| Age | Commit message (Collapse) | Author |
|---|
|
* man/chmod.x: Don't rely on the bold markup for 'a' to
distinguish it as that's not done in all cases.
|
|
* man/chmod.x: s/[+-=]/[-+=]/
* doc/perm.texi (Symbolic Modes): Likewise.
* THANKS.in: Remove patch owner.
Fixes http://bugs.gnu.org/17041
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
Although the above man pages depend on src/md5sum.c as a shared
source, the build of the man pages directly requires their own
executables to exist.
* man/local.mk (man/sha1sum.1): Change the dependency from
'src/md5sum' to 'src/sha1sum'.
(man/sha224sum.1): s/md5sum/sha224sum/
(man/sha256sum.1): s/md5sum/sha256sum/
(man/sha384sum.1): s/md5sum/sha384sum/
(man/sha512sum.1): s/md5sum/sha512sum/
Reported by Pádraig Brady in
http://lists.gnu.org/archive/html/coreutils/2013-11/msg00006.html
|
|
Commit cde1ea0e separated the coreutils-specific patches from help2man.
Most changes had been made to accommodate to the coreutils style guide,
i.e., to avoid syntax-check failures like sc_long_lines.
Yet 2 changes had to be put into the patch help2man.diff.
But this added the dependency to patch(1) in distribution builds.
Incidentally, the 2 remaining parts of the patch can easily be
done outside of help2man. Therefore, this commit partly reverts
the recent separation of help2man into 'help2man.in' and
'help2man.diff', and instead uses the original help2man script.
* man/help2man.in: Rename to ...
* man/help2man: ... this file.
* man/help2man.diff: Remove.
* man/local.mk (mandeps): Remove man/help2man.
(man/help2man): Remove recipe.
(.x.1): Add the --info-page option when calling help2man in order
to change the name of the texinfo manual from the default, "info PRG",
to "info coreutils 'PRG invocation'".
Furthermore, use an sed pattern to remove the sentence starting
with "For complete documentation".
* .gitignore (/man/help2man): Remove entry.
* .x-update-copyright: Replace the entries for the files
'man/help2man.diff' and 'man/help2man.in' by 'man/help2man'.
* cfg.mk (sc_long_lines): Instead of 'man/help2man.in', exempt
'man/help2man' from this test.
(sc_po_check): Likewise.
(sc_space_tab): Instead of 'man/help2man.diff', exempt 'man/help2man'
from this test.
(sc_trailing_blank): Likewise.
(sc_prohibit_tab_based_indentation): Instead of 'man/help2man.in' and
'man/help2man.diff', exempt 'man/help2man'.
* man/dummy-man: Recognize the option --info-page=... as no-op.
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/6038769
The previously committed 'help2man' requires a Perl module
which does not seem to be installed everywhere - and which
is not needed for our purposes:
Can't locate Locale/gettext.pm in @INC
BEGIN failed--compilation aborted at ./man/help2man line 28.
This module was pulled in automatically by the default configure call.
Use the NLS-disabled version instead.
* man/help2man.in: Use help2man configured with the --disable-nls
option to avoid the dependency to the above Perl module.
* man/help2man.diff: Adapt the line numbers of the hunks in the
coreutils-specific patch for help2man to apply without fuzz.
Reported by Pádraig Brady.
|
|
Instead of diverging further from the upstream GNU help2man project
(http://www.gnu.org/software/help2man/), hold a copy of the original
script and keep track of our changes in a separate patch file.
The man pages created with the new version show the following,
non-invasive differences:
a) command options in the EXAMPLE sections are no longer in bold format,
b) file names are underlined now consistently.
* man/help2man: Rename to ...
* man/help2man.in: ... this file, and update content from the
upstream GNU help2man project.
* man/help2man.diff: Add patch file for help2man to remove the
sentence "For complete documentation ..." (see commit 5d4f09d8),
and to emit "info coreutils 'PROG invocation'" into the man
pages (77abf69a).
* man/local.mk (mandeps): Add help2man to the dependencies of
the man pages.
(man/help2man): Add rule to generate this script from the upstream
help2man.in file and the help2man.diff patch.
* .gitignore: Add man/help2man as it is no longer version controlled.
* cfg.mk (sc_long_lines): Exempt help2man.in from this check.
(sc_po_check): Likewise.
(sc_space_tab): Likewise.
(sc_trailing_blank): Exempt man/help2man.diff from this check.
(sc_prohibit_tab_based_indentation): Instead of help2man, now exempt
both help2man.in and help2man.diff from this test.
* .x-update-copyright: Add new file and add the above new help2man
files as well as the COPYING file.
|
|
* man/df.x: Don't say that a dev node is always on the root file system.
* doc/coreutils.texi (df invocation): Likewise. Also state that the
device node to mounted file system interpretation is only done when
passed absolute paths to device nodes.
|
|
Use the more portable 'chmod a-w', instead of the 'chmod -w' form.
The latter is not always supported. Also its operation is
dependent on umask controlling the permissions bits for new files,
which is not the case in the presence of POSIX default ACLs for e.g.
In that case, chmod may print a warning like the following, and
exit with failure status:
chmod: man/hostid.1-t: new permissions are r--rw-r--, not r--r--r--
* man/local.mk: s/-w/a-w/
|
|
* AUTHORS: Add my name.
* NEWS: Mention the new program.
* README: Reference the new program.
* src/numfmt.c: New file.
* src/.gitignore: Ignore the new binary.
* build-aux/gen-lists-of-programs.sh: Update.
* scripts/git-hooks/commit-msg: Allow numfmt: commit prefix.
* po/POTFILES.in: Add new c file.
* tests/misc/numfmt.pl: A new test file giving >93% coverage.
* tests/local.mk: Reference the new test.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* man/numfmt.x: A new template.
* doc/coreutils.texi: Document the new command.
|
|
* man/od.x: s/-w 16/-w16/ as -w takes an optional
parameter and so the space is significant.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* src/od.c: Redorder the information output by --help
to ease interpretation and so that appropriate sections
are generated by help2man.
* doc/coreutils.texi (od invocation): Fix an incorrect
reference to @var{n}, which should be @var{bytes}.
* man/od.x: Add an "Examples" section, and move the
default od format to there, and add a commonly required
format to generate hexdumps.
Reported by Akim Demaille in http://bugs.gnu.org/13280.
|
|
This allows efficient processing of multiple files,
while also increasing compatibility with BSD's readlink(1).
We also add the -z, --zero option to delimit output items
with the NUL character which disambiguates output in the
presence of '\n' characters.
* src/readlink.c (usage): Add the --zero description,
and also adjust the description of --no-newline accordingly.
(main): Handle the -z option and iterate over multiple arguments.
Also as in commit v8.15-24-g9d46b25 we use fputs() and putchar()
rather than printf() for performance reasons.
* doc/coreutils.texi (readlink invocation): Document the
new --zero option, adjust the --no-newline description, and
tweak the general info to indicate multiple files are supported.
* tests/readlink/multi.sh: A new test for the new functionality.
* tests/local.mk: Reference the new test.
* man/readlink.x: Adjust the summary and also reference realpath.
* NEWS: Mention the improvement.
* THANKS.in: Suggested by Aaron Davies.
|
|
* doc/coreutils.texi (nice invocation): Ensure there is no
ambiguity in the summary in relation to nice being able
to adjust the niceness of an existing process.
Reference the renice command.
* man/nice.x: Reference renice (1)
|
|
Since commit v8.19-118-g57da212, our 'dist-hook' rule tweaked the
distributed Makefile.in to make each man page 'man/foo.1' depend
on the corresponding source 'src/foo.c' rather than the corresponding
program 'src/foo'. That was done to accommodate systems without
perl, which cannot run help2man to regenerate the manpage after
its corresponding program has been built.
This seems a right and proper graceful degradation, in that the
man pages dependencies are still 100% correct in a git checkout,
while being more lax but "more portable" in a distribution tarball.
Alas, that is not the case in practice, as it turns out the tweaked
Makefile makes the building of man pages unreliable and potentially
incorrect!
In fact, assume that instead of the correct a dependency:
man/ls.1: src/ls
we have the laxer one:
man/ls.1: src/ls.c
and think of what happens if a user modifies, say, 'src/ls.c', and then
runs "make -j4" to rebuild everything. The make process will see that
it has to rebuild the man page 'man/ls.1' (because its prerequisite
'src/ls.c' has changed), but won't see that it has to rebuild 'src/ls'
*before* re-running 'help2man' to generate that man page; so, if
'man/ls.1' is rebuilt before 'src/ls' (which can happen with concurrent
make), our user will get either a build error (if 'src/ls' did non
exist) or, worse, a man page with an up-to-date timestamp but an
out-of-date content. And what's even worse in all of this is that
this problem will be present also for users who have perl installed:
this is not a "graceful degradation" at all!
In our situation, the best and simplest way to implement a graceful
degradation it to keep the correct dependencies for man pages (that
is, "man/ls.1: src/ls"), and if perl is not present, just generate
dummy man pages reporting that built-time issue and redirecting the
user back to either the info documentation or the '--help' output.
As a consequence of this change, we also stop distributing man pages,
since they will now be generated unconditionally.
* Makefile.am (do-not-require-help2man): Remove.
(dist-hook): Don't depend on it.
* man/local.mk: Remove an obsolete comment.
(EXTRA_DIST): Stop distributing generated man pages.
($(EXTRA_MANS)): This no longer needs to depend on $(all_programs).
(MAINTAINERCLEANFILES): $(ALL_MANS) Do not list it here, and ...
(CLEANFILES): ... list it here, instead.
(.x.1): Instead of warning if perl is missing, but then trying to run
'help2man' unconditionally, simply run ...
(run_help2man): ... the command referenced by this new variable, that
expands to a proper invocation of 'help2man' if perl is present, and
to an invocation of a shell script generating a dummy manpage if it
is not.
(EXTRA_DIST): Distribute that shell script.
* man/dummy-man: New shell script.
* NEWS (Build-related): Mention this.
Fixes coreutils http://bugs.gnu.org/12715.
|
|
* man/local.mk (man/dir.1): Depend on src/dir, not src/ls.
|
|
* man/local.mk: With commit v8.19-84-g08cf455, man page creation
would fail when using a build directory name containing e.g.,
spaces.
|
|
* man/local.mk: Creating a prog.1 man page requires running
src/prog --help.
List the exceptions, e.g., install.1 depends on src/ginstall
and arch.1 depends on src/uname.
|
|
* man/local.mk (distclean-local): Remove $(ALL_MANS) when doing
a VPATH build. If it's not done, generated manpages can be left
around in the build directory after a "make distclean", causing
failures in "make distcheck".
|
|
* man/local.mk (.x.1): Use '$(MKDIR_P)' rather than bare 'mkdir'
where appropriate. Reported by Jim Meyering.
|
|
* man/local.mk (mandpep): Rename ...
(mandeps): ... like this. Make $(ALL_MANS) depend on its
content. List 'src/system.h' in here, instead of making
$(ALL_MANS) depend on it explicitly.
(man/*.1): No need to list $(mandep) among the dependencies
any longer.
|
|
* man/local.mk: All of the manpages should depend on 'src/system.h',
and all of them should be cleaned by "make maintainer-clean", that
is, added to MAINTAINERCLEANFILES. Make it be so.
Some minor cosmetic tweakings and reorderings while at it.
|
|
* configure.ac: Adjust and improve few comments.
(MAN): Rename ...
(man1_MANS): ... to this.
Ensure it isn't initialized in all Makefiles (which would lead
to spurious errors), by calling AM_SUBST_NOTMAKE on it.
Also call AM_SUBST_NOTMAKE on 'EXTRA_MANS', for consistency.
* man/local.mk (man1_MANS): Simply define to '@man1_MANS@'.
|
|
And list $(man1_MANS) directly in $(EXTRA_DIST) instead.
This is similar to what is done for $(EXTRA_MANS), thus
improving consistency and readability.
* man/local.mk (dist_man1_MANS): Rename ...
(man1_MANS): ... like this.
(EXTRA_DIST): Add its contents.
* cfg.mk (check-x-vs-1): Fix a botched comment.
|
|
* man/local.mk (man_aux): This was used only once, so inline its
expansion at its sole point of use ...
(EXTRA_DIST): ... here.
|
|
The AC_SUBST'd variable '$(NO_INSTALL_PROGS_DEFAULT)' is only used in
makefile expressions expanding the list of manual pages that are not
built by default (but might need to be when a distribution tarball
is created). Such expressions exploited a feature of make variable
expansion -- namely, $(VAR:%=dir/%.x) -- that, while seemingly quite
portable in practice, is not POSIX-conforming, and could break on
lesser vendor make implementations. So kill two birds with one stone,
by getting rid of the $(NO_INSTALL_PROGS_DEFAULT) intermediate variable
and improving makefile portability in the process.
While at it, we also clean up some other minor naming inconsistency
and useless indirection.
* configure.ac (NO_INSTALL_PROGS_DEFAULT): Don't define or AC_SUBST
anymore; instead ...
(EXTRA_MANS): ... define and AC_SUBST these.
* man/local.mk (extra_man_1): Rename ...
(EXTRA_MANS): ... like this, explicitly making clear it's AC_SUBST'd.
(extra_man_x): It's used only once, no need to define it; just inline
its only expansion where needed.
(EXTRA_DIST): Adjust.
(ALL_MANS): New, union of $(EXTRA_MANS) and $(dist_man1_MANS).
* cfg.mk (check-x-vs-1, sc_option_desc_uppercase): Rely on $(ALL_MANS)
rather than on $(NO_INSTALL_PROGS_DEFAULT) and $(dist_man1_MANS).
|
|
* src/local.mk (dist-hook): Don't use this to ensure all the
programs, even the ones disabled by default or by the user, are
built (doing so is required to ensure the distributed manpages
are properly built). This would build those programs too late
anyway, causing errors like:
$ make dist
make dist-xz am__post_remove_distdir='@:'
make[1]: Entering directory `~/src/coreutils'
GEN man/arch.1
help2man: can't get '--help' info from man/arch.td/arch
make[1]: *** [man/arch.1] Error 127
make[1]: Leaving directory `~/src/coreutils'
make: *** [dist] Error 2
Instead, ...
* man/local.mk (extra_man_x, extra_man_1): define these ...
($(extra_man_1)): ... and make this depend on $(all_programs).
(EXTRA_DIST): Adjust.
Adjust some comments as well.
|
|
This is more natural, now that the top-level Makefile has access to
all the variables and rules once defined only in 'man/Makefile.am'
* man/local.mk (all_programs, sc_option_desc_uppercase,
sc_man_file_correlation check-x-vs-1, check-programs-vs-x): Move
from here ...
* cfg.mk: ... to here. Adjust some comments in the process.
|
|
* Makefile.am: Include 'man/local.mk'.
(SUBDIRS): Remove 'man'.
* configure.ac ($MAN): Adjust so that each of its entries has a leading
'man/' component.
(AC_CONFIG_FILES): Remove 'man/Makefile'.
* man/Makefile.am: Rename ...
* man/local.mk: ... like this. With further adjustments: each 'foo.1'
target renamed like 'man/foo.1', each '../src/foo.c' dependency as
'src/foo.c', and each '$(srcdir)' usage as '$(srcdir)/man'. Also ...
(mandep): Adjust, removing the leading '../' component.
Several whitespace adjustments while at it.
(ASSORT): Remove, it's already defined in the top-level Makefile.am.
* cfg.mk (sc_option_desc_uppercase, sc_man_file_correlation): Remove
the associated recipes, they are now directly available from the
included 'man/local.mk'. Actually, the other changes in this commit
have made these recipes instable and not completely correct, but that
will be fixed in later changes.
|
|
This change is merely required to make future changes easier.
In particular, since we are going to merge the contents of
'man/Makefile.am' into the top-level Makefile, we need to avoid
conflicts with the rules and variables in 'dist-check.mk', and
to prepare for changes in the value of the '$*' variable as used
in the recipe of the '.x -> .1' suffix rule.
* man/Makefile.am (t, mapped_name): Delete, inlining their use ...
(.1.x): ... in the recipe of this suffix rule. Other adjustments
to prepare to changes in the value of the '$*' automatic variable.
While at it, made more resilient about unlikely but possible failure.
Adjust and reorder few comments.
|
|
This is mostly a preparatory change in view of future ones.
* man/Makefile.am (.x.1): Use '$(abs_top_builddir)/src' to access
the 'src' directory.
|
|
* man/Makefile.am: In all the 'foo.1' targets, no need to depend
explicitly on '$(srcdir)/foo.x': the '.x.1' suffix rule takes care
of that automatically.
|
|
* man/Makefile.am: Here.
|
|
This is mostly a preparatory refactoring in view of future changes.
* man/Makefile.am (common_dep): Rename ...
(mandep): ... like this.
All usages adjusted.
|
|
* man/Makefile.am (sc_option_desc_uppercase): Here.
|
|
* man/Makefile.am (EXTRA_DIST): Describe portability issues of the
idiom we now use. Reformat the definition a little while at it.
|
|
* man/Makefile.am (SUFFIXES): Remove definition: Automake is smart
enough to extract the list of suffixes from the '.x.1' suffix rule
automatically.
|
|
* man/hostid.x: Add gethostid(3) to SEE ALSO section.
Addresses http://bugs.gnu.org/12023
|
|
* man/sort.x: Add SEE ALSO section with entry uniq(1).
* man/uniq.x: Add sort(1) to SEE ALSO section.
|
|
* README: Omit "su" from list of programs.
* src/su.c: Remove file.
* src/Makefile.am: Remove su-related rules and variables.
* tests/misc/su-fail: Remove test.
* tests/Makefile.am (TESTS): Remove misc/su-fail.
* tests/misc/invalid-opt: Remove su-related code.
* src/.gitignore: Remove su.
* man/su.x: Remove file.
* man/Makefile.am (su.1): Remove rule.
* po/POTFILES.in: Remove su.c from the list.
* TODO: Remove ancient entry.
* NEWS (Changes in behavior): Mention it.
* doc/coreutils.texi: Remove su-related description.
* AUTHORS: Remove su.
* m4/lib-check.m4 (cu_LIB_CHECK): Remove file/macro.
* configure.ac: Remove su-related code and sole use of cu_LIB_CHECK.
* scripts/git-hooks/commit-msg: Remove su from this list, too.
|
|
These were identified using: https://github.com/lyda/misspell-check
executed like: git ls-files | misspellings -f -
* src/cat.c: Correct a spelling error.
* src/comm.c: Likewise.
* src/expr.c: Likewise.
* src/pr.c: Likewise.
* src/tac.c: Likewise.
* src/test.c: Likewise.
* src/ChangeLog-2005: Likewise.
* src/ChangeLog-2007: Likewise.
* src/NEWS: Likewise.
* src/doc/coreutils.texi: Likewise.
* src/lib/ChangeLog-2007: Likewise.
* src/man/help2man: Likewise.
* src/old/fileutils/ChangeLog-1997: Likewise.
* src/old/fileutils/NEWS: Likewise.
* src/old/sh-utils/ChangeLog.0: Likewise.
* src/old/textutils/ChangeLog: Likewise.
* src/tests/misc/comm: Likewise.
* src/tests/misc/uniq: Likewise.
* src/tests/mv/dir2dir: Likewise.
* src/cfg.mk (old_NEWS_hash): update with `make update-NEWS-hash`
|
|
Run "make update-copyright".
|
|
* doc/coreutils.texi (Formatting the file names):
coreutils now quotes 'like this'.
* man/help2man:
* src/timeout.c (usage): Quote 'like this' in diagnostics.
* HACKING, Makefile.am, NEWS, README, README-hacking, TODO, cfg.mk:
* doc/Makefile.am, doc/coreutils.texi, m4/jm-macros.m4:
* man/Makefile.am, man/help2man, src/Makefile.am, src/copy.h:
* src/extract-magic, src/ls.c, src/pinky.c, src/pr.c, src/sort.c:
* src/split.c, src/timeout.c, src/who.c, tests/dd/skip-seek-past-file:
* tests/pr/pr-tests: Quote 'like this' in commentary.
* cfg.mk (old_NEWS_hash): Update due to changed old NEWS.
|
|
* tests/misc/timeout-parameters: Verify that the timer doesn't
fire immediately in the problematic range, and avoid overflow
checks in that case.
* man/timeout.x: Mention the possible bug.
Reported by Bruno Haible
|
|
This program is compatible with other realpath(1)
implementations, and also incorporates relpath like support,
through the --relative options. The relpath support
was suggested by Peng Yu, who also provided an initial
implemenation of that functionality.
* AUTHORS: Add my name.
* NEWS: Mention the new command.
* README: Likewise.
* doc/coreutils.texi (realpath invocation): Add realpath info.
* man/Makefile.am (realpath.1): Add dependency.
* man/realpath.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/realpath.c.
* src/.gitignore: Exclude realpath.
* src/Makefile.am (EXTRA_PROGRAMS): Add realpath.
* src/realpath.c: New file.
* scripts/git-hooks/commit-msg: Add realpath to the list of prefixes.
* tests/Makefile.am (TESTS): Add misc/realpath.
* tests/misc/realpath: New file.
|
|
Run "make update-copyright".
|
|
At the moment, things like man/arch.1 are not included in the tarball.
This makes perl a requirement if you want to build/install the arch
helper.
* man/Makefile.am (EXTRA_DIST): Add $(NO_INSTALL_PROGS_DEFAULT:%=%.1).
|
|
man-pages(7) explicitly says about SEE ALSO sections: "Do not terminate
this with a period." This is also in line with all the other man pages
in coreutils.
* man/cat.x: Remove period at the end of the SEE ALSO section.
* man/tac.x: Likewise.
|
|
Run "make update-copyright".
|
