Age | Commit message (Collapse) | Author |
|
* AUTHORS: Register as the author
* NEWS: Mention this change
* README: Add truncate command to list
* src/truncate.c: New command
* src/Makefile.am: Add truncate command to list to build
* src/.gitignore: Add truncate binary to list to ignore
* doc/coreutils.texi (truncate invocation): Add truncate info
* man/Makefile.am: Add truncate man page to list to build
* man/truncate.x: Add truncate man page template
* po/POTFILES.in: Add truncate to list to translate
* tests/Makefile.am: Add truncate tests
* tests/misc/help-version: Add support for new truncate command
* tests/misc/truncate-dangling-symlink: check dangling link ok
* tests/misc/truncate-dir-fail: ensure dirs fail
* tests/misc/truncate-fail-diag: validate messages for missing paths
* tests/misc/truncate-fifo: ensure fifos ignored
* tests/misc/truncate-no-create-missing: ensure -c option honoured
* tests/misc/truncate-overflow: check signed integer overflows
* tests/misc/truncate-owned-by-other: root permissions check
* tests/misc/truncate-parameters: check invalid parameter combinations
* tests/misc/truncate-relative: check invalid relative sizes
|
|
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add timeout command to list.
* src/timeout.c: New file.
* src/kill.c (operand2sig): Move function to its own file,
now that timeout.c will also use it.
* src/operand2sig.c (operand2sig): New file, extracted from kill.c.
* src/operand2sig.h (operand2sig): Declare.
* src/Makefile.am (EXTRA_PROGRAMS): Add timeout.
* src/.gitignore: Add timeout binary to list to ignore.
* doc/coreutils.texi (timeout invocation): Add timeout info.
(Signal specifications): New section, also referenced by kill.
* man/Makefile.am (timeout.1): Add dependency.
* man/timeout.x: New file.
* po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate.
* tests/Makefile.am (TESTS): Add the two new tests.
* tests/misc/help-version: Add support for new timeout command.
* tests/misc/invalid-opt: Add support for new timeout command.
* tests/misc/timeout: New file: check basic timeout operation.
* tests/misc/timeout-parameters: New file: check invalid parameter
combinations.
|
|
* man/Makefile.am: Use dist_man1_MANS instead of dist_man_MANS.
Suggestion from Ralf Wildenhues.
|
|
* man/Makefile.am (dist_man_MANS): Add a literal, rm.1.
Without this, "make install" would not install man pages.
However, with this kludge, the rm.1 man page is installed
even when you configure with --enable-no-install-program=rm.
|
|
Revert 4b544e447eb78fd1f031a026a499f6aed177808a.
* man/Makefile.am: That change was only a band-aid. It solved
the stated problem, but not a deeper one: that "make install"
would no longer man pages. Reported by Dmitry V. Levin.
The latter problem arose in
167b8025aca487de001da2448c1aebc2747bc1d3 with the removal of
the sole literal from the definition of dist_man_MANS. When
automake perceives dist_man_MANS as empty, it no longer emits
the install-man* rules.
|
|
* man/Makefile.am (BUILT_SOURCES): Define, so that "make" always
updates man/*.1 files. Reported by Bob Proulx.
|
|
* src/groups.c (main): New file, replacing groups.sh.
* src/group-list.c, src/group-list.h: New files, factored out of id.c,
implementing the functionality that "id" and "groups" have in common.
* src/id.c (print_full_info): Avoid a segfault when trying to print
an error message if getgroups fails.
(print_group_list): Move to group-list.c.
(print_group): Likewise.
* man/Makefile.am: When building groups.1, obtain the help text
from src/groups.c, not src/groups.sh.
(noinst_HEADERS): Add group-list.h.
(group): Remove rule.
(dist_man_MANS): Remove groups.1.
* doc/coreutils.texi (groups: Print group names a user is in):
Explain why "groups" and "groups $(id -un)" give different results
in existing login sessions after you change the group database.
(id: Print user identity): Likewise for "id".
* po/POTFILES.in: Add src/group-list.c and src/groups.c.
* NEWS: mention this.
* AUTHORS: Update.
|
|
* Makefile.am (EXTRA_DIST): Add .version.
(.version): New rule.
(dist-hook): Don't create $(distdir)/.version here, now that it's
being distributed.
* man/Makefile.am (common_dep): Use ../.version, not ../VERSION.
(../VERSION): Remove rule.
* GNUmakefile (dummy): Create .version, not VERSION.
Add an extra "...:= $(shell..." statement to ensure that
.version exists even when the preceding code is not run.
* .gitignore: Remove both .version and VERSION.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
* man/Makefile.am (common_dep): Don't depend on configure.ac for
version changes. Instead, depend on ../VERSION.
(../VERSION): New rule.
* Makefile.am (DISTCLEANFILES): Define.
* GNUmakefile: Update ./VERSION.
* .gitignore: List VERSION.
Reported by Sven Joachim.
|
|
* man/Makefile.am (distcheck-hook): Make check rules dependents of
this target, not of check-local, so that people aren't distracted by
failures due to programs omitted via --enable-no-install-program=...
|
|
* man/Makefile.am (mapped_name): Add ^ and $$ anchors.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
* NEWS: Mention this.
* README: Add mktemp to the list.
* AUTHORS: Add this: mktemp: Jim Meyering
* src/mktemp.c: New file.
* src/Makefile.am (bin_PROGRAMS): Add mktemp.
(mktemp_LDADD): Add $(LIB_GETHRXTIME).
* man/mktemp.x: New file.
* man/Makefile.am (dist_man_MANS): Add mktemp.1.
(mktemp.1): New dependency.
* man/.cvsignore: Add mktemp.1.
* man/.gitignore: New file.
* src/.cvsignore, src/.gitignore: Add mktemp.
* tests/misc/mktemp: New file.
* tests/misc/Makefile.am (TESTS): Add mktemp.
* tests/Coreutils.pm (run_tests): Give the POST-test function
access to stdout and stderr contents, so it can verify that
the named-on-stdout file/dir does indeed exist and has proper
permissions, etc.
[po/ChangeLog]
* POTFILES.in: Add src/mktemp.c.
|
|
|
|
* NEWS: Mention new configure-time options.
Mention that neither arch nor su is built/installed, by default.
* m4/include-exclude-prog.m4: New file.
* configure.ac: Use new macro, gl_ADD_PROG, rather than
manually appending to OPTIONAL_BIN_PROGS and MAN.
Move the code that adds "df" to the list of programs to build from
m4/jm-macros into this file.
Use gl_INCLUDE_EXCLUDE_PROG, then handle special cases: ginstall, [.
(NO_INSTALL_PROGS_DEFAULT): AC_SUBST it. Used by man/Makefile.am.
* man/Makefile.am (dist_man_MANS): Remove from this list all man pages
corresponding to "bin" programs. Add $(MAN) instead.
(optional_mans): Remove all uses.
(check-x-vs-1): Adapt to work even though arch and su are typically
no longer built (and neither are their .1 files).
* src/Makefile.am (install_su): Rename from INSTALL_SU, now that
INSTALL_SU has a different meaning. Use the new $(INSTALL_SU) value.
|
|
* NEWS: Mention arch.
* README: Add arch to the list of programs.
* AUTHORS: Add arch.
* src/uname.c: Include "uname.h".
(PROGRAM_NAME): Handle arch, too.
(ARCH_AUTHORS): Define.
(uname_long_options, arch_long_options): Renamed and new globals.
(usage): Handle arch-mode as well as uname-mode.
(decode_switches): New function, extracted from main,
to handle arch-mode as well as uname-mode.
(main): Handle both modes.
* src/uname-arch.c: New program, alias for "uname -m".
* src/uname-uname.c: New file, default uname mode.
* src/uname.h: New file, uname modes.
* src/Makefile.am (EXTRA_PROGRAMS): Add arch.
(uname_SOURCES, arch_SOURCES): Define.
* man/arch.x: New file.
* man/Makefile.am (dist_man_MANS): Add arch.1.
(arch.1): New dependency.
* tests/misc/arch: New test, compare "arch" with "uname -m"
* configure.ac (OPTIONAL_BIN_PROGS): Add arch.
(MAN): Add arch.1.
* .x-sc_require_config_h: Exempt uname-arch.c and uname-uname.c
from the always-include-<config.h> rule.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jim Meyering <jim@meyering.net>
|
|
|
|
* src/Makefile.am (bin_PROGRAMS): Add runcon.
(runcon_LDADD): Define.
* README: Add runcon to the list of programs.
* AUTHORS: Add this: runcon: Russell Coker
* tests/help-version: Add runcon as an exception.
* man/Makefile.am (dist_man_MANS): Add runcon.1.
(runcon.1): New dependency.
* po/POTFILES.in: Add src/runcon.c.
|
|
* man/Makefile.am: Build chcon.1.
|
|
* man/Makefile.am (.x.1): Add quotes around $(PERL) in case, since
it can expand to "/.../missing perl".
|
|
Suggestion from Bruno Haible.
|
|
* man/Makefile.am (.x.1): If the autoconf test has determined that
perl is missing or not a sufficient version, do nothing.
|
|
"source". I.e. "GNU coreutils 6.7".
|
|
* man/Makefile.am (dist_man_MANS): Replace all optional manpages
with `$(MAN)', computed at configure time; also, list them ...
(optional_mans): ... in this new variable.
(max_aux, EXTRA_DIST): Ensure that we distribute all manpages.
|
|
(MAINTAINERCLEANFILES): Add .kludge-stamp.
* man/Makefile.am (MAINTAINERCLEANFILES): Typo $(dist_man_MANS)
instead of $(man_MANS).
2006-10-12 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
|
(shuf.1): New dependency.
|
|
|
|
(sha224sum.1, sha256sum.1, sha384sum.1, sha512sum.1): New dependencies.
|
|
|
|
|
|
(.x.1): No need to add $(EXEEXT).
|
|
|
|
locally-added --program-name=NAME option. Now, help2man gets
the name from the [NAME] section (i.e. from our .x file).
|
|
* src/Makefile.am (all_programs.list): New rule, copied from
man/Makefile.am and tests/Makefile.am, except that we use the
system tr rather than ./tr and we don't use tr -s.
* tests/Makefile.am (all_programs): Use it.
* man/Makefile.am (all_programs): Likewise. Renamed from programs,
for consistency. All uses changed.
|
|
|
|
the change of 2004-01-22. I can no longer reproduce the problem
that prompted that change, and `info coreutils pr' would display the
`printing text' section of the manual, not the one on `pr invocation'.
|
|
|
|
so it works on systems with Perl installed somewhere other than in /usr/bin.
|
|
Use --info-page='coreutils PROG' option.
Now, readlink.1 refers the user to `info coreutils readlink'
rather than to `info readlink'. Reported by Matt Swift.
|
|
Work even if $(programs) contains '$'.
Work even if 'missing=1' in environment.
Don't report an error simply because $(programs) outputs nothing.
|
|
of `fmt -1'. Using the just-built tr is a little cleaner.
Christian Krackowizer reported that HPUX 10.20 doesn't have fmt.
|
|
(check-programs-vs-x): Fail if $(programs) is empty.
|
|
|
|
|
|
|
|
(check-x-vs-1, programs): Use it.
|
|
(usage): Use base_name (program_name) in body of --help output.
This lets me...
* man/Makefile.am (.x.1): ...back out the kludge of 2003-07-22.
|
|
|
|
help2man, to avoid having `rm.td/rm' appear in rm.1. Reported by
Thomas Luzat. See http://bugs.debian.org/202413 for details.
|
|
|