Age | Commit message (Collapse) | Author |
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/5584121
du(1) uses the first file object of the two test files linked to the
same inode, 'd/f' and 'd/h', whatever the system returns first.
Use 'd/f' in both the expected and the actual output.
* test/du/inodes.sh: Change the expected output as described above
when returning the --all directory entries (without -l). Also replace
the name of the hardlink 'd/h' by 'd/f' in the actual output.
|
|
* doc/coreutils.texi (du invocation): @itemx -> @item.
|
|
* test/du/inodes.sh: In the cases where compare() fails, that function
would show the unified diff automatically. Therefore, remove the
excess "cat out".
In the cases where expecting an empty file, use compare() again
rather than the simpler "test -s" because possible error reports
will then include the file's content for the same reason as above.
|
|
* src/csplit.c (find_lines): Assert that load_buffer() updates the
global buffers, thus "b" will be non NULL, thus suppressing subsequent
NULL pointer derefence warnings.
(process_regexp): Avoid a redundant assignment of the "line" pointer.
(process_line_count): Likewise. Also reduce the "line" pointer scope.
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/5582213
* test/du/inodes.sh: Due to undefined order in returned directory
entries, the expected output might not match, so sort both expected
and actual output when returning --all directory entries.
Also use a simpler test for ensuring no errors are output.
|
|
This new option can be used to find directories with a huge
amount of files. The GNU find utility has the printf format
"%h" which prints the number of entries in a directory, but
this is non-cumulative and doesn't handle hard links.
* src/du.c (struct duinfo): Add new member for counting inodes.
(duinfo_init): Initialize inodes member with Zero.
(duinfo_set): Set inodes counter to 1.
(duinfo_add): Sum up the 2 given inodes counters.
(opt_inodes): Add new boolean flag to remember if the --inodes
option has been specified.
(INODES_OPTION): Add new enum value to be used ...
(long_options): ... here.
(usage): Add description of the new option.
(print_size): Pass inodes counter or size to print_only_size,
depending on the inodes mode.
(process_file): Adapt threshold handling: with --inodes, print or
elide the entries according to the struct member inodes.
(main): Add a case for accepting the new INODES_OPTION.
Print a warning diagnostic when --inodes is used together with the
option --apparent-size or -b.
Reset the output_block_size to 1 ... and thus ignoring the
options -m and -k.
* tests/du/inodes.sh: Add a new test.
* tests/local.mk (all_tests): Mention it.
* doc/coreutils.texi (du invocation): Document the new option.
* NEWS: Mention the new option.
|
|
src/copy.c (copy_internal): Use rmdir() rather than unlink()
when the source is a directory, so that empty directories
are replaced in the destination as per POSIX.
* tests/mv/part-rename.sh: Augment with various combinations.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/14763
|
|
* src/du.c (fill_mount_table): Use free_mount_entry() instead
of freeing struct members manually.
|
|
Some newer test scripts - partially ones from me - are not executable.
It does not seem to be a problem, but for consistency and to avoid
future problems on unusual platforms or shells change the permissions
by adding the executable bit.
* cfg.mk (sc_tests_executable): Add new syntax-check rule to ensure
that all test scripts are executable.
* tests/df/df-output.sh: Change file mode from 644 to 755.
* tests/du/threshold.sh: Likewise.
* tests/factor/run.sh: Likewise.
* tests/init.sh: Likewise.
* tests/misc/csplit-suppress-matched.pl: Likewise.
* tests/misc/numfmt.pl: Likewise.
* tests/tail-2/retry.sh: Likewise.
|
|
Include the number of arguments which rm received in the "Remove all
arguments?" prompt. This is useful in the, presumably, common case
where the arguments were not provided by hand, but instead were the
result of various shell expansions. A simple, if somewhat contrived,
example (assuming rm is aliased to rm -I) could be:
rm * .o
where the prompt "Remove 120 arguments?" is more likely to make
the user catch the problem.
* src/rm.c (main): Include correctly pluralized n_files
in the output message. Also remove the now redudant "all".
* tests/rm/interactive-always.sh: Adjust to the new prompt.
* tests/rm/interactive-once.sh: Likewise.
|
|
* src/dd.c (STATUS_NONE): Simplify the enum so that
it's more general than just suppressing transfer counts.
Then test this in all locations where non fatal diagnostics
are output.
* tests/dd/misc.sh: Ensure the diagnostic about
being unable to skip past the end of input is suppressed.
* NEWS: Mention the change in behavior.
Fixes http://bugs.gnu.org/14897
|
|
* src/head.c (elide_tail_lines_file): For seekable empty files,
or seekable files where the current offset is after the
end of the file, return immediately. Previously the short
circuit code could not be reached due to logic error.
Spotted by coverity.
|
|
Similarly to commit v8.21-84-g8d2da3f in src/uptime.c
avoid a "definitely lost" error from valgrind. Note this
only happens with pinky when compiled without optimization,
in which case certain paths aren't eliminated casuing
valgrind to trigger the message. Note also that coverity
flags this "resource leak" too.
* src/pinky.c (short_pinky): free utmp_buf for developer builds.
|
|
Avoid Valgrind reports of "definitely lost" items
and while at it, free all discarded mount entries
to minimize the amount of memory used.
* src/df.c (filter_mount_list): Use the newly exported
free_mount_entry() from gnulib to free all mount entries
as they're discarded.
|
|
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/5508873
* src/shuf.c (write_random_numbers): Convert to an int type
that matches the prinft format spec.
|
|
main(): Process new option. Replace input_numbers_option_used()
with a local variable. Re-organize argument processing.
usage(): Describe the new option.
(write_random_numbers): A new function to generate a
permutation of the specified input range with repetition.
(write_random_lines): Likewise for stdin and --echo.
(write_permuted_numbers): New function refactored from
write_permuted_output().
(write_permuted_lines): Likewise.
* tests/misc/shuf.sh: Add tests for --repetitions option.
* doc/coreutils.texi: Mention --repetitions, add examples.
* TODO: Mention an optimization to avoid needing to
read all of the input into memory with --repetitions.
* NEWS: Mention new shuf option.
|
|
* test/misc/shuf.sh: Add tests for erroneous conditions
like multiple '-o' and '--random-source'.
|
|
* src/df.c: Adjust indentation and spacing with has
gotten quite out of line in a couple of places.
|
|
* src/df.c (filter_mount_list): Initialize devlist->dev_num correctly
when unable to stat() a mount point. This will avoid possible invalid
deduplication done on the list due to use of uninitialized memory.
* tests/df/skip-duplicates.sh: Ensure this code path is exercised.
Also refactor the test to be table driven.
* NEWS: Mention the bug fix.
|
|
* src/uptime.c (uptime): Free utmp_buf returned from read_utmp,
to avoid a "definitely lost" warning from valgrind.
|
|
|
|
* tests/misc/shuf.sh: Restrict the test to the significant
case where we can't in fact read the "unreadable" file.
|
|
* src/stat.c (long_options): Remove the "context" option as it's
no longer referenced since commit v8.5-65-g13f3237
|
|
* src/mkdir.c (main): Move the variable ret and issuing the error
message into the body of the scontext-related if-block.
* src/mkfifo.c (main): Likewise.
* src/mknod.c (main): Likewise.
|
|
Consolidate all smack routines and checks in a module.
We replace and wrap the most commonly used smack routines,
which allows removing ifdefs throughout the code.
* gl/lib/smack.h: A new header containing the implementation
of the wrapped and replacement routines. Note the is_smack_enabled()
routine should be optimized out at compile time when compiled
on a system without libsmack.
* gl/modules/smack: Describe the new module and move the
configure time code here from ...
* m4/jm-macros.m4: ... here.
* bootstrap.conf: Reference the new module.
* src/id.c: Use the routines without ifdefs where possible.
* src/ls.c: Likewise.
* src/mkdir.c: Likewise.
* src/mkfifo.c: Likewise.
* src/mknod.c: Likewise.
|
|
* src/id.c (main): Be consistent with the SELinux case,
and only show errors in getting the security context
when -Z is specified.
|
|
Enable creation of SMACK security context with -Z command-line switch
if SMACK is enabled.
* mkdir.c (main): Set process security context to given SMACK label.
* mkfifo.c (main): Likewise.
* mknod.c (main): Likewise.
* src/local.mk: link mk{dir, fifo, nod} with libsmack.
* NEWS: Mention the new feature.
|
|
* man/df.x: Don't say that a dev node is always on the root file system.
* doc/coreutils.texi (df invocation): Likewise. Also state that the
device node to mounted file system interpretation is only done when
passed absolute paths to device nodes.
|
|
Enable showing of file SMACK security with '-Z' command-line switch
if SMACK is enabled. Showing SMACK context of a file does not strictly
require SMACK to be enabled but this required to make choice whether to
show SELinux or SMACK security context.
* src/ls.c (getfilecon_cache): Retrieve SMACK context if available.
(gobble_file): Handle SMACK context similarly to SELinux context.
* src/local.mk: Link lsl with libsmack.
* NEWS: Mention the new feature.
* .mailmap: Merge the Author's 2 email addresses.
|
|
This is consistent with the documented interface and
avoids any ambiguity in a user thinking that stdbuf without options
might reset to a "standard" buffering setup.
* src/stdbuf.c (set_libstdbuf_options): Indicate with the return value
whether any env variables were actually set.
(main): Fail unless some env variables were set.
* tests/misc/stdbuf.sh: Ensure this constraint is enforced.
* NEWS: Mention the small change in behavior.
|
|
* src/truncate.c (usage): Mention that --size is in bytes which
is by far the most common usage.
* doc/coreutils.texi (truncate invocation): Likewise. Also cross
reference the --io-blocks option.
Reported in http://bugs.gnu.org/14686
|
|
There was slight change to libsmack such that positive values are
reserved for returning length of the label for smack_new_label_from_*
functions.
* m4/jm-macros.m4: Set HAVE_SMACK when both smack_new_label_from_self()
and recently added smack_new_label_from_path() are present.
The latter's presence indicates the newer API of the former.
* src/id.c (main): Check that smack_new_label_from_self() < 0,
and not just non-zero.
|
|
* src/getlimits.c (print_float): Adjust to use the ftoastr module,
which uses the appropriate precision so that no info is lost.
* cfg.mk (sc_prohibit_continued_string_alpha_in_column_1): Exclude od.c
fixes http://bugs.gnu.org/14650
|
|
* .gitignore: Exclude the generated doc/manual directory,
and also the src/fs-latest-magic.h file referenced in README-release.
|
|
* src/du.c (usage): Clarify that --separate-dirs doesn't exclude
all directories.
* doc/coreutils.texi (du invocation): Avoid implying that -S
excludes the size of any non directory entries for a directory.
Also don't mention st_size as it's dependent on --apparent-size.
Reported by C de-Avillez in <https://launchpad.net/bugs/1187044>
|
|
For a file of size 1234 bytes, commit ca9aa759 had the side effect
of changing 'stat -c "%'s" file' from outputting "?s" to the nicer
"1,234", depending on locale. This is worth mentioning in the NEWS.
Resolves part of http://bugs.gnu.org/14556.
* NEWS: Mention 8.7 improvement in stat.
* cfg.mk (old_NEWS_hash): Adjust accordingly.
|
|
Notes tests/init.sh is still in sync with gnulib.
* bootstrap: Update to latest.
* gnulib: Update avoiding gnulib-test failures.
|
|
Prompted by the continuous integration build failure at:
http://hydra.nixos.org/build/5221053
* tests/tail-2/retry.sh: Ensure the 'out' file is truncated,
as it's used to arbitrate the run order of commands.
Relying on the truncation in the background tail command
is racy because the truncation can occur after the fork
of the background shell and thus wait4lines would not wait
for output to occur in 'out', which would mean that the
'missing' file could be populated by the time tail(1)
gets to process it.
|
|
src/date.c (usage): Make -u apparent in searches for UTC.
|
|
* src/od.c (PRINT_FIELDS): Declare "i" to be of type uintmax_t, so that
the numerator in the expression for "next_pad" does not overflow.
(print_named_ascii): Likewise.
(print_ascii): Likewise.
Bug introduced via commit v6.12-42-g20c0b87.
* tests/misc/od.pl: Exercise each of the three affected code paths.
* NEWS (Bug fixes): Mention it.
Reported by Rich Burridge.
|
|
* tests/misc/head-c.sh: Don't try to elide 1 exabytes, since on
32-bit systems, that number is not representable as a size_t.
This command would fail on 32-bit systems, where SIZE_MAX < 1E:
head --bytes=-E < /dev/null
Instead of "E", use $SSIZE_MAX.
For discussion, see http://bugs.gnu.org/13530
|
|
* tests/split/line-bytes.sh: Since we've limited virtual memory to
20MB, choose a smaller size, 1GiB (which is <= SIZE_MAX) rather than
1EiB, which is larger than SIZE_MAX on 32-bit systems.
I confirmed that this test still fails when the split.c-modifying
part of v8.21-58-gfec363c is backed out.
|
|
* tests/ls/block-size.sh (size_etc): The sed expression through which
we filtered the output of "ls -l ..." assumed that the user and group
name components of each line would not contain spaces. Avoid the
problem by using -og instead of -l, thus not printing either of those
fields. Adjust the sed expression accordingly.
|
|
* tests/misc/numfmt.pl: Avoid a spurious failure when
/bin/sh is dash (as can happen on Debian systems).
|
|
* src/stat.c (print_stat): Omit unnecessary calls to setpwent, setgrent.
Problem reported by Fridolín Pokorný in <http://bugs.gnu.org/14462>.
|
|
* src/split.c (line_bytes_split): Rewrite to only buffer
when necessary. I.E. only increase the buffer when we've
already lines output in a split and we encounter a line
larger than the input buffer size, in which case a hold
buffer will be increased in increments of the input buffer size.
(lines_rr): Use the more abstract xalloc_die() just like
we did in line_bytes_split(), rather than explicitly
printing the "memory exhausted" message and exiting.
* tests/split/line-bytes.sh: Add a new test for this
function which previously had no test coverage.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
Fixes http://bugs.gnu.org/13537
|
|
* configure.ac: If clang, add -Wno-format-extra-args and
-Wno-tautological-constant-out-of-range-compare.
* gl/lib/rand-isaac.c (ind):
* gl/lib/randread.c (readisaac):
* src/ls.c (dev_ino_push, dev_ino_pop):
* src/sort.c (buffer_linelim):
* src/system.h (is_nul):
* src/tail.c (tail_forever_inotify):
Rewrite to avoid casts that clang dislikes.
It's good to avoid casts anyway.
* src/expr.c (integer_overflow): Declare only if it exists.
(die): Remove; unused.
* src/ls.c (dev_ino_push): New function, replacing ...
(DEV_INO_PUSH): ... this removed macro. All uses changed.
(decode_switches): Rewrite "str"+i to &str[i].
|
|
|
|
* tests/misc/cut-huge-range.sh (subtract_one): New string.
(CUT_MAX): Don't pass a too-large integer to 'expr'.
|