Age | Commit message (Collapse) | Author |
|
With it, we can remove the two sole tests of HAVE_TERMIOS_H.
* bootstrap.conf (gnulib_modules): Add termios.
* src/ls.c: Don't test HAVE_TERMIOS_H.
* src/stty.c: Likewise.
* m4/jm-macros.m4 (gl_CHECK_ALL_TYPES): Remove configure-time
test for termios.h.
|
|
* bootstrap.conf: Include the new module
* gl/lib/fadvise.c: Provide a simpler interface to posix_fadvise.
(fadvise): Provide hint to the whole file associated with a stream.
(fdadvise): Provide hint to the specific portion of a file
associated with a file descriptor.
* gl/lib/fadvise.h: Redefine POSIX_FADV_* to FADVISE_* enums.
* gl/modules/fadvise: New file.
* m4/jm-macros.m4: Remove the no longer needed posix_fadvise check.
* .x-sc_program_name: Exclude test-fadvise.c from this check.
* gl/tests/test-fadvise (main): New test program.
* gl/modules/fadvise-testss: A new index to reference the tests.
* src/sort.c (stream_open): Use the new interface.
* src/dd.c (iwrite): Likewise.
|
|
* m4/jm-macros.m4 (gl_CHECK_ALL_TYPES): Don't require AC_SYS_LARGEFILE,
now that gnulib does it.
|
|
* m4/jm-macros.m4 (gl_CHECK_ALL_HEADERS): Don't test for headers
that gnulib now provides: sys/ioctl.h, sys/time.h, sys/wait.h.
|
|
* m4/jm-macros.m4 (ARGMATCH_DIE): Use usage(EXIT_FAILURE), not usage(1).
* .x-sc_prohibit_magic_number_exit: Remove *.m4 exemption that was
masking the above.
|
|
Tell the system that we'll access input sequentially,
so that we more efficiently process uncached files in a few cases:
Reading from faster flash devices. E.g. 21 MB/s key:
NORMAL 31.6s (26.8 user)
SEQUENTIAL 27.7s
WILLNEED 27.7s
Processing in parallel with readahead when using a small 1M buffer:
NORMAL 24.7s (21.1 user)
SEQUENTIAL 22.7s
WILLNEED 25.6s
A small benefit when merging:
NORMAL 25.0s (16.9 user)
SEQUENTIAL 24.6s (16.6 user)
WILLNEED 38.4s (13.1 user)
Note WILLNEED is presented above for comparison to show it
has some unwanted characteristics due to its synchronous
prepopulation of the cache. It has a good benefit on a
mechanical disk @ 80MB/s and a multicore system with
competing processes:
NORMAL 14.73s
SEQUENTIAL 10.95s
WILLNEED 05.22s
However the scheduling differences causing this result
are probably best explicitly managed using `nice` etc.
* m4/jm-macros.m4 (coreutils_MACROS): check for posix_fadvise().
* src/sort.c (fadvise_input): A new function to apply
the POSIX_FADV_SEQUENTIAL hint to an input stream.
(stream_open): Call the above function for all input streams.
|
|
Enabled when coreutils is configured with --with-tty-group.
Based on a patch written by Piotr Gackiewicz. Details at
http://bugzilla.redhat.com/454261
* src/who.c (is_tty_writable): A new function returning true if a TTY
device is writable by the group. Additionally it checks the group to be
the same as TTY_GROUP_NAME when compiled with --with-tty-group.
* m4/jm-macros.m4: Introduce a new configure option --with-tty-group.
* NEWS: Mention the change.
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
* README-hacking: Suggest to use ./configure --quiet so that
any warnings are easily noticed.
* m4/gmp.m4 (cu_GMP): Warn if libgmp is not available.
* m4/jm-macros.m4 (coreutils_MACROS): Normalize the libcap warning.
* m4/xattr.m4 (gl_FUNC_XATTR): Warn if libattr is not available.
|
|
Setting the envvars, LIB_FDATASYNC, LIB_XATTR or LIB_CRYPT
could cause a configure-time and/or build-time malfunction.
Typically, a configure-time function-in-library test is performed
via code like this:
LIB_VAR=
AC_SUBST([LIB_VAR])
prefix_saved_LIBS=$LIBS
AC_SEARCH_LIBS([FUNC], [LIB_NAME],
[test "$ac_cv_search_FUNC" = "none required" ||
LIB_VAR=$ac_cv_search_FUNC])
LIBS=$prefix_saved_LIBS
However, in each of the files affected by this change, the LIB_VAR=
initialization was omitted. Thus, when set in the environment, its
value would propagate into generated Makefiles when FUNC is not found
in LIB_NAME.
* m4/jm-macros.m4 (coreutils_MACROS): Initialize AC_SUBST'd var
* m4/lib-check.m4 (cu_LIB_CHECK): Likewise.
* m4/xattr.m4 (gl_FUNC_XATTR): Likewise.
|
|
* src/copy.c (utimens_symlink): Simplify by using lutimens.
* m4/jm-macros.m4 (coreutils_MACROS): Drop utimensat; gnulib does
this for us.
* tests/cp/preserve-slink-time: Recognize lutimes support.
|
|
* bootstrap.conf (gnulib_modules): Add faccessat. Replace strdup
with strdup-posix.
* m4/jm-macros.m4 (coreutils_MACROS): Revert previous change, now
that gnulib does it for us.
* src/remove.c (write_protected_non_symlink): Use faccessat in
more situations.
|
|
where N is the depth of the deepest hierarchy rm is processing.
* src/remove.c (write_protected_non_symlink): Use faccessat to
avoid O(N)-per-entry cost of calling euidaccess.
* m4/jm-macros.m4 (coreutils_MACROS): Check for faccessat.
* NEWS (Improvements): Mention it.
|
|
* m4/jm-macros.m4 (coreutils_MACROS): The code to handle configure-time
enabling or disabling of libcap support was broken. It would treat any
libcap configure option as --disable-libcap because it doesn't check
$enableval at all. This change makes sure we do the sane thing:
--disable-libcap -> disable and don't run any tests
--enable-libcap -> run tests and fail if not found
default -> run tests and warn if not found
|
|
Transformed via this shell code:
t=$'\t'
git ls-files \
| grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \
| grep -vE 'tests/pr/|help2man' \
| xargs grep -lE "^ *$t" \
| xargs perl -MText::Tabs -ni -le \
'$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
|
|
* src/copy.c (utimensat_if_possible): New function.
(copy_internal): Remove variable, "preserve_metadata".
Replace with "dest_is_symlink". That covers all cases but one:
the one in which cp --link has created hard links to non-directories.
In that case, there is no need to update attributes of the links.
Use utimensat_if_possible, to preserve timestamps of symlinks.
* NEWS (New features): Mention this.
* tests/Makefile.am (TESTS): Add cp/preserve-slink-time.
* tests/cp/preserve-slink-time: New file.
* m4/jm-macros.m4 (coreutils_MACROS): Test for utimensat.
Reported in http://bugzilla.redhat.com/230866
|
|
* m4/jm-macros.m4: Pull in SELinux libraries while checking for
matchpathcon_init_prefix (). Emit configure warning when not found
with SELinux enabled.
* NEWS (Bug fixes): Mention it.
The bug was introduced in coreutils-7.0 via commit 0647f3eb, 2008-06-02,
"accommodate older SELinux which lacks matchpathcon_init_prefix".
|
|
* NEWS: Document the new feature.
* m4/jm-macros.m4: Check if inotify is present.
* src/tail.c (tail_forever_inotify): New function.
(main): Use the inotify-based function, if possible.
* tests/Makefile.am: Add new tests for tail.
* tests/test-lib.sh (require_proc_pid_status_, get_process_status_):
New functions.
* tests/tail-2/pid: New file.
* tests/tail-2/wait: New file.
* tests/tail-2/tail-n0f: Refactor code into the test-lib.sh
require_proc_pid_status_ function.
|
|
* m4/jm-macros.m4: Use AC_REQUIRE([gl_BIGENDIAN]) instead.
This avoids a subtle problem recently documented in autoconf:
http://git.sv.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=34e2c8d5484
|
|
* configure.ac: Add quotes.
* gl/m4/mgetgroups.m4 (gl_MGETGROUPS): Likewise.
* m4/boottime.m4 (GNULIB_BOOT_TIME): Likewise.
* m4/check-decl.m4 (gl_CHECK_DECLS): Likewise.
* m4/gmp.m4 (cu_GMP): Likewise.
* m4/jm-macros.m4 (coreutils_MACROS, gl_CHECK_ALL_HEADERS): Likewise.
(gl_CHECK_ALL_TYPES): Likewise.
* m4/lib-check.m4 (cu_LIB_CHECK): Likewise.
* m4/stat-prog.m4 (cu_PREREQ_STAT_PROG): Likewise.
FYI, I first ran this command:
git ls-files | grep -E '\.(m4|ac)$' | xargs perl -pi \
-e 's/(AC_[A-Z_]+\()([^[()]+?)([,)])/$1\[$2]$3/g;' \
-e 's/(AC_[A-Z_]+\(\[[^,]+?\], )([^,[()]+?)([,)])/$1\[$2]$3/g;' \
-e 's/(AC_[A-Z_]+\((?:\[[^,]+?\], ){2})([^,[()]+?)([,)])/$1\[$2]$3/g'
Then I updated serial numbers and copyright dates manually.
Also, I manually added two pairs of quotes in boottime.m4.
|
|
* maint.mk (sc_m4_quote_check): Renamed from m4-check.
Also search for AC_DEFINE and AC_DEFINE_UNQUOTED.
Also search in configure.ac.
* configure.ac: Quote first argument of AC_DEFINE.
* jm-macros.m4 (coreutils_MACROS): Quote the first argument to AC_DEFINE.
|
|
* m4/jm-macros.m4 (ARGMATCH_DIE_DECL): Use proper prototype for usage.
|
|
* jm-macros.m4 (coreutils_MACROS): Make LIB_CAP assignment persistent.
Signed-off-by: Eric Blake <ebb9@byu.net>
|
|
* src/ls.c: [HAVE_CAP] Include <sys/capability.h>.
(has_capability): New function for capability detection.
(print_color_indicator): Colorize file with capability.
* m4/jm-macro.m4: New configure option: --disable-libcap.
Check for libcap usability.
* src/Makefile.am (dir_LDADD, ls_LDADD, ...): Append $(LIB_CAP).
* src/dircolors.c: Update color lists.
* src/dircolors.hin: Mention new CAPABILITY color attribute.
* tests/ls/capability: Test for ls - colorize file with capability.
* tests/Makefile.am (root_tests): Add ls/capability.
* NEWS: Mention the change.
|
|
The affected code wasn't even being compiled on my system,
because HAVE_NL_LANGINFO was not defined. On other systems, where
vasnprintf.m4 determines it needs %A or %a replacement support, it
_would_ check for nl_langinfo, and expose the compilation failure.
* m4/jm-macros.m4: Check for nl_langinfo, required by sort.c.
|
|
* m4/jm-macros.m4 (gl_CHECK_ALL_TYPES): Remove obsolete check for
AC_C_LONG_DOUBLE.
* src/od.c (LONG_DOUBLE): Delete.
(width_bytes, MAX_FP_TYPE_SIZE, decode_one_format, main): Just use
'long double' directly.
(print_long_double): No longer protect by HAVE_LONG_DOUBLE.
|
|
* m4/jm-macros.m4: Check for matchpathcon_init_prefix.
* src/install.c [!HAVE_MATCHPATHCON_INIT_PREFIX]
(matchpathcon_init_prefix): Define away.
* gl/lib/se-selinux.in.h (matchpathcon_init_prefix): Define.
Reported by Ilya N. Golubev in
<http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13686>.
|
|
* bootstrap: After all is done, transform the generated gnulib-tests/gnulib.mk.
* bootstrap.conf (gnulib_tool_option_extras): Set it here.
* gnulib-tests/Makefile.am: New file.
* Makefile.am (SUBDIRS): Add gnulib-tests.
* configure.ac (AC_CONFIG_FILES): Add gnulib-tests/Makefile.
* m4/jm-macros.m4 (coreutils_MACROS) [ARGMATCH_DIE_DECL]: Omit the
"extern " prefix to "void usage ()", so that the macro string value can
be used to construct a function definition in gnulib's test-argmatch.c.
|
|
* src/Makefile.am (.sh, uninstall-local): Adjust all users of
hand-rolled GNU_PACKAGE to instead use autoconf-provided
PACKAGE_NAME.
* src/basename.c (main): Likewise.
* src/chroot.c (main): Likewise.
* src/dirname.c (main): Likewise.
* src/echo.c (main): Likewise.
* src/expr.c (main): Likewise.
* src/factor.c (main): Likewise.
* src/groups.sh (version): Likewise. Also, reflect change in
--version output due to GPLv3.
* src/hostid.c (main): Likewise.
* src/hostname.c (main): Likewise.
* src/link.c (main): Likewise.
* src/logname.c (main): Likewise.
* src/nice.c (main): Likewise.
* src/nohup.c (main): Likewise.
* src/printenv.c (main): Likewise.
* src/printf.c (main): Likewise.
* src/pwd.c (main): Likewise.
* src/setuidgid.c (main): Likewise.
* src/sleep.c (main): Likewise.
* src/system.h (case_GETOPT_VERSION_CHAR): Likewise.
* src/test.c (main): Likewise.
* src/true.c (main): Likewise.
* src/unlink.c (main): Likewise.
* src/uptime.c (main): Likewise.
* src/users.c (main): Likewise.
* src/whoami.c (main): Likewise.
* src/yes.c (main): Likewise.
* configure.ac (AC_CHECK_DECLS): No need to check strtoimax,
strtoumax, since gnulib does this.
|
|
|
|
* NEWS: Mention new configure-time options.
Mention that neither arch nor su is built/installed, by default.
* m4/include-exclude-prog.m4: New file.
* configure.ac: Use new macro, gl_ADD_PROG, rather than
manually appending to OPTIONAL_BIN_PROGS and MAN.
Move the code that adds "df" to the list of programs to build from
m4/jm-macros into this file.
Use gl_INCLUDE_EXCLUDE_PROG, then handle special cases: ginstall, [.
(NO_INSTALL_PROGS_DEFAULT): AC_SUBST it. Used by man/Makefile.am.
* man/Makefile.am (dist_man_MANS): Remove from this list all man pages
corresponding to "bin" programs. Add $(MAN) instead.
(optional_mans): Remove all uses.
(check-x-vs-1): Adapt to work even though arch and su are typically
no longer built (and neither are their .1 files).
* src/Makefile.am (install_su): Rename from INSTALL_SU, now that
INSTALL_SU has a different meaning. Use the new $(INSTALL_SU) value.
|
|
|
|
* bootstrap.conf (avoided_gnulib_modules): Avoid canonicalize-lgpl,
since we use canonicalize.
(gnulib_modules): Add fchdir.
* m4/jm-macros.m4 (coreutils_MACROS): Remove fchdir-stub.
|
|
|
|
* m4/jm-macros.m4 (coreutils_MACROS): Check for fchmod.
* src/copy.c (fchmod_or_lchmod): New function.
(copy_reg): New arg OMITTED_PERMISSIONS. All uses changed.
Omit confusing and unused ", dst_mode" arg to 'open' without O_CREAT.
When creating a file, use O_EXCL, so we're more likely to detect
funny business by other processes. At the end, if permissions
were omitted, chmod them back in.
(copy_internal): If the ownership might change, omit some permissions
at first, then restore them after chowning the file.
* src/cp.c (make_dir_parents_private): Likewise.
* src/copy.c (cached_umask): New function.
* src/copy.h (cached_umask): New decl.
|
|
* configure.ac: Reflect s/gl_MACROS/coreutils_MACROS/ renaming.
Call gl_INIT directly, rather than through the above.
[m4/ChangeLog]
* jm-macros.m4 (coreutils_MACROS): Rename from gl_MACROS, now that
most of the gnulib macros have migrated into gnulib.
Don't call gl_INIT here (now it's called from configure.ac, directly).
|
|
It is no longer needed, and was causing dependencies to appear
in lib/lib/.deps, which provoked a "make distcheck" failure.
|
|
Since any system may be affected by the Darwin readdir bug,
perform the extra rewinddir unconditionally. The performance
impact of rewinding a directory is negligible.
* src/remove.c (NEED_REWIND): Define to use
CONSECUTIVE_READDIR_UNLINK_THRESHOLD unconditionally.
[m4/ChangeLog]
* readdir.m4: Remove file once again.
* jm-macros.m4: Remove reference to gl_FUNC_READDIR.
|
|
* readdir.m4 (gl_FUNC_READDIR): Rename from GL_FUNC_READDIR.
|
|
than AC_REQUIREing, so that sys/mount.h isn't tested for after
the test result. I'm not sure why this fix is needed, but it
works.
* m4/stat-prog.m4 (cu_PREREQ_STAT_PROG): Revamp to reflect better
what stat.c actually needs.
* src/stat.c: Include <stddef.h>
(alignof): New macro.
(HAVE_STRUCT_STATXFS_F_FSID___VAL, HAVE_STRUCT_STATXFS_F_FSID_VAL):
Remove.
(STRUCT_STATXFS_F_FSID_IS_INTEGER): New macro.
(FSID_VAL): Remove.
(print_statfs): If f_fsid isn't an integer, grab its words one
at a time in little-endian order. This is a bit easier to configure
and should avoid a compilation failure on MacOS reported by Bruno
Haible.
|
|
files and we bootstrap the rest from gnulib, gettext, etc.
* README-cvs: New file.
* bootstrap: New file.
* bootstrap.conf: New file.
* .x-sc_trailing_blank: Remove config-log, .gdb-history. Add .po.
* configure.ac (AC_PREREQ): Move here from m4/*.m4, for benefit
of gnulib-tool.
(gl_DEFAULT_POSIX2_VERSION, gl_USE_SYSTEM_EXTENSIONS, gl_PERL):
(gl_IGNORE_UNUSED_LIBRARIES): Remove; now done by gnulib.
(gl_EARLY): Add.
(gl_MACROS): Call just after gl_EARLY, just for clarity.
* src/c99-to-c98.diff: Remove patch to ls.c; no longer needed.
* src/kill.c (strtoimax): Remove decl.
* src/ls.c: Include "wcwidth.h" instead of rolling it ourselves.
* src/wc.c: Likewise.
* src/ls.c (sort_files): Rewrite to avoid need for C99-style
declaration, so that we don't need to patch this file.
* src/printf.c (strtoimax, strtoumax): Remove decls.
* src/su.c: Include getpass.h.
(getpass): remove.
* src/system.h: Include mempcpy.h, stpcpy.h, strpbrk.h.
Include inttypes.h unconditionally; remove decls it handles.
* lib/Makefile.am: include gnulib.mk, so that we can remove most of
this file.
(AM_CPPFLAGS): Don't mention -I$(srcdir), since that's now done
for us.
(noinst_LIBRARIES, LDDADD, DEFS): Remove.
(libcoreutils_a_SOURCES): Trim down greatly, just to the files
that aren't in gnulib.
Remove defns gnulib does for us.
* m4/check-decl.m4 (gl_CHECK_DECLS):
Don't include stdio.h, string.h, stdlib.h, unistd.h, sys/time.h,
time.h. Use AC_CHECK_DECLS_ONCE for free, getenv, geteuid, getlogin,
getuid, lseek, malloc, memchr, realloc. Don't check for getutent,
memrchr, nanosleep, stpcpy, strndup, strnlen, strstr, strtoul,
strtoull.
(_gl_DECL_HEADERS): Remove; all uses removed.
* m4/jm-macros.m4 (gl_MACROS): Move AC_PREREQ into configure.ac
for the benefit of gnulib-tool. Call gl_INIT.
Do not call or require macros that gnulib will handle for us.
Don't check for fchmod, hasmntopt, isascii, lchown, listmntent,
mempcpy, realpath, wcrtomb, tzset.
(gl_CHECK_ALL_HEADERS): Don't check for sys/statvfs.h, sys/vfs.h,
sys/mount.h.
(gl_CHECK_ALL_TYPES): Require AC_TYPE_UNSIGNED_LONG_LONG_INT.
Don't check for struct stat.st_blksize.
Don't require AC_STRUCT_ST_DM_MODE, gt_TYPE_SSIZE_T,
gl_AC_TYPE_UINT32_T, gl_AC_TYPE_UINTMAX_T, gl_AC_TYPE_UINTPTR_T,
gl_AC_TYPE_UNSIGNED_LONG_LONG.
* m4/prereq.m4 (gl_PREREQ): Require gl_FUNC_XFTS, gl_ROOT_DEV_INO.
Don't require macros that gnulib does for us.
* m4/stat-prog.m4 (cu_PREREQ_STAT_PROG): Don't check for
sys/sysmacros.h. Don't check for statvfs. Use AC_CHECK_HEADERS_ONCE
for netinet/in.h, nfs/nfs_clnt.h, nfs/vfs.h.
Don't require gl_AC_TYPE_LONG_LONG, gt_HEADER_INTTYPES_H.
|
|
|
|
|
|
|
|
of AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK.
|
|
are not in Interix.
|
|
Don't require gl_CHDIR_SAFER.
|
|
|
|
|
|
|