| Age | Commit message (Collapse) | Author |
|---|
|
* NEWS: Provide a blurb about recent gnulib improvements. Fix typo
in readlink blurb.
|
|
* bootstrap.conf (obsolete_gnulib_modules): Move rename...
(gnulib_modules): ...here. Add symlink.
* NEWS: Document the change in readlink.
* doc/coreutils.texi (readlink invocation): Likewise.
* tests/readlink/can-f: Update test to new semantics, and add test
of loop.
|
|
* src/ls.c (print_color_indicator): Use consistent syntax for
all file and directory subtypes, and fall back to the color
of the base type if there is no enabled color for the subtype.
This allows turning off specific colors for o+w dirs for example.
* tests/ls/color-dtype-dir: Add a case to test that turning off
coloring for o+w directories, falls back to standard dir color.
* NEWS: Mention the fix
Introduced by commit ac467814, 2005-09-05,
"Colorize set-user-ID ... files and sticky ... directories."
|
|
* NEWS: It is an old bug.
|
|
A valid command like "touch -t 197101010000.60 F" would fail due
to the suffix of ".60". This bug is fixed via the latest change
to gnulib's posixtm module.
* tests/touch/60-seconds: New test.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
|
|
* src/copy.c (copy_reg): Temporarily set u+rw on the destination file
to allow GNU/Linux to set xattrs.
* tests/misc/xattr: Test that change.
* NEWS (Bug fixes): Mention it.
Reported by Ernest N. Mamikonyan.
|
|
* NEWS: Use a slightly less technical description.
Suggested by Andreas Schwab.
|
|
* NEWS (rm -r, without -f): Mention that the N in "O(N)" represents
hierarchy depth. Suggested by Ralf Wildenhues.
(rm -r, standards conformance): Make wording more accurate.
|
|
* src/id.c (print_full_info) [POSIXLY_CORRECT]: Don't print context.
Reported by Ulrich Drepper.
* NEWS (Changes in behavior): Mention it.
* doc/coreutils.texi (id invocation): Document that id also prints the
security context, when possible, and when POSIXLY_CORRECT is not set.
* tests/id/no-context: New file. Test for this.
* tests/Makefile.am (TESTS): Add it.
|
|
where N is the depth of the deepest hierarchy rm is processing.
* src/remove.c (write_protected_non_symlink): Use faccessat to
avoid O(N)-per-entry cost of calling euidaccess.
* m4/jm-macros.m4 (coreutils_MACROS): Check for faccessat.
* NEWS (Improvements): Mention it.
|
|
* remove.c: Don't include "unlinkdir.h"; no longer used.
Do not include <setjmp.h> or "cycle-check.h". Likewise.
Include "xfts.h".
(dir_name, dir_len): Remove definitions.
(CONSECUTIVE_READDIR_UNLINK_THRESHOLD): Likewise.
(INODE_SORT_DIR_ENTRIES_THRESHOLD, NEED_REWIND, D_TYPE): Likewise.
(struct dirstack_state, Dirstack_state): Likewise.
(g_buf, g_n_allocated): Remove declarations.
(hash_freer, hash_compare_strings, rm_malloc): Remove functions.
(rm_free, push_dir, top_dir, pop_dir, right_justify): Likewise.
(full_filename0, xfull_filename, full_filename_): Likewise.
(AD_stack_height, AD_stack_top, AD_stack_pop, AD_stack_clear): Likewise.
(obstack_init_minimal, ds_init, ds_clear, ds_free): Likewise.
(AD_pop_and_chdir, AD_ensure_initialized, AD_mark_helper): Likewise.
(AD_mark_as_unremovable, AD_mark_current_as_unremovable): Likewise.
(AD_push_initial, AD_push, AD_push, AD_is_removable): Likewise.
(write_protected_non_symlink): Change 3rd parameter from
dirstack_state "ds" to full_name.
(prompt): Adjust parameters. Now, state comes from FTS/FTSENT pair.
Those replace fd_cwd and "ds". Remove "filename". Remove pdirent_type
in favor of new "is_dir" parameter. Rename is_empty to is_empty_p.
(DO_RMDIR, DO_UNLINK): Remove definitions.
(remove_entry, fd_to_subdirp, compare_ino): Remove functions.
(dirent_count, dirent_inode_sort_may_be_useful): Likewise.
(preprocess_dir): Likewise.
(fts_skip_tree, mark_ancestor_dirs, excise, rm_fts): New functions.
(remove_cwd_entries, remove_dir, rm_1): Remove functions.
(rm): Rewrite as a simple loop calling fts_read and dispatching
each entry via rm_fts.
* src/rm.c (main): Adapt to new signature of rm().
* bootstrap.conf (gnulib_modules): Remove unlinkdir, no longer used.
* src/Makefile.am (sc_tight_scope): Also recognize an extern "enum"
declaration.
* tests/rm/empty-name: Adjust expected output to match new diagnostic.
* NEWS (Improvements): Mention it.
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
|
* NEWS: Record release date.
|
|
Before this change, :>f; ln -T f no-such/ would succeed on Solaris 10.
After it, ln fails, as it should: ln: accessing `z/': Not a directory
The command, link f no-such/, had the same problem on that system.
* bootstrap.conf (gnulib_modules): Add "link".
* tests/ln/slash-decorated-nonexistent-dest: New test.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Portability): Mention the improvement.
|
|
* src/dd.c (dd_copy) [C_UNBLOCK]: Always print the final newline for
non-empty output, not just when output size is a multiple of cbs.
* doc/coreutils.texi (dd invocation) [conv=unblock]: Mention that dd
prints a newline after each output record, not just when replacing
trailing spaces.
Reported by Ulrich Drepper.
* tests/dd/unblock: New file. Test for this.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
|
|
* src/tail.c (main): Adapt piped-stdin test to use the same isapipe,
test as was used in the preceding POSIXLY_CORRECT condition.
Remove the now-subsumed POSIXLY_CORRECT test.
Reported by Pádraig Brady.
* doc/coreutils.texi (tail invocation): Document this change.
* NEWS (Changes in behavior): Reclassify, clarify.
|
|
* src/tail.c (main): Tailing a pipe "forever" is not useful,
and POSIX specifies that tail ignore the -f when there is no
file argument and stdin is a FIFO or pipe. So we do that.
In addition, GNU tail excludes "-" arguments from the list of files
to tail forever, when the associated file descriptor is connected
to a FIFO or pipe. Before this change, ":|tail -f" would hang.
Reported by Ren Yang and Ulrich Drepper.
* tests/tail-2/pipe-f: Test for this.
* tests/tail-2/pipe-f2: Ensure tail doesn't exit early for a fifo.
* tests/Makefile.am (TESTS): Add these tests.
* NEWS (POSIX conformance): Mention it.
|
|
* NEWS (dd): Tweak wording.
Two blank lines between sections.
|
|
* src/tail.c (main) [HAVE_INOTIFY]: When stdin (i.e., "-", or no args,
but not /dev/stdin) is specified on the command line, don't use inotify.
Reported by Bill Brelsford in <http://bugs.debian.org/545422>.
* tests/tail-2/follow-stdin: New file. Test for this.
* tests/Makefile.am (TESTS): Add the test.
* NEWS (Bug fixes): Mention it.
This bug was introduced in coreutils-7.5 via commit ae494d4b,
2009-06-02, "tail: use inotify if it is available".
|
|
* src/tail.c (main): Flush any output from tail_file,
before calling tail_forever_inotify, which can block.
* tests/tail-2/flush-initial: New file. Test for the bug.
* tests/Makefile.am (TESTS): Add tail-2/flush-initial.
* NEWS (Bug fixes): Mention it.
This bug was introduced in coreutils-7.5 via commit ae494d4b,
2009-06-02, "tail: use inotify if it is available".
|
|
* src/df.c (main): If open or fstat fails when we're trying to ensure
that all arg-partitions are automounted, fall back on using stat.
Inspired by the report and patch from Olivier Fourdan in
http://bugzilla.redhat.com/520630.
* NEWS (Bug fixes): Mention it.
* tests/df/unreadable: New test for the above.
* tests/Makefile.am (TESTS): Add df/unreadable.
The bug was introduced in coreutils-7.3 via commit dbd17157,
2009-04-28, "df: use open(2), not stat, to trigger automounting".
|
|
* src/copy.c (copy_reg): Don't return from the function after an
unsuccessful and required preservation of extended attributes.
This resulted in leaking the copy buffer and file descriptors.
* NEWS (Bug fixes): Mention the fix.
The bug was introduced in coreutils-7.1 via commit 0889381c, 2009-01-23,
"cp/mv: add xattr support".
|
|
On most unix- and linux-based kernels, ls -i DIR_CONTAINING_MOUNT_POINT
would print the wrong inode number for any entry that is a mount point.
It would do that by relying on readdir's dirent.d_ino values, while
most readdir implementations return the inode number of the underlying,
inaccessible directory. Thus, it is not consistent with what you'd
get when applying stat to the same entry. This bug led to surprising
results like "ls -i" and "ls -i --color" printing different numbers (ls
must usually "stat" a file to colorize its name). This change makes it
so that on offending systems, ls must stat non-command-line-arguments
for which otherwise it would be able to use "for free" dirent.d_ino
values. Regardless of this change, ls is already required to stat every
command-line argument. Note: versions of GNU ls prior to coreutils-6.0
did not perform the invalid optimization, and hence always printed
correct inode numbers. Thus, for the sake of correctness, ls -i is
forgoing the readdir optimization, for any kernel (including linux!)
with POSIX-nonconforming readdir. Note that currently, only Cygwin has
been agile enough to conform.
* src/ls.c (RELIABLE_D_INO): Define.
(print_dir): Use it.
For plenty of discussion, see this long thread:
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/14020
This bug was introduced by the 2006-02-26 commit, 33eb3efe:
"In ls, avoid calling stat for --inode (-i), when possible."
* tests/ls/readdir-mountpoint-inode: New test.
* tests/Makefile.am (TESTS): Add it.
* tests/ls/stat-vs-dirent: Don't suppress failure of this test,
now that ls -i is fixed. Though note that it doesn't test well,
since it compares only the always-stat'd command-line arguments.
* NEWS (Bug fixes): Mention it.
|
|
* src/copy.c (copy_reg): When cloning only skip the data copying
* tests/cp/reflink-perm: New test to check times and modes copied
* tests/Makefile.am: Reference the new test
* NEWS: Mention the fix
|
|
* doc/coreutils.texi (cp invocation): Document the new
"auto" and "always" options to --reflink.
* src/copy.c (copy_reg): Fall back to a standard copy
when reflink() is not supported and --reflink=auto specified.
* src/copy.h [struct cp_options] (reflink): Change type s/bool/enum/.
* src/cp.c (usage): Describe the --reflink={always,auto} options
and expand a little on what --reflink does.
(main): parse the new parameters to --reflink and allow all
--sparse options with --reflink=auto.
* src/install.c (cp_option_init): Init the enum instead of bool.
* src/mv.c (cp_option_init): Likewise.
* tests/cp/reflink-auto: A new test for falling back to normal copy.
* tests/Makefile.am: Reference the new test.
* NEWS: Mention the new feature.
|
|
* src/dd.c (maybe_close_stdout): Always flush stderr; regression
introduced in commit 381e69ea.
* tests/misc/close-stdout (p): Use consistent style.
* tests/dd/stderr: New test, borrowing from misc/close-stdout.
* tests/Makefile.am (TESTS): Run it.
* NEWS: Mention this.
|
|
...when run on a kernel older than what was implied by headers and
libraries tested at configure time.
* src/copy.c (utimens_symlink): Ignore failure when errno == ENOSYS.
* NEWS (Bug fixes): Mention it.
Reported by Todd Zullinger and Kamil Dudka.
Details in this thread:
http://thread.gmane.org/gmane.linux.redhat.fedora.devel/119834
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
|
* NEWS: Record release date.
|
|
* NEWS: Mention the change.
* doc/coreutils.texi: Document the new --line-increment option.
* src/nl.c (struct option): Add --line-increment,
(usage): Describe it,
(main): Use it.
|
|
* NEWS: Remove the description associated with the removed
experimental code which unconditionally tried to reflink() on copy.
Also clarify where --reflink works exactly.
|
|
* src/dd.c (main): Install the signal handlers at startup
rather than just before the copy starts. In this way signals
received before the copy (like during a slow truncate for e.g.)
will be deferred and handled consistently.
* THANKS: Add Bernhard's email address.
* NEWS: Mention the fix.
Reported by Bernhard Voelker.
|
|
* NEWS: Mention it.
* doc/coreutils.texi (cp invocation): Describe it.
* src/copy.h (struct cp_options) [reflink]: New member.
* src/copy.c (usage): Describe it.
(copy_reg): If reflink is true try to clone the file.
(main): Check for --reflink.
(cp_option_init): Initialize the new member.
* src/install.c (cp_option_init): Initialize the new member.
* src/mv.c (cp_option_init): Likewise.
* tests/cp/sparse: Add a new test case.
|
|
dd oflag=direct would fail to copy a file with size that is
not a multiple of 512 (destination file system specific)
* NEWS (Bug fixes): Mention it.
* src/dd.c (iwrite): Turn off O_DIRECT for any
smaller-than-obs-sized write. Don't bother to restore it.
* tests/dd/direct: New test for the above.
* tests/Makefile.am (TESTS): Add dd/direct.
* doc/coreutils.texi (dd invocation): Mention oflag=direct
buffer size restriction.
Details in http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/17586
Reported by Eric Sandeen.
|
|
* src/copy.c (utimensat_if_possible): New function.
(copy_internal): Remove variable, "preserve_metadata".
Replace with "dest_is_symlink". That covers all cases but one:
the one in which cp --link has created hard links to non-directories.
In that case, there is no need to update attributes of the links.
Use utimensat_if_possible, to preserve timestamps of symlinks.
* NEWS (New features): Mention this.
* tests/Makefile.am (TESTS): Add cp/preserve-slink-time.
* tests/cp/preserve-slink-time: New file.
* m4/jm-macros.m4 (coreutils_MACROS): Test for utimensat.
Reported in http://bugzilla.redhat.com/230866
|
|
* m4/jm-macros.m4: Pull in SELinux libraries while checking for
matchpathcon_init_prefix (). Emit configure warning when not found
with SELinux enabled.
* NEWS (Bug fixes): Mention it.
The bug was introduced in coreutils-7.0 via commit 0647f3eb, 2008-06-02,
"accommodate older SELinux which lacks matchpathcon_init_prefix".
|
|
* NEWS (New features): Mention it.
|
|
* src/ls.c (print_dir): Emit "$dir_name:\n" *before* accumulating (and
possibly printing) directory entry names.
The bug was introduced in coreutils-7.0 via commit
8d974b00, 2008-07-30, "ls -U1 now uses constant memory".
Reported by Julian Bradfield.
* NEWS (Bug fixes): Mention it.
|
|
* NEWS: Say why inotify was used
|
|
* AUTHORS: Register as the author.
* NEWS: Mention this change.
* README: Add stdbuf command to list.
* configure.ac: Only enable on ELF systems with GCC.
* cfg.mk (sc_system_h_headers): Use VC_LIST_EXCEPT rather than
VC_LIST, so we can add an exception, if needed.
* .x-sc_system_h_headers: New file. Exempt libstdbuf.c.
* Makefile.am (syntax_check_exceptions): Add .x-sc_system_h_headers.
* doc/coreutils.texi (stdbuf invocation): Add stdbuf info.
* man/.gitignore: Ignore generated manpage.
* src/.gitignore: Ignore stdbuf and libstdbuf.so binaries.
* man/Makefile.am (stdbuf.1): Add dependency.
* man/stdbuf.x: New file with example usage.
* po/POTFILES.in: Reference new command and shared library sources.
* src/Makefile.am (build_if_possible__progs): Add stdbuf and libstdbuf,
(pkglib_PROGRAMS): Reference optional shared lib,
(libstdbuf_so_LDADD): Ensure we don't link with non PIC libcoreutils.a.
(libstdbuf_so_LDFLAGS): Add -shared GCC option,
(libstdbuf_so_CFLAGS): Add -fPIC GCC option.
(check-README): Exclude libstbuf.
(check-AUTHORS): ditto.
(sc_tight_scope): Exclude functions starting with __.
* src/libstdbuf.c: The LD_PRELOAD shared library to control buffering.
* src/stdbuf.c: New file to setup env variables before execing command.
* tests/Makefile.am: Reference new test file.
* tests/misc/help-version: Set expected exit codes.
* tests/misc/invalid-opt: ditto.
* tests/misc/stdbuf: Add 9 tests.
|
|
* NEWS: Document the new feature.
* m4/jm-macros.m4: Check if inotify is present.
* src/tail.c (tail_forever_inotify): New function.
(main): Use the inotify-based function, if possible.
* tests/Makefile.am: Add new tests for tail.
* tests/test-lib.sh (require_proc_pid_status_, get_process_status_):
New functions.
* tests/tail-2/pid: New file.
* tests/tail-2/wait: New file.
* tests/tail-2/tail-n0f: Refactor code into the test-lib.sh
require_proc_pid_status_ function.
|
|
* NEWS: Mention the fix
* THANKS: Add Cliff Miller
* src/sort.c (keycompare): Ensure lima >= texta
* tests/misc/sort: Add 3 corresponding tests
Signed-off-by: Pádraig Brady <P@draigBrady.com>
|
|
* src/ls.c: Rename hl->mh, do not colorize files with multiple
hard links by default.
* src/dircolors.c: Rename HARDLINK -> MULTIHARDLINK, hl -> mh.
* src/dircolors.hin: Do not colorize files with multiple hard links by
default.
* tests/Makefile.am: Rename the test case accordingly.
* tests/ls/multihardlink: Additionally test ls' default behavior
and factor out some duplication.
* NEWS: Mention the change in behavior.
|
|
* NEWS: Document the new option
* doc/coreutils.texi (sort invocation): ditto
* src/sort.c (main): handle the new --human-numeric-sort option (-h).
(human_numcompare): A new function to compare SI and IEC suffixes
before falling back to the standard --numeric comparison.
(find_unit_order): A new helper function to find the order
of magnitude of a number string as determined by its suffix.
(check_mixed_SI_IEC): A new helper function to exit with error
if both SI and IEC suffixes are presented.
* tests/misc/sort: Add 8 tests to test the new functionality.
* THANKS: Update
|
|
* NEWS: Note chroot's new options.
* doc/coreutils.texi: Document them.
* src/chroot.c (main): Add support for --userspec and --groups.
* tests/Makefile.am (root-tests): Add chroot/credentials.
* tests/chroot/credentials: New file.
* tests/test-lib.sh: Define NON_ROOT_GROUP to a default value.
|
|
* src/truncate.c (main): Pass unsigned characters to isspace.
* NEWS: Mention this.
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
|
* NEWS (Build-related): Mention make check fixes.
|
|
* NEWS (Bug fixes): Mention the date-related fixes.
(Portability): Mention the ACL-related fixes on *BSD.
|
|
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
|
