| Age | Commit message (Collapse) | Author |
|---|
|
Supporting `split --numeric-suffixes=1 -n100` for example.
* doc/coreutils.texi (split invocation): Mention the two
use cases for the FROM parameter, and the consequences on
the suffix length determination.
* src/split.c (set_suffix_length): Use the --numeric-suffixes
FROM parameter in the suffix width calculation, when it's
less than the number of files specified in --number.
* tests/split/suffix-auto-length.sh: Add test cases.
Fixes http://bugs.gnu.org/20511
|
|
* src/wc.c (usage): State that it calculates display width.
* doc/coreutils.texi (wc invocation): Detail the distinct
items used to determine the display width.
|
|
* doc/coreutils.texi (truncate invocation): The word 'their' is
incorrect; 'each file' is the antecedent, and is singular,
so 'its' is the correct pronoun.
|
|
* doc/coreutils.texi (cp invocation): Mention that when copying files
without preserving permissions, the umask or a default ACL affect
the mode of new files.
* THANKS.in: Remove committer.
Related to http://bugs.gnu.org/8527
|
|
* doc/coreutils.texi: `mkfifo' and `mknod' use the optContext macro
which adds a description for the SELinux security context in addition to
the single option already described in each case. The result in both
cases is two options being introduced as `option' (singular). Fix this
by introducing them as `options' (plural).
|
|
* doc/coreutils.texi: Move numfmt info to this section,
as numfmt functionality aligns more with seq and factor,
than fmt and pr etc.
|
|
Problem reported by Isaac Schwabacher in:
http://bugs.gnu.org/20214
* doc/coreutils.texi (nohup invocation): Clarify that when nohup's
stdin gets redirected, it's unreadable.
* doc/coreutils.texi (nohup invocation):
* src/nohup.c (usage): Don't promise /dev/null.
|
|
Adjust commit v8.23-140-gfdd6ebf to add the --output-error option
instead of --write-error, and treat open() errors like write() errors.
* doc/coreutils.texi (tee invocation): s/write-error/output-error/.
* src/tee.c (main): Exit on open() error if appropriate.
* tests/misc/tee.sh: Add a case to test open() errors.
* NEWS: Adjust for the more general output error behavior.
Suggested by Bernhard Voelker.
|
|
tee is very often used with pipes and this gives better control
when writing to them. There are 3 classes of file descriptors
that tee can write to: files(1), pipes(2), and early close pipes(3).
Handling write errors to 1 & 2 is supported at present with the caveat
that failure writing to any pipe will terminate tee immediately.
Handling write errors to type 3 is not currently supported.
To improve the supported combinations we add these options:
--write-error=warn
Warn if error writing any output including pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any output had error.
--write-error=warn-nopipe, -p
Warn if error writing any output except pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any non pipe output had error.
--write-error=exit
Exit if error writing any output including pipes.
--write-error=exit-nopipe
Exit if error writing any output except pipes.
Use the "nopipe" variants when files are of types 1 and 3, otherwise
use the standard variants with types 1 and 2. A caveat with the above
scheme is that a combination of pipe types (2 & 3) is not supported
robustly. I.e. if you use the "nopipe" variants when using both type
2 and 3 pipes, then any "real" errors on type 2 pipes will not be
diagnosed.
Note also a general issue with type 3 pipes that are not on tee's
stdout, is that shell constructs don't allow to distinguish early
close from real failures. For example `tee >(head -n1) | grep -m1 ..`
can't distinguish between an error or an early close in "head" pipe,
while the fail on the grep part of the pipe is distinguished
independently from the resulting pipe errors. This is a general
issue with the >() construct, rather than with tee itself.
* NEWS: Mention the new feature.
* doc/coreutils.texi (tee invocation): Describe the new option.
* src/tee.c (usage): Likewise.
(main): With --write-error ignore SIGPIPE, and handle
the various exit, diagnostics combinations.
* tests/misc/tee.sh: Tess all the new options.
Fixes http://bugs.gnu.org/11540
|
|
Since v5.2.1-1247-g8dafbe5, tee(1) treated '-' as stdout while POSIX
explicitly requires to treat this as a file name. Revert this change,
as the interleaved output - due to sending another copy of input to
stdout - is not considered to be useful. Discussed in
http://lists.gnu.org/archive/html/coreutils/2015-02/msg00085.html
* src/tee.c (tee_files): Remove the special handling for "-" operands.
(usage): Remove the corresponding sentence.
* doc/coreutils.texi (common options): Remove the "tee -" example.
(tee invocation): Document that tee(1) now treats "-" as a file name.
* tests/misc/tee.sh: Add a test case for "tee -".
While at it, re-indent the above multi-argument processing case and
extend that to 13 operands, as POSIX mandates that, too.
* tests/misc/tee-dash.sh: Remove now-obsolete test.
* tests/local.mk (all_tests): Remove the above test.
* NEWS (Changes in behavior): Mention the change.
|
|
This includes a change to require --with-libmount
to be used with configure, due to the many libmount dependencies.
* bootstrap: Sync with gnulib to exit early on gnulib-tool error.
* gl/lib/tempname.c.diff: Adjust for gnulib changes.
* gl/lib/tempname.h.diff: Likewise.
* gl/modules/tempname: Likewise.
* doc/.gitignore: Add new gendocs_template_min gnulib script.
|
|
* doc/coreutils.texi (Random sources): Give an example using openssl,
generating a reproducible arbitrary amount of randomly distributed
data, given a seed value.
|
|
To align with all other places (and correct grammar), change all
upper-case "I.E." to "I.e.". Furthermore, ensure that "i.e." is
followed by a comma. Finally, ensure to use a double-space before
"I.e.," at the beginning of a sentence.
The following was used to change all offending uses (apart from
old ChangeLog files):
$ git grep -liF 'i.e.' \
| xargs sed -i \
-e 's/I\.E\./I.e./g' \
-e 's/\. \(I\.e\.\)/. \1/g' \
-e 's/\([Ii]\.e\.\)\( \)/\1,\2/g' \
-e 's/\([Ii]\.e\.\)$/\1,/g'
* cfg.mk (sc_prohibit_uppercase_id_est): Add new rule.
(sc_ensure_double_space_after_dot_before_id_est): Likewise.
(sc_ensure_comma_after_id_est): Likewise.
(old_NEWS_hash): Refresh hash via "make update-NEWS-hash".
* NEWS: Change use of "id est" abbreviation via the above command.
* README: Likewise.
* README-prereq: Likewise.
* doc/coreutils.texi: Likewise.
* gl/lib/rand-isaac.c: Likewise.
* gl/lib/tempname.c.diff: Likewise.
* man/stdbuf.x: Likewise.
* src/cat.c: Likewise.
* src/copy.c: Likewise.
* src/copy.h: Likewise.
* src/cp.c: Likewise.
* src/cut.c: Likewise.
* src/dd.c: Likewise.
* src/df.c: Likewise.
* src/fiemap.h: Likewise.
* src/longlong.h: Likewise.
* src/ls.c: Likewise.
* src/numfmt.c: Likewise.
* src/pr.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/split.c: Likewise.
* tests/Coreutils.pm: Likewise.
* tests/df/df-symlink.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/init.sh: Likewise.
* tests/ls/color-norm.sh: Likewise.
* tests/misc/basename.pl: Likewise.
* tests/misc/ls-misc.pl: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/shred-exact.sh: Likewise.
* tests/misc/sort.pl: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
|
|
* src/md5sum.c (usage): Detail the reasons for the default
double space between checksum and file name.
* doc/coreutils.texi (md5sum invocation): Likewise.
Explicitly mention the 3 formats that --check supports.
Fixes http://bugs.gnu.org/19725
|
|
* m4/jm-macros.m4 (coreutils_MACROS): Check for syncfs().
* man/sync.x: Add references to syncfs, fsync and fdatasync.
* doc/coreutils.texi (sync invocation): Document the new feature.
* src/sync.c: Include "quote.h".
(AUTHORS): Include myself.
(MODE_FILE, MODE_DATA, MODE_FILE_SYSTEM, MODE_SYNC): New enum values.
(long_options): Define.
(sync_arg): New function.
(usage): Describe that arguments are now accepted.
(main): Add arguments parsing and add support for fsync(2),
fdatasync(2) and syncfs(2).
* tests/misc/sync.sh: New (and only) test for sync.
* tests/local.mk: Reference the new test.
* AUTHORS: Add myself to sync's authors.
* NEWS: Mention the new feature.
|
|
* src/stty.c (usage): Don't reference unsupported options,
in the combined options descriptions.
* doc/coreutils.texi (stty invocation): Adjust for the
new order of the 'sane' and 'raw' combined options.
Also add -iutf8 to the 'sane' list.
|
|
* src/stty.c (usage): On systems that support this setting (BSD),
display 'status' in the list of adjustable special characters.
* doc/coreutils.texi (stty invocation): Mention the option, and that
it's not currently supported on Linux.
|
|
The equivalent of this is 'flush', but that was never documented
as an option (though was output with stty -a). Therefore use
the more descriptive name, also generally used on BSD systems.
Note even though this setting seems ineffective on Linux, supporting
the setting is useful to allow terminal programs to receive
the default ^O character code.
* doc/coreutils.texi (stty invocation): Document the 'discard' option.
* src/stty.c (struct control_info): Add 'discard'; same as 'flush'.
(display_all): Show 'discard' rather than 'flush' char.
(display_changed): Likewise.
(usage): Document the 'discard' option.
|
|
Add support for the "extproc" option which is well described at:
http://lists.gnu.org/archive/html/bug-readline/2011-01/msg00004.html
* src/stty.c (usage): Describe the extproc option if either the
Linux EXTPROC local option is defined, or the equivalent
BSD TIOCEXT ioctl is defined.
(main): Make the separate ioctl call for extproc on BSD.
* doc/coreutils.texi (stty invocation): Describe the option,
and reference the related RFC 1116.
* NEWS: Mention the new feature.
|
|
* src/split.c (eolchar): A new variable to hold
the separator character (unibyte for now).
This is reference throughout rather than hardcoding '\n'.
(usage): Describe the new --separator option, and
mention records along with lines so there is no ambiguity
that all options treat lines and records equivalently.
(main): Have -t update eolchar, or default to '\n'.
* tests/split/record-sep.sh: New test case.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (split invocation): Document the new option.
Adjust --lines, --line-bytes, --number=[lr]/... to mention
they pertain to records if --separator is specified.
* NEWS: Mention the new feature.
|
|
Following on from http://bugs.gnu.org/17546
make it more obvious that du may elide specified operands
to avoid double counting in the set.
* src/du.c (usage): Specify that du operates on the set of
operands, rather than each independently.
* doc/coreutils.texi (du invocation): Likewise. Also state
that the number of entries printed may change due to the
order specified. Currently, deeper items specified earlier
will result in them being displayed, but don't mention that
implementation detail in the documentation.
* THANKS.in: Add reporter.
Reported by Stephen Shirley
|
|
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
|
|
Identified at https://www.gnu.org/software/gnun/linc/linc.html
* doc/coreutils.texi (Block size): Fix the stale link.
|
|
* src/df.c (filter_mount_list): Separate remote locations are
generally explicitly mounted, so list each even if they share
the same remote device and thus storage. However with --total
keep the suppression to give a more accurate value for the
total storage available.
(usage): Expand on the new implications of --total and move
it in the options list according to alphabetic order.
doc/coreutils.texi (df invocation): Mention that --total impacts
on deduplication of remote file systems and also move location
according to alphabetic order.
* tests/df/skip-duplicates.sh: Add remote test cases.
* NEWS: Mention the change in behavior.
Reported in http://bugs.debian.org/737399
Reported in http://bugzilla.redhat.com/920806
Reported in http://bugzilla.opensuse.org/866010
Reported in http://bugzilla.opensuse.org/901905
|
|
* src/ls.c (usage): Mention the -b and -q options
in the -1 description.
* doc/coreutils.texi (ls invocation): Likewise.
|
|
* src/df.c (usage): Mention that duplicate file systems are shown
with this option, not just dummy file systems.
* doc/coreutils.texi (df invocation): For the --all option, expand
on the class of normally suppressed mount entries that it includes.
Reported in http://bugs.debian.org/737399
|
|
* doc/coreutils.texi (stat invocation): Add a paragraph documenting
stat's output format when the --terse option is specified, both in
normal and in --file-system mode.
Reported by Dan Jacobson <jidanni@jidanni.org>
in http://bugs.gnu.org/18624
|
|
* src/dd.c: Report the transfer progress every second when the
new status=progress level is used. Adjust the handling and
description of the status= option so that they're treated as
mutually exclusive levels, rather than flags with implicit precedence.
* doc/coreutils.texi (dd invocation): Document the new progress
status level. Reference the new level in the description of SIGUSR1.
* tests/dd/stats.sh: Add new test for status=progress.
* tests/dd/misc.sh: Change so status=none only takes precedence
if it's the last level specified.
* NEWS: Mention the feature.
|
|
* src/dd.c (ifd_reopen): A new wrapper to ensure we
don't exit upon receiving a SIGUSR1 in a blocking open()
on a fifo for example.
(iftruncate): Likewise for ftruncate().
(iread): Process signals also after a short read.
(install_signal_handlers): Install SIGINFO/SIGUSR1 handler
even if set to SIG_IGN, as this is what the parent can easily
set from a shell script that can send SIGUSR1 without the
possiblity of inadvertently killing the dd process.
* doc/coreutils.texi (dd invocation): Improve the example to
show robust usage wrt signal races and short reads.
* tests/dd/stats.sh: A new test for various signal races.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
|
|
* src/system.h (emit_ancillary_info): For commands that don't have
a 1:1 mapping with the texinfo node names, provide a mapping to
the correct node.
* doc/coreutils.texi: Add some extra cross references noticed while
checking this.
Fixes http://bugs.debian.org/762092
|
|
This supports longstanding shell commands like
'info coreutils "touch invocation"'.
Problem reported by Vincent Lefevre via Bob Proulx in:
http://bugs.gnu.org/18428
* doc/coreutils.texi (Multi-call invocation):
Rename from "coreutils invocation".
|
|
* doc/coreutils.texi (coreutils invocation, df invocation)
(stty invocation, whoami invocation, nproc invocation)
(arch invocation, hostname invocation, hostid invocation)
(uptime invocation, chroot invocation, nice invocation)
(stdbuf invocation): Document that the command is installed
optionally.
|
|
* doc/coreutils.texi: Fix normal typos:
s/pseudorandom/pseudo-random/;
s/behaviour/behavior/;
s/linux-based/Linux-based/;
s/nonnegative/non-negative/.
Fix IEC's long name: s/Electronical/Electrotechnical/.
Wrap 'getopt' into the @code{} macro.
Fix a grammatical error (from myself): s/splitted/split/.
|
|
* doc/coreutils.texi (timeout invocation): Fix misspelling.
Reported by Yureruchihirosan via OKANO Takayoshi in:
http://bugs.gnu.org/18394
|
|
* doc/coreutils.texi (df invocation): Add a sentence that eliding
duplicate entries for the same file system is not limited to bind
mounts, but also happens for remote file systems like NFS.
|
|
Since commit v8.22-94-g99960ee, chroot(1) skips the chroot(2) syscall
for "/" arguments (and synonyms). The problem is that it also skips
the following chdir("/") call in that case. The latter breaks existing
scripts which expect "/" to be the working directory inside the chroot.
While the first part of the change - i.e., skipping chroot("/") - is
okay for consistency with systems where it might succeed for a non-root
user, the second part might be malicious, e.g.
cd /home/user && chroot '/' bin/foo
In the "best" case, chroot(1) could not execute 'bin/foo' with ENOENT,
but in the worst case, chroot(1) would execute '/home/user/bin/foo' in
the case that exists - instead of '/bin/foo'.
Revert that second part of the patch, i.e., perform the chdir("/)
in the common case again - unless the new --skip-chdir option is
specified. Restrict this new option to the case of "/" arguments.
* src/chroot.c (SKIP_CHDIR): Add enum.
(long_opts): Add entry for the new --skip-chdir option.
(usage): Add --skip-chdir option, and while at it, move the other
to options into alphabetical order.
(main): Accept the above new option, allowing it only in the case
when NEWROOT is the old "/".
Move down the chdir() call after the if-clause to ensure it is
run in any case - unless --skip-chdir is specified.
Add a 'newroot' variable for the new root directory as it is used
in a couple of places now.
* tests/misc/chroot-fail.sh: Invert the last tests which check the
working directory of the execvp()ed program when a "/"-like
argument was passed: now expect it to be "/" - unless --skip-chdir
is given.
* doc/coreutils.texi (chroot invocation): Document the new option.
Document that chroot(1) usually calls chdir("/") unless the new
--skip-chdir option is specified. Sort options.
* NEWS (Changes in behavior): Mention the fix.
(New features): Mention the new option.
* init.cfg (nonroot_has_perm_): Add chroot's new --skip-chdir option.
* tests/cp/preserve-gid.sh (t1): Likewise.
* tests/cp/special-bits.sh: Likewise.
* tests/id/setgid.sh: Likewise.
* tests/misc/truncate-owned-by-other.sh: Likewise.
* tests/mv/sticky-to-xpart.sh: Likewise.
* tests/rm/fail-2eperm.sh: Likewise.
* tests/rm/no-give-up.sh: Likewise.
* tests/touch/now-owned-by-other.sh: Likewise.
Reported by Andreas Schwab in http://bugs.gnu.org/18062
|
|
* doc/coreutils.texi (Floating point): Document handling of "inf",
"infinity", "NaN", and so on.
|
|
Add the --enable-single-binary option to the configure file.
When enabled, this option builds a single binary file containing
the selected tools. Which tool gets executed depends on the value
of argv[0] which can be set implicitly through symlinks to the
single program.
This setup reduces significantly the size of a complete coreutils
install, since code from lib/libcoreutils.a is not duplicated in
every one of the more than 100 binaries. Runtime overhead is
increased due to more dynamic libraries being loaded, and extra
initialization being performed for all utils. Also initially
a larger binary is loaded from storage, though this is usually
alleviated due to caching and lazy mmaping of unused blocks,
and in fact the single binary should have better caching
characteristics.
Comparing the size of the individual versus single binary on x86_64:
$ cd src
$ size coreutils
$ size -t $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
text data bss dec hex filename
1097416 5388 88432 1191236 122d44 src/coreutils
4901010 124964 163768 5189742 4f306e (TOTALS)
Storage requirements are reduced similarly:
$ cd src
$ du -h coreutils
$ du -ch $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
1.2M coreutils
5.3M total
When installing, the makefile will create either symlinks or
shebangs based on the --enable-single-binary setting, for
each configured tool. In this way, all the tools are still
callable individually, but they are all implemented by the same
"coreutils" binary installed on the same directory.
* .gitignore: Add new generated files.
* Makefile.am: New rules to generate build-aux/gen-single-binary.sh
and install symlinks.
* NEWS: Mention the new feature.
* README: Add "coreutils" to the list of utils.
* bootstrap.conf: Regenerate src/single-binary.mk
* build-aux/gen-lists-of-programs.sh: New --list-progs option.
* build-aux/gen-single-binary.sh: Regenerate
* configure.ac: New --enable-single-binary option and other variables.
Disallow --enable-single-binary=symlinks with --program-prefix et. al.
* man/coreutils.x: Manpage hook.
* man/local.mk: Add manpage hook and fix dependencies.
* src/coreutils.c: Multicall implementation.
* src/local.mk: New rules for the single binary option.
* tests/local.mk: Add $single_binary_progs to support
require_built_() from init.cfg
* tests/misc/env.sh: Avoid the use of symlink to echo.
* tests/misc/help-version.sh: Add exception for coreutils.
* tests/install/basic-1.sh: Really avoid using ginstall strip
functionality if there is an issue with the independent strip command.
* src/kill.c: Changes to call exit() in main.
* src/readlink.c: Likewise.
* src/shuf.c: Likewise.
* src/timeout.c: Likewise.
* src/truncate.c: Likewise.
|
|
Revert commit v8.22-131-g3e89d5b as even though POSIX
states that the default mode should be -L,
common practice for stand-alone pwd implementations
is to default to -P.
* src/pwd.c (usage): Retain mention of the default mode of operation.
Suggested by Bob Proulx
|
|
* src/pwd.c (main): Adjust default mode to be "logical"
and independent of the POSIXLY_CORRECT env var.
(usage): Mention the default mode of operation.
* doc/coreutils.texi (pwd invocation): Adjust accordingly.
* tests/misc/pwd-option.sh: Likewise.
* NEWS: Mention the change in behavior.
|
|
* doc/coreutils.texi (chown invocation): Mention the system dependent
restrictions on setting groups.
(chgrp invocation): Likewise. Reference the 'chown' superset.
* man/chgrp.x: Cross reference chown(1) which is the superset interface,
and also chown(2) which gives details of the platform restrictions.
Fixes http://bugs.gnu.org/17495
|
|
* src/install.c (install_file_in_file_parents): Factor out the
creation of any parent directories into ...
(mkancesdirs_safe_wd): ... this new function.
(install_file_in_dir): Add the parameter 'mkdir_and_install', and
call the above new function if it evaluates to true.
(main): During parsing of the -t option, move the check whether
the target_directory exists down after the option parsing loop,
and do not complain about stat(optarg,...) failing if -D was given.
Pass 'mkdir_and_install' to install_file_in_dir().
* doc/coreutils.texi (install invocation): Remove the (false)
restriction that -D would be ignored together with -t. Instead,
clarify install's new bahavior.
Fix the node's reference in the top-level @direntry for consistency.
* src/install/basic-1.sh: Add tests for the now-allowed combination
of the -D and -t options.
* NEWS: Mention the improvement.
|
|
* src/join.c (usage): Reword to avoid implication that
the NUL byte is only generated as the output delimeter.
* src/sort.c (usage): Likewise.
* src/shuf.c (usage): Likewise. Also since we're changing the
translation string take the opportunity to separate out
the description to a separate string to reduce translation overhead.
* src/uniq.c (usage): Likewise.
* src/stty.c (usage): s/null/NUL/ for consistency.
* src/basename.c (usage): Reword for accuracy/consistency.
* src/dirname.c (usage): Likewise.
* src/du.c (usage): Likewise.
* src/env.c (usage): Likewise.
* src/printenv.c (usage): Likewise.
* src/readlink.c (usage): Likewise.
* src/realpath.c (usage): Likewise.
* doc/coreutils.texi: Consolidate/share the descriptions of
--null, --zero and --zero-terminated.
|
|
* doc/coreutils.texi: Add "@documentencoding UTF-8".
|
|
It's dangerous and confusing to leave root's supplemental
groups in place when specifying other users with --userspec.
In the edge case that that is desired one can explicitly
specify --groups.
Also we implicitly set the system defined supplemental groups
for a user. The existing mechanism where supplemental groups
needed to be explicitly specified is confusing and not general
when the lookup needs to be done within the chroot.
Also we extend the --groups syntax slightly to allow clearing
the set of supplementary groups using --groups=''.
* src/chroot.c (setgroups): On systems without supplemental groups,
clearing then is a noop and so should return success.
(main): Lookup the primary GID with getpwuid() when just a numeric
uid is specified, and also infer the USERNAME from this call,
needed when we're later looking up the supplemental groups for a user.
Support clearing supplemental groups, either implicitly for
unknown users, or explicitly when --groups='' is specified.
* tests/misc/chroot-credentials.sh: Various new test cases
* doc/coreutils.texi (chroot invocation): Adjust for the new behavior.
* NEWS: Mention the change in behavior.
|
|
Problem reported by Don Baggett in <http:/bugs.gnu.org/17422>.
* NEWS:
* doc/coreutils.texi (dd invocation): Document this.
* src/dd.c (conversions): conv=ascii implies conv=unblock.
conv=ebcdic and conv=ibm imply conv=block.
(ascii_to_ebcdic, ebcdic_to_ascii): Correct to match
POSIX 1003.1-2013.
* tests/dd/ascii.sh: New file.
* tests/local.mk (all_tests): Add it.
|
|
* src/numfmt.c (setup_padding_buffer): Simplify the code by not
explicitly dealing with heap exhaustion.
(parse_format_string): Likewise. Handle multiple grouping
modifiers as does the standard printf. Handle the new leading
zero --format modifier.
(double_to_human): Use more defensive coding against overwriting
stack buffers. Honor the leading zeros width.
(usage): Mention the leading zero --format modifier.
(main): Allow --padding in combo with a --format (width),
as the number of leading zeros are useful independent of
the main field width.
* doc/coreutils.texi (numfmt invocation): Likewise.
* tests/misc/numfmt.pl: Add new test cases.
* NEWS: Mention the improvement.
|
|
* doc/coreutils.texi (pr invocation): Clarify that -w or -W
will be rounded down so that each column has the same width.
Adjust the wording for -W, to avoid the implication that the
width of -S is insignificant to the page width.
* src/pr.c (usage): Add a period to avoid ambiguity in
the man page output.
|
|
* src/stat.c (usage): s/modification time/data modification time/;
s/change time/status change time/
* doc/coreutils.texi: Ditto.
|
|
* doc/coreutils.texi (shred invocation): Mention some reasons
why clearing slack space might be useful.
* src/shred.c (do_wipefd): Add initial writes for each pass
for small regular files in case the storage for those is
in the inode, and thus a larger write up to a block size would
bypass that. Move the direct I/O control to...
(dopass): ... here so we can avoid enabling it for these small
initial writes. It's better to retry direct I/O for each pass
anyway to handle the case where direct I/O is disabled for only
the last portion of a file when the size is not a multiple of
the block size. Note we don't avoid the sync for the initial
write as it will be small but more importantly could be on a
different part of the disk and so worth doing independently
to ensure the write is not discarded.
* tests/misc/shred-exact.sh: Check some more direct I/O cases.
* NEWS: Mention the improvements.
The inode storage issue was mentioned by Paul Eggert.
|
