| Age | Commit message (Collapse) | Author |
|---|
|
A lot of this is converting http: to https:.
Also, gmane went away, so remove URLs that no longer work and
are not easy to figure out what they were.
Some of this stuff is so old that it no longer matters anyway.
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
|
|
Note we don't support the --algorithm option of the
b2sum command in the external BLAKE2 project, as that
was deemed too confusing for users.
"BLAKE2b" was chosen as the default algorithm to use,
which is single threaded but performs well on 64 bit.
* src/blake2: CC0 source copied from external project.
* cfg.mk[VC_LIST_ALWAYS_EXCLUDE_REGEX]: Exclude blake2/
from syntax checks, make update-copyright, etc.
* src/local.mk: Reference the sources for b2sum,
and set the compilation flags.
* doc/coreutils.texi (b2sum invocation): Reference the
md5sum invocation node, and add descriptions of -l.
* tests/misc/b2sum.sh: Add new test.
* tests/local.mk: Reference new test.
* AUTHORS: Add new binary.
* README: Likewise.
* build-aux/gen-lists-of-programs.sh: Likewise.
* man/.gitignore: Likewise.
* scripts/git-hooks/commit-msg: Likewise.
* man/b2sum.x: New man page template.
* man/local.mk: Reference new template.
* src/.gitignore: Ignore new binaries.
* src/blake2/.gitignore: Ignore new build atrifacts.
* src/md5sum.c (usage): Describe the new -l option.
* NEWS: Mention the new program.
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
* README, doc/coreutils.texi (Introduction, sort invocation):
Suggest 'sort --debug' more prominently.
|
|
* src/c99-to-c89.diff: Remove file.
* src/local.mk (EXTRA_DIST): Remove it from this list.
* README (Pre-C99 build failure): Update section.
|
|
Suggested in https://bugzilla.redhat.com/1250113
* AUTHORS: Add base32.
* THANKS.in: Add suggester.
* README: Reference the new program.
* NEWS: Mention the new program.
* src/.gitignore: Ignore the new binary.
* bootstrap.conf: Reference the gnulib base32 module.
* build-aux/gen-lists-of-programs.sh: Add base32.
* man/base32.x: A new template.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* doc/coreutils.texi (base32 invocation): Document the new command.
* src/local.mk: Adjust to build base32 based on base64.c.
* src/base64.c: Parameterize to use the correct headers,
functions and buffer sizes, depending on which binary
is being built.
* tests/misc/base64.pl: Adjust to test both base32 and base64.
* tests/misc/tty-eof.pl: Add base32 as a program that
accepts input on stdin without any options specified.
* scripts/git-hooks/commit-msg: Add base32 to the template.
|
|
To align with all other places (and correct grammar), change all
upper-case "I.E." to "I.e.". Furthermore, ensure that "i.e." is
followed by a comma. Finally, ensure to use a double-space before
"I.e.," at the beginning of a sentence.
The following was used to change all offending uses (apart from
old ChangeLog files):
$ git grep -liF 'i.e.' \
| xargs sed -i \
-e 's/I\.E\./I.e./g' \
-e 's/\. \(I\.e\.\)/. \1/g' \
-e 's/\([Ii]\.e\.\)\( \)/\1,\2/g' \
-e 's/\([Ii]\.e\.\)$/\1,/g'
* cfg.mk (sc_prohibit_uppercase_id_est): Add new rule.
(sc_ensure_double_space_after_dot_before_id_est): Likewise.
(sc_ensure_comma_after_id_est): Likewise.
(old_NEWS_hash): Refresh hash via "make update-NEWS-hash".
* NEWS: Change use of "id est" abbreviation via the above command.
* README: Likewise.
* README-prereq: Likewise.
* doc/coreutils.texi: Likewise.
* gl/lib/rand-isaac.c: Likewise.
* gl/lib/tempname.c.diff: Likewise.
* man/stdbuf.x: Likewise.
* src/cat.c: Likewise.
* src/copy.c: Likewise.
* src/copy.h: Likewise.
* src/cp.c: Likewise.
* src/cut.c: Likewise.
* src/dd.c: Likewise.
* src/df.c: Likewise.
* src/fiemap.h: Likewise.
* src/longlong.h: Likewise.
* src/ls.c: Likewise.
* src/numfmt.c: Likewise.
* src/pr.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/split.c: Likewise.
* tests/Coreutils.pm: Likewise.
* tests/df/df-symlink.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/init.sh: Likewise.
* tests/ls/color-norm.sh: Likewise.
* tests/misc/basename.pl: Likewise.
* tests/misc/ls-misc.pl: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/shred-exact.sh: Likewise.
* tests/misc/sort.pl: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
|
|
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
|
|
Add the --enable-single-binary option to the configure file.
When enabled, this option builds a single binary file containing
the selected tools. Which tool gets executed depends on the value
of argv[0] which can be set implicitly through symlinks to the
single program.
This setup reduces significantly the size of a complete coreutils
install, since code from lib/libcoreutils.a is not duplicated in
every one of the more than 100 binaries. Runtime overhead is
increased due to more dynamic libraries being loaded, and extra
initialization being performed for all utils. Also initially
a larger binary is loaded from storage, though this is usually
alleviated due to caching and lazy mmaping of unused blocks,
and in fact the single binary should have better caching
characteristics.
Comparing the size of the individual versus single binary on x86_64:
$ cd src
$ size coreutils
$ size -t $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
text data bss dec hex filename
1097416 5388 88432 1191236 122d44 src/coreutils
4901010 124964 163768 5189742 4f306e (TOTALS)
Storage requirements are reduced similarly:
$ cd src
$ du -h coreutils
$ du -ch $(../build-aux/gen-lists-of-programs.sh --list-progs |
grep -Ev '(coreutils|libstdbuf)') | tail -n1
1.2M coreutils
5.3M total
When installing, the makefile will create either symlinks or
shebangs based on the --enable-single-binary setting, for
each configured tool. In this way, all the tools are still
callable individually, but they are all implemented by the same
"coreutils" binary installed on the same directory.
* .gitignore: Add new generated files.
* Makefile.am: New rules to generate build-aux/gen-single-binary.sh
and install symlinks.
* NEWS: Mention the new feature.
* README: Add "coreutils" to the list of utils.
* bootstrap.conf: Regenerate src/single-binary.mk
* build-aux/gen-lists-of-programs.sh: New --list-progs option.
* build-aux/gen-single-binary.sh: Regenerate
* configure.ac: New --enable-single-binary option and other variables.
Disallow --enable-single-binary=symlinks with --program-prefix et. al.
* man/coreutils.x: Manpage hook.
* man/local.mk: Add manpage hook and fix dependencies.
* src/coreutils.c: Multicall implementation.
* src/local.mk: New rules for the single binary option.
* tests/local.mk: Add $single_binary_progs to support
require_built_() from init.cfg
* tests/misc/env.sh: Avoid the use of symlink to echo.
* tests/misc/help-version.sh: Add exception for coreutils.
* tests/install/basic-1.sh: Really avoid using ginstall strip
functionality if there is an issue with the independent strip command.
* src/kill.c: Changes to call exit() in main.
* src/readlink.c: Likewise.
* src/shuf.c: Likewise.
* src/timeout.c: Likewise.
* src/truncate.c: Likewise.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* README: Update the email address best suited to discussing
feature requests, and also link to the list of previously
discussed and rejected requests.
|
|
* AUTHORS: Add my name.
* NEWS: Mention the new program.
* README: Reference the new program.
* src/numfmt.c: New file.
* src/.gitignore: Ignore the new binary.
* build-aux/gen-lists-of-programs.sh: Update.
* scripts/git-hooks/commit-msg: Allow numfmt: commit prefix.
* po/POTFILES.in: Add new c file.
* tests/misc/numfmt.pl: A new test file giving >93% coverage.
* tests/local.mk: Reference the new test.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* man/numfmt.x: A new template.
* doc/coreutils.texi: Document the new command.
|
|
Run "make update-copyright", but then also run this,
perl -pi -e 's/2\d\d\d-//' tests/sample-test
to make that one script use the single most recent year number.
|
|
* README: Adjust as per the recent changes introduced
when switching to non recursive make.
|
|
* README: Omit "su" from list of programs.
* src/su.c: Remove file.
* src/Makefile.am: Remove su-related rules and variables.
* tests/misc/su-fail: Remove test.
* tests/Makefile.am (TESTS): Remove misc/su-fail.
* tests/misc/invalid-opt: Remove su-related code.
* src/.gitignore: Remove su.
* man/su.x: Remove file.
* man/Makefile.am (su.1): Remove rule.
* po/POTFILES.in: Remove su.c from the list.
* TODO: Remove ancient entry.
* NEWS (Changes in behavior): Mention it.
* doc/coreutils.texi: Remove su-related description.
* AUTHORS: Remove su.
* m4/lib-check.m4 (cu_LIB_CHECK): Remove file/macro.
* configure.ac: Remove su-related code and sole use of cu_LIB_CHECK.
* scripts/git-hooks/commit-msg: Remove su from this list, too.
|
|
Run "make update-copyright".
|
|
* doc/coreutils.texi (Formatting the file names):
coreutils now quotes 'like this'.
* man/help2man:
* src/timeout.c (usage): Quote 'like this' in diagnostics.
* HACKING, Makefile.am, NEWS, README, README-hacking, TODO, cfg.mk:
* doc/Makefile.am, doc/coreutils.texi, m4/jm-macros.m4:
* man/Makefile.am, man/help2man, src/Makefile.am, src/copy.h:
* src/extract-magic, src/ls.c, src/pinky.c, src/pr.c, src/sort.c:
* src/split.c, src/timeout.c, src/who.c, tests/dd/skip-seek-past-file:
* tests/pr/pr-tests: Quote 'like this' in commentary.
* cfg.mk (old_NEWS_hash): Update due to changed old NEWS.
|
|
* README: Document vendor "make check" failure on those two systems.
Reported by Bruno Haible.
|
|
This program is compatible with other realpath(1)
implementations, and also incorporates relpath like support,
through the --relative options. The relpath support
was suggested by Peng Yu, who also provided an initial
implemenation of that functionality.
* AUTHORS: Add my name.
* NEWS: Mention the new command.
* README: Likewise.
* doc/coreutils.texi (realpath invocation): Add realpath info.
* man/Makefile.am (realpath.1): Add dependency.
* man/realpath.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/realpath.c.
* src/.gitignore: Exclude realpath.
* src/Makefile.am (EXTRA_PROGRAMS): Add realpath.
* src/realpath.c: New file.
* scripts/git-hooks/commit-msg: Add realpath to the list of prefixes.
* tests/Makefile.am (TESTS): Add misc/realpath.
* tests/misc/realpath: New file.
|
|
Run "make update-copyright".
|
|
Run "make update-copyright".
|
|
* README: Mention coreutils' long-standing policy on use of M-N
ranges in copyright year lists. Requested by Richard Stallman.
|
|
* gnulib: Update, for maint.mk improvements.
* HACKING: Use GFDL 1.3, not 1.2.
* NEWS: Likewise.
* README: Likewise.
* cfg.mk (old_NEWS_hash): Update accordingly.
* .gitignore: Ignore file created by 'make update-NEWS-hash'.
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
* AUTHORS: Add my name.
* NEWS: Mention it.
* README: Likewise.
* bootstrap.conf (gnulib_modules): Add nproc.
* doc/coreutils.texi (nproc invocation): Add nproc info.
* man/Makefile.am (nproc.1): Add dependency.
* man/nproc.x: New template.
* man/.gitignore: Ignore generated man page.
* po/POTFILES.in: Add src/nproc.c.
* src/.gitignore: Exclude nproc.
* src/Makefile.am (EXTRA_PROGRAMS): Add nproc.
* src/nproc.c: New file.
* tests/Makefile.am (TESTS): Add misc/nproc-{avail,positive}.
* tests/misc/nproc-avail: New file.
* tests/misc/nproc-positive: New file.
|
|
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add stdbuf command to list.
* configure.ac: Only enable on ELF systems with GCC.
* cfg.mk (sc_system_h_headers): Use VC_LIST_EXCEPT rather than
VC_LIST, so we can add an exception, if needed.
* .x-sc_system_h_headers: New file. Exempt libstdbuf.c.
* Makefile.am (syntax_check_exceptions): Add .x-sc_system_h_headers.
* doc/coreutils.texi (stdbuf invocation): Add stdbuf info.
* man/.gitignore: Ignore generated manpage.
* src/.gitignore: Ignore stdbuf and libstdbuf.so binaries.
* man/Makefile.am (stdbuf.1): Add dependency.
* man/stdbuf.x: New file with example usage.
* po/POTFILES.in: Reference new command and shared library sources.
* src/Makefile.am (build_if_possible__progs): Add stdbuf and libstdbuf,
(pkglib_PROGRAMS): Reference optional shared lib,
(libstdbuf_so_LDADD): Ensure we don't link with non PIC libcoreutils.a.
(libstdbuf_so_LDFLAGS): Add -shared GCC option,
(libstdbuf_so_CFLAGS): Add -fPIC GCC option.
(check-README): Exclude libstbuf.
(check-AUTHORS): ditto.
(sc_tight_scope): Exclude functions starting with __.
* src/libstdbuf.c: The LD_PRELOAD shared library to control buffering.
* src/stdbuf.c: New file to setup env variables before execing command.
* tests/Makefile.am: Reference new test file.
* tests/misc/help-version: Set expected exit codes.
* tests/misc/invalid-opt: ditto.
* tests/misc/stdbuf: Add 9 tests.
|
|
* README: (Reporting bugs): List the bug-reporting address here, too,
not just in the following more test-oriented paragraph.
Reported by Tim Mooney.
All changes are no longer listed in version-controlled ChangeLog
files, so note that contributions are attributed in the commit logs.
Mention bootstrap.conf, now that it's the authoritative source of
minimal prerequisite program/version# pairs.
|
|
|
|
* NEWS: Add 2009 to copyright.
* README: Likewise.
* README-hacking: Likewise.
* TODO: Likewise.
* doc/Makefile.am: Likewise.
* m4/prereq.m4: Likewise.
* src/nl.c: Likewise.
* src/seq.c: Likewise.
* tests/cp/cp-i: Likewise.
* tests/install/install-C: Likewise.
* tests/install/install-C-root: Likewise.
* tests/install/install-C-selinux: Likewise.
* tests/misc/seq: Likewise.
* tests/mv/mv-n: Likewise.
|
|
* HACKING: Give an example of how to run a test in isolation.
* README: Fix/simplify example for running a single test.
* README-hacking: Reference the HACKING file.
|
|
* AUTHORS: Register as the author
* NEWS: Mention this change
* README: Add truncate command to list
* src/truncate.c: New command
* src/Makefile.am: Add truncate command to list to build
* src/.gitignore: Add truncate binary to list to ignore
* doc/coreutils.texi (truncate invocation): Add truncate info
* man/Makefile.am: Add truncate man page to list to build
* man/truncate.x: Add truncate man page template
* po/POTFILES.in: Add truncate to list to translate
* tests/Makefile.am: Add truncate tests
* tests/misc/help-version: Add support for new truncate command
* tests/misc/truncate-dangling-symlink: check dangling link ok
* tests/misc/truncate-dir-fail: ensure dirs fail
* tests/misc/truncate-fail-diag: validate messages for missing paths
* tests/misc/truncate-fifo: ensure fifos ignored
* tests/misc/truncate-no-create-missing: ensure -c option honoured
* tests/misc/truncate-overflow: check signed integer overflows
* tests/misc/truncate-owned-by-other: root permissions check
* tests/misc/truncate-parameters: check invalid parameter combinations
* tests/misc/truncate-relative: check invalid relative sizes
|
|
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add timeout command to list.
* src/timeout.c: New file.
* src/kill.c (operand2sig): Move function to its own file,
now that timeout.c will also use it.
* src/operand2sig.c (operand2sig): New file, extracted from kill.c.
* src/operand2sig.h (operand2sig): Declare.
* src/Makefile.am (EXTRA_PROGRAMS): Add timeout.
* src/.gitignore: Add timeout binary to list to ignore.
* doc/coreutils.texi (timeout invocation): Add timeout info.
(Signal specifications): New section, also referenced by kill.
* man/Makefile.am (timeout.1): Add dependency.
* man/timeout.x: New file.
* po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate.
* tests/Makefile.am (TESTS): Add the two new tests.
* tests/misc/help-version: Add support for new timeout command.
* tests/misc/invalid-opt: Add support for new timeout command.
* tests/misc/timeout: New file: check basic timeout operation.
* tests/misc/timeout-parameters: New file: check invalid parameter
combinations.
|
|
* README (Running tests as root): Also set PATH in suggested "sudo"
command. This avoids failure of at least tests/cp/cp-a-selinux
when the default PATH does not contain /sbin.
* tests/cp/cp-a-selinux: Don't redirect stderr to /dev/null.
"mkfs" was failing due to /sbin not being in PATH.
|
|
|
|
* README: Remove a note about failing tests on SunOS 4.
On Mac OS 10.5.1 (Darwin 9.1), you'll need --disable-acl.
(Running tests as root): Recommend using "check-root", not "check".
|
|
|
|
* NEWS: Mention this.
* README: Add mktemp to the list.
* AUTHORS: Add this: mktemp: Jim Meyering
* src/mktemp.c: New file.
* src/Makefile.am (bin_PROGRAMS): Add mktemp.
(mktemp_LDADD): Add $(LIB_GETHRXTIME).
* man/mktemp.x: New file.
* man/Makefile.am (dist_man_MANS): Add mktemp.1.
(mktemp.1): New dependency.
* man/.cvsignore: Add mktemp.1.
* man/.gitignore: New file.
* src/.cvsignore, src/.gitignore: Add mktemp.
* tests/misc/mktemp: New file.
* tests/misc/Makefile.am (TESTS): Add mktemp.
* tests/Coreutils.pm (run_tests): Give the POST-test function
access to stdout and stderr contents, so it can verify that
the named-on-stdout file/dir does indeed exist and has proper
permissions, etc.
[po/ChangeLog]
* POTFILES.in: Add src/mktemp.c.
|
|
* NEWS: Mention arch.
* README: Add arch to the list of programs.
* AUTHORS: Add arch.
* src/uname.c: Include "uname.h".
(PROGRAM_NAME): Handle arch, too.
(ARCH_AUTHORS): Define.
(uname_long_options, arch_long_options): Renamed and new globals.
(usage): Handle arch-mode as well as uname-mode.
(decode_switches): New function, extracted from main,
to handle arch-mode as well as uname-mode.
(main): Handle both modes.
* src/uname-arch.c: New program, alias for "uname -m".
* src/uname-uname.c: New file, default uname mode.
* src/uname.h: New file, uname modes.
* src/Makefile.am (EXTRA_PROGRAMS): Add arch.
(uname_SOURCES, arch_SOURCES): Define.
* man/arch.x: New file.
* man/Makefile.am (dist_man_MANS): Add arch.1.
(arch.1): New dependency.
* tests/misc/arch: New test, compare "arch" with "uname -m"
* configure.ac (OPTIONAL_BIN_PROGS): Add arch.
(MAN): Add arch.1.
* .x-sc_require_config_h: Exempt uname-arch.c and uname-uname.c
from the always-include-<config.h> rule.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jim Meyering <jim@meyering.net>
|
|
for whose who start from
cloned/checked-out sources rather than from a distribution tarball.
Reported by Steve Ward.
* THANKS: Add Steve Ward.
Signed-off-by: Jim Meyering <jim@meyering.net>
|
|
* src/Makefile.am (bin_PROGRAMS): Add runcon.
(runcon_LDADD): Define.
* README: Add runcon to the list of programs.
* AUTHORS: Add this: runcon: Russell Coker
* tests/help-version: Add runcon as an exception.
* man/Makefile.am (dist_man_MANS): Add runcon.1.
(runcon.1): New dependency.
* po/POTFILES.in: Add src/runcon.c.
|
|
* gl/modules/selinux-at: New module. Check for libselinux and set
LIB_SELINUX here, unconditionally, rather than depending on
the configure-time --enable-selinux option.
* gl/modules/selinux-h: New module.
* bootstrap.conf (gnulib_modules): Add selinux-at.
* gl/lib/selinux-at.c, gl/lib/selinux-at.h: New files.
* gl/lib/se-selinux_.h: New file.
* gl/lib/se-context_.h: New file.
* gl/m4/selinux-selinux-h.m4: New file.
* gl/m4/selinux-context-h.m4: New file.
* src/Makefile.am (bin_PROGRAMS): Add chcon.
(chcon_LDADD): Define.
* README: Add chcon to the list of programs.
* src/chcon.c: Rewrite the original (Red Hat) chcon to use fts.
|
|
* src/Makefile.am (check-README): Substitute s/ginstall/install/.
|
|
Reported by Bruno Haible.
|
|
|
|
|
|
|
|
|
|
|
