leaving directory `~/src/coreutils'
make: *** [dist] Error 2
Instead, ...
* man/local.mk (extra_man_x, extra_man_1): define these ...
($(extra_man_1)): ... and make this depend on $(all_programs).
(EXTRA_DIST): Adjust.
Adjust some comments as well.
|
|
This is more natural, now that the top-level Makefile has access to
all the variables and rules once defined only in 'man/Makefile.am'
* man/local.mk (all_programs, sc_option_desc_uppercase,
sc_man_file_correlation check-x-vs-1, check-programs-vs-x): Move
from here ...
* cfg.mk: ... to here. Adjust some comments in the process.
|
|
* Makefile.am: Include 'man/local.mk'.
(SUBDIRS): Remove 'man'.
* configure.ac ($MAN): Adjust so that each of its entries has a leading
'man/' component.
(AC_CONFIG_FILES): Remove 'man/Makefile'.
* man/Makefile.am: Rename ...
* man/local.mk: ... like this. With further adjustments: each 'foo.1'
target renamed like 'man/foo.1', each '../src/foo.c' dependency as
'src/foo.c', and each '$(srcdir)' usage as '$(srcdir)/man'. Also ...
(mandep): Adjust, removing the leading '../' component.
Several whitespace adjustments while at it.
(ASSORT): Remove, it's already defined in the top-level Makefile.am.
* cfg.mk (sc_option_desc_uppercase, sc_man_file_correlation): Remove
the associated recipes, they are now directly available from the
included 'man/local.mk'. Actually, the other changes in this commit
have made these recipes instable and not completely correct, but that
will be fixed in later changes.
|
|
This change is merely required to make future changes easier.
In particular, since we are going to merge the contents of
'man/Makefile.am' into the top-level Makefile, we need to avoid
conflicts with the rules and variables in 'dist-check.mk', and
to prepare for changes in the value of the '$*' variable as used
in the recipe of the '.x -> .1' suffix rule.
* man/Makefile.am (t, mapped_name): Delete, inlining their use ...
(.1.x): ... in the recipe of this suffix rule. Other adjustments
to prepare to changes in the value of the '$*' automatic variable.
While at it, made more resilient about unlikely but possible failure.
Adjust and reorder few comments.
|
|
This is mostly a preparatory change in view of future ones.
* man/Makefile.am (.x.1): Use '$(abs_top_builddir)/src' to access
the 'src' directory.
|
|
* man/Makefile.am: In all the 'foo.1' targets, no need to depend
explicitly on '$(srcdir)/foo.x': the '.x.1' suffix rule takes care
of that automatically.
|
|
* man/Makefile.am: Here.
|
|
This is mostly a preparatory refactoring in view of future changes.
* man/Makefile.am (common_dep): Rename ...
(mandep): ... like this.
All usages adjusted.
|
|
* man/Makefile.am (sc_option_desc_uppercase): Here.
|
|
* man/Makefile.am (EXTRA_DIST): Describe portability issues of the
idiom we now use. Reformat the definition a little while at it.
|
|
* man/Makefile.am (SUFFIXES): Remove definition: Automake is smart
enough to extract the list of suffixes from the '.x.1' suffix rule
automatically.
|
|
* man/hostid.x: Add gethostid(3) to SEE ALSO section.
Addresses http://bugs.gnu.org/12023
|
|
* man/sort.x: Add SEE ALSO section with entry uniq(1).
* man/uniq.x: Add sort(1) to SEE ALSO section.
|
|
* README: Omit "su" from list of programs.
* src/su.c: Remove file.
* src/Makefile.am: Remove su-related rules and variables.
* tests/misc/su-fail: Remove test.
* tests/Makefile.am (TESTS): Remove misc/su-fail.
* tests/misc/invalid-opt: Remove su-related code.
* src/.gitignore: Remove su.
* man/su.x: Remove file.
* man/Makefile.am (su.1): Remove rule.
* po/POTFILES.in: Remove su.c from the list.
* TODO: Remove ancient entry.
* NEWS (Changes in behavior): Mention it.
* doc/coreutils.texi: Remove su-related description.
* AUTHORS: Remove su.
* m4/lib-check.m4 (cu_LIB_CHECK): Remove file/macro.
* configure.ac: Remove su-related code and sole use of cu_LIB_CHECK.
* scripts/git-hooks/commit-msg: Remove su from this list, too.
|
|
These were identified using: https://github.com/lyda/misspell-check
executed like: git ls-files | misspellings -f -
* src/cat.c: Correct a spelling error.
* src/comm.c: Likewise.
* src/expr.c: Likewise.
* src/pr.c: Likewise.
* src/tac.c: Likewise.
* src/test.c: Likewise.
* src/ChangeLog-2005: Likewise.
* src/ChangeLog-2007: Likewise.
* src/NEWS: Likewise.
* src/doc/coreutils.texi: Likewise.
* src/lib/ChangeLog-2007: Likewise.
* src/man/help2man: Likewise.
* src/old/fileutils/ChangeLog-1997: Likewise.
* src/old/fileutils/NEWS: Likewise.
* src/old/sh-utils/ChangeLog.0: Likewise.
* src/old/textutils/ChangeLog: Likewise.
* src/tests/misc/comm: Likewise.
* src/tests/misc/uniq: Likewise.
* src/tests/mv/dir2dir: Likewise.
* src/cfg.mk (old_NEWS_hash): update with `make update-NEWS-hash`
|
|
Run "make update-copyright".
|
|
* doc/coreutils.texi (Formatting the file names):
coreutils now quotes 'like this'.
* man/help2man:
* src/timeout.c (usage): Quote 'like this' in diagnostics.
* HACKING, Makefile.am, NEWS, README, README-hacking, TODO, cfg.mk:
* doc/Makefile.am, doc/coreutils.texi, m4/jm-macros.m4:
* man/Makefile.am, man/help2man, src/Makefile.am, src/copy.h:
* src/extract-magic, src/ls.c, src/pinky.c, src/pr.c, src/sort.c:
* src/split.c, src/timeout.c, src/who.c, tests/dd/skip-seek-past-file:
* tests/pr/pr-tests: Quote 'like this' in commentary.
* cfg.mk (old_NEWS_hash): Update due to changed old NEWS.
|
|
* tests/misc/timeout-parameters: Verify that the timer doesn't
fire immediately in the problematic range, and avoid overflow
checks in that case.
* man/timeout.x: Mention the possible bug.
Reported by Bruno Haible
|
|
This program is compatible with other realpath(1)
implementations, and also incorporates relpath like support,
through the --relative options. The relpath support
was suggested by Peng Yu, who also provided an initial
implemenation of that functionality.
* AUTHORS: Add my name.
* NEWS: Mention the new command.
* README: Likewise.
* doc/coreutils.texi (realpath invocation): Add realpath info.
* man/Makefile.am (realpath.1): Add dependency.
* man/realpath.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/realpath.c.
* src/.gitignore: Exclude realpath.
* src/Makefile.am (EXTRA_PROGRAMS): Add realpath.
* src/realpath.c: New file.
* scripts/git-hooks/commit-msg: Add realpath to the list of prefixes.
* tests/Makefile.am (TESTS): Add misc/realpath.
* tests/misc/realpath: New file.
|
|
Run "make update-copyright".
|
|
At the moment, things like man/arch.1 are not included in the tarball.
This makes perl a requirement if you want to build/install the arch
helper.
* man/Makefile.am (EXTRA_DIST): Add $(NO_INSTALL_PROGS_DEFAULT:%=%.1).
|
|
man-pages(7) explicitly says about SEE ALSO sections: "Do not terminate
this with a period." This is also in line with all the other man pages
in coreutils.
* man/cat.x: Remove period at the end of the SEE ALSO section.
* man/tac.x: Likewise.
|
|
Run "make update-copyright".
|
|
* cfg.mk (LINE_LEN_MAX, FILTER_LONG_LINES): New macros.
(sc_long_lines): New rule.
* HACKING: Use shorter URLs to the same material.
* doc/Makefile.am, doc/coreutils.texi, m4/boottime.m4:
* man/help2man, man/stdbuf.x, src/Makefile.am, src/cat.c, src/copy.c:
* src/cp.c, src/dd.c, src/df.c, src/du.c, src/groups.c, src/install.c:
* src/ls.c, src/md5sum.c, src/mv.c, src/od.c, src/pinky.c, src/ptx.c:
* src/readlink.c, src/remove.c, src/rmdir.c, src/setuidgid.c:
* src/sort.c, src/tail.c, src/touch.c, tests/Coreutils.pm:
* tests/cp/existing-perm-race, tests/cp/perm, tests/cp/preserve-gid:
* tests/du/2g, tests/du/long-from-unreadable, tests/init.sh:
* tests/install/basic-1, tests/ls/nameless-uid:
* tests/ls/readdir-mountpoint-inode, tests/misc/chroot-credentials:
* tests/misc/cut, tests/misc/date, tests/misc/join, tests/misc/md5sum:
* tests/misc/sha1sum, tests/misc/sha224sum, tests/misc/sort:
* tests/misc/sort-continue, tests/misc/sort-files0-from:
* tests/misc/sort-rand, tests/misc/stdbuf, tests/misc/tr:
* tests/misc/uniq, tests/mv/atomic, tests/mv/part-fail:
* tests/mv/part-symlink, tests/mv/sticky-to-xpart, tests/pr/pr-tests:
* tests/rm/fail-2eperm, tests/rm/interactive-always:
Reformat to fit within 80 columns.
* doc/Makefile.am (BAD_POSIX_PERL): New macro.
* doc/coreutils.texi: Reword slightly, to make menus and
index lines shorter.
* src/md5sum.c: Redo --help output so that it fits within 79
columns, since that's a bit more portable and all the other --help
strings fit in 79 columns.
|
|
* man/cat.x: See also "tac".
|
|
* doc/coreutils.texi (md5sum invocation): Mention currently known
security problems. Don't recommend SHA-1 as alternative.
* man/md5sum.x (BUGS): Warn about the vulnerabilities and
reference the SHA-2 based alternatives.
Reported by Simon Josefsson
|
|
These checks were not being run as distcheck-hook targets
are only supported in the top-level Makefile. Instead
these tests are now run during a syntax-check.
* cfg.mk (sc_man_file_correlation): A new syntax check to
call the 2 existing tests to check the correlation between
the programs and man/*.[1x].
* man/Makefile.am (sc_man_file_correlation): Call the 2 existing
man page correlation tests.
(check-x-vs-1): Remove the "GEN" annotation as it's a bit verbose.
(check-programs-vs-x): Likewise.
* src/Makefile.am (all_programs.list): Exclude libstdbuf.so
from the list of programs. This issue was not noticed as
the checks were not actually being run.
|
|
* src/base64.c (usage): Don't capitalize the first character
in an --option description.
* src/stdbuf.c (usage): Likewise.
* src/truncate.c (usage): Likewise.
* cfg.mk (sc_option_desc_uppercase): A new syntax check to
stop this happening in future.
* man/Makefile.am (sc_option_desc_uppercase): Ensure all
man pages are generated, then search for erroneous uppercase chars.
* src/Makefile.am (all_programs): Ensure all
commands are built so that all man pages can be generated.
|
|
* doc/coreutils.texi (dirname invocation): Properly cover behavior
on directory.
* man/dirname.x: Likewise.
* THANKS: Update.
Reported by Emmanuel Lacour.
|
|
* man/tac.x: See also "rev".
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
* AUTHORS: Add my name.
* NEWS: Mention it.
* README: Likewise.
* bootstrap.conf (gnulib_modules): Add nproc.
* doc/coreutils.texi (nproc invocation): Add nproc info.
* man/Makefile.am (nproc.1): Add dependency.
* man/nproc.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/nproc.c.
* src/.gitignore: Exclude nproc.
* src/Makefile.am (EXTRA_PROGRAMS): Add nproc.
* src/nproc.c: New file.
* tests/Makefile.am (TESTS): Add misc/nproc-{avail,positive}.
* tests/misc/nproc-avail: New file.
* tests/misc/nproc-positive: New file.
|
|
* src/system.h: Rename emit_bug_reporting_address() to
emit_ancillary_info() and update it to not print the translation
project address in en_* locales, and _do_ print it in the 'C'
(and other) locales so that it's included in the default man page.
Also mention how to invoke the texinfo documentation for each command.
Also move the "hard-locale.h" include to the 8 files that now use it.
* man/help2man: Strip the newly added texinfo reference from the
--help output as a more verbose version is already added by help2man.
Suggestion from C de-Avillez
|
|
* man/Makefile.am (check-x-vs-1): Using a fixed-name temporary file
is better than one ending in -$$, because many -$$-suffixed files
may accumulate over time.
|
|
* src/readlink.c (usage): Adjust one-line summary.
* man/readlink.x: Likewise.
Suggested by Kamil Dudka.
|
|
|
|
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add stdbuf command to list.
* configure.ac: Only enable on ELF systems with GCC.
* cfg.mk (sc_system_h_headers): Use VC_LIST_EXCEPT rather than
VC_LIST, so we can add an exception, if needed.
* .x-sc_system_h_headers: New file. Exempt libstdbuf.c.
* Makefile.am (syntax_check_exceptions): Add .x-sc_system_h_headers.
* doc/coreutils.texi (stdbuf invocation): Add stdbuf info.
* man/.gitignore: Ignore generated manpage.
* src/.gitignore: Ignore stdbuf and libstdbuf.so binaries.
* man/Makefile.am (stdbuf.1): Add dependency.
* man/stdbuf.x: New file with example usage.
* po/POTFILES.in: Reference new command and shared library sources.
* src/Makefile.am (build_if_possible__progs): Add stdbuf and libstdbuf,
(pkglib_PROGRAMS): Reference optional shared lib,
(libstdbuf_so_LDADD): Ensure we don't link with non PIC libcoreutils.a.
(libstdbuf_so_LDFLAGS): Add -shared GCC option,
(libstdbuf_so_CFLAGS): Add -fPIC GCC option.
(check-README): Exclude libstbuf.
(check-AUTHORS): ditto.
(sc_tight_scope): Exclude functions starting with __.
* src/libstdbuf.c: The LD_PRELOAD shared library to control buffering.
* src/stdbuf.c: New file to setup env variables before execing command.
* tests/Makefile.am: Reference new test file.
* tests/misc/help-version: Set expected exit codes.
* tests/misc/invalid-opt: ditto.
* tests/misc/stdbuf: Add 9 tests.
|
|
This should help people notice that they are generated.
Note: each file already has a comment to that effect from help2man.
* man/Makefile.am (.x.1): Make generated files read-only.
Also, don't redirect directly to the target, $@.
|
|
* man/Makefile.am (.x.1, check-x-vs-1, check-programs-vs-x):
Mark with $(AM_V_GEN), so that automake-1.11 prints
"GEN $@" by default (stick with "GEN" in spite of the latter two
rules not officially generating anything -- they're just tests).
|
|
* src/comm.c (usage): give more information on the -123 parameters,
with examples to show that they can be combined.
Addresses <http://savannah.gnu.org/bugs/?24974>.
* doc/coreutils.texi (comm invocation): Mention that the
column separators are suppressed along with the column.
Suggestion from Dan Jacobson.
* man/comm.x: Reference other commands that match adjacent lines.
* man/join.x: ditto.
* man/uniq.x: ditto.
|
|
* maint.mk (sc_makefile_TAB_only_indentation): New rule.
Replace each TAB+8-space sequence with two TABs.
* man/Makefile.am: Likewise.
* build-aux/check.mk: Likewise.
I used this command (run it more than once, if needed):
t=$'\t'; git grep -l -E "$t {8}"|grep -E 'Makefile|\.mk$' \
| xargs perl -pi -e 's/\t {8}/\t\t/'
|
|
* man/truncate.x: Fix spelling.
* THANKS: Update.
|
|
* src/id.c (usage): Improve description, based on a suggestion
from Brian M. Carlson in http://bugs.debian.org/514675
* man/id.x: Use a better one-liner, based on the one at top of id.c.
|
